QM - Inspection lot release without inspection characteristic
Hi experts, have initially created an inspection plan without inspection characteristics and a few lots have been Goods Receipt and inspection lot created. However due to no sample size is being defined at the inspection characteristics level, system is currently expecting:
Insp lot quantity: 5
Actual quantity: 5
Sample size: 0
Now that the inspection characteristics had been added into the inspection plan. Is there anyway to update the inspection lot to reflect the latest change and allow processing? Or do you have any better recommendation besides reversing GR?
Hello
please do the following
1) Go to QA02, input the lot number
2) Menu > INspection lot > Reset Sample
3) Enter & Save
4) QA02
5) Inspection specification > Assign task list by click on Task/ specification
6) Go to Sample, do the SAmple calculation
7) Save
Regards
Gajesh
Similar Messages
-
How to create inspection lot manually without using QA01 Transaction code?
Hi,
Please anybody give procedure for creating Inspection Lot Manually without using Transaction Code QA01Hello, Srinivas,
If you want another T code only then you can try QA01A.
or you can create a Physical Sample with QPR1 and then click on the button there to create inspection lot. To create inspection lot for that Physical sample (you will able to see that button only after releasing the sample) Or you can use QPR5.
But let me know the reason why you want T code other than QA01.
Regards,
Shyamal -
Inspection Characteristic is not being displayed in the inspection lot
I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
PraneetI have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply -
Inspection lot release problem
hi guys,
i have facing acute problem during inspection lot release,
<b>errors area as listed below</b>
<b>inspection lot status CRTD, CHCR,SPRQ</b>
1. characteristics result cannot be recorded for inspection lot 1000000...
2.no task list was assigned to the inspection lot,
plz help me out its very urgent,
thanks in advance
mohan.mHi
It seems there is inspection plan created for this material. You can create inspection in QP01 transaction and maintain usage 5 (Goods Receipt) and status 4 (released) in the header inspection plan.
Once plan is created, go to QA02 (Change inspection plan) and enter inspection lot. Click on inspection specification tab, change key date to current date and click on task list/spec. button, Then plan will get assign to inspection lot. Save the inspection lot. Once again if you go to QA03 (Inspection lot display), you can find system status is chnged tp CRTD to REL.
Then you can able to enter results recording and usage decision for the lot.
let me know if you need any further help.
regards
Srinivas -
RE: Behaviour of an inspection characteristic.
Hi All,
Please help me in this issue.
The requirement is the behaviour of the inspection characteristic to be different in different material lots. Take for instance:
X- Inspection characteristic.
Now this inspection characteristic is being used in two different material lots say: TO2707 & TO2909. Now the requirement is that these inspections characteristic 'X' to behave in different manner to both of the material lots. Now as this inspection characteristic is being referenced in the inspection plan for the two materials it is not possible to behave like this.
So,
This is my client requirment which I think is not really possible. what do you think.
Regards,
vivek sharmaHi Vivek,
Inspection points are the feature that guides the system "What to Do?" I mean hoe the result recording to be done with,
Either against Physical Sample or Freely defined inspection points or the RR\inspection is being done based on some event or Time etc.
Pls read the "F1" help for that field. that will make your concept more clear.
But the easier way to get-read off it is,
Check what is the value you have feed in as inspection point at Inspection plan header level, it must be 100 - reely-defined inspection point, That is why it is asking for inspection points.
So just provide some text or number (Logical Off course), there in Result Recording, that represents the RR or Inspection is done on what basis.
E.g. Inprocess-01, Recurring-May'08, etc.
Then you will able to see the Characteristic, and even then after you can't see it check the Indicator "Record Measured Values"
Regards,
Shyamal -
Method to find inspection characteristic number
want to get the inspection lot with the average min max of the inspection characteristic.... is there any method for it
SELECT QAMRMERKNR QALSMATNR AVG( QAMRMITTELWERT ) AS AVG MAX( QAMRMITTELWERT ) MIN( QAMR~MITTELWERT )
SUM( QAMR~MITTELWERT ) COUNT( * )
INTO (QAMR-MERKNR, QALS-MATNR, JQAMR-AVG1, JQAMR-MAX1, JQAMR-MIN1, JQAMR-SUM, JQAMR-COUNT )
FROM ( QAMR INNER JOIN QALS
ON QAMRPRUEFLOS = QALSPRUEFLOS
INNER JOIN QAMV
ON QAMRPRUEFLOS = QAMVPRUEFLOS
AND QAMRVORGLFNR = QAMVVORGLFNR
WHERE QALS~WERK IN S_WERKS AND
QALS~MATNR IN S_MATNR AND
QALS~CHARG IN S_CHARG
GROUP BY QALSMATNR QAMRMERKNR.
WRITE: /10(20) JQAMR-AVG1,
30(20) JQAMR-MAX1,
50(20) JQAMR-MIN1,
70(20) JQAMR-SUM,
90(20) JQAMR-COUNT.the problem is if i take the column QALS-CHARG & QAMR-PRUEFLOS in the select condition then i have to take both of them in the group by clause and then i dont get the output as i require... i want to have minimum , maximum, average of all inspection characteristics,,, along with the lot number nd batch number of a material..
if any of the guru have a report on quality then do send it -
Record results per Product, not per inspection characteristic
Dear,
Is is possible, in transaction QE51N to record results per product (or serial number) rather than per characteristic?
Today, I can only see a result recording per characteristic. For example: for inspection characteristic 1, I enter all the results for each product, then I go to inspection characteristic 2, etc. I would like to enter my results per products, i.e. for product 1: enter results for inspection characteristic 1, 2, ..., and then do the same for product 2, etc.
Is that possible?
Regards,NehSAP wrote:
What are the parameters you entering to execute QE51N? I believe you are ececuting this transaction for chara not inspection lot or material. Make sure you are not entering MIC in intial screen throgh variant.
>
> If you execute QE51N for particular one lot then you can see all assigned MIC to that lot in transaction output & you can record them one by one.
>
That is what I do. I execute the transaction for one particular inspection lot. However, when I enter into the record results screen for this particular inspection lot, I first have to "enter" into one of the master inspection characteristic, and then start recording per product (or serial number). What I would like to have is to "enter" into one product (or serial number), and for this particular product, enter all the master inspection characteristics I have previously defined.
If you still don't see what I mean, can you give me your e-mail so that I can attach an image
Oh yes, and by the way, is it possible to execute the transaction qe51n based on the criteria "production order" instead of on the criteria "inspection lot" or "plant" or whatever. I know that you change it in the layout, but I really can't find the production order on the "hidden fields"
Regards,
Edited by: MrFitch on Nov 8, 2011 9:11 AM -
Activating Subscript For Inspection characteristic Long Text in T-code QE11
Hello All
I have maintained the inspection characteristic long text in QP01 as " H2O" where 2 is in Subscript.
No when I see the inspection characteristic long text in T-Code (QE11, QE12 & QE13) it appear as (H2O) & here "2" is not shown in the subscript.
So please tell how can we activate subscript for T-Codes (QE11,QE12 & QE13) so that it is displayed correctly.
Regards
Rahul BhardwajHello All
can anyone please help me out on this. I am there must be a solution for the same. -
QM - Inspection Characteristic Upload
Hi All,
I am uploading Inspection Characteristic data through
'BAPI_INSPECTIONPLAN_CREATE' but facing error message ' In the function module interface, you can specify only fields of a specific type and length under "MATERIALTASKALLOCATION".
fields of a specific type and length under Although the currently specified field
" " is the correct type, its length is incorrect.
Please suggest me.
With regards,
PravinFor distribution of QM data SAP uses 'normally' ALE. Have a look at
http://help.sap.com/saphelp_erp2004/helpdata/en/aa/c62537b1d2360ae10000009b38f889/frameset.htm
There are topics for inspection methods and inspection characteristics - looks like best solution to synchronize several systems (manual / BAPI creation in DEV-system, testing/checking, sending to all other systems). -
Related to Inspection Characteristic load issue
Hi All,
I am trying to load inspection charatceristics - please see my requirement below
Can we use the standard SAP program for Equipment Task lists to load the Inspection Characteristics associated with the Operations?
Transaction (IA01)
The program works fine for Header and Operations (One to Many, PLKO to PLPO) but does not have a separate structure for PLMK (Inspection Characteristics) but has a structure IBIPBDCD to use.
What we're trying to achieve basically is One Header, Many Operations each having many Inspection Characteristics
Also,
In the current state the program can add one Inspection Characteristic to the First operation, is it possible to add "BDC Commands" to the file in such a way to
1. "Position on particular" operation (i.e. Position Cursor and select line on screen SAPLCPDI 3400 where PLPOD-VORNR = 'xxxx')?
2. Go back to the operations screen (i.e. SAPLCPDI 3400) at the end of each Inspection Characteristic entry in order to be able to position on either the same operation to add an Inspection characteristic or to position on a different operation (not necessarily the next one)
Could you please help me with this issue?It is possible, Get help from ABAP.
Thanks & Rgards
Rajendran -
How can copy master inspection characteristic from plant1 to plant2
Now I have 2 plants
I already created all master inspection characteristic that i need by QS21 for plant1
Is there any way I can copy all master inspection characteristic from plant1 to plant2 ?i'm creating inspection plan( QP01 ) for material , but all the materials & plans are in plant 2 (ss03)
now i have to assign MIC to inspection plan , i only can select MIC of plant 1 ,and plant text would show"plant 1" ....
so i want to create the same MIS for plant 2 , is there any way i can mass copy MIC from plant 1 to plant 2 ? -
Screen Exit QS21(Create Inspection characteristic master)
Hi All,
Does anybody know some screen exit in QS21 T-CODE? I need to add some z fields at QPMK(Inspection characteristic master) table and I need to reflex those fields in QS21 t-code. Any suggestion?
Thanks in advance.
Regards...Dear,
Follow these steps,
Go to Transaction SFAW: module pool SAPMQSDA, screen group QUAN, function 'Modified fields', 'Change'
On the following dialog box, enter the field QPMK.
Choose 'Enter'.
Place the cursor on the field QMKST-TOLERUNTEN and choose "Copy reference".
Choose 'Enter'.
Choose 'Generate screens'.
Transaction SFAW: module pool SAPMQSDA, screen group QUAN, function 'Modified fields', 'Change'
On the following dialog box, enter the field say QPMK-TOLERWBIS.
Choose 'Enter'.
Place the cursor on the field QMKST-TOLEROBEN and choose "Copy reference".
And add filed wat you want.
Save your chhanges.
Regards,
R.Brahmankar -
PR Release without classification
Hi ,
In case of a PR release without classification are following things possible
1] Like in PR Release with classification , we can maintain Currency as a characteristics & then system calculates rate equivalent to base currency maintained in value characteristics.Hence can I handle multiple currencies scenario with PR Release without Classification?
2] Release a PR at Header Level
Please answer,
Thanks & regards ,
PrasadHi Mohammed ,
How this will happen?
That means system automatically converts it or what .?
Can you pls. explain in detail , if possible.
'Ours is a free text based procurement scenarios , no material master >
Thanks & regards ,
Prasad -
hello good afternoon I have a 3g iphone in mexico activodo with baseband 05.16.05 and my brother would be released without my permission I know I can do split that q is again a function
No idea what you are asking.
-
Recurring inspection lot status "created" changed automatically to "Release" without change history
Dear Experts,
I observed that for few materials recurring inspection lot (inspection lot origin 09) status from "CRTD CHCR SPRQ" to "REL CALC SPRQ PRSI" changed automatically without manual interruption.
I have thoroughly checked the change documents in status management, but the there is change history found.
can anyone help me understand the root cause of the issue?
Regards,
A.SureshHi
Pls check this link
QM - Recurring Inspection (type 09)
Inspection type 09 process
Note : System status CRTD because there is no Insp.plan master data for particular material
Check & create Inspection plan for material & also check the Material master QM view Insp.set up tab.
Suppose if already created Insp.plan for material,then you need to assign Insp.plan manually in QA32 select the insp.lot line & click change Insp.lot icon in Header ,click spec.& save
Then system status change from CRTD to REL.
Thanks in advance
Maybe you are looking for
-
Fetching into a double from pro*c program
Hi, I want to fetch data from number column (value is 100400000664137.68) into double host variable in a pro*c program. When i fetch and print, the value is getting rounded as 100400000664138.000000. I dont want this rounding off to happen as i have
-
Hi, every time I try opening a .jp2 file, I see only a semi-transparent grey layer. How do I fix this? I'm running CS5.5 on 10.6.8 the video card is a 6970M with 2 GB and the system has 16 GB RAM.
-
Error 4310 Windows 8 Cannot burn playlist too cd.
I have Windows 8, i just downloaded itunes 2 days ago, i checked for update there was none, i slowed the download speed to 1x, still did not work, used a different cd, still did not work. ANY help at all? Laptop stats, Intel i7 duel core proccessor,
-
What is the Account and Contact workflow or best practice?
I'm just learning the use of the web services. I have written something to upload my customers into accounts using the web services. I need to now include a contact for each account. I'm trying to understand the workflow. It looks like I need to firs
-
Hi all, Please tell me the proceduce to bring back the database from failed patch? ( from 10.2.0.1.0 to 10.2.0.3.0). Thanks...