QM - restrict lot creation in I. Type(08) for S Loc to S Loc transfer

Hi All,
Thanks in advance for reply.
We have requirement for restriction in creation of Inspection Lots using inspection type u2013 08, while stock transfer from storage location to storage location only.
Inspection type 08 is used for stock transfers thourghout various plants.
But in one of the plant, there is internal stock movement from one storage location to another. During this posting system is creating inspection lot(origin 08), which is not required.
Our location is WM and HUM managed.
Please let me know how can I restrict creation if Inspection lot in above case.
Best regards,
Ravi

Hi,
Actually we need QM activate for 311 movement type.
We have two scenario in same plant & same material.
1) Storage Location to storage location transfer(HUM managed location)
2) Plant to Plant transfer(without HUM managed location)
In material let say A, I have maintain insp type 08 & in insp type details i have activated isp with HU. Hence when I do the location to location tansfer,system is creating Inspection lot for 08 with handling unit.
But when I transfer the same material from one plant to other,system is not creating lot as this transfer is not with handling unit.
For this I have created one more insp type Z1 & attach to insp lot origin 08 but still insp lot is not created while plant to plant transfer.
Pls suggest.
Thanks,
Ritesh/Ravi.

Similar Messages

Creation of Wage Type Catalog for Luxembourg

Hello,
I am looking to create a wage type catalogue with T-Code OH11 to complete my Travel Management customization.
I launch the transaction, select Luxembourg as a country.
Then, I would like to copy the MJ30 wage type so I complete the fields and press copy (test run) but I have an error message indicating that the value does not exist in T512W..
What should I do to solve tis issue? Enter a value directly in the table? I have no idea ..
Thanks!!

Hello Remi,
I can't copy anything since there is not even one wage type in T512W for Luxembourg.
When I look at other countries, I saw the entries. But where do they come from?
In the example below are some of WT for Belgium.

Procedural steps of automaic Inspection lot creation.

Dear Gurus,
I would like to create Inspection lot automatically for various inspection types. Where I will customize the number ranges w.r.t specific inspection type (e.g. 01, 04, 05 etc.). Example: -
1. For Inspection Type 01 (GR inspection for incoming materials)- Lot Number is 1000000000.
2. For Inspection type 04 (GR inspection of finished goods)- Inspection lot number 4000000000.
3. For Inspection type 05 (Inspection for other good receipt)- Inspection lot number 5000000000.
Pl. needful.
Thanks in advance for all,
Prasun

If you are using SAP std insp type, then you need to build the following
- Material master with QM view - MM01
-Assign the ispection type 01, 04. 05 in QM view
-Create inspction charectristics - QS21
-Create inspction plan - QP01
The usage of inspection plan should be 5.
Check in the SPRO, is the usage for each insp type is 5 or other. If it is not same then you create insp plan as per teh usage assigned.
SPRO>QM>Quality inspection>Insp lot creation>Maintain insp type.
Once you do it, insp lot will be created duting Production GR/PO GR and other GR.
please come back if required.

Auto Inspection Lot Creation.

Dear Expert,
I have created new inspection type as Z01 by copying the 01 and I have maintain Inspection Lot Origins and Assign Inspection Types under 01. After that I have assigned my new inspection type Z01 to material master and activated it with material post to quality. Up to this it is working fine but after GRN system is not creating the lot. Even thou material is posting to the quality stock but no lot is in QA32.
But if I Create the lot wih QA01 it working fine and I'm able to do the UD also. But for no automatic lot generated for purchase order.
Please provide the details how to resolve this issue?
Thanks and Regards,
Manish

Dear Manish
These are the procudural steps when going to create a new inspection type
1) Maintain task list usage - SPRO> QM> Quality Planning > Inspection Planning> General> Define task list usages
2) Maintain inspection type - SPRO> QM> Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Maintain inspection types (for eg Z89) - Also maintain the task list usage here
3) Maintain Quality inspection lot origins and assign inspection types - SPRO> QM > Inspection Lot Processing > Inspection Lot Creation > Maintain inspection lot origins and assign inspection types
4) Define default values for inspection type - SPRO > QM> Quality Inspection > Inspection Lot Processing > Inspection Lot Creation > Define default values for inspection type
5) please check for any user exits in MIGO which have been used which is creating any issues.
Regards
gajesh

Inspection lot creation while partial comformation in 03 inspection type

Hi
I want inspection to be created while partial confirmation of operation in CO11N in 03 inspection.
It is happening with release of production order.
PLz let me know -if anybody can help.
Regards
Pooja

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection lot creation for inspection type 05

Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
Ram

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection Lot creation for the 103 movement type

<<Don't ask for or offer points>>
Dear Experts,
we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
Kindly let us know what settings need to be done in order to achieve the same.
Full points will be awarded for the reply
Regards.
Edited by: Matt on Sep 18, 2011 4:44 PM

Hi,
If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
This check box is available in the inspection type set up in the Material master.
Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
Regards
Hari

Inspection type 01 - inspection lot creation based on vendor batch number

Hi Guys,
this topic has been discussed several times here, but I was not able to find a suitable answer for my question.
I am facing the folowing requirement:
I have activated inspection type 01 for a raw material.
I am receiving a firs goods receipt from vendor A with vendor batch number 0001.
The system creates its own goods receipt batch number 0546 based on internal numbering.
A new inspection lot is created.
I am posting a second goods receipt from vendor a with vendor batch 0001.
The system creates a new batch number 0547 based on internal numbering.
A new inspection lot is created.
I do not want to get the second inspection lot, because I received vendor batch 0001 before and I am assuming it has been inspected or is in inspection.
Option 1: Post the second goods receipt against the first internal batch number created.
I am aware of this need at the moment, but a user is not always checking if there is an internal batch with the same vendor received before.
Can I customize the system to create inspection lots based on the fact that the vendor batch number was received before?
Or do I have to use an exit and some ABAP code to get the wanted result?
Thanks for your advice in advance.

You need to use one of the enhancements that Do-Wook has suggested. There is no standard SAP way to suppress the inspection based on the vendor batch number.
With the first enhancement you use the system to check for a previously received vendor batch and if one is found, then that batch number is proposed and not the next one from the numbering series. In this case, the lot isn't created than due to the inspection lot control of the inspection type.
With the second enhancement you check the vendor batch number and if it's been received you suppress the inspection lot creation and the stock goes right to unrestricted.
You'll probably need to do one or the other. Myself, I prefer the first enhancement.
Craig

QM _Inspection Lot Creation with Move ment type-542

Dear All,
The Business Scenario is when ever goods received from Sub contracting vendor with out any processing by 542 movement type the system should create the Inspection lot automatically.
How can achive this function?
Your inputs are valuable.
Regards,
Manis

IMG - Quality management - Quality Inspection - Inspection lot creation - Inspection for goods movements..
You have to add new entry for movement type 542..
complete help is available there..
Also you have to activate the related inspection type in QM view in material master.
You can try this in development server. (I am also not an expert in this area).
Regards,
Amol

Inspection lot creation logic related movement type

Dear QM Guru,
I'm newly for QM module
I would like to know how config of movement type and lot origin under below config relate to inspection lot creation.
Quality Management>Quality Inspection>Inspection for Goods Movements-->Movement Type/Update Control/Inspection Lot Origin
i try to delete all record of customized movement type 949 that i think it copy from movement type 501 in this customizing then try to GR with this movement type, so system still generate inspection as normal.
then i re-insert the movement back into this customizing again then i wonder that system automatic fill in lot origin for me and this field also gray that not changeable
how system know the appropriate lot origin for this customized movement type?
Please anyone explain to me.
Thank in advance
Konnapa

Hi,
Inspection lot origins are assigned to movement types in standart. The assignment is hardcoded and cannot be changed. In this customization step you can only see the origin assigned. When you copy movement types from standart the assigned inspection origin also gets copied, and you also cannot chenge this assignment.
What you can do is to activate inspection for each movement type, or to customize selection of the inspection type within the inspection origin assigned.
Regards.

Quality inspection lot creation during GR for STO

Dear Friends,
I have a Scenario for Quality inspection lot creation during GR with respect to STO
can use inspection type 01
or is there any other inspection type to create inspection lot during GR for STO
Thanks & Regards
Raj

Dear Friends,
when i maintain inspection type 08
Inspection lot is created in GR Plant
Thanks for that
but when i am moving the stock from Plant Sloc A to same plant Sloc B one more inspection lot is cretaed (movment type 311)
if i go to SPRO i can deactivate 311 movement type to avoid creating inspection lot
but it is client level , i need to restrict only for one plant
is there any other way to control just one inspection lot for one GR
if you are not clear with my writing pls do not hesitate to ask for more information
Thanks & Regards
Raj

Inspection lot creation

Dear Experts,
Reqiurement as follow :
We have four plant like 1000,1001,1002,1003,1004
System creates inspection lot when we do GRN against in stock transfer PO when STO from
1000 to 1004, 1001 to 1004, 1002 to 1004, 1003 to 1004, as we have activated inspection type 08,01 in MMR.
My requirement is system should not create inspection lot when STO from 1003 to 1004 only.
We can not deactivate inspection type as we need inspection lot when STO from other plant.
Please help in this scenario.

In QM, we can deactivate the quality for certain movement type.That means though QM is active in material master, if we are using any movement type for which QM is not active, it will not generate the inspection lot. For STO from plant 1003 to 1004, use the movement other 101 i.e copy of 101.
Copy 101 movement say as 901.Using following path deactivate QM for this new movement type 901.
SPRO - QM - Q. Insp - Insp lot creation - Insp for goods movement - Deactivate insp for movement type. Select the indicator "QM not active".
Now use movement type 901 for STO from plant 1003 to 1004.
Vishal Jonnalwar

Batch status at recurring insp lot creation

We have setu recurring insp 09 for few materials. We use "insp stock at creation" option. So system work as expected and create lot and put stock in QI, but still batch status remain "unrestricted". Our req is at the time of lot creation it self system should set batch status as "restricted". How to setup it?
When system setup "restricted" status for recurring batch? Help appreciated.

check option
Recurring Inspection: Block Batch at Lot Creation
Specifies, that a batch is blocked, when the inspection lot is created, if the inspection date lies within the opening period.
Use
If you choose this option, batches are blocked, if their next inspection date lies within the opening period:
If the batch status management is active in the corresponding plant, the batch status is changed to "restricted".
If the batch status management is not active in the corresponding plant, the batch stocks are transferred to the blocked stock.
If the batch status has changed or a transfer posting takes place, a new inspection lot is created for each storage location.
If a relevant inspection lot already exists and the next inspection date has already been reached, the change of the batch status or the transfer posting also takes place

Restricted automatic creation of PO in sales order

Hi Experts
When we create a sales order (VA01), we had customized the automatic creation of a Production order (CO01); but our client is asking us to limit this automatic creation to a certain characteristics of the material.
For example, we have to choose the colours (number and values), and for one colour, the production order donu2019t need to be created automatically.
Please can anyone help me to find any solution for this matter?
Thank you in advance
Hachim EL ALAMI

Dear Hachim,
if there is only one material for which you don't want production order to be created you can restrict that particular material by using material exclusion from Logistics screen - Sales and Distribution - Master Data - Products - Listing/Exclusion
and select condition type B001 for Exclusion and now if you try to enter this material in the sales order system will give you an error
OR
you can use listing condition type A001 in order to include only those materials for which you want production order to be created for them
Hope this will solve you purpose
Regards,
Sagar

Inspection lot creation during STO return

Hello Gurus,
is there a trick to trigger inspection lot creation during STO return ?
Scenario is the following:
1 - Creation of STO
2 - Supplying plant ships materials... stock in transit
3 - Receiving plant receives materials
4 - Materials with defects -> Receiving plant add new line with return tick on the same material
5 - GI from Receiving plant... stock in transit
6 - Supplying plant receives materials -> Inspection lot has to be created
I used inspection type 08 on Receiving plant w/o success.
Many thanks.
Stéphane

No inspection lot is created when we return Materials to Vendor (Plant A) even if we maintain Inspection type 02.
Before STO customizing, Plant B creates a subcontracting purchase order. Next Materials are sending to Vendor (Plant A) and put in "Stock provided to vendor" (Transaction ME2O).
Vendor (Plant B) creates a Repair request (Sales document / Transaction VA01). Next run VRRE to reveice Materials to repair. Inspection lot is automatically created. The usage decision triggers the creation of Service order to manage all the repairing flow. Last step is to deliver Materials to Plant A and create Repair invoice.
Repair request supports all repairing flow (inspection lot, service oder...), especialy status (out of warranty or not).
After STO customizing, I expected the following result:
1° - Return STO to Vendor (Plant A) / ME21N with return tick
2° - Plant B ships Materials / MIGO wih 101 (SAP converts in 161)
3° - Stock in Transit
4° - Materials receive to Vendor (Plant B) / VL10B
5° - Creation Inspection lot
6° - UD triggered Service order creation
7° - ...Repairing flow with Service order...
8° - Materials ship to Plant B
9° - Repair invoice
10° - Stock in Transit
11° - Plant B receives Materials
As I said, there are 2 blocking points:
- Inspection lot not created when Vendor receives Materials
- Service order not created automatically (because no Repair request to support inspection lot, service order...)
Thanks a lot for your help.
Tell me if you have any questions.
Stéphane

QM - restrict lot creation in I. Type(08) for S Loc to S Loc transfer

Similar Messages

Maybe you are looking for