QM Inspection Type for SD Delivery in Returned Goods

hi experts,
Any ideas on how to do stock postings in Iinspection Lots that are automatically created upon return delivery
I want to post to inspection stock once the Delivery has been completed. The standard SAP automatic Inspection Lot that is created does not allow us to post to stock. pl. help
thanks in advance.
vinay

Hi Vinay,
Follow the below Customer Return procedure.
Case1.
The 06 - Inspection type is not stock relevant and also it is not possible to change bcz it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Mvt type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with mvt type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspectoin type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
follow this path.
tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data,check which movement type is assigned here.
I think in your case it will be 651.
change it to 655 and try now.
hope it will work.
revert further clarification
Regards,
S.Babusingh

Similar Messages

Inspection type for customer return of returnable package material

Hi Guys,
I send the returnable package to the customer , while reciving that material to my stock (when the customer return to me ) i want to create outbound delivery with out order refference .
I want system to create inspection lot after doing PGR of the outbound delivery .
The inspection lot sould have the option of result recording and stock posting when i do usage decission
This requirement not met by inspection type 06 , i want to create new inspection type to met above mentioned all requirement .
please provide the steps to be performed to met the same.
Thanks and regards
Thamizhchelvan G

Hi,
The 06 - Inspection type is not stock relevant and also it is not possible to change because it is SAP std.
1. If you want inspection for Customer with stock, active 05 - Inspection type in Material Master, and move the stock from customer return to QI by using MB1B with Movement type 457 Stock transfer returns to QI. After that system will create the Inspection lot in 05 Inspection type.
2. If don't want stock for inspection and directly post to Unrestricted using MB1B with movement type 453 Transfer posting to returns from customer to Unrest.
3. Customer return to Blocked stock using MB1B with mvt type 459 Stock transfer returns to blocked
Case2.
Inspection type 05 is a stock relevant inspection type.
To use 05 you must assign the 05 inspection type to the delivery item in configuration.
Follow this path.
Tcode vov6 - there will be schedule line category DN.
go to details of DN.In Business data, check which movement type is assigned here.
I think in your case it will be 651.
Change it to 655 and try now.
hope it will work.
Thanks
Vinay

Quality Mgt - can I create a new inspection type for source inspection

I want to create a new inspection type for surce inspection and I will assign it to Miscellaneous insp lot origin.
What is the application of vendor inspection lot origin ? Can be used for source inspection ?

HI,
For source inspection.
If existing insp types are not going to solve your purpose , you can create insp type & assign it to insp lot origin 01.
But before that , check whether you can use the existing insp type 01 / 0130.
You need to assign that inspection type in the Q-info record , in the source insp field of insp control.
Also go through the help tips provide by SAP
Inspection Type for Insp. Lot Origin (Source Inspection)
    Inspection type for the source inspection
Use
    If you enter an inspection type for inspection lot origin 01 in this field, you can create an inspection lot for the source inspection within the lead time before the (scheduled) delivery date.
Dependencies
    The inspection type must be active in the inspection setup (Quality Management view) of the material master.
    If a status profile is stored in the quality info record for the supply relationship, a goods receipt inspection takes place instead of a source inspection.
Regards
K.M.Arun

Configure another Inspection Type for Production Order

Hi QM Gurus,
I have one scenario, my client wants to have another inspection type for inspection lot origin goods receipt from production because they have this requirement that for some materials they need to have a status profile that will be active for inspection type standard 04. And there are also some materials from goods receipt from production that does not need status profile. Since the only thing that we could assign as specific status profile is to its inspection type. Hence, i need to create another inspection type for lot origin goods receipt from production aside from inspection type 04 that will create automatic inspection lots with different status profiles.I try this in configuration but no inspection lots has been made for new inspection type assigned to LOt origin 04 and also assigned in the material master inspection set-up. How will i do this???
Thanks.
Regards,
Matildo, Edsel
QM Consultant

Hello Edsel,
you can configure for example an inspection type 0401 and activate this inspection type for the inspection origin 04 in customizing. Please look at the following customizing items:
Transaction QCC3
-> Inspection Lot Creation
- Maintain Inspection Types
- Maintain Inspection Lot Origins and Assign Inspection Types
By activating the correspondent inspection type in the material master you can decide which inspection type is used. If you need both then you could think about using the exit QAAT0001 to assign the correspondent inspection type.
Regards
Isabelle

Different delivery type for inbound delivery

Hi,
Somebody knows if it is possible to assign diferent delivery types for inbound delivery from differents document type of PO?
for example, delivery type EL for "NB" PO and delivery type "ZEL" for UB (Stock Transp. Order).
thanks
RZ

Dear,
Check: Different inbound delivery types from PO conf control keys
Regards,
Syed Hussain.

Inspection type for STO with delivery and billing , two step procedure

Dear All,
We've STO scenario between two company codes, plant '1000' of company code '1000' supplies goods to plant '2000' of company code '2000' using STO. We'd like to evaluate the supplying plant for vendor evalution with respect to receiving plant,
Please suggest , which inspection type '01' or '08' needs to be activated in the material master in receiving plant '2000' in order to consider the supplying plant ' 1000' for vendor evalution. and kindly let know me that whether the functionalities of QM procurement (Checking receipt of certificate while posting MIGO) can be used in STO scenario similar to normal procurement scenarios,
Here, we are going for STO scenario of two step procedure with outbound delivery & billing.
Thanks & regards,
rajesh

The inspection type '08' is used for stock transfer order process.
In SAP standard you can't evaluate the supplying plant but external vendor only.
Also the functionalities of QM procurement can influece or control it when materials are procured from external suppliers.
If you want to use the functionalities of vendor evaluation and QM procurement, I would suggest you implement normal procurement process, not stock transfer process.
Regards
Luke

Output Type for Outbound Delivery in VL02N

Hi All,
Could you please tell me how to maintain output types for a specific outbound delivery in ECC , so that inbound delivery is created automatically from it? is it maintained in VL02N? I actually searched this on various forums but did not find the correct answer, as everywhere only the customizing is given.
Thanks in advance
Best Regards,
Abhijeet

Hi,
You can maintain the output type SPED as below. Once you do PGI, SPED should be processed. If not , do it manually from VL71.
VL02N -> Extra>Delivery Output -> Header> Output Type = SPED
Regards
Edited by: Shashidhar Shetty on Dec 5, 2011 1:59 PM

Inspection Type for Material

Hi
I want to know wt are all Inspection types are created for Material...
Can any body help me wt is the Table name to get Inspection type Details?
Regards
Smitha

check this Link: [Link|http://forum.saptechies.com/viewtopic.php?t=1973]

Blocking of Inspection type for manual transaction

Dear Experts,
How to block a particular inspection type while creating a inpection lot manually using QA01 .
Thanks.

Hi SAP Lover,
Mr. Syamal said very right , Your Basis guy can assign the authorization in such a way that this object type can be blocked. You want to block '01' inspection type to restrict and other inspection type are OK to make the manual inspection lot then it is quaite possible by just restricted the inspection type '01' object.
Regards.

IDoc type for Outbound Delivery

Hi All,
Can someone please tell me the IDoc type and message type to be used for creating the outbound delivery for an incoming IDoc? Also, I would like to know the function module.
Regards,
Raghav

Hi,
Message type is DESADV
Basic type is DELVRY01 to 03 (can check the latest version or supported version)
Function module : BORES_IDOC_INPUT_DESADV1 or IDOC_INPUT_DESADV1
This is used for creating outbound deliveries, shipping noticfication etc.
Regards
vk

Random inspection of 04 inspection type for batch material

Hi
My requirement is that against one production order confirmation several batches of 04 insp type are to be created. 1st batch must go for quality check. For other batches configuration will be such that we can chose random batches for inspection if necessary.
But if I activate 04 type in QM view, wont it create lot everytime batch is generated?

I think your problem will be the requirement that this is done for the first batch of the process/production order.
I don't think you can get the DMR to reset to the first stage, (i.e inspect first batch), when you create another order.
If you are using an order for a given time frame, i.e. one week, or one day, or one month, you can then set the the maximum number of days to reset. But that might nto work well depending on when you create the first lot on the frist stage. I.e. you create new orders ever Monday. (once a week). But you don't create the first batch until Thursday. The second batch is made on Thursday also and is now a skip lot. Your maximum days at skip is 7. The DMR won't reset until the following Thursday. But on Monday you create new orders. All receipts will be skip lots until Thursday.
FF

Goods Movement Type for Inbound Delivery

Hi all,
up to know I always thought that when posting a GR to an Inbound Delivery this happenes with MVT 101.
In my current project MVT 103 is used; but only if serialized materials are concerned.
Does anybody have an idea where/how I can control this?
Nor in the ser-no.-profil neither in the confirmation key sth relevant is stipulated....
Or coulkd it be that an exit is behind? If so, is there a possibility to find it out?
bR
Thomas

Hey,
many thx; seems to be very "hot".
They use a special IC (ZSN) for serials.
Unfortunately your mentioned link does not work ("Page not found"). Could u pls. check it?
Looked in T184L, clear so far.
What now is "missing:" Where/how is Movement Type determined?
Thx again
Thomas

Output Type for Deleting Delivery Notes completely

Hello,
I've a problem that in case of complete deletion of a delivery note I want to get message of deletion via IDOC DELVRY05. Normally the complete document will be deleted without any outbut determination.
Where do I have to implement this? Is it in normal output determination for outbound deliveries?
Thank you for your effort.
Kind Regards
Norbert

*

Creating inspection lot for vendor returns

Hi All,
In Subcontracting, components are sent to vendor using Mov Type 541, if vendor returns the components without any value addition we recieve the goods with Mov type 542.
Now, when we recieve the goods using 542 customer requires that the material has to be posted to quality inspection and a lot has to be created.
I have already tried with inspection type 08 but its not working.
Any ideas how it can be done?
Regards
Naveen Goveas

Hi Naveen,
You have come across a common problem in later releases of SAP. Ram is nearly right in the settings for control of inspection lots for goods movements. In the standard system movement type 542 has no inspection lot origin assigned, so even if you have maintained an inspection type for your material there is no "trigger" for the inspection lot creation from that movement type. Unfortunately, you cannot change the inspection lot origin settings for movement types. The only choice you have is to create (as a copy) a customer defined movement type (one which already has the appropriate inspection lot origin assigned) and use that instead. You have to also be careful about the 'Quantity' and 'Value' updating strings for your new movement type.
Hope that helps.
Colin

Inspection lot for inspection type 10,11,12

Hi,
My requrement is system should generate inspection lot at the time creation of sales order & before PGI.I assigned
inspection type 10,11,12 in QM view in material master.I have a quality planning with usage -3 & status -4.But when I am creating sales order & doing PGI system is not generating inspection lot.
manoj

Hi
check following QCC0>Qulity inspection>Inspection lot creation>Inspection at shipping>
Assign Inspection Lot Origin to Delivery Type
Assign agaist del type:
10 ; Outbound Delivery
11 :Delivery w/o Ref.
similerly for 12
Also
Assign Inspection Type to Delivery Category -->assign inspection lot origin & Inspection type for del catagory
Regards
Sujit

QM Inspection Type for SD Delivery in Returned Goods

Similar Messages

Maybe you are looking for