QM : First inspection lot - inspection plan, other inspection lot another insp. plan

Hello.
Is it possible with standard SAP when it is create the first inspectio lot for material/vendor ( origin 01) that it takes an inspection plan, and for the next inspection lot that will be created for the same material/vendor ( origin 01) that system takes from another inspection plan ????
Or have i to user a badi/user-exit?? which?
Regards.
Antonio

Dear Antonio,
Try this
1. In material master do not set the auto release indicator for 01 inspection type
2. Make inspection plant for material with group counter 2
3. Now you have two different inspection plans with group counter1 &2
4. Do the GR for same material for two times
5. Two inspection lots will be generated
6. Assign inspection plan manually for first inspection lot with first group counter
7. Assign inspection plan manually for first inspection lot with second group counter
Please let me know is it working or not
Regards,
Jagan

Similar Messages

About the first inspection before mass production ,and the end inspection after mass production

Hi ,experts :
       There is a scenario about my customer : before mass production they need to do first inspection avoid a lot of defect for the finish goods ; and he also need doing the end inspection to check whether the mold can be used for next batch or need to do some repair .
     I want to add two operations in the routing ,but it seems unreasonable .
     Can anyone give me some advice for it ? thanks advance .

Hi Avril Liu,
OPTION - A
I think, you can try the below option which may not be the best solution but looks logical to me -
a) Create to inspection types 8901 (Initial Mold Manual Inspection) and 8902 (Final Mold Manual Inspection) and assign them to inspection lot origin 89. Please note these inspection types are manually created and these are not linked to stock movement.
b) Use the inspection type 8901 to test the initial condition of the process. In case if the UD = R, then use enhancement to create a new 8901 inspection lot by linking the old number in "TEXT" field.
c) If the next inspection UD = R, then repeat the manual inspection lot 8901 inspection lot creation step. If the inspection lot 8901 UD = A, then this process is Good to start he process. So create a follow-up action and send emails to stakeholders.
d) If you are not interested in testing the in-process quality of the produced materials, then you need not need 04 inspection type to be added for GR inspection. If you do test (I think yes, based on your answer...) you can add this inspection type to your material. Then you will be able to Release/Block your produced materials too using UD= A/R respectively.
e) Once the production process is complete, you can create manual inspection 8902 to test the mold characteristic. If the UD = R, then again execute the enhancement to create a new inspection lot 8902, by adding the previous inspection lot number in TEXT field, and keep repeating this process. If the UD = A, then there is no further need for testing, and follow-up mail can be send to the stakeholders for the completion of the process.
OPTION - B
Else, you may need to use inspection type 14 linked to your equipment doing the production, to test the mold characteristics. This process will be linked to PM-QM module, and you need to map this process too.
1st inspection can be linked to 89 manual inspection to double check the process and the final inspection after entire production can be done through inspection type 14. Checking the produced material quality will again need inspection type 04 activation like normal process.
Thanks,
Arijit

HT202157 is it possible to connect an Apple TV and a Roku to your tv without first disconnecting one or the other?

Is it possible to connect both an Apple TV and Roku without first disconnecting one or the other. In other words, connecting both devices to the tv simultaneously? I'm sure it depends on the number of ports, audio/tv available, and if so, do they make a splitter that would accomodate this???

Hi. Got to App Store and download the Remote app. It's an app that makes your iPad or iPhone a remote for the Apple TV! I like it especially if you need to type a lot text.

When using internet Facebook won't open first. it will open if I open open another site first like Amazon, then it will open fine.

when using internet Facebook won't open first. it will open if I open open another site first like Amazon, then it will open fine.

What version of iPhoto were you running prior to Mavericks? First boot into Revovery volume (boot with the Command + R keys held down) and repair the disk and disk permissions. Then reboot back into Mavericks.
Two hours later when the transfer was complete, rather than having a normol iPhoto Library icon (stack of pictures with a photo of a flower), the library appeared as a folder with a half done progress bar and an "x" close button in the corner.
There was a problem with copying the older iPhoto library from the backup. Delete the library and drag it once again from the backup drive to the Pictures folder. Run the upgrader again. Is this what you see when your first launch the upgrader?
OT

Can I buy final pro using a Mac in one State and then install it in other State using another Mac?

Can I buy final cut pro x , using my mac and then install it in other State using another Mac?

Yes, as long as both Macs meet the system requirements for it.
(112783)

Is there any way to refresh the zfs snapshot other than creating another on

Hi,
I want to use the zfs send / recv replication, after I create the snapshot and do send/ recv to the remote filesystem, is there any way to do send and recv from the same snapshot after making some changes to the original filesystem other than creating another snapshot every time before send / recv
Thanking you
Ushas Symon

No, you'd have to take another snapshot and then send it, but you don't need to save all the snapshots after you are done. If you script it out to take snapshots fairly often during the day, the amount of data would be small. You can also send to a file and then backup that file to tape or whatever, you wouldn't have to save a million snapshots. You can also look into OpenSolaris' Time Slider function.

In one of my iPhoto 'event' files other photos from another event seem to have doubled up over a different photo!!!!!

In one of my iPhoto 'event' files (named Thailand) other photos from another event (named Filey) seem to have doubled in the Thailand event, but when I click on the image (from filey) it shows the Thailand image!!!!!
I hope this is understandable
Thank you
Sheena

What is your iPhoto version and your MacOS X version on your MacBook Pro? It looks like the thumbnails of your photos were wrong. Make a backup copy of your iPhoto library and try to rebuild the thumbnails. in iPhoto '11 try this:
Launch iPhoto with the key combination⌥⌘ (alt/option-command) held down and select "rebuild thumbnails" from the panel.

No Sampling Procedures in In-Process Quality Inspection (origin 03, insp. points 100)

Hi
I am facing a problem while attaching master inspection characteristics etc. in a master recipe (C202). I first specify inspection points as 100 in the recipe header (quality data section) and then I go to the operations section, select a phase and go into the area where I can attach MICs, methods and procedures. Now, no matter what kind of MICs I add there ( ones that require a sampling procedure, of course, as it is my need) it does not let me browse (F4) on the mandatory sampling procedure field. I have created all kinds of sampling procedures (freely defined inspection points, without inspection points, manual valuation, spc, fixed, 100% - all combinations) but the mandatory sampling procedure field does not let me browse for sampling procedures. If I directly type a name, it says that the procedure is not suitable for inspection points (100 that I defined) despite the sampling procedure being a freely defined inspection points one or any other. This is only in the case of inspection points/in-process/master recipe. otherwise normal GR usage 5 plans are working fine. Any help? It's urgent. Thank you!
Regards,
Bilal

No, I'm using 100 inspection points, freely defined (both in my master recipe header and sampling procedure)
And yes, the sampling procedure does have the radio button selected for freely defined inspection points, manual valuation and fixed sample.
Like I said above I did get half of it working by making a setting in SPRO in the section that says Inspection for manufacturing order. In the process order section, I selected something related to production order in one of the tabs. That now enables me to assign a sampling procedure to a characteristic (SP with freely defined insp points) but it still doesn't let me browse (F4) for a sampling procedure eventhough there are 3-4 suitable procedures. I directly have to type them and press enter. Cannot F4/browse procedures.

Creation of inspection type (mm02 insp.setup) in mass

Hi All,
Is there a way of creating inspection type for all materials via mass update.
It is in the Quality management view of mm02.
Thanks
Venkat

Hi
Try to use trx MASS
Max

Why does the first page of construction plans in pdf format print correctly, while the drawings on other pages shrink?

Help! I am trying to print out construction drawings saved as a pdf to a wide format printer. The first page prints correctly, no matter what page I start on. The rest of the pages have the drawings way too small and off center. I am having to resort to printing each page separately. Why is this happening?

Hi there ashp,
Try downloading and running the print and scan doctor located here:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03275041&cc=us&dlc=en&lc=en
It can fix a lot on its own and if not give a better idea of what is going on.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Bios Update to reduce fan speed at first level for t430s planned?

As everybody here now about the hight rpm of fan at first level (ca. 3000rpm). Lenovo changed that with bios update e.g. for T430. As I notice T430s has no update reducing the speed at first fan level.
Does anyone now if lenovo plan to bring an update to reduce the speed on T430s too?
Or will be no change for that?
Thanks
Stephan

Hi schildpad00
Can you clarify more, which model exaclty you have ( S310 or U310 ) , and also do you play a games while the fan makes that noise
Please let me know
Thanks
Alaa
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

In Table ctrl, based on i/p given in first col, populate data in other cols

Hi All,
Please help me in achieving the following requirement.
In a table control, if a value is entered in the first column, all the remaining columns should be filled automatically with relevant data based on the input in the first column.
The table control is built using the wizard with the option 'from internal table from the program'.
Thanks in advance.
Kalyani

Hi Kalyani,
You can achieve the following requirement but you have to trigger a user action like ( Pressing Enter, Checking or Unchecking a Checkbox) which will again trigger the PAI Event and which will load the same. So, you can repopulate the table control with the new data according to your logic and hence can again display it.
Hope you got my point. Have a look at the demo programs which will tell you about the flow of control and which you can use to control the data. But you need an User event to achieve your requirement.
Report                                                   Description
DEMO_DYNPRO_TABCONT_LOOP          Table Control with LOOP - ENDLOOP
DEMO_DYNPRO_TABCONT_LOOP_AT    Table Control with LOOP AT ITAB
DEMO_DYNPRO_TABLE_CONTROL_1     Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2     Table Control with LOOP AT ITAB
Hope this will help.
Thanks,
Samantak.

9ias : Slow first time and fast the other times

Hi,
I'm facing a problem with using Reports 9ias on a HP-UX server ...
I start a report server on the server
I'm calling the report from forms with RUN_REPORT_OBJECT (destype=file, desformat=pdf, batch, synchronous) and then call a web.show_document.
The first time I run the report it takes a long time ...
The others times, even with different parameters, it appears immediately
I've understood the Report Server is using a cache and it takes time to load reports in it.
We have 250 reports in our application, and we would like the reports to run immediately for the end-users.
How can I put all the reports into the cache automatically in background ?
Is there a way to speed up the first call ?
Thx in advance !

iOS: Troubleshooting Messages

First page prints higher than others

I'm modifying a check RTF template for EBIS R12 that was given to me and I've been able to get everything working except for one thing - the first page of output prints one line higher than all the rest. Has anyone ever experienced this before? I'm quite new to XML design so I'm sure I've just missed something simple. Any advice would be appreciated.

Hi,
this is due to grouping or for loop function rtf if u eliminate those also u need to decrease the font size of those tags to 1

First Page prints fine, all other pages print reduced

I’ve been working with one of our users on a printing problem she is having with PDFs.
The problem is that when printing PDFs, the first page prints fine, but any subsequent pages print at a reduced scale.
If you set the print job to print only pages 2 – to end of doc, Page 2 becomes the first page printed and it prints fine (where before it didn’t when you printed pages 1 – to end of doc) but pages 3 – to end of doc print at the reduced scale.
I have tried to change her print options from Shrink OverSized Pages to each of the following:
Actual Size
Fit
Custom Scale (we’ve tried printing at 100% as well as a number of reduced options, but then all this does is make the first page smaller and smaller)
I’ve googled for help, and haven’t found anything that resolved the problem.
I checked her version of Adobe Reader and she has the same version (XI) as another user who doesn’t have this problem when she prints. I’ve checked the other user's settings to see if her printer settings were different than the user that is having problems – and they aren’t.
I’ve completely uninstalled and reinstalled Adobe Reader and this hasn’t resolved the problem either.
I've tried printing to a different printer - and it still happens.
Any thoughts?

See my answers below:
a) The size of the pages of PDF which you are printing. LETTER
b) Does all pages of the PDF are of same size? YES
c) What is the page size set in the Printer and what is the actual size of the paper which you have put in the tray? LETTER
d) Does this problem also happens on the virtual printer which you might have on your system (Try either Microsoft MPS Document writer or Adobe PDF Printer) No VIRTUAL PRINTERS
Thank you for attempting to help me with this... we have tried everything and haven't been able to resolve the problem.
Sherri

QM : First inspection lot - inspection plan, other inspection lot another insp. plan

Similar Messages

Maybe you are looking for