QM_DISCONTINUED INSPECTION LOTS IN MCVA
Dear QM experts,
When we execute MCVA report one can get the information about discontinued lots. Can anybody tell from where we can get the details of discontinued inspection lots? I tried through Extras->inspection lots option in MCVA. Unfortunately it gives the list of all inspection lots and not only of discontinued lots.
I guess while recording results in QA32 if the Results Record Status of any of the MICs does not reach to 5 i.e. processing is completed, it reflects in to MCVA report under discontinued lots column. Can we have a list of such inspection lots whose processing have not been completed? Any tables?
Thanking you,
Anand Rao
Hi Anand,
You can get the list of inspection lots with UD but no result recording with tcode QA32 .
You have to create the selection profile for this.
- Go to SPRO - Quality management - Quality inspection - Status managemnt - Define selection profile.
- create new entry
- give some name and description
- double click on selection condition to add following condition
- in status field add RREC (that is Results confirmed)
- tick checkbox not (this is to select insp lot without result recording)
- Save
Now in QA32, use this selection profile. Select radio button Select lots with usage decision .
Thus you will get what you need.
No development required
ragards
Edited by: hemant adep on Jul 31, 2009 5:34 PM
Similar Messages
-
Follow-up action : please help - Inspection Lot related
Hi,
I am having the following trouble:
Through MB02, a printout is generated to the local printer (LOCL).
However, through QA11, when we save, we have a custom follow-up action attached that pops-up a
dialog screen.
The follow up action is triggered when a usage decision is changed for the inspection lot.
The follow-up action (configured in IMG) calls a Function Module and a screen, which in turn populates
a value into a custom DB table (based on the buttons, on the screen, sending either to LOCL or to a
zebra printer).
Now, what has to happen is that after inserting the value into a custom table, it should also open a sapscript and output.
The Sapscript and print program are there, with the print program being created 3-4 years ago by someone
else. However, even though we have code in the print program to update nast, in turn creating a message
for output (1st the custom DB table is checked to see if the values match, MATNRCHARG), It does not update
NAST. When we go through MB02, it does, but this should happen automatically after selecting one of the radio
buttons on the original pop-up & selecting print.
Please help. I don't know what to do and can't enable a debugger from the pop-up and if going though QA11,
I can't get it to stop inside the print program (only inside the custom FM).
Cheers,
Johnhi
kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
regards
thyagarajan -
Creation of inspection lot 04 depending on production version
Hi Experts,
could you tell me if it is possible to create a Good Receipt inspection (lot origin 04) depending on the production version used ?
My material has 2 production versions:
0001 - production with process order
0002 - production with repetitve manufacturing
When I do a GR on process order, I do not want to create an inspection lot 04.
When I do a GR on product cost collector, I want to create an inspection lot 04.
As I have entered inspection types in material master data, I do not know how to do the distinction ?
Thanks in advance for your help
Best regards
AmauryHi
Check user exit
QBCK0003 |Extended QM check for goods receipt
Regards
Sujit -
Inspection lot is not getting updated in quant
Hi Experts,
Need your help..
I have posted two material doc with same material following is the consequences :
1.we have immediate TO creation process , so now we have 2 TO's and 2 inspection lots.
2.When i am doing UD for first inspection lot PCN does get created.
3.Now i do TO confirmation for putaway for TR and then TO creation and confirmation for PCN and material is in bin.
4.When i am confirming the TO(TR i.e putaway TO) ,Inspection lot is not getting updated in the quant due to which i am not able to convert PCN to TO
Because in quant i found previous inspection lot which is different from having in PCN document.
So is there any solution which will update the inspection lot in quant once we confirm TO(putaway TO) ?
Any help on this will be highly appreciated.
Regards,
OMHi jugen,
Thanks for you help but now i going for below development :
Once UD is done system will take the inspection lot from from the quant and will overwrite to the
newly created PCN
So that during PCN to TO creation (LU04) inspection lot will remain same both in quant and PCN .
Do you have any idea on this i mean where in QA32 tcode i have to write this logic ?
Thank you..
Regards, -
Inspection Characteristic is not being displayed in the inspection lot
I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
PraneetI have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply -
Vendor code in Stock Transfer Inspection Lot(08)
Hi Everybody,
I have noticed that when a Stock Transfer lot is created, the 'Data for lot orogin' tab in the Inspection Lot shows Vendor code in 'Data for goods receipt' section at times and at times Vendor code is not included in this section.
Please throw some light on the situations under which the vendor code is included and excluded.
Regards,
Manish.I can't say for sure but I would compare the triggering document. I.e. Exactly what material movement is used in each case and what type of document triggered it, (I.e. an STO order). Than look at those documents and see if and why a vendor number is available.
FF -
No inspection lot can be opened for this material and vendor -QA228
Hi every one !
Iam getting Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
we analyze the issue asfollow -
1.checked Quality Lot-Available
2.Quality info record- Availble
3. Quality plan is exist.
But stil throwing above Error.Hi,
Check the below threads,
[No inspection lot can be opened for this material and vendor;
[No inspection lot can be opened for this material and vendor; -
Hi All,
Report for the inspection lots that clear UD but still in inspection stock( no posting is done).?
Thnaks
vbrajDear Raj,
Please try report QVM2.
Best Regards,
Anand Rao -
Inspection lot quantity in manual inspection lot (T.Code-QA01)
Dear Experts,
I have activated inspection setup "89" with lot origin '89".I have activated this inspection set up to a material in QM view.
When i want to create a manual inspection lot through T.Code QA01, the inspection lot quantity is a required field. But i do not want to enter a quantity here. I want to create manual inspection lot without quantity. Is it possible?
If yes, please suggest how to proceed.
Your help is highly appriciable.
Regards
Vivekhi
Use User Exit :QPL10001
Description
You can use this enhancement to change all the fields when creating an
inspection lot. The function module is only run once.
You must be careful when using this enhancement since this can lead to
inconsistencies in inventory management. For example, if you change the
quantity fields.
Logic:
Logic will be when you are using a specific Material say MATNR : xyz .......then disable the Qty field LOSMENGE.
I hope this will help you
Regards
Sujit -
Inspection lot with Production Order
Hi friends,
I am PP consultant and need some help in setting up a scanario of Production order with inspection lot.
I need to setup a scenario where a inpspection lot is created from production order manually (not at the time of release). The purpose is to post few quantity of production order to scrap storage location. Inspection lot needs to be created only in certain production orders where some of the quantity has to be declared as scrap and that needs to be rejected with usage decision.
can any one please suggest the overview of such scenario.
Regards,
RohitDear Rohit,
You want to create a manual inspection lot only for the purpose of Scrapping and also want it to be done with Usage Decision.
You can not use inspection type 89, as it is not stock relevant (Inspection type for Miscellaneous inspection),
There is one another solution with inspection type 08( inspection for Material Movement), but it might look Lengthy.
1. Release a Production order. say 100 qty.
2. If during process, 10 is scrap, then perform Partial Confirmation of 10 Qty.; Stock will be in Unrestricted.
3. Now, through MB1B, transfer 10 qty from Unrestricted to QI.
4. As you have inspection type 08 active, System will create an Inspection lot for 10 Qty.
5. You can post this whole 10 qty to Scrap while giving Usage Decision.
I think, in your process, Scrapping is not done frequently, that is why you do not want inspection lot at every production order.
in that case this solution may solve your problem.
regards,
Amol
Edited by: Amolbook on Jan 12, 2012 3:13 PM -
Dear Experts,
Reqiurement as follow :
We have four plant like 1000,1001,1002,1003,1004
System creates inspection lot when we do GRN against in stock transfer PO when STO from
1000 to 1004, 1001 to 1004, 1002 to 1004, 1003 to 1004, as we have activated inspection type 08,01 in MMR.
My requirement is system should not create inspection lot when STO from 1003 to 1004 only.
We can not deactivate inspection type as we need inspection lot when STO from other plant.
Please help in this scenario.In QM, we can deactivate the quality for certain movement type.That means though QM is active in material master, if we are using any movement type for which QM is not active, it will not generate the inspection lot. For STO from plant 1003 to 1004, use the movement other 101 i.e copy of 101.
Copy 101 movement say as 901.Using following path deactivate QM for this new movement type 901.
SPRO - QM - Q. Insp - Insp lot creation - Insp for goods movement - Deactivate insp for movement type. Select the indicator "QM not active".
Now use movement type 901 for STO from plant 1003 to 1004.
Vishal Jonnalwar -
Inspection lot not created on GR for production order
I want to create an inspection lot upon receipt from production. Task list is set up. Inspection type 04 is assigned in material master. But when I do the goods receipt for a production order, inspection lot is not created. In the quantity tab of material document, I see that the staus GR doc is 7(Inspection lot is created at inbound delivery). I don't know where it is coming from.
Please help.I'm not sure what you mean by creating lot after receiving.
When you do a GR from production the proper inspection type is the 04 inspection type. Not 05. This is pretty standard SAP functionality.
Check the material movements for 101 (I assume you're using a 101 GR material movement), and make sure in config no one has deactivated QM for the material movement.
Then, make sure you start with a freash production order. Don't copy from a previous one.
FF -
Hi Experts,
I have created manually inspection lot.When I was trying to result recording,system show following error.
Characteristic results cannot be recorded for inspection lot 050000000250
Diagnosis
You cannot record any characteristic results for this inspection lot. The material master has been set up for the existing inspection type in such a way that results recording is not supported.
Please help.Hello
The inspection plan is missing for this lot. The lot will have CRTD status.
Please create in QP01 inspection plan with the usage you have maintained for 05 inspection. Assign this in QA02 > inspection specification > tasklist/spec Tab
please revert if require more clarification
Regards
gajesh -
Inspection lot should be created only for particular vendor
Hi
Can anyone please help in achieving the below scenario:
*Material has been assigned to the inspection type A (one time inspection) has been set as preffered and active in the inspection set up in the material master.
*Quality level has been created for material and vendor such that inspection should be carried out when next stage is 1 and no inspection should carried out when next stage is 2.
*Tasklist has been assigned with material and vendor .
Material can be supplied by different vendors,For this material, inspection should be done only for one vendor and for other vendors there should not be any inspection to be done and no inspection lot should be created.i.e Inspection lot should be created only for one vendor say AA whereas now inspection lot is getting created when goods receipt is done for the purchase order with other vendor BB.
My requirement is the inspection lot should not be created when goods receipt is done with other vendors say BB except AA.
Is there any other way other than using quality info record to achieve this.
I can try with DMR but the thing is there should not be inspection lot created while posting GR.
can anyone suggest me any other way to achieve this requirement.There are user exits when you create an inspection lot. One of those could be used to suppress the inspection lot. Have you looked at these? Have you researched any QM user exits yourself yet? This isn't the first time this specific question has been asked over the years.
It's not hard and there are lists of QM user exits available all over the internet.
Please do some research.
You can also assign vendors to inspection plans with a DMR that requires one inspection, and than after that creates all skip lot inspections which you automatically close by a batch job. The first lot can be manually forced closed. Thereaftter all receipts would be skipped. Not 100% but pretty darn close. This requires that you know which vendors to assign to which plan. Probably as much data maintenance as maintaing the Q-info records.
And yes.. your client needs to come up with better reasons than "I don't wanna..". It's part of a consultants job to convince them.
Craig -
Inspection Lot not generated, with MIGO 561
Hello All,
Please help me with this issue.
WHen i do MIGO with 561, inspection lot is not generated.
So there is a setting in spro, if we check that, inspection lot wont be generated.
So now in my IDES, i tried to uncheck that box.
When i save this setting, I get the following error.
"Fill table key for table T156Q only up to position 010".
Please help with this issue.
Regards,
PiyushTo load initial inventory in Quality stock and release it using Inspection lot UD, use movement type 563 instead of 561.
With 561 movement stock is directly posted to un-restricted status. So there is nothing to be released from Quality stock.
Maybe you are looking for
-
i have two different apple id's, one on my computer and one on my phone. i connected my phone to sync music and i lost most of my music. i realised that the music i lost is from the apple id on my mac. how do i undo this mess? help anyone?
-
Using MacBook Pro and Mac Mini
I've decided to add a Mac Mini to my house, rather than constantly running my MBP on power with a 2.5TB USB connected, serving my 3 Apple TVs. The idea will be to run the Mac Mini headless, running iTunes, with my USB drive connected, always availabl
-
Dynamic SQL Error -ORA-00904: invalid identifier
Hello! I'm really hoping I can get some fast help on this. In the interest of honesty, this is for a university oracle programming assignment. I've searched everywhere I can for the answer and haven't had any luck. Anyway, the problem in a nutshell.
-
Temporary tablespace groups - all available temp files not used
We have a temporary tablespace group TEMP_GROUP made of the following pre-existing temp files. I have placed the size in MB in brackets. Names have been changed to protect our privacy. NLS is spanish SQL> select * from dba_tablespace_groups; TEMP_GRO
-
PowerShell : SPWeb.GetFolder() with browser folder url failed
I am using powershell script and when I call SPWeb.GetFolder() with (short url) it works fine and when I used (browser url) it's not working. However it refers to the same folder e.g short url http://intranet.company.eg/it/Test/Test browser url : htt