QM: operation completion vs. closing inspection issue

Dear experts,
I have inspection plans with two operations, each representing a different lab that performs analysis independently. However, the UD is taken centrally when all results are confirmed and OK.
My issue is that I need that each lab "closes" the inspection after all results in their operation are entered and valuated. After the operation is finished, no modifications can be allowed.
So what I need is a mixture of two functionalities:
- Closing inspection actually changes the lot status preventing changes to results, but does not work at operation level, so I can't use it.
- Closing operation (enhanced function in ECC) works fine but is only informative: chars can be opened again, so I can't use it.
Any help on this, please?.

V_QAPO u2013 gives the relation of Inspection Lot, Inspection Plan and Operation. or there is another term called vorgflnr which is related to the operation.
most of the tables like qase qasr and qamr contain vorgflnr and inspection lot(prueflos).
Hope this answers your question.

Similar Messages

"Cannot perform operation, connection is closed" with Open MQ 4.4

I am using Sun MQ 4.4 with Glassfish 2.1.1 on Red Hat 5.7.
I am able to install glassfish cluster and all the instances are running fine. But, when I try to send a message to a topic, I get following exception
javax.jms.IllegalStateException: [C4062]: Cannot perform operation, connection is closed.
at com.sun.messaging.jmq.jmsclient.ConnectionImpl.checkConnectionState(ConnectionImpl.java:2468)
at com.sun.messaging.jmq.jmsclient.XAConnectionImpl.createSession(XAConnectionImpl.java:105)
at com.sun.messaging.jms.ra.ConnectionAdapter.createSession(ConnectionAdapter.java:383)
Following is part of the stateless EJB where I am creating the session.
@PostConstruct()
private void init() {
if (connectionFactory == null) {
if (log.isTraceEnabled()) log.trace("Connection factory not set. Retrieving from server context.");
InitialContext ic = new InitialContext();
connectionFactory = (ConnectionFactory) ic.lookup("jms/testConnectionFactory");
if (log.isTraceEnabled()) log.trace("Creating JMS connection.");
connection = connectionFactory.createConnection();
@WebMethod()
public void send(){
Session session = null;
session = connection.createSession(true, Session.SESSION_TRANSACTED);
I am trying to install these on a couple of new machines. Same application works on other machines so I am guessing this is a configuartion issue somewhere on these servers.
My question is what would be a good way to find the cause of this failure.
I have turned on log level to finest for ejb-container, jms, RA through glassfish Admin console, but no useful information.
Also, I don't have the name of the servers in DNS yet. I am using IP address for specifying instances.
Any suggestions ?
Thanks
Vineet

Hi Tom,
I used the demo/helloworld/helloworldmessage.java sample.
By the way, I should add that the broker log contains lines like:
[B1066] Closing [email protected]:2461 because "[B0061]: Client exited without closing connections"
Is this what one would expect for a connection.close() ?
It almost seems that this is happening only when the connection is nulled explicitly or the connection object is destroyed.
One last thing:
I was led down the garden path. The reason for the server being thread starved was that there were indeed connections not being closed/nulled.
Thanks in advance,
Patrice
Edited by: paubry04 on Sep 13, 2007 8:21 AM

Status 51 qty and/or delivery completed ind or final issue ind are missing

i am using we19 to test an inbound idoc mbgmcr02
i get status 51 qty and/or delivery completed ind or final issue ind are missing
i have the quantity filled in.
so i must need the delivery completed ind or final issue ind filled in.
i cannot find either or these???can anyone point me to them???
also on the e1BP2017_gm_code i am using 02.
can anyone give me a rundown on the valid codes to use here and what they mean

Hi Janice,
i saw your posting and we are also having the same issue and when i trie to open the link, it's not opening ' page not found'.
we are having an issue while moving the stock to vendor maintained stock.
The scenario is:
We have an externally processed operation in prod. ord and 2 of the components in the prod.ord are batch managed.( These components can have multiple batches) so when we released the prod.ord, P.Req and PO are getting created automatically. here we have two scenarios:
1. When we are maintaining single batch for the 2 components and release the prod.ord, every thing works fine i.e. stock is moving to vendor maintained stock i.e 541(o).
2. The problem is when we are maintaining multiple batches for the same components, the P.req and PO are getting created but stock is not moving to vendor maintained stock i.e 541(o)
when we debugged it's giving this message: " Qty and / or "delivery completed" ind. or final issue ind. are missing ".
Do i need to make any settings or am i making any mistake?
Plz guide me and it will be really helpful if anybody can give some steps to follow.
Thank you ,
kanth

Why "wait for operation complete" error ?

HI,
When I use the vi "Read multiple waveforms" there are an errors that appears in the VI "wait for operation complete" and I cannot found the cause of this error ! Can you bring me your help on this suject ?
Thanks you beforehand
Here my vi in LV2013
Attachments:
Sans titre 1.vi ‏17 KB

It would have helped if you would have stated that this was for a Tektronix 7000 series scope.
I see two possible issues here:
1) The scope never sees the trigger and therefore never sees a waveform to capture
2) The scope is setup to continuously capture waveforms. Since the scope isn't stopping, it won't report being complete.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions

Timeout error in Wait for Operation Complete VI for TEKDPO4054 scope driver

Hi,
I keep getting a timeout error (-1073807339) when I run the "wait for operation complete" sub-VI that comes with the tektronix DPO4000 series oscilloscope driver. I'm using a DPO4054 scope. The error out source is the VISA Read STB command, but I can't figure out what's wrong. Has anyone else encountered this error? Please help!
Thanks for your time!
I've attached the sub-VI where I'm having this problem.
Attachments:
tkdpo4k Wait for Operation Complete.vi ‏27 KB

duplicate post
Please try to keep your questions to a single board.

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2

My iPhone 3GS lost the signal operator completely after upgrading to iOS version 6.1.2, someone with the same problem? Just think when I enable the 3G, soon followed falls again.
I have already put another chip carrier and the same problem happens, my phone is factory unlocked.

Had same problem with iphone5 6.1.2 update. First tried reset network settings and didn work... Support recommend me a restore and ended up in recovery loop with iTunes error (-1)
Been at my carrier store (Optimus Portugal)... and iPhone sent to warranty. After 2 macbooks, 1 imac, 2 appletvs, 2 iphones, 1 ipod... I find disappointment with apple reliability....
At least the support guys at Optimus Portugal were very helpful and friendly, but I'll be 15 days without iPhone...
Regards
Joao

I just had 2 MacBook pro's stop working completely. No previous issues. Won't even turn on when plugged in.

I just had 2 MacBook pro's stop working completely. No previous issues. Won't even turn on when plugged in. Any ideas?

See if a SMC reset will breath life into them:
https://support.apple.com/en-us/HT201295
If not, make an appointment at an Apple store genius bar for a FREE evaluation. Warranty status is irrelevant.
Ciao.

Prevent a rs232 crash when "operation completed succesfully"

Dear all,
A certain test set-up should run for long times (months) and makes good use of RS232 comunication (over USB). Data rates are not high, but frequent, to four different devices.
Very occasionally the application crashes (in debug mode, running from CVI, not as stand-alone application).
It crashes in the ComWrtByte function, with error code -1, and CVI reports:
NON-FATAL RUN-TIME ERROR: "c:\FlexHeadControl\Relay_RLY08.c", line 105, col 9, thread id 0x00000ABC, function id 1: Library function error (return value == -1 [0xffffffff]). The operation completed successfully.
Well, if it completed succesfully anyway, why doesn't it continue to run?
I wonder if there is a way to handle this very occasional error, such that the application can continue (after some apropriate error handling) without manual interruption.
The program crashed on the first of the following two lines (which have been executed before hunderds of times):
ComWrtByte(device[iB], byte);
ComWrtByte(device[iB],13);
How does error handling work? Will it prevent crashes if I follow the error handling suggestions by CVI-help:
int ret = 0;
ComWrtByte(device[iB], byte);
ret = GetRS232Err();
if (ret<0)
//error handling (for example resending, or reconnecting)
Will running in normal mode (as a .exe) instead of debug mode, outside of CVI SDK work?
I ask this since the error occurs very infrequent but may still ruin an experiment of months...
Many thanks for any explanations, tips and programming examples!
Karel

First of all, a return value of -1 means "Unknown system error". The operation completed with errors, so it's good to have a warning. A negative value always indicates an error, as you can see in the help.
Dealing with the popup error message is wuite simple: go to Run >> Break On menu item and deselect "Library errors" item. With this, the popup message won't show any more, but you will need to add the proper error handling based on the return code from the function like you have already shown in your post.
Proud to use LW/CVI from 3.1 on.
My contributions to the Developer Zone Community
If I have helped you, why not giving me a kudos?

Error -1073807339 Hex 0xBFFF0015 Timeout expired before operation completed

Hi,
I am getting the Error -1073807339 Hex 0xBFFF0015 Timeout expired before operation completed message box but unlike many users that seemed to have a similar problem, it doesn't happened systematically... I am getting the message box error at random on a measurement and then it just works back fine, until the next time it happens again during a continuous measurement acquisiton.
I am working with a HP 34970A, plugged to the pc with a Agilent 82357A USB to GPIB and LabVIEW 2012 sp1. MAX is up to date, so is the I/0 Libraries of Keysight. Drivers are all installed and updated, Communication with IEEE 488 is enable in the I/0 Libraries, passport tullip also in NI VISA through MAX. I run a small VI that should make a continuous acquisition of four temperature using PT strobes plugged to the HP 34970A and graph them, also writting them on a Excel like document. The waiting time between two measurement is set at first by users. To take the measurment, I am runing an adaptated VI from the HP 34970A drivers. I think the problem comes from my VI's structures but I can't find it myself. I am also very surprised that it actually does work fine most of the time and just randomly crash in a loop...
I attached the VIs if needed.
I hope I was clear enough and that you might have an idea to help me fix this problem.
Thank you in advance.
Attachments:
Main_VI.vi ‏17 KB
Agilent 34970 Temp Scan.vi ‏36 KB

Is there someone here to help me?

Error 1073741824 , The operation completed successfully

Hello,
I have a C program that uses fwrite() to write to a binary file. I am getting this error code when I try to write to the file:
Error 1073741824
which as I have search " The operation completed successfully". What does this exactly mean and why is this an error??
I am running solaris 5.10.
with regards,
Ehsan
Edited by: user2135732 on Feb 14, 2012 9:22 AM

user2135732 wrote:
Hello,
I have a C program that uses fwrite() to write to a binary file. I am getting this error code when I try to write to the file:
Error 1073741824What exactly do you mean by "I am getting this error code"? For example:
Is it written to the output stream?
Is it logged on the system console?
Is it returned by some function call and you see it in the debugger?
Does your program print that message?

System.Exception Error text:The operation completed successfully

Hi
I have the this code :
try
oRpt1.PrintToPrinter(1, False, 0, 0)
Catch erros As CrystalDecisions.CrystalReports.Engine.InternalException
            WebConfig.Erro = "RPT: Engine: " & erros.Message
            Return False
        Catch erros2 As CrystalDecisions.CrystalReports.Engine.PrintException
            WebConfig.Erro = "RPT: Engine: " & erros2.Message
            Return False
        Catch erros4 As CrystalDecisions.CrystalReports.Engine.LogOnException
            WebConfig.Erro = "RPT: Engine: " & erros4.Message
            Return False
        Catch erros3 As CrystalReportsException
            WebConfig.Erro = "RPT: Engine: " & erros3.Message
            Return False
        Catch erros5 As CrystalDecisions.ReportSource.EnterpriseException
            WebConfig.Erro = "RPT: Engine: " & erros5.Message
            Return False
        Catch erros6 As CrystalDecisions.CrystalReports.Engine.OutOfLicenseException
            WebConfig.Erro = "RPT: Engine: " & erros6.Message
            Return False
        Catch erros7 As CrystalDecisions.CrystalReports.Engine.DataSourceException
            WebConfig.Erro = "RPT: Engine: " & erros7.Message
            Return False
        Catch erros8 As CrystalDecisions.CrystalReports.Engine.ExportException
            WebConfig.Erro = "RPT: Engine: " & erros8.Message
            Return False
        Catch erros9 As CrystalDecisions.CrystalReports.Engine.NoReportPartsException
            WebConfig.Erro = "RPT: Engine: " & erros9.Message
            Return False
        Catch erros10 As CrystalDecisions.CrystalReports.Engine.SubreportException
            WebConfig.Erro = "RPT: Engine: " & erros10.Message
            Return False
        Catch erros11 As CrystalDecisions.CrystalReports.Engine.FormulaException
            WebConfig.Erro = "RPT: Engine: " & erros11.Message
            Return False
        Catch erros12 As CrystalDecisions.CrystalReports.Engine.EngineException
            WebConfig.Erro = "RPT: Engine: " & erros12.Message
            Return False
            'Catch erros13 As CrystalDecisions.CrystalReports.Engine.ParameterFieldCurrentValueException
            '    WebConfig.Erro = "RPT: Engine: " & erros13.Message
            '    Return False
        Catch erros1 As System.Exception
            WebConfig.Erro = "RPT: Exception: " & erros1.Message & " " & Nome_Mapa & " " & NomeImpressora
            Return False
        End Try
And the code goes to Erros1 the the messege: -          erros1     {"The operation completed successfully"}     System.Exception
And doesnu2019t print on oRpt1.PrintToPrinter(1, False, 0, 0)
I working with visual studio 2008 (using framwork 2) and a I a impersonaction to print direct to the print, in a web page (ASPX).
This code works fine in visual studio 2005
Open the reports with:
Try
            oRpt1.Load(Nome_Mapa, OpenReportMethod.OpenReportByDefault)
        Catch ex As Exception
            WebConfig.Erro = "RPT ERRO carregar mapa: " & ex.Message & " " & Nome_Mapa & " " & Date.Now.ToString
            Return False
        End Try
I donu2019t recive any error in this try.
I donu2019t know what do moreu2026

I'd like to see a simple win app work on that system first. You can keep it really simple by running a saved data report, saving you the database logon code. So all you'd need to do is load the report, then .printtoprinter. If that works, I'd like you to try run one of our sample apps, see what it does. The samples are here:
https://smpdl.sap-ag.de/~sapidp/012002523100006252812008E/net_web_smpl.exe
You will get a number of samples, use vbnet_win_printtoprinter. (see how to configure the web app in the readme that comes with the app).
Ludek

ERR Driver Status: (Hex 0xBFFA2003) Max Time exceeded before operation completed. (TEK DPO2014)

Hi NI.
I'm trying to aquire signals from an Tektronix DPO2014 oscilloscope using Labview SignalExpress.
I have downloaded and installed the appropriate driver (at least I think )) : tkdpo2k using NI download station.
I run an ethernet connection and I do see the device in MAX, however im not quite sure if I have configured the IVI driver sessions correctly.
Anyway, when I open Signal Express, and select "IVI scope aquire" I can select my device under "resource descriptor" and the appropriate driver under "Instrument driver". I then turn on my Oscilloscope, tune in the machines tachogenerator, which is the signal the oscilloscope is to measure, and then select "autosetup" The sinosoidal waweform shows up on the oscilloscope and in SignalExpress, it is only done once. I then try and run the program and the error message accurs:
Timeout.
<ERR>Driver Status: (Hex 0xBFFA2003) Max Time exceeded before operation completed.
Is the problem regarding problems with triggertime or write/read problems with the TCP/IP connection?
What can I do to fix this problem?
Best Regards
Danny Joergensen
University of Aalborg Denmark
Attachments:
MAXscreenshot.png ‏265 KB
device.png ‏320 KB

How are you communicating? GPIB? Are you sure you have the correct address. Can you send an IDN command with MAX? Does MAX see the instrument?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Pourquoi une erreur s'affiche t-elle toujours dans le VI "wait for operation complete" ?

Bonjour,
J'ai un programme avec lequel je relève la courbe présente sur deux oscilloscopes et qui permet de surveiller l'état du trigger de ces appareils et d'enregistrer des fichiers de mesure. Cependant en utilisant le vi "Read multiple waveforms" il y a une erreur qui apparait dans le VI "wait for operation complete" et je n'arrive pas à trouver la cause de cette erreur ! Pouvez-vous m'apporter votre aide sur ce point ?
Cordialement
Ci joint mon vi LV2013
Pièces jointes :
Sans titre 1.vi ‏17 KB

Bonjour ttom972,
Je ne trouve pas de driver s'intitulant Tektronix 7000 series sur notre site. Avez vous un lien ?
Les drivers d'instruments disponible sur notre site ne sont pas développés ni supportés par NI. Je peux essayer de regarder d'ou provient l'erreur, mais le mieux serait de recoder en utilisant des fonctions bas niveau VISA.
Cordialement,
Benoit S. - Field Sales Engineer
Certified LabVIEW Developer
Certified TestStand Developer
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
Été de LabVIEW 2014
12 présentations en ligne, du 30 juin au 18 juillet

KE6485 Initialize.vi ERR Driver Status: (Hex 0xBFFF0015) Timeout expired before operation completed.

I am trying to get a reading from the KE6487, but I am receiving the following error.
"KE6485 Initialize.vi<ERR> Driver Status: (Hex 0xBFFF0015) Timeout expired before operation completed."
The driver I download for this device is KE6485, but is also compatible for KE6487. Therefore I think it should not be a problem.
I have attached the VI I'm using for your consideration.
Please advice, thank you for your time
Attachments:
Capture.PNG ‏5 KB
Capture 1.PNG ‏21 KB
KE6485_ZeroChk_LV6.vi ‏45 KB

How are you communicating? GPIB? Are you sure you have the correct address. Can you send an IDN command with MAX? Does MAX see the instrument?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

VISA: (Hex 0xBFFF001D) The specified attribute is not defined or supported by the referenced resource and VISA: (Hex 0xBFFF0015) Timeout expired before operation completed signal recovery

I am trying to control an HP 8350B sweep oscillator. I have an Agilent PCI-GPIB card installed on my computer and have set it up to run with labview. I installed NI VISA, followed by Agilent IO libraries and activated the Tulip passport in NI MAX.
I tried turning on the "enable agilent GPIB cards for 488 programs" in Agilent IO libraries and checking the VISA test panel for WRITE and READ, but I get the timeout error: (Hex 0xBFFF0015) Timeout expired before operation completed signal recovery
On moving to labview, when I configure the VISA Serial it gives me this error
Error -1073807331 occurred at Property Node (arg 2) in VISA Configure Serial Port (Instr).vi->8350_VISA.vi
and the possible reason is
VISA: (Hex 0xBFFF001D) The specified attribute is not defined or supported by the referenced resource.
Subsequently on removing the VISA Serial, I get errors in Write and Read with the possible reason being
VISA: (Hex 0xBFFF0015) Timeout expired before operation completed.
Help !!
Attachments:
HP-8350B_VISA.vi ‏16 KB

Moving to LabVIEW makes no sense if you get a timeout error in the VISA test panel and doing any sort of serial configuration makes even less sense. What query did you use with the test panel? Did you confirm it exists in the manual? Did you enable GPIB on the instrument?

QM: operation completion vs. closing inspection issue

Similar Messages

Maybe you are looking for