QM-Movemetn types?

Hi ALL,
Does anyone know the movement type when we post the material from QI stock to Scrap and Reserve,in Usage Decision QA11??Thanks inadvance

Please check table T156 in SE16.
also go to MB1B transaction and press F4 on movment type.
regards
Srinivas

Similar Messages

Consignment Settlement By MRKO

Hi Friends,
I know the consignment process from Consignment Info Record to MIGO. But when I am about to settle the consignment by using the T.code MRKO, I am not succeeding. Although when I am executing MRKO, i am getting the list of Consignment Stock. Further how to settle it, I don't know.
Plz help me out.
Thanks & Regards
Saeed Arif

Hi
For doing consignment settlement we have to use MRKO. What are the necessary steps to be followed while dealing with this T.Code MRKO?
For doing consignment settlement.
you should have consignment PO ( item category K) with tax code
Info recore is must with consignment
when u received the good through movement type 101K no accounting do will generate. since it is not valuated materila ( it owns by the vendor)
Transfer the consignment materila to own (movemetn type 411K ) or Goods issue to consumption( movement type 201K) ... now accounting document will generate.
settele the the account through MRKO transcation.
If you find error that messeage determination not set.... go the SPRP setting ..logistic Invoce verification > Messeage determination >>> maintain condition >>> create condition.... create for KONS
Hope this will useful
Regards
Anand

Vendor consignment M7001 Error

hi.
While doing the GI for raising the vendor consignment liability from MIGO with 201 K mvt type, after entering the vendor, the system is throwing such message.
"In table XMRES the entry 0000000000 0001 is missing"
Please provide me a path to follow on.
Thanks for your time!!!!!!

Hi,
Had your PO is having the Item category as K ( consignment) ????
Once you received from the vendor with respect to consignment PO... it will be in movemetn type 101K ( consignment stock)
Now... u can issue to cost center (201K) or you can take to your own stock ( 411K)
as per your 2nd answare ( but my GR is to unrestricted stock warehouse stock only??)
it is understud that you have already taken vendor consignment stock to your own stock...
Now if you want to issue to costcenter you have to take only 201 movement type.... not 201K
Hope this is clear to you r question.
REgards
anand

Goods Reciept issue

Dear All,
during goods rreciept using movemetn type 561 initial entry of stack balances
i am getting the below error
account type M and G/l account with open item management not permitted
kindly advise
Mohammed Raees

Hi Mohammed,
Please go through the link given below and specially read the 6th post (Ravi Sankar Venna).
Re: Open Item Management Error
Hope it helps,
Regards,
MT

Necessary Fields For Creation of Service PO of Order Type Relaese Order.

Dear Guru,
I have encountered an issue which i am trying to resolve...
My this requirment will seem little okward the way i am asking but i have no way...
The issue is I have to create a Service PO of Order type Release order (RO) using BAPI Function Module .BAPI_PO_CREATE1.
The service PO should be of multiple Item and services for particular line item should be multiple.
When I am creating this using ME21 or ME21N i am facing no issue.
But when i am using BAPI Function Module .BAPI_PO_CREATE1
i am getting following errors ;; The error which i am getting as below
T ID                   NUM MESSAGE
E BAPI                001 No instance of object type PurchaseOrder has been created. External reference:
E MEPO              000 Purchase order still contains faulty items
E SE                   029 Please maintain services or limits
E SE                   140 Service HIRING OF LCD: please specify unit of measure
But I am failing to findout in which field services or limits and unit of measurement have to maintain.
What are the necessary fields have to pass in Bapi import parameter and the table i am unable to findout.
Please show some way how to resolve this or give me some guideline to resolve this
Dear Moderator request your kind intervane to move this qurry into correct forum if i have asked this in wrong forum
Thanks and regards
saifur rahaman

Hi Saifur
Can you please elaborate how did you resolve the issue we are also facing same problem when we are trying to create the PO for service items through SRM it is throwing same error while creating the PO in SAP.
Email Id : [email protected]
Thank you in advance!!
Regards
Deepika

The codition type of free goods lost.

We are facing a problem about the codition type of free goods.
Our business flow is:
1:customer order 100 DR material A from CRM.he entered the requited number in item 1.
2:we transferred the order into r/3 system.and we define the free goods in r/3.the
policy is that we give customer 1 dr free of charge when they buy 10 dr.
3:when this order has been transferred into r/3,the system automatically add a line
with 1 DR free of charge.
4:in normal,in item 2,it will contain a condition type 'PR01' and 'NA00'.the 'PR01'
is the price and the 'NA00' is the 100% discount.
Nut Now the condition type 'PR01' and 'NA00' in item 2 lost.

ANYONE KNOW THE REASON?

Set file type associations in Adobe Bridge for Photoshop CS6

Is there a way I can edit the registry so that in Adobe Bridge, under edit, preferences, file type associations, the jpg extension is forced to use the 32-bit version of Photoshop? I can do it manually, but is there a registry key i can export to apply it to multiple computers?

Yes, in theory, but it is generally not recommended. But that location would depend on what OS you are on. This video give the locations for the Photoshop files, Bridge would just be in a neighboring folder: http://tv.adobe.com/watch/the-complete-picture-with-julieanne-kost/how-to-reset-photoshop- cs6s-preferences-file/

Cannot assign an empty string to a parameter with JDBC type VARCHAR

Hi,
I am seeing the aforementioned error in the logs. I am guessing its happening whenever I am starting an agent instance in PCo. Can somebody explain whats going on?
Regards,
Chanti.
Heres the complete detail from logs -
Log Record Details
Message: Unable to retreive path for , com.sap.sql.log.OpenSQLException: Failed to set the parameter 1 of the statement >>SELECT ID, PARENTID, FULLPATH, CREATED, CREATEDBY, MODIFIED, MODIFIEDBY, REMOTEPATH, CHECKEDOUTBY FROM XMII_PATHS WHERE FULLPATH = ? <<: Cannot assign an empty string to a parameter with JDBC type >>VARCHAR<<.
Date: 2010-03-12
Time: 11:32:37:435
Category: com.sap.xmii.system.FileManager
Location: com.sap.xmii.system.FileManager
Application: sap.com/xappsxmiiear

Sounds like a UI browsing bug (when no path is selected from a catalog tree folder browser) - I would suggest logging a support ticket so that it can be addressed.

Material type not getting displayed in the cube........

Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
Jeetu

Hi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier.

How do i add type kit fonts to muse web site

how do I +add type kit fonts to muse website

Hi.
Check this video, might be helpful
Let me know if you have any questions

Just installed Firefox 4. It hangs when I open any website and type in, for example, an ID, or even just click on something, for example, "Compose", in my webmail site.

Here's the detail of what happens.
1. Turn on computer and then click on Firefox icon on desktop.
2. Firefox opens. Everything looks OK. Mr Bunsen's graphic is working fine.
3. Click on any webpage link. For example, a newspaper or an online webmail page. All looks OK until
4. Click on anything or type anything, such as in ID in a box, and bingo, the top line of Firefox goes from dark blue to very pale blue and the computer is hung. You cannot get out of Firefox or get Firefox to work.
5. Switch off computer.
Is this perhaps due to a clash of Add-ons. I run Avast anti-virus. McAfee came with Firefox 4 and I did not reject it. Is it conflicting wth something in my system and causing it to hang?

You can modify the pref <b>keyword.URL</b> on the <b>about:config</b> page to use Google's "I'm Feeling Lucky" or Google's "Browse By Name".
* Google "I'm Feeling Lucky": http://www.google.com/search?btnI=I%27m+Feeling+Lucky&ie=UTF-8&oe=UTF-8&q=
* Google "Browse by Name": http://www.google.com/search?ie=UTF-8&sourceid=navclient&gfns=1&q=
* http://kb.mozillazine.org/keyword.URL
* http://kb.mozillazine.org/Location_Bar_search

Which type of invoices does RKBP contains?

Hello all,
I have report all Vendor Invoices(open/closed).
I know that tables RKBP and RSEG tables can be used for this. I have to retrive based on posting only.
Can anyone tell me does this tables contain both type of invoices?
i have few more queries.
Can anyone explain me wht is parked, complete and parket&complete invoice/doc types.
thanks

Hello,
In table field RBKP-RBSTAT has all the statuses you are looking for.
Parked: Information required to post the invoice document is still missing and you do not want to have to re-enter the data entered so far. The balance is not zero.
Parked and completed: No more changes should be made to the invoice document.
The balance is zero. The invoice document is flagged for posting but is not to be posted yet.
Thanks,
Venu

Open follow up transaction type screen automatically after confirm account

Hi Gurus,
I have a transaction type Z010 for interaction record that is copied from standart 0010 transaction type.
I define dependent transaction type SRVO that is service order as a follow up of Z010
My requirement is to open automatically open service order screen after confirming account
As agents must do everything vey quickly while they are on phone, it is needed urgently.
Now they have to open Z010 interction record screen, have to press follow up button, click to clipboard and then can open the scrren of service order.
How can we automatically open service order screen after confirming account??
I will be very pleased if you will help...
Thanks.

Hi Denis, thanks for reply.
I read it and see that interaction record is automatically created. How can it be made, is it a standard customizing?? Our interaction record is created automatically when follow up process-it is service order here- is created. First we confirm customer, then press to Interaction Record at the left hanside, then in this screen we press follow-up button, then click on Activity Clipboard, then service order screen is opened. I want to pass two steps, pressing Interaction Record and pressing follow up record, how can I do this??
Exactly I have to define process type Business Activity for interaction record, I can't give Service Order process type directly to interaction record. Service Order type must be dependent to business activity, is it true?? If there is a way to directly giving service order type as an interaction record type, and making interaction record creation automatically after confirming, my problem is solved as very well.

Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.

Hi there,
I use visual studio community 2013 to develop app for office. When I create app project using template and directly run it, it shows me this error: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
Can anyone help? Thanks in advance.

Hi holm0104,
Did you add custom code into the project? Can you reproduce the issue in a new project without custom code?
If not, did you have issue when you create a normal web application?
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

"Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information" while attempting to open UNIX/Linux monitor

We have upgraded our System Center to 2012 R2, and we cannot open any of the UNIX/Linux LogFile monitor property or the UNIX/Linux process monitor property for those monitors created prior to the upgrade. Error we get is below. Any assitance
appreciated.
Date: 9/30/2014 10:01:46 PM
Application: Operations Manager
Application Version: 7.1.10226.0
Severity: Error
Message:
System.Reflection.ReflectionTypeLoadException: Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
   at System.Reflection.RuntimeAssembly._nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.nLoad(AssemblyName fileName, String codeBase, Evidence assemblySecurity, RuntimeAssembly locationHint, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoadAssemblyName(AssemblyName assemblyRef, Evidence assemblySecurity, RuntimeAssembly reqAssembly, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean throwOnFileNotFound, Boolean forIntrospection,
Boolean suppressSecurityChecks)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, IntPtr pPrivHostBinder, Boolean forIntrospection)
   at System.Reflection.RuntimeAssembly.InternalLoad(String assemblyString, Evidence assemblySecurity, StackCrawlMark& stackMark, Boolean forIntrospection)
   at System.Reflection.Assembly.Load(String assemblyString)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.TypeContainer.get_ContainedType()
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.AddTemplatePages(LaunchTemplateUIData launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Initialize(Object launchData, Form form)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.RunPrivate(Object[] userData)
   at Microsoft.EnterpriseManagement.Internal.UI.Authoring.Extensibility.MomExtensionsCommon.Run(Object[] userData)

It's possible the upgrade did not update everything properly as it looks like a dll mismatch or a missing file. I'd open a support ticket with MS and have a support engineer look at the upgrade logs. What version of SCOM did you upgrade from?
Regards,
-Steve

QM-Movemetn types?

Similar Messages

Maybe you are looking for