QM: How to Move material from quality stock to unrestricted stock

Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,

Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar

Similar Messages

How to move Content from Quality to Production Server

Hi
We are havng EP6 SP13.
How to move the Content from one Server to another
With Regard's
Sri

Hi ,
Check out this link
http://help.sap.com/saphelp_nw04/helpdata/en/91/4931eca9ef05449bfe272289d20b37/frameset.htm
This explains how to move PCD objects by creating a transport package.
Ankur
P.S. Reward points if this helps

Goods Receipt of a material in Quality aswell as Unrestricted stock

Hi All,
When receiving material against PO from different vendors ,stock from few vendors should go into Quality stock whereas receipts from other vendors should be received into Unrestricted stock.
Please suggest how to achieve this.
Regards

Hi,
Thanks for your replies but i had made the selections as per senthil's suggestions but still the Inspection lot is being created and the stock is posted into Quality.I am not sure which CTRL Key to select i have tried the underlined ones from below ..should i be selecting some other key and are there any more settings that need to be done.
0000 No active functions
0001 Vendor release (with Warning)
0002 Vendor release, tech. delivery terms
0003 Vend.release, tech.del.terms, QA agreem.
0004 Vend.rel,TechDelT.,QA agreement,certif.
0005 Vendor release, certificate
0006 Delivery release, documentation required
0007 Delivery release, invoice block
0051 Vendor release, certificate,Inv Block
0052 Vendor release, Inv Block
0053 Inv Block
0054 Vendor release, certificate, error mess
0055 Vendor release, certif, inv block, error
0056 Vendor release (with Error)
0057 Certificate,Inv Block (with Warning)
0058 PBB - VenRel/Cert + Sub Spec Mgmt
0059 PBB - VenRel/Cert + Packing/SMI
0060 certificate required
8888 Vendor block inactive
9999 All functions active with error message
Regards

Movement of Material from Quality.

Hi ALL,
The inspection lot is created with Insp. type "04" ..'Goods receipt inspection from production'...The usage decision as "DEV2" has been made for the lot...but the qty for offgrade has been posted to Quality instead of unrestricted. and new insp lot of type '08' is created..for the offgrade..
On analysis it is found "Post to insp stock " indiactor was not set...So this takes care of all future lots...But for the current lot how to move the material from Quality to Unrestricted...SAP does not allow to carry out UD for the 2nd lot.."08" .
Your help is required..
Thanks,
Regards,
Ameya K.

Hi Sriramachandra,
Thanks for the reply..Actually now two inspection lot exists...one with type"04' whose UD was done as "DEV2" devalue for scrap..and as a result system prompted to enter the Offgrade material ...
As a result new lot got created with new batch for the offgrade...Now do i have to create insp plan for the offgrade...or is there any other alternative...?
Thanks
Ameya k.

Not able to clear material from quality stock

Hi,
There is a stock inconsistency between inspection stock in materials management and inspection stocks managed in inspection lots.Due to this, unable to clear inspection stock. I tried with QA08 ,MB1B also assiging inspection type 08 but still posting not happening fron inspection stock to unrestricted stock.
Regards,
Ravi

Hi Ravi,
Please note / clarify following :
1) If in material master of QM you have activated post to inspection (no lot generation with 01 or 04 type insp) then stock will appear in quality, and you should or can only clear it using MB1B 321 movement type.
2) If already you have activated 01 or 04 or 08 then you will be allowed to post stock through inspection only (QA11).
3) Check one more important point :
From old lots somebody might have done result recording and given UD but forgot to do stock posting. you can find such lots with status 'SPRQ'. go to QA32 put particular material, remove range dates and select all insp lots. from the list apply filter to column 'system status' check for ' SPRQ ' in the filter. you will lots where UD given (green radio button) but stock posting pending.
Please elaborate if problem if not resolved.
Best Regards,
Shekhar

Moving material from quality to unrestricted

Hi Experts,
We have a scenario where the user has given the UD but the stock posting tab was missing in the QA32 screen, so stock posting could not be done. Now in the stock overview the material is available in quality stock only. We want to take the material to unrestricted stock. Inspection types 01, 08 and 09 are active in material master. Please advise how to proceed? If we try to transfer material from quality to unrestrictedthrough 321 movement in MB1B, we are getting error message "change inspection stock in QM only ". Please advise.
Regards
Sm.

Hi
08 is Stock transfer
The QM component cannot manage stock movements for inspection lots that were created manually.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
This inspection lot is created automatically during stock transfer or created manually ?
Alagesan

Problem in BAPI for stock posting from quality inspection to unrestricted usage

Hi all,
I am using BAPI_GOODSMVT_CREATE for stock posting from quality inspection to unrestricted usage Stock against quality inspection lot(not by MB1B) using mvt type 321.The material doc gets created by the BAPI,but actual stock posting is not taking place ie.the stock doesn’t get reflected in QA33/32 and QA11 also .Can any one suggest what must be wrong?The inputs given are as follows:
GOODSMVT_HEADER:
PSTNG_DATE =30/07/2014, DOC_DATE = 30/07/2014, REF_DOC_NO = INSP LOT NO.
GOODSMVT_CODE:
GM_CODE: ‘04’ .
GOODSMVT_ITEM:
MATERIAL = MATERIAL NO
PLANT = PLANTCODE
STGE_LOC = ‘WIP’
BATCH = BATCHNO
MOVE_TYPE = ‘321’
ENTRY_QNT = 100
ENTRY_UOM = ‘EA’
ORDERID = Prd ord no.
After executing this I used BAPI_TRANSACTION_COMMIT also. I am able to see the posted qty in MMBE,but it is not reflecting in QA11/33/32.
Kindly help me.

Hi Naveen,
Thanks for the reply. Even after using FM QAVE_PROCESS_AUTO_UD,when i execute
BAPI_GOODSMVT_CREATE, the same thing is happening.I am unable to see the stock deducted in QA33.
Is there any input in the goods mvt bapi where we can provide inspection lot no since i believe that the goods mvt has to get connected with the inspection lot.

Transfer of Stock from Quality Insp. to Unrestricted

Hi SAP-PP/QM Experts,
I am doing complete inspection with UD for a particular inspection lot but my stock in Quality Inspection is not transfer to Unrestricted Used stock.I also tried Movt.Type 321 thereafter the stock can't moved.Pl.suggest me the usefull solutions.Helpfull solution will be awarded.
Prashant

Dear Venkat,
There is a tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
Secondly, this is a stock item.
Thirdly, No PS module is implemented in my client
I think the user has posted the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
Pl.suggest any possible solution .
Prashant

How to post return stock to unrestricted stock for only Plant & Material Type combination?

Hello Everyone,
At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
Regards
Anwar

Dear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy.

Bapi to move Quality inspection stock to unrestricted stock

Hi All,
I am developing a report where the material batches should be distributed to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
Thanks in advance,
Pramod

Hi Peter,
The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
Thanks,
Pramod.

How to move materials from one sloc to another sloc materials are more tha

Hi,
Can any one help me on this issue How to move materials from one sloc to another sloc materials are more than 1000
and from existing sloc to new sloc which is Hum managened i need help onthis issue thanks

hi
use T-code: MB1B Transfer Posting
Movement type:
311 Transfer posting storage location to storage location in one step
The quantity is transferred from unrestricted-use stock of the issuing storage location to unrestricted use in the receiving storage location.
Possible special stock indicators: E, K, M, Q
313 Stock transfer storage location to storage location in two steps - removal from storage
The quantity is transferred from unrestricted-use stock of the issuing storage location to stock in transfer in the receiving storage location.
Possible special stock indicators: None

Pointers Needed on Movement from Blocked Stock to Unrestricted Stock !

Hi Gurus,
I have a scenario wherein I need to take care of "Movement from Blocked Stock to Unrestricted Stock using Movement type 343 and in the next step need to do Material to Material transfer using movement type 309"
My Query is:
1. What does it mean when we say Movment from Blocked stock to Unrestricted stock ?
2. What does it mean when we say Material to Material transfer ?
Please help me with pointers on finding a BAPI to do the above stock movements or material to material transfer.
Many Thanks,
Madan

Hi,
Please help me with pointers on the mapping parameters for this BAPI.
Here are the details which I am using, but gettin error message -
T ID                   NUM MESSAGE
E /CWM/MM              001 Transfer the parallel entry quantity/entry unit of measure
I have filled below fields:
GOODSMVT_HEADER
       PSTNG_DATE                   11/25/2009
       DOC_DATE                       11/25/2009
       PR_UNAME                        MyName
       HEADER_TXT                    TEST
GM
04 (Transfer Posting)
GOODSMVT_ITEM
           MATERIAL                       100001374
           PLANT                          1AAE
           STGE_LOC                       B100
           BATCH                          0111331309
           MOVE_TYPE                      343
           ENTRY_QNT                                10.000
           ENTRY_UOM                      EA
           ENTRY_UOM_ISO                  EA
           MOVE_MAT                       100001374
           MOVE_PLANT                     1AAE
           MOVE_STLOC                     B100
           MOVE_BATCH                     0111331309
Need your help to resolve this.
Many Thanks,
Madan

Report for material moved from blocked stock to unrestricted stock

Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
Pratap

It would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria.

How to move table from one tablespace to other tablespace?

how to move table from one tablespace to other tablespace?

887274 wrote:
how to move table from one tablespace to other tablespace?
alter table <table_name> move tablespace <new_tablespace_name>;
Rebuild the indexes; alter index <index_name> rebuild <new_tablespace_name> online;Example;:
SQL> create table ttt( ID NUMBER PRimary key);
Table created.
SQL> insert into ttt values (1);
1 row created.
SQL> commit;
Commit complete.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 VALID
SQL> alter table ttt move tablespace users;
Table altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 UNUSABLE
SQL> alter index SYS_C0010863 rebuild tablespace users online;
Index altered.
SQL> select index_name, status from dba_indexes where table_name='TTT';
INDEX_NAME                 STATUS
SYS_C0010863                 VALID
SQL>

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?

I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie

QM: How to Move material from quality stock to unrestricted stock

Similar Messages

Maybe you are looking for