QM/MM: Stock transfer from QI to QI in different storage location

Hi Gurus,
I want to transfer a QI stock to QI stock in the same plant but different storage location using MB1B 323 movements. But it has got QM status active. So without taking usage decision it doesn't allow us to move the stock. It needs a special inspection type which allow this transaction.
I dont want to create another inspection lot and dont want usage decision.
Can anyone suggest me the solution?
Thanks
Shiv

Hi Laxman,
Thanks again for your suggestion to use QAC2.
Is there any way of of scapping the same stock stock having inspection lot , status QI w/o UD?
Thanks
Shiv

Similar Messages

Requirement date in reservation for Stock transfer from one storage locatio

Hi ALL,
I have activated the resevration creation by MRP for stock transfer from mail ware house to service storage location by creating MRP area for service storage location when there is requiremnt from service and when MRP is run on the MRP area the resevration in created and trasnfer order is created .but the requiremnt date in reservation is not the same asd of on service order.so kindly let me know why it is ahppening.

Hi,
check the GR processing time for the material . System may be adding GR processing time with reservation requirement to arrive at the service delivery date.
Regards,
Mrinal

Report for stock transfer from plant to plant

Hi,
Is there any standard report for stock transfer from plant to plant .
If not is there any enhancements to get the above report.
Regards,
Ravindranath.

Hi Ravi,
U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
if u want the list of stock transport orders then use tcode ME2N and the input parameter as item category "U" and generate the report.
hope it wud have answered ur question
Reward if useful
Shawn

Stock value for stock transfer from depot (RG23D) to manufacturing (RG23A)

Dear all,
The forum posts that I found are all relating to the process of how to do stock transfer from depot plant to manufacturing plant.
The question I want to post is relating to the transferred stock value.
When stock first goes into depot plant (RG23D), the excise duties (CVD, Education Cess, Higher Education Cess, Secondary Education Cess) are all inventorized. However, in manufacturing plant (RG23A), they are CENVATABLE and not inventorized.
In the transfer of stock from depot to manufacturing, how can we split out the stock value from depot and take out the excise duties to CENVAT in manufacturing plant?
If using Stock Transfer process (move stock from depot to manufacturing),
1. Create Stock Transfer Order in ME21N using UD order type
      no accounting
2. Create DO in VL10B and goods issue
During goods issue, moving average of stock in depot plant, will increase stock with the same value in manufacturing plant and reduce the stock value in depot plant. How can we reduce the stock value transferred to manufacturing plant by the original excise duties amount, and pass this amount into J1IEX? Is it done in this step or later steps?
   Dr Stock into manufacturing plant [this value by right, should be reduced as it consists of original excise duties in RG23D?]
      Cr Stock from depot plant
3. J1IJ- RG23D selection for excise invoice for delivery at depot
    no accounting
4. VF01 for proforma invoice
   no accounting
5. MIGO into manufacturing plant (capture excise invoice)- part 1 register. the excise duties can be manually keyed in based on the original RG23D entries when stock is first brought into originating depot plant
     no accounting
6. Enter Incoming Excise Invoice by J1IEX
     Dr CENVAT Input AED
     Dr CENVAT Input BED
     Dr RG23A ECess
     Dr RG23A SHECess
           Cr CENVAT clearing
7. Question: Where to Debit CENVAT clearing? In normal domestic purchase process of raw materials into manufacturing plant, Dr CENVAT clearing will be posted during MIRO time.
If this process is not the correct way to do, please advise the standard SAP recommended way to transfer from depot to manufacturing plant.
Thank you in advance.

You have to add the Excise duty condition types as a Delivery cost Pricing condition types in STO Pricing procedure and have used them in STO. In Pricing procedure, there is no concept of Deductible and Non Deductible. So, what ever the Delivery cost condition you add in Pricing procedure, the amount gets loaded on to the Material cost..To avoid this, a negative condition type needs to be inserted in Pricing procedure with a different accrual key.
You have to add One Positive condition and One Negative Condition type for the same. Negative condition type is to reduce the condition value from the Material cost during GI.
Try this scenario in development server and revert back with your observations.

Stock transfer from plant to depot

Dear Experts,
I have used special procurement type along with additive cost in DEPOT.
There is one more tcode-okyo- Assign origin group to condition type.What is the use of the same?.
one more doubt in STO from Plant to depot
lets say- material(A) standard price in depot 120rs including excise/freight and 100rs in plant
while doing transfer system will dr 120 depotand credit 100 plant and 20 in depot cost center.
I m transferring this 20 rs to depot cost center and when actual freight is coming.i will book the same in depot cost center.
So 20 rs will knock off in depot.
Is it correct approach?
regards
Raman Rana

Hi Ajay,
If i will maintained Moving price at depot and standard at plant.
Lets say stock transfer from plant to depot
Standard price at plant 100rs
Price at depot=standard price at plantfrieghtinsurance= 120rs
So my inventory a/c at depot 120 rs DR
          inventory a/c   at plant 100 rs with standard price
          frieght and insurance clrg a/c 20 rs
When i got actual bill of frieght and exceise
let say 25 rs
I will debit    frieght and insurance clrg a/c 25rs
                   credit vendor a/c                     25rs
In that case i have difference of 5 rs in clrg a/c
Is it correct? or any other way for doing it?
regards
RR

Stock transfer from a Depot to a manufacturing plant

Hi All
I am doing a stock transfer from a Depot to a manufacturing plant.
I have transfered the material from depot to plant and captured the excise
in register RG23D using transaction J1IJ.Now a goods receipt in done in
the receiving plant in refernce to the outbound delivery.
Now the problem is when a excise is captured using transaction J1IEX in
reference to a Goods Receipt and manually enter the details in the system , it gives me a
short dump of BCD_Divide by Zero.
Please advice

Hi,
Go to transaction ST22 it will give you a comprehensive analysis of the dump including the reason. Looks like there is erroneous data.
Regards,
Saurabh Diwakar

IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)

Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
Prashant

Hi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore

What movment types used for stock transfer from Non-WM sloc to WM sloc?

Hello experts,
Can some one tell me , what movment types used for stock transfer from Non-WM sloc to WM sloc in the same plant through MB1B?
Thanks

Hi
When I try to use the Movement Type 311 with Tcode MB1B, in order to move the stock from IM storage Locations to WM storage Locations, I do create the Material Document Successfully, but when I try to convert the Material Document to Transfer Order, I get the message "select atleast one storage type first", but there is no storage type appearing on the screen.
Can you please help me to resolve the above issue.
Thanks.

Stock Transfer from One Store to Store

Hi Retail Gurus,
I have just entered working on IS Retail,basically I am an SD consultant.I have a Client who has implemented IS Retail.
Now,coming to the query,I want transfer the stock which is in Store A to Store B without any Valuation.
Kindly Help Me,
Vishal

Dear Vishal,
When articles removed under stock transfer from one site to other site, the overall inventory valuation, at company code level, remains same. Because, inventory valuation must remains same, the accounting document is posted at the time of PGI (post goods issue) from sending site.
SAP Support following Stock transfers;
(1) Store to Store single step using 301 mov. type
(2) Store to Store double step using 303 & 305 mov. types
(3) STO with SD route using 641 & 101 Mov. type
Price: Always....Valuation price + Delivery costs if any
Steps are as below for option No. 3
1. Create Purchase Order using transaction code ME21N using document type UB
2. Create outbound Delivery using transaction code VL10B
3. Post Goods Issue using transaction code VL02N
4. Create Goods Receipt against STO Purchase Order reference using transaction code MIGO
Hope this information will be useful.
Bye,
Muralidhara

Stock Transfer from WM Sloc to non WM Sloc

Dear Friends
We have 2 Storage location where one is WM relevant and other is not.
when we do a stock transfer from WM S.LOC to Non WM sloc, the system creates a TR and when creating a TO system does not automatically consider FIFO or even does not search for the storage type and bin. This has to be manually entered.
Can we automate the process of system choosing FIFO meanthod and searching for a Storage type and bin
Your inputs shall be greatly appreciated

Hi
Thanks for the answer,
However, the problem was missing input in Stock removal for the storage type. When i assigned the FIFO strategy, the system was automatically picking the storage type and bin based on FIFO
Thanks once again
Edited by: Anand1981 on Dec 14, 2010 12:22 PM

Stock transfer : From QI to Unrestricted

Hi Gurus,
When I do stock transfer from QI to Unrestricted or blocked, delivery is created and when I go to pick delivery I get following error:
"Select at least one storage type first"
Message no. L3284
Can any one help me out?
Thanks in anticipation.
RajaRam

hi
pls maintain picking storage type.
by
ram

Stock transfer from bin to bin

hi,
In stock transfer from bin to bin process i need solution for the below requirement...
a)The system must raise a warning when a material is transferred to another bin, which already contains the same material with a different batch number.
b)Transferring stock to a single batch location which already contains another material/batch is not allowed.
In bin to bin stock transfer process, it is possible by system to propose destination bin automatically ?
Thanks
Muthuraman.D

The requirements that you have may be fulfilled using 'mixed storage' options available in the storage type configuration. However, there are rigid prerequisities to use certain options such as usage of storage unit management and bulk storage strategy. You may look into a custom putaway strategy (MWMTO003) to fulfill your requirements.
As for automatic proposal of bin during bin-bin transfer, it is pretty much the same set up that you'd use for any other putaway. This includes, enabling storage type search (sections & bin type, if applicable) along with indicators, defining the relevant putaway strategy, and assignment of indicators in the material masters.

Stock transfer between 2 different storage location

Hello ,
Is anybody can help ? We have below scenario :
Plant : P1 P2
WH : W1 (W1 cross 2 different plants P1 and P2)
Storage Location : S1 S2 under W1
We want MRP can trigger the replenishment between 2 different storage location within same warehouse
but the warehouse is cross 2 plants
Thanks !

Dear Denny,
Pls. maintain following setting which will fulfill your requirement :
Go to Material Master -> MRP-2 View -> Special procurement type
40 Stock transfer (proc.from alter.plant)
Try above & revert in case any doubt.
Hope this helps.
Regards,
Tejas

Picking quantity from a different storage location during batch split??

Hi Gurus,
Have an issue with doing batch split in a delivery with batches from several storage locations.
Have delivery XXXXXX where I want to pick batches from several different storage locations.
I click on the batch split button and select the different batches and quantitys.
The issue here is that I would like to have the different storage locations entered automatically based on the selection of the batch I have made.
The only storage location that is entered here or possible to be entered is the defaulted storage location that is in the first screen...
My question is why can I get the storage location where the batch is located and acctually exists when I do select the batch in the batch split...
The table LIPS and LGORT is not filed with the storage location so I do not know how I could fill this field with the correct storage location data...
Thank You for all Your help!
BR,
Christian

Hi Christian,
you have not jet got an answer -- here my suggestion.
You have to use the Userexit Mv50afz1. Here you can do some checks and you can do a popup, where you can sign the LGORT, where the batch is.
In any case, you need an ABAPer
In documentation, there is signed, that you should not change database other as Save_prepare - and that's too late.
In one solution at my company, i show in a message the right information. In an other solution, i made a modification of table lips.
But dont change the index of the current lips/xlips. That may have the effect of incorrest LIS - System.
If nessesary create an ylips- Line of the position.
Use an assign-command to avoid the change of the index.
hans

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

QM/MM: Stock transfer from QI to QI in different storage location

Similar Messages

Maybe you are looking for