QM Notification Follow-up Actions

Hi Guys,
I need a little help with QM again if you wouldn't mind!
QM notifications.
I would like to remove the x2 warehouse management fields from the popup box when you select the IM Blocked > Unrestricted from the action box.
Storage Type
Storage Bin
Please see attached photo for clarification.
As always many thanks.
Paul

Hi Amol,
The FM used is QMLR_BLOCKED_TO_FREE_STOCK.
There is also a QMLR_BLOCKED_TO_FREE_STOCK_ST2 I tried to select this one to check what the differences were and got the following error.
message no. QM403
QMLR_BLOCKED_TO_FREE_STOCK_ST2 does not have E_QNQMASM0 parameter
To put some light on why I'm trying to bypass having to enter the Wm fields I should give you the full back ground as this would help you understand why I would like to remove the WM and Sloc from the selection options when releasing material from blocked stock to unrestricted.
My original issue was when you try to post goods using the 343mvt via the QM notification I get i get error message no. L9042
Storage type MKX not suitable as an interface (SU management is active)
As we use Storage units to manage material in WM storage types.
We have a ZTable which creates the WM transfer order when material is released from blocked stock automatic.
I need a solution to either
Remove the WM fields from the FM used for blocked to unrest> message no. QM403
Or resolve the problem why material can't be transferred from blocked stock to unrest for SU active locations>message no. L9042
Many Thanks
Paul

Similar Messages

Triggering of Notification from Follow Up action

hi
SDN,
in calibration order. if i reject inspection lot ,system should trigger notification as follow up action.
Can any one suggest the name of functional module that can be assigned in follow up (QM customizing)action so that system trigger notification as inspection lot get rejected.
All other follow uop actions like.. order teco, equipment status change, etc. i have done and tested.
Regards,
amit

hi,
Thanx for promp reply. i have tried to assign these functional module in followup actions but system throwing en error . it's given below -
Function module QFDL_INIT_NOTIFICATION does not have E_SUBRC parameter
Message no. QM403
Diagnosis
The interface of the function module you entered is not compatible with the interface of the sample function module.
Procedure
Check the function module and add the missing parameters to the interface.
suggest how to proceed.
regards,
Amit kushwaha

Create notification as follow up action

Hi,
Can anybody explain to me which functionmodule (follow up action) to use for creating a PM notification from an inspection lot UD.
Thanks in advance
Peter

Hello Nehal,
thanksfor your reply.
I have linked the inspection type to a PM notification type and i want the Notification to be created on the Equipment.
I can already create if manually, from the inspection lot, but i want to do this automatically. In the selected set for the Usage decission, you can define follow up actions, but when checking the follow up actions I'm not sure which function module to use.
So which function module should i use? or are you saying that there is no standard function module and that i should write the function module from scratch?
There is no way to create a PM notification from the inspection lot with standard SAP?
If somebody knows, please let me know. Thanks
Peter

If Quality notification as follow up action fails

Dear all
I have a situation where Quality notification is configured as a Follow up action once the UD is made.
So I am getting Create notification screen once UD is filled and SAVE button is clicked.
In Case some wrong data is entered in the Create notification screen and I am coming out of Notification without saving the notification.
The status of the inspection lot is getting flipped to UDed as expected.
But is there any setting where i can define if the Followup action is not successful( Notification not created), then wont make the UD of Inspection lot also. (OR some user status will get updated saying Notif not created etc..)

Hi Navdeep,
Thanks to Anand for his correct feedback.
Please note that as per standard SAP, unless and otherwise there is a defect created, there can't be a 1:1 link with inspection lot with the notification, though in the notification header table there is a placeholder available (QMEL-PRUEFLOS) to capture this inspection lot field. You are trying to use a follow-up action wherein, after UD you are always creating a notification based on business case. I believe, the FM you are using in follow-up action, is not presently populating QMEL-PRUEFLOS. So there can't be a link to find out when there is failures in notification creation, but UD happening successfully.
You can try out the below approach -
Approach - 1
During the UD save process, there should be additional checks happening. Ask the follow-up FM to update QMEL-PRUEFLOS or TEXT field with inspection lot for all successful notification creation and UD update, and send a confirmation email to approver or task processing partners, or the UD processing user ID (This email part can be skipped in case if this is not required). In case of any failures in notification creation at save, it should truncate the UD save process too and send a message to UD processing user for this failure.
Approach - 2
You can create a batch job running at the background to validate for which inspection lot there is no notification created, even though UD is done. Send a mail to the UD processing user to create a notification, as that is not created. User can then create it manually it by updating TEXT field in notification in foreground.
Thanks,
Arijit

Quality Notification: Create Task as Follow-Up Action

Hi QMu2019ers
I have a requirement from my business, to create tasks as a follow up actions from completed tasks. Let me explain the process.
We have a catalog with 4 codes e.g. ZTS1 u2013 0001 to ZTS1 u2013 0004
When the user assigns ZTS1 u2013 0001 to a task in the notification and that task is set to complete, we want the system to automatically create the next task in the catalog, i.e. ZTS1 u2013 0002, when that task is complete the next task from the catalog is added and so on.
I have looked into follow-up actions for tasks, but there does not seem to be a standard option for this.
Does anyone know how I can implement such a solution?
Many thanks for any advice given.
Neil

follow-up actions of tasks is triger when the tasks are assigned into the notification, not when the task are completed.
Try user-exit QQMA0014, you can assign additional tasks before notification is saved.

Send mail from follow up actions for tasks in service notifications!

Dear All,
I want to send mail to the user from a follow up action in the task assigned to a service notification.
In customizing which function module I should select for follow up actions for tasks?
Thanks and Regards,
Satyajit P

Hi,
You can use function module QM06_FM_TASK_SEND_PAPER or QM06_FM_TASK_SEND_PAPER_ATTACH.The document is sent only after the associated notification is saved.You need to enter the function module "QM06_SEND_REPLY_STEP2" in Customizing of the action box as "FM when saving".

Follow up action in QM

Hi All,
Could any let me know what is the use and process of followup action in QM during notification.
Regards,
Satyajit

It is applicable for the tasks that you perform in QM notification.
In QS 42
code group catalog = 2
code group = *
in side select any code froup and then click on codes
for each code you can give follow up action, if this code is sellected in QM notification then system will trigger the follow up action assigned,
Std follow up cation given by SAP are
ABGLEICH     Comparison: R/3 notif. w/ SAP
AWE     Change request
CLAIM     Create claim
CLMMAIL     Mail from claim
CLMSIMUL     Create simulation version
DELIVERY     Create outbound delivery
EXAMPL_1     Example (dummy function module)
G_MOVE     Enter goods movements
REP_ORD     Create repair order/dep. follow-up func.
REP_VE     Record decision in repair order
SR_ECR     Create EngChangeReq./dep.follow-up func.
SR_ECR2     Create EngChangeReq./dep.follow-up func.
SR_PCRFL     Document flow for PCR
UD     Record usage decision
VL02     Change outbound delivery

Follow-up action in IW42

Hello.
I'm currently using a notification task (linked to a follow-up action) to generate a notification N3 from a notification N1.
It works perfectly in transaction IW22.
When I try to use the same task in IW42, the notification gets updated but no follow-up action is triggered....
Any idea?
Thanks,
Nicolas

Hi,
Copy the function module in customizing under Quality Inspection -> Follow up action and modify the standard functional module as per your requirement by the help of ABAPer and assign the same functional module to same IMG.
Regards,
Babu.S

Post serialized part from free to block stock with a follow up action

Hi,
I try to post a serialized part from free to block stock, but the standard function modules QMLR_FREE_TO_BLOCKED_STOCK, QMLR_FREE_TO_BLOCKED_STOCK_ST2 work good with not serialized parts, but it doesn't works with serialized one.
I create quality notification with serial number reference in RQM00-SERIALNR field, when I execute the follow-up function the M7175 error message appears.
Someone know a solution to this issue?
Thanks
Marianna

Hi The standard FM will not update the serial no for the material. So when you are doing the material movement through follow up action system can not move the material with out serial no. So you can change the functional module aith help of abaper to fetch the data from quality notification field.
Regards,
Smruti

Changing the status of Equipment in a follow up action

Hi All,
           I have a requirement in which a function module will be triggered for a particular Follow up action.
In this FM we have to determine the equipment and the Maintenance Order , if both are available , status of the equipment
should change to 'A' , status of maintenance - order = 'Technically completed' and Maintenance Notification = 'Notification Completed' .
How can this be done.? I am able to change the status of Maintenance order and notification but can anyone help me in
determining the equipment and changing its status to 'A'. ?
Thanks in advance.
Vasuki

Hi Gajesh,
                 The process is as follows :
1) During Calibration of a product,depending on the technician's User decision , 3 follow up actions are created.
2) Each follow up action has one FM associated with it, which is customised in      SPRO > Display IMG > Quality Management > Quality Inspection > Inspection Lot Completion > Define follow-Up Action .
3) In the first case ( first Follow up action when the inspection is successful) the first FM is triggered. In this FM we have to perform the following steps :
                               a) Determine the Maintenance Order and the equipment.
                               b) Incase both are available, status of equipmnt should be changed to 'A',
                                   Maintenance Order should be changed to 'Technically completed' and
                                   Maintenance Notification to 'Notification Completed' .
If you need further info pls let me know.
Thanks,
Vasuki

Send mail as follow-up action in reporting agent

I need to send a mail with the exceptions flaoting from a query. I tried to use the follow-up action of 'send mail' in the reporting agent. that didnt work because in our SAP we're not using the exchange connector and mails cannot be sent in the regular way.
I have an external command of sending mail.
Does anyone has a way of solving this problem, meaning, using my external command of sending mail in order to send the mail with the exceptions (this command works just fine in process chains, for example, for notification of process progress)
Thank You,
Yoav.

Hello Nili,
I think you can edit content and Subject etc.
http://help.sap.com/saphelp_nw2004s/helpdata/en/21/35783b82ee5d31e10000000a114084/content.htm
Hope this helps.
San.

How to disable only inactive firewall notification in the action center by GPO

Hi
I need to disable only inactive notifications firewall in the action center PCs through GPO.
I have seen several posts and it seems possible disable by GPO only all notifications in the action center and not only firewall notifications.
I have a DC with Win server 2012 R2.
Have you any ideas?
Regards
Christian

Hi Christian,
Sorry, it seems that we can’t achieve this.
Regarding this topic, the following thread can be referred to for more information.
Disabling Action Center's Firewall Notification through GPO
http://social.technet.microsoft.com/Forums/en-US/e78a30cb-6cf2-4de6-afda-e0c90a3d2e34/disabling-action-centers-firewall-notification-through-gpo?forum=winserverGP
Best regards,
Frank Shen

Follow-up action : please help - Inspection Lot related

Hi,
I am having the following trouble:
Through MB02, a printout is generated to the local printer (LOCL).
However, through QA11, when we save, we have a custom follow-up action attached that pops-up a
dialog screen.
The follow up action is triggered when a usage decision is changed for the inspection lot.
The follow-up action (configured in IMG) calls a Function Module and a screen, which in turn populates
a value into a custom DB table (based on the buttons, on the screen, sending either to LOCL or to a
zebra printer).
Now, what has to happen is that after inserting the value into a custom table, it should also open a sapscript and output.
The Sapscript and print program are there, with the print program being created 3-4 years ago by someone
else. However, even though we have code in the print program to update nast, in turn creating a message
for output (1st the custom DB table is checked to see if the values match, MATNRCHARG), It does not update
NAST. When we go through MB02, it does, but this should happen automatically after selecting one of the radio
buttons on the original pop-up & selecting print.
Please help. I don't know what to do and can't enable a debugger from the pop-up and if going though QA11,
I can't get it to stop inside the print program (only inside the custom FM).
Cheers,
John

hi
kindly check whether this FM will work for you QFOA_OBJECT_STATUS_SET
regards
thyagarajan

Follow up action

Dears
What is the follow up action in t code qs51
even in usage decision area we are seeing follow up
what is the use of that
Pls expain me with an example
Tahnks in advance
Faisal

In simple language Followup action nothing but certain action with be performed if predecessor activity performed.
Take example of UD.Against UD code you assign some followup atcions.Now when you select some UD code like "Rejected" ,then you can send mail/trigger mail automatically in the background to a mailbox stating the rejection of the material ,as a followup action.
I hope this add some value aprart from std definations...

Follow up action worklist

Hi,
What is follow up action work list and where do we define it?
Regards
Deepak

In simple language Followup action nothing but certain action with be performed if predecessor activity performed.
Take example of UD.Against UD code you assign some followup atcions.Now when you select some UD code like "Rejected" ,then you can send mail/trigger mail automatically in the background to a mailbox stating the rejection of the material ,as a followup action.
I hope this add some value aprart from std definations...

QM Notification Follow-up Actions

Similar Messages

Maybe you are looking for