QM: Print giving in different language in different systems.

Hi Experts,
I have an issue with QM03 Print notification.
we had one notification type created for rejection report. For Russian plant it has to print in RU.
But in Development system the print is coming in English , when notification created in RU and EN Languages.
And print coming in RU in QualitySystem when created in EN and RU languages. How come this happening. Kindly Suggest.
Br,
Sandeep Chebathini

As you mentioned that its working QAS system but not in DEV system, please compare the settings given in previous reply. If both are different, do the changes as per QAS in DEV system & try. If both are same, will try for some other route.
Also check with your ABAP consultant & Basis consultant about this as Output device & related settings will be done at the client level or form level.
My doubt is, Form will be developed in DEV, will be tested in DEV & then will only be moved to QAS. How this form is working in QAS as per your requirement but not in SAP?? Else, Was the same form working in DEV as well before??

Similar Messages

Send print spool to different system

Dear Expert,
Due to user authorization constrain, I would like to generate a report from another system, and the report will be saved in another system.
Say,
System A execute RFC to system B to generate a report, ie. the report is executed in system B,
but the print spool of the report is in system A.
Is this possible ?
Edited by: Kokwei Wong on May 16, 2008 8:20 AM

Hi Kokwei,
Try using FM RFC_ABAP_INSTALL_AND_RUN.
Check the sample code in url,
http://books.google.co.in/books?id=6YU5-HqV5vIC&pg=PA347&lpg=PA347&dq=RFC_ABAP_INSTALL_AND_RUN+example&source=web&ots=8OjkobQjZF&sig=soHvxtD90vPmjqjL58dXwi9FXqI&hl=en#PPT380,M1
Hope this helps
Thanks
Lakshman

I installed Reader (in English) and it prints in a different language

I installed Reader [01/03/2010,in English] and it prints in a different language/garble.
I received a hospital appointment email with an attachment confirming my next day's appointment.
The attachment confirms place and time with a barcode to be scanned upon arrival at the hospital's kiosk.
So far all is good but, when I print the attachment it looks similar in format but is garbled.
It does not appear to be a translation to a foreign language but rather a series of random letters and symbols.
Examples:
Time: prints out as; Ujn f ; Provider:prints out as: Qspwjef s ; Location: prints out as: Mpdbyjo
09:00AM " " ; 1: ; 11BN Not only are the letters garbled but they are merged
I don't know what's wrong or how to fix it. My question is "What I Gotta Do?" HELP!

It "could" have something to do with improper embedding of the fonts used in the document. Reader is substituting for a different font which as you can see, rarely works.
One thing you can try is in the print menu find the option to "print as image" and see if that works.
If it doesn't, there isn't really anything you can do except to contact the folks that made the PDF and request that they embed all fonts.

Purchase order print priview and spool print output are different.

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview the TAX VALUES value is 120 coming..
when i am giving print with spool.. the amount value is showing TAX VALUE
is 443..why it is showing wrong..
this is for perticular output type.
why TAX VALUES are showing different in print view and
spool print.
help me.
regards,

Hi Neil,
thanks for your reply.
but the valiadtions are happening in standard functional module PRICING.
it is realted script(medruck)...but there is no code point for spool or printer side..
and the issue is realted one PO OUTPUT TYPE..
it is sap standard debugging... when i am debugging the functional module PRICING.
the values are coming dynammically.
help me.
regards,

Print priview and spool print output are different

Hi Friends,
there is problem with purchase order print priview and spool print output are different.
mean : in me23n .. for a perticular po .. in po priview one amount value is 120 coming..
when i am giving print with spool.. the amount value is showing
is 443..why it is showing wrong..
this is for perticular output type.
why perticular values are showing different in print view and
spool print.
regards,

make this setting change:
in SPAD > In the menu Settings -> Spool System
In the others tab check the first check box in the Output Controller block, SAVE and exit

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.

Multiple users logged into one server, each users printer has a different name, application needs ONE name to print to.
I'm NOT in any way a Terminal Services expert and I need help trying to get an application program working in a multi-user environment.
The issue is that the printer changes for every user that is logged in. The application needs to print NOT to the default printer, but to a "special" printer which is selected in the application... let's call it a label printer to simplify the explanation.
You have your default regular printer, easy for the application to find that one, and then you have a special printer that labels get printed onto. The application needs to know what printer is the label printer. So we allow the user to select that in the
application and the selection is stored in a config file in
C:\ProgramData\mfgr\prog\setting files
I don't have access to the application so I can't change how this works.
In the "regular" world, selecting the label printer driver to use should be per machine, NOT per user. When a new user logs into a machine, the physical printer doesn't go "poof" and a new printer suddenly appear. Same printer for all
users.
Yet in terminal services, the physical machine is "merged" with the virtual machine on the server. And there can be many users logged in at the same time. So each users real machine (and real printer) is injected into the "fake" terminal
services machine. The name of the printers is made unique for each user. So the printers DO go "poof" and change names depending on the user logged into terminal services.
So user "A" logs in and sets up the application to print to "LabelPrinterForUserA" (or whatever the name of the printer happens to be), that setting is stored in the ProgramData subfolder, and all is well. Later, user "B" logs
in, and when they print, the application tries to print to "LabelPrinterForUserA" which doesn't exist for user B or is only accessible by user A. If user B re-configures, that breaks it for user A.
SOLUTION 1: The way that /should/ work (in my mind) is that you define one "generic" printer in Terminal Services... call it "Virtual Label printer" and when the user wants to print to it, the print job gets re-directed back to whatever
physical printer is actually connected to their local workstation. There is a map of virtual printer to actual printer depending on the current user. The application is told once to print to "Virtual Label Printer" for all users.
SOLUTION 2: Or... there should be some way to make the ProgramData sub folders separate per user. E.g. when user "A" tries to access:
C:\ProgramData\mfgr\prog\setting files
they actually get
C:\UserData\UserA\AppData\mfgr\prog\setting files
and user "B" gets
C:\UserData\UserB\AppData\mfgr\prog\setting files
So the question I have is: Does either of those solutions exist hidden somewhere in the setup of terminal server? Or is there another way around this issue that I don't know?

I don't really have a "for sure" answer to this, but because people here can't seem to deal with a question that hasn't been answered I'll provide the best answer I did receive from ServerFault.com user Nathan:
I can feel your pain with using old software on terminal servers ...the solution I've come up with definitely won't scale as it requires some manual configuration, but I've gotten this method to work with our label printers (which require to be
printed to an LPT port...yep, that old).
Share your USB-connected printers to the network on each machine. Then, have the user log in on aunique session for each of them
(a TS account cannot be shared among computers for this to work) and install a network printer pointing to the USB one they shared. Try to use a DNS name to account for possible DHCP movements.
After, it should work. Each user can do this since display names can be identical as long as the ports are different (which they are).
This was clarified by the following series of comments:
I think you are on to something here, and I originally advised the admin to do this. The problem he ran into is that it setup the printer names in the TS as "printer on usersworkstation"
and he could not rename it except to change the "printer" to whatever. E.g. the "on userworkstation" remained. I believe there is another way of installing the printer which avoids this, but I can't find it. Ages ago, one used to do NET
USE LPT2 \\computer\printer password /USER:domain\user /PERSISTENT:YES and then tell the driver to print to LPT2 –  James
Newton Mar
17 at 16:21
@JamesNewton That's actually the exact method we used. The way around the "network printer" part is to install it as local printer and map it to a TCP/IP port that way. –  Nathan
C Mar
17 at 16:28
You mean in the case where the printers are TCP/IP connected and not local USB / LPT to the users workstation? That makes sense. Wonder if this will work for USB connected printers... –  James
NewtonMar
17 at 16:35
@JamesNewton You'd share the local printer on the client's PC then on the server connect via TCP/IP to it. You'd need static addresses or use DNS names if DHCP, though. –  Nathan
C Mar
17 at 16:51
Ah. Yes. I see. Looks like the LPT thing should work even with a USB connected printer:superuser.com/questions/182655/… –  James
Newton Mar
17 at 17:09

Purchase order print out is different

Hi Experts
When i preview the purchase order and print, it print correctly in one page but i have setup three copies in the layout but it prints only one copy. But when i print it directly it prints three copies but the font sizes are bigger and margins are also not the same as preview so it jumps into many pages.
How can i rectify this problem ???
Thanks & Regards
Kanishka Wickrama

Hi...
Yes i did that, but why the when i print in two different ways the font sizes and everything is different ?
Thanks & Regards
Kanishka Wickrama

Check Printing on two Different pages

Hi all,
Is it possible to print one page PLD on two Different pages. Actually my client wants to print one PLD on two different pages, he wants that one page print the acknowledgement letter and then vendor name, amount, date, amounts in words should be printed on the checks.
With Regards,
Pankaj Sharma.

Hi Pankaj Sharma,
Check Printing PLD is hard coded in the system. I don't think you have any easy solutions for this. If you tried already, you must know it already.
Thanks,
Gordon

I want to order prints from two different albums but don't want to pay shipping twice?

I want to order prints from two different albums but don't want to pay shipping twice- How do I do this?

Select all the photos in both albums and order - or make a temp album containing all photos you want to order prints of and select all and order
The easiest way is the second suggestion -- make a temp album containing all of the photos and select all
LN

Printing units with different decimals separator "in column"/ smartforms

Hi.
I want to print in SMARTFROMS different amounts under each other and the amounts are having different decimals places (depending on unit) - the printing should be, that the decimal separator is "in a column" and the units are in a "column"
E.g.
123,23 meters
10,00 meters
12,567 kg
67 PCE
should be printed as:
123,23__meters
10,00_meters
12,567kg
67____PCE
How can I do this?
Thanks a lot in advance

Hi,
Use a paragraph with tabstops. Define your tabs with align with decimal character.
That defining can be done in smartstyles. (tabstops are not alone in sapscript but also in smartforms)
Gr., Frank

Printing PO in the language of OA (ordering address)

Hello all,
In our POs we use partners VN (Vendor) and OA (Ordering address). The PO is printed with the address of OA, the output type NEU has the partner role OA .
Sometimes the language key in the vendor master data of OA is different from the language key in the vendor master data of VN.
When printing a PO the language is always the language from the vendor master data of VN. How to print with the language of OA? Is there any user-exit or some modifications have to be made?
In the PO, in the message NEU the language could be changed, e.g. from DE to EN. But the changed language is ignored and the PO is printed again in the language of the VN.
Thanks&regards

HI,
When you are entering the address of the vendor in the address view there is an icon named INTERNATIONAL VERSION where we can maintain another address in any language.
Why dont you maintain your Ordering Address there and call this address in your PO.
Oops i thought only address you wanted.. Sorry
If you want the total PO to be printed in OA address.
1. chec for language add on is installed
2. translate all the objects into ur OA language
3. *** Check the printer character format*** very important... ask the basis person as in my project also we have EN, TR, BG .. this would certainly solve ur problem.
4. You can change your lanuage to VN or OA language any time durning the creation of PO
Hope you got what I said.
Reward if useful
Thanks & Regards,
Kiran
Edited by: Kiran. V on May 1, 2008 4:32 AM

How to split a single file and then route it to different systems

Hi All,
I have a requirement like...my incoming file(single file) needs to be split into 3 files based on a field "company code".and then route it into different systems.
my incoming file is like this .....
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
I need to split this file and my ouput file should be like this
For 1st system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(100),....,.....,......
EOF.
For 2nd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(101),....,.....,......
EOF.
For 3rd system
Header,name,.....,.....,........,.....,.....
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
Detail,.....,.....,.....,.....,......,companycode(102),....,.....,......
EOF.
and then send it three systems based on company code.
Can anyone tell me how this can be achieved?
Thanks,
Hemanth.

Hi Nallam,
I tried the same thing but in the input file as there are different company codes,It is not splitting the file into three parts and sending only concerned data to repective system instead the whole file is going to the all the systems.
I came to know that the file has to splitted in the mapping only, we are able to do it by using mapping but the problem is in Routing,as in receiver determination we makes use of source structure for giving the condition. Can you please help me on this.
Thanks,
Hemanth.

ChaRM - possible to have 2 different system landscapes in one project?

Hi,
can anyone tell me if it is possible to have 2 different system landscapes in one project. One landscape for developing and testing the Change Requests and another one for developing and testing the Bugfixes.
Thanks,
Martin

As Rick, mentions, there's no default way.
Having said that, there's nothing stopping you from doing it yourself. You can add a kind of language selector to the layout and set that for every html5 output. With some JavaScript, you can have the user switch between your outputs. It would look like content categories, but you'll have build it yourself.

Compare pricing procedures in 2 different systems ??

Hi All,
I know with T-Code SE39, we can compare ABAP program in 2 different systems, Likewise is there any Transaction Code where I can compare pricing procedures in 2 different system. or compare 2 different pricing procedures in same box.
Thank you,
madhu

Dear Madhu
May be you can try with this.
Go to V/08, select your pricing procedure and execute. From top menu bar, click on Table View --> Save. Again from top menu bar click on Table View --> Print so that you can see the overview of that pricing procedure.
Now parallely you can open another screen, select another pricing procedure and do the same process as above.
thanks
G. Lakshmipathi

Adobe - inconsistent output on different systems

Hi,
I am converting my smartform output to PDF and this output I am displaying as PDF file in print preview. In some of the PCs, occasionally, the output does not appear in the print preview(Adobe Reader). A pop up box in adobe reader appears that does not have any text. The pdf file also does not have any output in it.
What can be a possible reason? This is inconsistent behaviour. Because the output displays correctly on other PCs or the same PC after a period of time for the same input.
The internal tables are being properly refreshed.
We are using ECC 6.0, Adobe version 9 and Windows Vista.
Regards,
Abdullah Ismail

the data processing is correct. I debugged the program on two different systems. The debugging results are always similar.
The pdf is displayed in a custom control container.
The following code returns code 0.
data: pdf_html_control type ref to cl_gui_html_viewer.
call method pdf_html_control->show_data
    exporting
      url = l_url
    exceptions
      others = 1.
if sy-subrc <> 0.
    raise cntl_error.
endif.
Thanks,
Abdullah
Edited by: Abdullah Ismail on Jul 22, 2009 5:12 PM

QM: Print giving in different language in different systems.

Similar Messages

Maybe you are looking for