QM/MM - STOCK TYPE PROBLEM - Pharmaceutical Industry

In January 2005 we changed the material master 220072 to deactivate inspection set up for inspection type 01-05-08 and to change the QM control Key from Z0002 to 0001.
The characteristic BC_USAGE_USAGE_DECISION of the relevant material batch class (ZBC_220072) has been updated accordingly to RELEASED.
This workaround allows inbounding the material directly into unrestricted.
Since the Scheduling Agreement/purchase master data wasn't updated, the stock of the first inbound after this change just received was posted in S (blocked stock).
WM operator did the reverse of good issue.
Purchasing data maintainer updated the QM Control KEY to 0001. (Purchase Document IP00000012).
WM operator inbound the batch again but the batch has been posted in S too.
Scheduling Agreement was created on 30-Jul-2003; with relevant line item added on 25-Aug-2003 - it looks as though it is not reading the updated material master data.
Is there a solution? Which data must be changed to resolve the problem?

Question not answered; workaround accepted by business.

Similar Messages

Transfer Posting problem with "sales order stock type" status

Hello, i have this problem, i spend 2 days looking in the forum, but
nothing, the question is:
The SD users sell an item, and the item get the status of "sales order
stock type" in the MMBE, but at the same time, the MM user made a
trasfer posting in two steps, he take out material with transaction
MIGO, mvt 351, to another plant, but the materail was already
compromised with SD; now he cant sell the items, because he dont
realize that the material was in sales order stock type, and he already
transfer it to another plant. how can i block this? if a material in
MMBE is with "sales order stock type" status, he CANT transfer it with
351 mvt type, what config i have to make? thanks a lot!!!!
now the quantity of the unrestict use
stock is lower than the sales order, we dont want to have this issue,
thanks again
Edited by: Alex Arti on Aug 6, 2008 7:14 PM
Edited by: Alex Arti on Aug 6, 2008 7:16 PM

Hi!
Have you recently upgraded to EHP4? In this case, please, check the note 1441195. This note should solve the issue that you are reporting.
I hope this helps,
Esther.

How to Change stock type of SERIAL NUMBER using IQ02 ?

Does anyone know how I can change the stock type from stock in transfer (stock type 04) to unrestricted stock (stock type 01), using IQ02?
Quantity of material is updated while posting document with movement 313 but the stock type of Serial is still not updated.
I will really appreciate a response.

Hi,
Stock in transit is not a stock type.
Stock in transit is "Quantity of a material that has already been withdrawn from storage at the issuing plant on the basis of a stock transport order, but has not yet arrived at the plant to which it is being transferred (receiving plant)'.
and you can do sto only from unrestricted stock.
There are three types of stock which are provided by SAP -
1) Unrestricted use stock;
2) QI (Quality Inspection) stock; and
3) Block stock
and Special stocks which are all coming under above three types of stocks only.
for your problem first you do GR, in MIGO screen you can select stock types.
if your material assigned with serial number, when doing MIGO itself, you will be asked to enter the serial numbers(if it is manual assignment).
Edited by: Prabhaharan SAP MM on Jul 19, 2011 10:03 AM

How to change stock type of GR in BAPI_REPMANCONF1_CREATE_MTS

Dear All,
We faced a problem at confirmation in repetitive manufacturing. Actually we would like the goods-receipt(GR) to be posted to quality or blocked stock. If we use the transaction MFBF, there is an option where we can set it. The menu path is Edit->Change detailed settings. There is the stock type. The material document has been posted correctly as it is expected. But when we want to post the confirmation through BAPI_REPMANCONF1_CREATE_MTS, I did not find any option to enter the stock type. I also looked for some solution on the internet, but so far I have found nothing. Does any of you have any experience or idea how to solve this issue?
Thank you in advance!
Rgds,
Viktor Bojtos
Hungary
Edited by: viktorbojtos on Sep 10, 2010 5:49 PM

Dear All,
The promlem has been solved by myself. In user-exit XMRM0001 (EXIT_SAPLBARM_001) we have the chance to set the stock type. There is an import strucutre I_RM61B which is created based on strucutre RM61B. If we enhance the structure RM61B with additional field (ex. ZZINSMK) we can pass the relevant value to the user-exit trough this structure, because it is available in the BAPI as import parameter.
Rgds,
Viktor Bojtos
Hungary

How to know which stock type updated within movement type

Expert,
I need to know which stock type updated within each movement type.
I'm using two different system (SAP and Oracle) which is in each system updating stock. So i need to do stock calculation manually from that two systems.
I'm planning to imported material document data (from MKPF & MSEG) to Oracle and then combine the stock calculation.
And then i'm facing this :
Ilustration :
MIGO transaction - Goods Receipt PO - Stock Type Unrest
in MSEG field BWART : 101, SHKZG : S, INSMK : blank --> no problem
MIGO transaction - Goods Receipt PO - change Stock Type to Quality Inspection
in MSEG field BWART : 101, SHKZG : S, INSMK : 2 --> no problem
MIGO transaction - Transfer Posting - movement type 322 (reversal QI to Unrest.)
in MSEG field BWART : 322, SHKZG : S, INSMK : blank --> problem
in MSEG field BWART : 322, SHKZG : H, INSMK : blank --> problem
I have a problem that in MKPF & MSEG there is no indicator which stock type updated within movement type (BWART) 322.
How to know that first row will be updating stock QI and second row will be updating stock Unrest.??
I've already checked to OMJJ, SM30-V_156SC_VC, table T156... and still having no clue.
Or is it just a 'hardcode' ? And i need to do 'hardcode' too in Oracle system?
Thank you so much.

The stock type indicator doesn't update for the movement type 322 in table MSEG.
At the time of transferring, you do not have to enter the stock type for movement type 322.
I can give you one clue, check can it fulfill your requirement.
You have two line items for movement type 322 in MSEG table, There are a field XAUTO will be updated as X for credit entry.
You can assume, the line item (without value for XAUTO) is for less from QI stock and the line item (with value X for XAUTO) is for add to unrestricted stock.

How MRP Run exclude QI Stock Type of a Raw Material SLOC?

Dear all
Fact:
All of our raw materials must be subject to quarantinee upon GR. We have Storage Location of Raw Material: RMSL
In Material Master of that Raw Material
We are using the "SLOC of EP" (MRP View 2) to put the defaulted GR SLOC. And we also make use of the "Post to QI Stock" in View: Purchasing.
Upon GR:
During GR, the Raw Mat SLOC (RMSL) will be copied from "SLOC of EP" of the material master data, and it will be posted to the stock type "QI STOCK".
Problem:
However, when the MRP Controller run MRP, it will take the QI Stock Type of Raw Material SLOC into account.
Is there anyway we can exclude the QI Stock Type of Raw Material SLOC from MRP Run?
I have read from some threads to suggest to post it to the Quarantinee SLOC. We prefer not to create another Quarantinee SLOC (QISL) which will be filled in SLOC of EP and then after passing QC, we perform Transfer Posting from SLOC: QISL to SLOC: RMSL. We have a few Raw Material SLOCS and we do not want the Warehouse guy to get confused which Raw MAterial SLOC to choose upon GR. Rather, we prefer it to be defaulted in the "SLOC of EP" in the material master.
Please advise.
Edited by: Daimos on Jul 13, 2009 1:16 PM

Hi,
Generally MRP consider stock from all the storage location when run the MRP for Plant level for material.
However we can exclude the particular storage location from MRP Run, for those following settings to be done.
Go to MRP-2 View of material master and select the storage location to be excluded from MRP. (Press Shift +f1 ex .sloc2) As per your case it should be RMSL
In that MRP view go to Storage location MRP Tab.
And assign u201CSLoc MRP indicator = 1 (Storage location stock excluded from MRP)u201Dand save.
Now run the MRP, stock from sloc2 will not be considered to create-planned order.
Please try this and revert back.
Cheers,
Kumar.S

08 inspection type problem.

Hi,
We are planing to use standard inspection type 08 while receiving the material from STO. We activated the 08 (we are also using 01) inspection type in the material master (in the receiving plant). Please also note that we have not excluded any movement type from QM. Here we are using standard 101 movement only for GR from delivery against STO. And all 101 movement types are allowed for QM. But still system is not selecting the stock type as Quality inspection while STO creation. System is selecting unrestriced use stock only by-default. If you manually select the stock type as quality stock...then rest of the cycle is perfectly o.k.
What could be the problem? Anybody could help me in this regard?
Regards.

I think you wonder why the stock type is "Unrestricted" on STO's item detail even though the inspection type "08" has been activated.
I agree that the stock type confuses us sometimes.
Anyway SAP says the stock type is set by default setting on transaction MIGO and it is not important if configured.
It means that the stock type is updated correctly when a material document is posted.
Don't worry that the stock would be posted to insp. stock even though the stock type is not "Inspection stock" on STO.
Regards
Luke

Change stock type in IQ02

How to change the value of the stock type using IQ02? Do I need to do any configuration in SPRO in order to make it modifiable? Currently in IQ02, this field is not allowed to change.

Hi Yean,
in my system i'm able to change the Stock Type. i think some thing you are missing , may be as you said it is the config problem.
Regards
vijay

IDoc Error in LSMW for MB1C - Special stock type is E

When we use MB1C for GR to enter initial entry of stock balance into unrestricted stock for special stock type is E.
The document is Posted.
But, when we use LSMW for the above Transaction, the document is not posted.
In the Inbound processing of IDOC has the status "Application document not posted".
In the IDoc Status record gives
current status : 51 ("SD Document XXXXXXXXX is not in the database or has been archived"
Pl explain how this problem can be addressed.

Hi,
It seems that the stock indicator in E demands for a sales order in the MB1C transaction. The sales order provided by you in the flat file is getting validated by SAP and that sales order is not available in the system or might have been archived.
It is better to provide a live Sales order to book the stock to that particular sales order. If in case if the Sales order mentioned by you is closed or not required, in such as case the material can be stored under unrestricted stock and not under the sales order stock
Thanks and Regards,
Dilli Babu R

LS24 stock showing up as negative with stock type Q

Hi Gurus,
Can anybody please help me through this issue. The quality team passed an inspection lot and i see that there is a mterial doc generated with movement type 321 with a storage type 922, storage bin TR_ZONE stock category Q and posting change number on the WM tab of the material doc. Now i also see that there is this quantity of material showing up in LS24 with a negative sign and stock type Q. Now what do we need to so that the entry for the material goes away from LS24 and that the user can move this material from storage type 922 to 003 (where we usually store all tyhe materials).
Thanks
Anusha

As susggested, i tried to creat the transfer order from LU04 and/or LT06 and i get the error message.
No quants exist for posting changes
Message no. L3094
Diagnosis
No quants requiring a posting change were found.
Procedure
Check your entries.
Also to give little more background on why this problem could be happening is, all these days we used todeal with 101 movement type for international purchases. But recently we went with 107 and 109 movement types for international purchases. The advantage of doing this was, some of our vendors were on 30 days payment terms and it usually takes 60 days to get the material via ocean to US. PLus we take the ownership of material in Asia. So the way we handled this was the moment ownership is taken we would do a 107 (here inspection lot will not be created as the material is still on the water, this is made in config), which would then allows us to post invoice and process for payment, then finally when the material arrives at our plant in US, then we would do a 109 (during this inspection lot will be created, i made this entry in config). I'm starting to think that this could have impavceted somewhere in WM. By the way we only have one plant that is warehouse managed, rest of the other plants are not WM managed. I hope this background will help is solving this problem
Thanks
Anusha
Thanks
Anusha
Edited by: anusha vemulapati on Aug 16, 2011 2:54 PM

STO: Delivery - Stock Type Issue

I have created a delivery for the STO. I am not able to Goods Issue the Delivery. The error message is " Unable to determine stock type".
Can anyone suggest what could be the problem?
Tom

Hi
what is exact error and message number?
regards
Srinivas

Physical inventory document not showing the warehouse stock type in MI24

Hi Friends,
I am facing two issues.
1. In Production system, after executing MI31 for plant 3070, if i see the report in MI24, in Plant 3070, sLoc 0010, for some materials Warehouse stock type is not coming even though the materials are warehouse managed and having warehouse management views are there in material master. for some materials warehouse stock type is coming in the same plant and sloc.
2. In qulaity system, afetr executing MI31 for Plant 3070, no PID is generated for Sloc 0010 even though the sloc is having materials and those are warehouse managed and having warehouse management views are therein material master.
where i need to check for the problem,
Please help me in resolving this issue, this is high priority for me.
Thanks in advance,
Ravi.

>
Ravi Kumar Bittavarapu wrote:
>> 1. In Production system, after executing MI31 for plant 3070, if i see the report in MI24, in Plant 3070, sLoc 0010, for some materials Warehouse stock type is not coming even though the materials are warehouse managed and having warehouse management views are there in material master. for some materials warehouse stock type is coming in the same plant and sloc.
>
> 2. In qulaity system, afetr executing MI31 for Plant 3070, no PID is generated for Sloc 0010 even though the sloc is having materials and those are warehouse managed and having warehouse management views are therein material master.
>
> where i need to check for the problem,
>
> Ravi.
in your training documents (just kidding) .
You wrote that your storage location is warehouse managed. But MI31 is the transaction to craete physical inventory documents for a non-warehouse-managed location.
You have to create your physical inventory with WM transactions like LX16.

Default stock type as quality inspection when i create Stock transport orde

I want default stock type as quality inspection when i create Stock transport order with T-code Me21n.All the settings in he material master are maintained for inspection type 08. (donot wnat to change the stock type manually,it should come as default)Please provide solution.

Hi
This is not QM setting this is Achieved by MM setting in SPRO.
SPRO>MM>purchasing>PO>define screen layout at document level>select UBF(STO) or ME21n>overview>GR/IR control>
select Qulaity inspection--> decheck the Opt Entry click on Display.
This will solve your problem
Regards
Sujit

Stock on posting date with storagelocation,batch and stock types informatio

Hi,
I'm needing a report (similar funtion of MB5B) which must reveal the stock postion (closing balance) of the materials on a particular date alongwith storage loactions, batches and stocktypes (Unres/Q/Blkd).As such MB5B either gives the output either by storage location or by batch, not the combination of both.
Else provide any possibilty means( Database tables) from where i could arrive these mention outputs.
I could be able to get the information by collecting the values from MKPF & MSEG tables. But this information only suffice the material movements carried on that particular date.. And i will be not having the closing balance as a whole.
I even wonder to get any such a kind of information in which i could able to get the stock with stock types(Unres/Q/Blkd).
Any light on this matter is highly appreciable.
Regards
Prasanna

Hi Amit Bakshi,
Thanks for the reply..
I executed the suggested program but i found the same kind of information aslike in MB5B..
The information all i'm looking is to get the closing balance of the given material with storagelocations, batches and stock types on a given posting date.
For eg.
On 15 / 03 / 2011
Material A
Batch       Slocation       Stock type               Closing balance Qty.
A1              S001               Unres.                             50
A1              S002               Unres                            120
B1              S001               Quality                             15
C1              S003               Blocked                            30
In MB5B i could able to get the values of closing balance either Storage location level or by batch level but is it possible to get the combination of both along with stock types?
Reg
Prasanna

How to block vendor invoices when GR is made to stock type 2?

Hi,
I would like to get your advices on the following case:
- I need to be able to block vendor EDI invoices from payment when GR is made with 101 to stock type "2", Quality inspection. Manual blocking is not the case here but SAP should block invoices automatically in these cases. Is there any user exit available for this? Invoice blocking should be made also in the case when initial GR is made with 107 (in this case invoice is blocked by standard) and material is then released from valuated GR blocked stock with 109 to stock type "2", Quality inspection. In standard system vendor invoice is now unblocked but my customer needs to have an invoice still blocked as material is in quality inspection stock type.
Please advice.
Br,
Tapio

Hi,
Refer this post
http://forums.sdn.sap.com/thread.jspa?threadID=1488428
You will get the idea

QM/MM - STOCK TYPE PROBLEM - Pharmaceutical Industry

Similar Messages

Maybe you are looking for