Qm in repetative
Dear gurus,
i have maintained inspection type 13 for repetative mfg,
1) wht setting should be done in rate routing for inspection point?
2) when the inspection lot generated automatically.
pleased help me out
Regards
Pravin
Hi,
Repetitive Mfg : In process inspection procedure steps:
1. Material master> QM view> maintain Inspection type 13.
2. Create Rate Routing for the material, maintain the Operation and control key for Inprocess Inspection, assign the Master inspection Charateristics.
3.Do all the Planning and Execution of planned orders for the material.
4. Goto MFPR T code, enter the fields: material and Plant and Prod Ver. if you have.
Excecute inspection lot for material will be visible and release the Inspection lot for the material.
5. Goto QE51N Tcode and input the material and plant and execute, you will find the Inspection lot, input the results.
Hope this is clear.
Navin.
Similar Messages
-
I can go into Firefox without any trouble but when I enter my Textpattern Web to work on and change, the log in appears, I open it but as soon as I start to work it goes back to log in and the following message comes out
“Para mostrar esta página, Firefox necesita enviar información que repetirá cualquier acción (como una búsqueda o una confirmación de compra) realizada anteriormente. “reenviar or cancelar)”
I click on to “reenviar” and nothing happens. How do I solution this problem? My web has been working for two years without any trouble; I am creating a ceramic dictionary in three languages in with illustration. My web is www,ceramicsbensu.es
== This happened ==
Every time Firefox opened
== Sunday 18th july 2010 -
*Hi friends,*
*Here i am using ext no range for batch managment.but here i don't want same no should be repeat for any next batch.*
*For ex-: 999 batch no is used for 1 one material while movements, that should not be used in any future batch. system shows some error in case of repetation of used no.*
Regards
AmitHi Amit
You have to use the user exit to achieve this.
The following are the 2 user exits available, use the suitable one for your requirement.
In the function module exit EXIT_SAPLV01Z_003, an external number range XY is determined, against which the batch numbers are checked.
In the function module exit EXIT_SAPLV01Z_004, the batch number entered is checked against your own rules.
Regards
Bala -
Hello,
Any one used row repeter UI element. how do we use this in our application.
I have one case can we use it in this.
I need to add my input feilds in runtime.
means I have a input feild on my screen and a add button when I press add button,
I should be able to get another input feild in next line and i should be able to input values,
This should happen n times depending on requirement.
Thanks & Regards,
Ajayhi ajay.........
in that case you need to go for dynamic programming..
you have the class cl_wd_input_field which as a method new_input_field which adds an input field....
make sure that you cahnge the name of it every time you add.... initially try with only 1 input field.... you can get an idea of it when you work.
---regards,
alex b justin -
hI
i have made one PLD.
Two repetative area, one for parameter listing , one for query data , are used in that pld.
When i tried to add one more Repetative area, i have seen that Add icons or menuprompt for Repetative area , is deactive.
So i cann;'t add repetative area in PLD.
Please help me
on this matter.
KunalHi Dhanalakshmi
Thanks
i had worked on QUERY PLD.
Yes, we cann't add more then existing two default repetative area
So for summary report, i will have to make new another QPLD with Same Query.
This is Greatest Limitation of QPLD.
Thanks for valuable information.
Regds
Kishore -
PLD Freight in Repetative Area
Hi Experts,
I have 20 items in A/R Invoice, and have 1 Freight amount say at 1500/-
I am trying to give detail in the A/R Invoice PLD, for this I added one more Repetative Area, but the Freigt details are appearing 21 times (as many times the number of items there are in the invoice).
How can I make the detail appear only once in the another repetative area.
Is there any way to group the freight field, and prevent it from appearing more than 1 number of times
Regards,
Murtaza R.E.Hi,
Could you please try out the following:
1. Create UDFs on Marketing Document header level - number of UDF
depending on the max number of Additional Expenses from the OEXD
2. Use query like below for UDF1:
SELECT T2.EXPNSNAME + ' ' + STR(T1.LINETOTAL) + ' ' +
STR(T1.VATSUM) + ' ' + STR(T1.VATPRCNT)
+ ' ' + STR(T1.LINEVAT)
FROM OINV T0
INNER JOIN INV3 T1
ON T0.DOCENTRY = T1.DOCENTRY
INNER JOIN OEXD T2
ON T1.EXPNSCODE = T2.EXPNSCODE
WHERE T0.DOCNUM = $[OINV.DocNum]
AND T1.LINENUM = 0
Use query like below for UDF2:
SELECT T2.EXPNSNAME + ' ' + STR(T1.LINETOTAL) + ' ' +
STR(T1.VATSUM) + ' ' + STR(T1.VATPRCNT)
+ ' ' + STR(T1.LINEVAT)
FROM OINV T0
INNER JOIN INV3 T1
ON T0.DOCENTRY = T1.DOCENTRY
INNER JOIN OEXD T2
ON T1.EXPNSCODE = T2.EXPNSCODE
WHERE T0.DOCNUM = $[OINV.DocNum]
AND T1.LINENUM = 1
and so on.
3. Add the UDF to the Layout.
NOTE: The line number is important as there can be more than
one additional expense for the same Document Number;
Note that the query draws the details of one single record per
from the Add Expenses Table. You can make the amendments in the
query as required by either removing or adding more fields;
like increase space between the fields etc
Hope this will help.
Regards,
Gagan Thareja
SAP Business One Forums Team -
Very urgent please ----repetting values in the output
I am getting values for acc seq access seq number and codndition table repeting values as in the output of the report, please have a look in my code and please do respond immediatley.
regards always, below is my code and output
REPORT zmaster_condition LINE-COUNT 80 LINE-SIZE 225.
D A T A *
INCLUDE zmaster_condition_top.
S E L E C T I O N S *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
SELECT-OPTIONS: s_kvewe FOR t683s-kvewe,
s_kappl FOR t683s-kappl,
s_kalsm FOR t683s-kalsm,
s_kschl FOR t683s-kschl,
s_kabnr FOR t682i-kotabnr,
s_kozgf FOR t682i-kozgf.
SELECTION-SCREEN END OF BLOCK b01.
*SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s04.
*PARAMETERS: p_vari LIKE disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b4.
**SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
*SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS R1 RADIOBUTTON GROUP RADI1 DEFAULT 'X'.
*SELECTION-SCREEN END OF BLOCK b02.
A T S E L E C T I O N - S C R E E N *
M A I N P R O G R A M *
START-OF-SELECTION.
*Initializing the local tables.
CLEAR:it_t682i,it_t683s,it_t685.
REFRESH:it_t682i,it_t683s,it_t685.
clear it_output_report.
refresh it_output_report.
*Selection of data from pricing procedure tables
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
INTO TABLE it_t682i
WHERE kvewe = 'B'
AND kappl = 'V1'.
SELECT kvewe kappl kalsm stunr zaehk kschl FROM t683s
INTO TABLE it_t683s
WHERE kvewe = 'B'
AND kappl = 'V1'
and kschl in s_kschl
AND kalsm IN s_kalsm.
sort it_t683s by kvewe kappl.
DELETE adjacent duplicates FROM
it_t683s .
SELECT kvewe kappl kschl kozgf FROM t685
INTO TABLE it_t685
WHERE kvewe = 'B'
AND kappl = 'V1'
AND kschl IN s_kschl
AND kozgf IN s_kozgf.
LOOP AT it_t683s.
it_output_report-kvewe = it_t683s-kvewe.
it_output_report-kappl = it_t683s-kappl.
it_output_report-kalsm = it_t683s-kalsm.
it_output_report-stunr = it_t683s-stunr.
it_output_report-zaehk = it_t683s-zaehk.
it_output_report-kschl = it_t683s-kschl.
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
INTO TABLE it_t682i
WHERE kvewe = it_t683s-kvewe
AND kappl = it_t683s-kappl
and kozgf in s_kozgf
and kotabnr in s_kabnr.
clear it_t682i.
loop at it_t682i.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kolnr = it_t682i-kolnr.
it_output_report-kotabnr = it_t682i-kotabnr.
APPEND it_output_report.
CLEAR it_output_report.
endloop.
APPEND it_output_report.
ENDLOOP.
E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Output to a list
FORMAT COLOR 2 .
WRITE:/2 'Usage',09 'App',17 'Proced',24 'Step',
37 'Counter',50 'CondType',63 'Description',85 'AccSeq',
97 'AccSeqNum',108 'ConTable'.
WRITE:/1(225) sy-uline.
LOOP AT it_output_report.
WRITE:/ it_output_report-kvewe UNDER 'Usage',
it_output_report-kappl UNDER 'App',
it_output_report-kalsm UNDER 'Procedure',
it_output_report-stunr UNDER 'Step',
it_output_report-zaehk UNDER 'Counter',
it_output_report-kschl UNDER 'CondType',
it_output_report- UNDER 'Description',
it_output_report-kozgf UNDER 'AccSeq',
it_output_report-kolnr UNDER 'AccSeqNum',
it_output_report-kotabnr UNDER 'ConTable'.
it_output_report- UNDER 'SalesOrg',
it_output_report- UNDER 'DocType'.
it_output_report- UNDER 'Customer'.
ENDLOOP.
output of the report:
Usage App Proced Step Counter CondType AccSeq AccqNum ConTable
B V1 V10000 220 00 ZCR1 Z200 05 511
B V1 V10000 220 01 ZRAS Z200 05 511
B V1 V10000 225 00 ZTPT Z200 05 511
B V1 V10000 230 00 ZOP4 Z200 05 511
B V1 V10001 010 01 RD03 Z200 05 511
B V1 V10002 010 00 ZREP Z200 05 511
B V1 V10000 200 00 ZOP3 z200 05 511
B V1 V10000 130 00 ZOC3 z200 05 511i would like to thanks you for your valuable help.
i am still getting repeated values for access seq , access number and cond table,last three columns in the output, pls see as it it is very urgent...
here is the code:
REPORT zmaster_condition LINE-COUNT 80 LINE-SIZE 225.
D A T A *
INCLUDE zmaster_condition_top.
S E L E C T I O N S *
SELECTION-SCREEN BEGIN OF BLOCK b01 WITH FRAME TITLE text-b01.
SELECT-OPTIONS: s_kvewe FOR t683s-kvewe,
s_kappl FOR t683s-kappl,
s_kalsm FOR t683s-kalsm,
s_kschl FOR t683s-kschl,
s_kabnr FOR t682i-kotabnr.
s_kozgf FOR t682i-kozgf.
SELECTION-SCREEN END OF BLOCK b01.
*SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-s04.
*PARAMETERS: p_vari LIKE disvariant-variant.
*SELECTION-SCREEN END OF BLOCK b4.
**SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
*SELECTION-SCREEN BEGIN OF BLOCK b02 WITH FRAME TITLE text-b02.
PARAMETERS R1 RADIOBUTTON GROUP RADI1 DEFAULT 'X'.
*SELECTION-SCREEN END OF BLOCK b02.
A T S E L E C T I O N - S C R E E N *
M A I N P R O G R A M *
START-OF-SELECTION.
*Initializing the local tables.
CLEAR:it_t682i,it_t683s,it_t685.
REFRESH:it_t682i,it_t683s,it_t685.
REFRESH it_output_report.
SELECT kvewe kappl kalsm stunr zaehk kschl FROM t683s
INTO TABLE it_t683s
WHERE kvewe IN s_kvewe
AND kappl IN s_kappl
AND kalsm IN s_kalsm
AND kschl IN s_kschl.
*delete adjacent duplicates from it_t683s comparing
kvewe kappl kschl.
SELECT kvewe kappl kozgf kolnr kotabnr FROM t682i
INTO TABLE it_t682i
FOR ALL ENTRIES IN it_t683s
WHERE kvewe = it_t683s-kvewe
AND kappl = it_t683s-kappl
AND kozgf IN s_kozgf
AND kotabnr IN s_kabnr.
LOOP AT it_t683s.
it_output_report-kvewe = it_t683s-kvewe.
it_output_report-kappl = it_t683s-kappl.
it_output_report-kalsm = it_t683s-kalsm.
it_output_report-stunr = it_t683s-stunr.
it_output_report-zaehk = it_t683s-zaehk.
it_output_report-kschl = it_t683s-kschl.
move-corresponding it_t683s to it_output_report.
sort it_t683s.
sort it_t682i.
READ TABLE it_T682i with KEY KVEWE = it_T683s-KVEWE
kappl = it_t683s-kappl.
LOOP AT it_T682i WHERE KVEWE = it_T683s-KVEWE
AND kappl = it_t683s-kappl.
AND kotabnr IN s_kabnr.
IF SY-SUBRC EQ 0.
move-corresponding it_T682i to it_output_report.
it_output_report-kozgf = it_t682i-kozgf.
it_output_report-kolnr = it_t682i-kolnr.
it_output_report-kotabnr = it_t682i-kotabnr.
ENDIF.
APPEND it_output_report.
ENDLOOP.
*DATA TAB(4).
*DATA VKORG LIKE TAB-VKORG.
*CONCATENATE it_t683s-kvewe it_t682i-kotabnr INTO TAB .
*SELECT SINGLE VKORG INTO VKORG FROM TAB WHERE
KSCHL = 'ZRC1'.
E N D - O F - S E L E C T I O N
END-OF-SELECTION.
*Output to a list
FORMAT COLOR 2 .
WRITE:/2 'Usage',09 'App',15 'Proced',24 'Step',
37 'Counter',50 'CondType',63 'Description',85 'AccSeq',
97 'AccSeqNum',108 'ConTable'.
WRITE:/1(225) sy-uline.
LOOP AT it_output_report.
WRITE:/ it_output_report-kvewe UNDER 'Usage',
it_output_report-kappl UNDER 'App',
it_output_report-kalsm UNDER 'Proced',
it_output_report-stunr UNDER 'Step',
it_output_report-zaehk UNDER 'Counter',
it_output_report-kschl UNDER 'CondType',
it_output_report- UNDER 'Description',
it_output_report-kozgf UNDER 'AccSeq',
it_output_report-kolnr UNDER 'AccSeqNum',
it_output_report-kotabnr UNDER 'ConTable'.
it_output_report- UNDER 'SalesOrg',
it_output_report- UNDER 'DocType'.
it_output_report- UNDER 'Customer'.
here is the output:
Report to list out all Condition Records for Output and Pricing.
Usage App Proced Step Counter CondType AccSeq AccSeqNum ConTable
B V1 V05000 010 01 AF00 Z001 05 551
B V1 V05000 020 02 MAIL Z001 05 551
B V1 V05000 030 01 ESYM Z001 05 551
B V1 V06000 010 01 AN00 Z001 05 551
B V1 V06000 020 02 MAIL Z001 05 551 -
Display the Repetative area in Incoming and Outgoing payments
Hi Experts,
Can any one help me how to Display the Repetative area Header,Repetative area and Repetative area Footer in the
Incoming and Outgoing payments....
Urgent .... Pls...
KarthiHi Sumpath,
Then how can i get printout for posted Incoming payments with Row Level data.
Per day 10 Numbers of Payments are made, For that i need to take printout daily with row details...
By default SAP Print out also not executing row level datas, i dont why or any other procedure to enable row level datas..
karthi -
Sir,
While carring out repetative manufacturing scenario what are the details to be mentioned in production version in mrp4 in planning data like detaile ,rate,rough cut planning once maitained it shows an warnig like the date doesnot math with alternate bom,detailed plannig ,rate planning,rough cut plannig. the company does have repetative manufacturing scenario, how to rectify the error ,kindly help
ThanksDear Sadanand,
1.Assign the REM profile in the MRP4 view of the material master and REM allowed indicator.
2.Assign the created rate routing and BOM inthe production version and also REM allowed indicator
inside the production version.
3.Rate routing can be created using CA21.
4.Assign the rate routing against detailed planning if you have assigned the routing selection id against
detailed planning in OPU5.Ensure your routing selection id is having the first priority to the rate routing.
5.Production versions can be created and modified using C223 or else using MM02 in MRP4 view.
Check and revert back.
Regards
Mangalraj.S -
I repet : I am not allowed to write another directory than C:\\ when I direct Firefox fon installing.
I want to post Firefox in G:\\, where I have enought space. In C:\\ I just have space for Windows .Please stick with your original thread. Locking this one as a duplicate.
https://support.mozilla.com/en-US/questions/754307 -
Hi, I have tried repetedly to install flash player on my mac mini with no luck..... help please !
How to perform a "clean install" of Flash Player in Mac OS X
-
How i get number of record in repet frame?
Hi,
How i get number of record in repet frame?
Regards
JomarJomar,
you can use Summary Columns in the Data Modell. Create them on group higher that your wished group (so on the pane for an first group of a query), use as Source the primary column and as reset at the group, where the summary column is located.
If you hide some instances via format triggers, that you could use a counter inside the format triggers to count the rows.
Regards
Rainer -
Getting error with Accordion,Repeter controls.
Hi All,
I developed an application using Accordion,repeater controls.In my application i need to get the data from xml and dsiplay that data in accordion header.I developed below code to display the header data in accordion but i am getting an error i.e. "Repeter id is not allowed on the root tag of a component".Please suggest the solution..
code:
<mx:HTTPService id="myRep" url="sample.xml" resultFormat="e4x" />
<mx:Accordion>
<mx:headerRenderer>
<mx:Component>
<mx:Repeater id="myRep" dataProvider="{myRep.lastResult.number}" >
<mx:Canvas x="64.5" y="132" width="333" >
<mx:Image source="@Embed(source='Imagestest.png')" id="img1" width="20" height="17" x="10" y="10"/>
<mx:Label text="{myRep.currentItem.ssid}" id="lbl" fontSize="14" color="#483F3F" x="29" y="10" width="166"/>
<mx:Label text="label2" width="313.5" color="#483F3F" x="6.5" y="41"/>
</mx:Canvas>
</mx:Repeater>
</mx:Component>
</mx:headerRenderer>
<mx:Label text="sample" />
</mx:Accordion>
Thanking you..You need some container between Component and Repeater, like this:
<mx:Component>
<mx:VBox>
<mx:Repeater id="myRep" dataProvider="{myRep.lastResult.number}" >
..... etc ......
</mx:Repeater>
</mx:VBox>
</mx:Component>
If this post answers your question or helps, please mark it as such. -
Setting for colored bar under clips used repetedly
Is there a setting that places a colored bar underneath clips that are used repetedly, but not in the same order? I know this setting exists in FCPro, but cannot seem to find it in FCE.
If you mean Labels then no, this is not an
FCE feature.
Al -
hi expert
how can i configure capacity planning in repetative manufacturingDear Manish,
Repetitive manufacturing uses capacity leveling to carry out capacity planning for production lines. You use the planning table
in repetitive manufacturing to carry out capacity planning and capacity leveling.
The planning table is laid out in periods and gives you an overview of dates and quantities for materials and production lines.
Check this link to explore more,
http://help.sap.com/saphelperp60_sp/helpdata/en/4c/e7f3340cdb8c44e10000009b38f844/frameset.htm_
Regards
Mangalraj.S
Maybe you are looking for
-
MessageRadioButton Value is not getting saved
Hi All, I am facing an issue with Radio Button data. When the page loads all the "No" buttons will be selected by default.When I select "Yes" radio buttton and click on "Save", all the radio buttons will get reset to "No" and same value will get pass
-
NetBeans IDE 6.0 Installation
Hi all, I am a newbie to Java Server Faces. Just tried to install netbeans 6 IDE. And it didnot work. I am getting an exception relating the navigator. What are the main things to keep in mind for Netbeans Installation. Thanks for help.
-
Ipad not showing some jpeg files
My i pad is not showing some of jpeg files received on mail as attachment, these are being displayed completely blacked out , i have also tried saving them on ipad and then tried opening them with other apps also but same result !!!!??? However the
-
Uiadump32.exe has stopped working
My HP DV3 running Vista Home Premium got hack by trojan. I decided to reinstall the system using recovery disk. Everything went smooth until at the end when install the software, I got the error "uiadump32.exe has stopped working". After 3 time retry
-
Documentation for Report Designer
Does anyone have any good links to any documentation on Report Designer? I am looking for something more than what can be found at: http://help.sap.com/saphelp_nw2004s/helpdata/en/43/8af9fecf797107e10000000a1553f7/frameset.htm Any help would be grea