QM-Customer Info record-QV51(Need Table & field for - "Before delivery" -)
Hi friends,
In the qm Customer info record(qv51), there are 3 radio buttons under quality inspection field-(Before delivery,After delivery,By customer).. I am checking the table " QVDM" .I am able to locate the fields (1.After delivery,and 2.By customer ) .
But I couldn't locate the field for " Before delivery" in the table QVDM. 1. Is it in some other table ? 2. If it is so, in which table I can find the field for " Before delivery" ? Help me.
Regards,
Mani
By default system assumes before delivery unless one of the indicators "After delviery" or "By Customer" is set.
There is no specific indicator for "Before Delivery"
FF
Similar Messages
-
Net Price of Info record appearing in table EINE for Invalid dates
Dear Expert
Net Price ( Purchasing data view ) for Info record should be zero if Info record is not having valid price ( not within Validity dates) but still its appearing in Table EINE,please advice why this is happening ?how to resolve this problemHi,
Please check the OSS note 369511. You need to run program RM06INPO AFTER the validity has become active.
BR,
Patil -
Need table field for checked in or checked out in CV03N
How to know whether DMS document locked or not through table access
Hi,
basically you can check whether your DMS doccument is locked or not by using a LOAD command it has different modes and with the help of these modes you can check the status -
T.Code of Customer Info Record and Sampling procedure
Pls Tell me T.Code of Customer info Record and Sampling procedure.
Hi Vinay,
Are you sure u want Customer Inforecord, as such I dont think there is no such inforecord.
We have inforecords as standard,pipeline.subcon,consignment...plz chk the link below :
http://help.sap.com/saphelp_47x200/helpdata/en/75/ee1fa755c811d189900000e8322d00/frameset.htm
Also for sampling procedure, plz chk the link below :
http://help.sap.com/saphelp_47x200/helpdata/en/2d/350bf2448c11d189420000e829fbbd/frameset.htm
BR,
Krishna -
Mass maintenance to Customer Info Records
Is there a standard program to do mass maintenance to customer info records? This would be to do a mass creation of and mass deletion of customer info records.
Please advise.
Thanks.Hi,
Pls check the Function module RV_CUSTOMER_MATERIAL_INFO with the help of an ABAPer. Also there are some more FMs
RV_CUSTOMER_MATERIAL_UPDATE
RV_CUSTOMER_MATERIAL_UPDATE_C
One of these FMs will help you.
If the number of records are less than 5000 or so, you can even try doing this by means of CATT. If records are morethan 20K, then it is better to do it by direct update by means of Function modules or BAPIs.
Hope this helps -
Quality inspection in Delivery,Customer Return and Customer info record
Quality inspection in Delivery and Customer return
Dear Friends,
Here is my Question
For Delivery inspection i am using inspection type 10 meaning when ever there is goods issue during delivery inspection lot is created ,RR and UD post stock to Unrestricted if pass and unblocked stock if fail or rework or change to another customer and COA is printed if UD is pas
is my understanding is correct
For Customer return i maitanin inspection type 06 , Meaning when ever there is customer return , GR is done in IM and inspection lot is created,RR and UD and post the stock to unrestricted and Blocked stock if fails
is my understading is correct in the above scenario
Also where this Customer info record is used and related with inspection
From my understanding Customer info record is used to link sales organization and customer to the material in Quality inspection
so that by means of the Quality inspection indicator in Custm info record can control the inspection lot creation before delivery or after delivery and what is customer indicator
Please can some give me a clear picture of the above , sorry to ask so many questions in one thread
Thanks & Regards
RajDear Raju,
Let me make you clear
1) Customer info record stores data related to material / customer. You can decide whether the inspection has to be before delivery, after delivery or at the customer place.
2)Inspection lot 10 is created when you save the delivery to a particular customer. Inspection 10 doesnt have stock posting tab. If you have selected in Customer info record inspection before delivery then only after you give the ud for the lot it will allow for PGI. You cannot stock posting to any stock as in 01 or 04.
neither you can change the customer.
3) For customer return inspection 06 inspection type will not give stock posting tab. It is a stock irrelevant inspection type. You can 05 inspection for the same. it helps in stock posting
hope this helps
Regards
gajesh -
can any one tell me what the transaction for customer info record and how can we upload data into it
Hi Naresh,
actually the transaction is xd01.
abapprogramming.blogspot.com/2007/11/abap-bdc-sample-code-xd01.html - 119k
abapprogramming.blogspot.com/2007/11/abap-idocs-outlook.html - 106k
abapcode.blogspot.com/2007/05/step-by-step-guide-for-using-lsmw-to.html - 148k
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/59069d90-0201-0010-fd81-d5e11994d8b5
but you refer the above urls for additional ionformation ok.
for any issues reply me.
reward me points if it helps you.
regards
karthik. -
Incomplete Control Deliveries add new table-field for Incompleteness Proced
Incompletion Control for Deliveries add a new table-field for Incompleteness Procedure G (Delivery header)
Hello,
I'm trying to add a new field for Incompleteness Procedure G (Delivery header), but when I try to customize the procedure G with new fields, I donu2019t find the field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
Foreign Trade/Customs tables are not included like an option for new entries in the customizing of Incompleteness Procedure G, and Iu2019ve to prevent that users save the outbound delivery without entry a valid value for EIKP-EXPVZ (EIKP-EXPVZ= ModeOfTrnsprt-Border).
Otherwise, when users are creating the SD Invoice there is an error for create the Accounting document because Foreign Trade/Customs information is incomplete.
So Iu2019d like to know If is possible to add a new tables ( and fields) to use in the customizing for Incompleteness Procedure for Outbound Deliveries (procedure G).
Thanks!!
Edited by: Ariana Serrano Aguila on Sep 2, 2010 5:19 PMHello,
I'm trying to add a new field for Incompleteness Procedure G (Delivery header)
, but when I try to customize the procedure G with new fields, I donu2019t find the
field that I need ModeOfTrnsprt-Border (EIKP-EXPVZ).
See as far as the table is concerned, the basic reason why it is not getting populated as SAP stores the possible values at the domain level. So i think the right approach to add the table would be to get access key for the domain and then add the new table name at domain level. Please reach out for help from ABAPer in this matter.
You can also use User exit to met this requirement and the appropriate user exit will be as below:
1.MV50AFZL
2. MV50AFZ1
Regards,
Sarthak -
Customer no to populate the Assignment field for Sales A/c using sort key
Dear All,
In 6.0, I am trying to get the Customer number to populate the Assignment field for Sales Account
We have set the sales account to a 031 sort key - sort by customer, in FS00. When 031 is set, SAP goes to the BSEG table and looks at the KUNNR (customer) field and populates the Assignment field with what is in the KUNNR field of BSEG.
The problem is: the customer number (KUNNR) does not contain any data in BSEG.
The KUNNR field of all the other account lines for the document number are blank.
Is it possible to bring the field in the General Ledger display?
Does anyone know of a user exit or other solution?
Thanks,
GovHi,
Check with SD consultant and use Copy control. -
TABLE/FIELD FOR SALES ORDER'S SHIP TO LOCATION
Hi everyone,
Does anyone tell me what is the related tables/fields for Sales Order's Ship To Location? Since I want to display the Ship To Location information in the Oracle Report in Oracle Apps R11i.
I tried to use the following SQL select statement to retrieve the Ship to address:-
-- SHIP TO LOCATION
select a.address_id, c.customer_name, C.CUSTOMER_ID, A.SITE_USE_ID from ra_Site_uses_all a, ra_addresses_all b, ra_customers c
where a.site_use_code = 'SHIP_TO' and
a.status = 'A' and
b.address_id = a.address_id and
c.CUSTOMER_ID = b.CUSTOMER_ID and
b.status = 'A' and
c.customer_id in (select customer_id from ra_customers) and
c.status = 'A' and
c.customer_name like 'CLARION (H.K.)%'
But I found that the data is BILL TO address. Can anyone help me? Thanks.Hi all, I managed to solve my problem. Here's the query in case someone need it. Thanks
SELECT party.party_name "Send to" (SELECT party.party_name
FROM hz_cust_site_uses_all bill_su,
hz_cust_acct_sites_all bill_cas,
hz_party_sites bill_ps,
hz_locations bill_loc,
hz_parties party,
oe_order_headers_all h
WHERE h.invoice_to_org_id = bill_su.site_use_id
AND bill_su.cust_acct_site_id = bill_cas.cust_acct_site_id
AND bill_cas.party_site_id = bill_ps.party_site_id
AND bill_loc.location_id = bill_ps.location_id
AND bill_cas.party_site_id = bill_ps.party_site_id
AND bill_ps.party_id = party.party_id
AND h.order_number = 'your_order_number') "Invoice to"
FROM oe_order_headers_all h,
hz_cust_site_uses_all ship_su,
hz_cust_acct_sites_all ship_cas,
hz_party_sites ship_ps,
hz_locations ship_loc,
hz_parties party
WHERE h.ship_to_org_id = ship_su.site_use_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_su.cust_acct_site_id = ship_cas.cust_acct_site_id
AND ship_cas.party_site_id = ship_ps.party_site_id
AND ship_ps.party_id = party.party_id
AND ship_loc.location_id = ship_ps.location_id
AND h.order_number = 'your_order_number'; -
What is the table field for PO releaser in R/3 (4.7 Enterprise)?
Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hwHi
<b>Have you tried reading the details of the PO Releaser using the BAPIs ?</b>
BAPI_PO_GETRELINFO
BAPI_PO_GETITEMSREL
BAPI_PO_GETITEMSREL List Purchase Orders for Release (Approval): New as of 4.0A
BAPI_PO_GETRELINFO Display Detailed Release (Approval) Information on Purchase Order
BAPI_PO_RELEASE Release Purchase Orders
BAPI_PO_RESET_RELEASE Cancel Release of Purchase Orders
<u>Related link -></u>
Re: How to fetch data from back end for PO?
Hope this will help.
Do let me know.
Regards
- Atul -
Table field for PO releaser in R/3 (4.7 Enterprise)
Hi Gurus out there:
Do you know if there is a table field for PO releaser in R/3 (4.7 Enterprise)?
We use for e.g. the transaction ME29N to release a PO and I haven't been able to find a DB table where the PO releaser is stored.
In DB table EKKO I can find the fields FRGGR (Release group), FRGSX (Release strategy), FRGKE (Release Indicator), FRGZU (Release status) and FRGRL (Release Not Yet Completely Effected) but no information of the user who released the PO.
Many thanks in advance.
/hwMeanwhile I have found a solution to this problem:
CONCATENATE sy-mandt <ekko-ebeln> INTO tabkey.
SELECT SINGLE * FROM cdpos
WHERE objectclas = 'EINKBELEG'
AND objectid = <ekko-ebeln>
AND tabname = 'EKKO'
AND tabkey = tabkey
AND fname = 'FRGKE'
AND chngind = 'U'
AND value_new = '1'. " PO has been released
IF sy-subrc = 0.
SELECT SINGLE username
FROM cdhdr
INTO po_releaser
WHERE objectclas = 'EINKBELEG'
AND objectid = oitab-ebeln
AND changenr = cdpos-changenr.
ENDIF. -
Info record and source list mandatory for PO creation?
Hi Gurus,
Client wants to make Info record and source list mandatory for PO creation?
If Inforec and source list not available for that material, then user can't able to create PO.
How can I achieve this requirement?
Any user exit available?
pls help..Hi ,
SproMM-Purchasing -Source ListDefine Source List Requirement at Plant Level
If u mark the indicator then the Source list is mandatory for all the materials procured.
If u want for a speciic material , mark it in purchasing view of Material Master.
Inorder to create a source list , inforecord is mandatory -- this is by default Standard SAP .
Regards
Ramesh Ch -
Table Field for total value release in Contract agreements
Hi Gurus,
Please tell me the table field for release in contract agreements. It is showing a structure field RM06E-GSABW, which does not have any associated table.
Please let me know if any other way to get the same information.
Thanks,
Shibaji.Hi Shibaji,
you may try in the respective delivery LIPS-NETWR. Or check the where-used-list of data element NETWR.
Regards,
Clemens -
I am planning to buy macbook 15 retina display 16gn 512 gb i7 anything i need to look for before buying
Check your wallet before you enter the store?
Cause the thing's gonna take a big byte out of it.....
Maybe you are looking for
-
I CANT OPEN MY CLOUD APP I GET AN ERROR MESSAGE
I CANT OPEN MY CLOUD APP I GET AN ERROR MESSAGE WHAT CAN I DO
-
I'm not able with ipod touch to connect to internet through my wifi router, which is Sitecom 150N working fine with pc
-
Is there a virus scanner for iPhoto? Photos are superimposing on another?
One particular photo keeps superimposing onto many other photos so when they are opened only a black square reveals or else a black square with an exclamation mark in it. How do I detect a virus and wipe it out? Maddie
-
Unable to telnet Solaris 10 Box
Milestone service is seems to be offline. I have 02/05 release of solaris 10. But many times i have face this problem,but no solution found. Please guide me how to solve this problem. regards.. Sunny
-
Demantra - Create New Series - Mdp_matrix - Data Type String Issue
I created a new series (MDP_matrix) that has the data type as String. The display format is BLANK. I was able to load the data into mdp_matrix table for the series i created. However, when i look at the series in a worksheet, it does not display the