QM-result recording after doing usage dcision and stock posting.

HI gurus,
My client is steel manufacturing industry.The requirement of client is that, after doing usage decision and stock posting they want to do result recording.Thy want it like this because in case of urgency they pass the material and afterward they do the result recording.Is such a scenario is possible in standard sap.If yes pls. provide me the solution.
Thanks in advance.

I wouls suggest you look at Jan's suggestion.  Setting everything as LT characteristics is
1) not a good quality practice
2) you would still have to manually to the UD I believe, auto UD won't work.  So if you have to manually process the lot anyway, you may as well just make the sotck posting and leave the lot open for results recording.
Craig

Similar Messages

  • Changing result Recorded after UD and Insp Stock posted.

    Hi,
    Is it possible to revoke or change the result recorded after UD is given and also stock posted for material.
    In inspection plan i have activated the  long term inspection check box for that particular MIC for which i want to change the results.
    I have done UD reversal, stock reversal etc.
    Then
    I hv tried through QE02 but its showing:
    Short term Inspection Completed.
    All Insp.Completed.
    UD has been Made.
    pls suggest the possible solution on this.
    Rgds,
    Yogesh

    Dear sujit,
    We have Ztcode developed for Stock posting reversal not for UD reversal.
    Just want to know inspite of checking box for Long term planning in MIC also in Inspection plan.
    Is there any provision for reentering results for already closed MICs.
    User has made wong input entry while recording results.
    Rgds,
    Yogesh

  • HT201210 I have tried to restore my i phone via itunes after doing the update and it keeps giving unknown error occurred (3194) please help

    I have tried to restore my i phone via  itunes after doing the update and it keeps giving unknown error occurred (3194) please help

    Hello Sam-marchesi,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694#error3194
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    Best of luck,
    Mario

  • TS3198 After doing the backup and restore how do you know if the phone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

    After doing the backup and restore how do you know if the iphone is unlocked if you do not get the message: "Unlock Complete. Congratulations, your iPhone has been unlocked. To set up and sync this iPhone, click Continue."

    If you don't get the message, your phone is NOT unlocked.

  • I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.

    I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.

    No, but if the answer was yes it's a little late to start getting freaked out about it.

  • Inspection lot summary after UD and stock posted

    lot summary level '2' had maintained in material record, when GR, lot summary work rightly.
    But after UD and stock post to unrestricted stock and new GR, no inspection lot generated and stock were posted to  unrestricted stock  directly.
    My question is ,why system does not generate new inspection lot?
    I also found it in document that , lot summart does not take place if "A previously created inspection lot has already been completely credited from the stock", is that means system will create new lot in this situation?
    Regards,
    Denis.

    Denis,
    After UD
            If the UD is accept, SAP will not create new inspection lot.
            If UD is reject SAP will create a new inspection lot.
    If UD is not made but 'Qty to be posted' is zero then also SAP will create new inspection lot for subsequent goods receipts.
    AKM

  • Stock tracking and stock posting

    Hello,
    In the Stock Management/stock transactions/Initial quantities, stock tracking and stock posting,
    Suppose the following context:
    Item stock: 1000
    Counted: 900 (posted in stock tracking)
    When reconciling in stock posting is raising this error:
    "Item price has not been entered"
    though we choosed Allow Inbound Posting without Price.
    This is only happening when the counted quantity is smaller than the item stock, that is, in the example given everything is OK for counted quantities >= 1000.
    SAPB1 Version 2007PL30
    We have try in 2005PL45, and it worked. So, we suppose this could be a bug. The strange thing is that it worked in a previous version!
    Do you know something about this behaviour?
    Thank you for your help,
    Regards,
    Vanessa

    Hi,
    Please refer to notes:
    1155329  Error: "item price has not been entered" in Stock Posting
    1173589   SAP Overview Note for SAP Business One 2007 A PL 37
    Hope this can be helpful
    Best Regards
    Helen Sun
    SAP Business One Forums Team

  • Prevent entering result recording after the production order closed.

    Hi QM Gurus,
    I want to prevent entering the result recording (we used inspection point) after the corresponding production order was closed.
    Please help.
    Cheers,
    Sun

    hi all,
    Enhancement QEEM0015 is only used for individual result, it can not be used for summerized result.
    Enhancement QEEM0011 is the right one for my case.
    It works before the system valuates the inspectoin characteristics' result for both individual and summerized result.
    Thanks all for your help.
    Regards,
    Sun

  • Single result recording valuation based on min and max  values

    hi,
      Our client requirement is as follows:
                               While entering the single results recording the system should not calculate the average , we need the system should valuate based on the  Minimum and  Maximum values in result entry. Is it possible?. can anyone explain in details.
    Regards,
    Ramu.

    Hi
    This is a standard SAP functionality available in SAP
    As
    Variable Inspection by S-Method
    If you set this indicator, you define the valuation mode for the variable inspection according to the s-method (ISO 3951).
    For a sampling procedure with this valuation mode, valuation occurs using a sampling plan consisting of sample size and k-factor. A quality score is calculated from the measured values of a sample and compared with the k-factor.
    Now you want  Both limits should come into picture while valuating then Check valuation Rule :31 -Variable insp. s-Method (two limits)
    so select the Valuation  mode  : 310- Variable insp. s-Method (two limits)   in sampling procedure.
    I hope this will add some value.
    Regars
    Sujit

  • Reset Usage Decision and reverse posting in tcode QA12

    Hi Friends,
    I have a requirement to reset usage decision by creating a customer funtion button in tcode QA12 and reverse the posting quantity from restricted area to to be posted area.
    I have implemented SAP Note# 175842.So now decision is getting reset but for reverse posting, i need to run RQEVAC50 program separately.But i need it in one go,like if user presses 'customer function' button, system should both reset the decision as well as reverse the posting quantity.
    Can anybody tell me how to do this...
    Many Thanks,
    Madhu

    I am not sure but I have tried the same thing combining is possible when you do not have any stock posting praposal for selected set of UD.
    What you have to do is make a separate program where implement aforesaid SAP note( as suggested in the note) and in the same program call for the screen to cancel the Usage decision(Read the user exit carefully)
    QEVA0008-->Usage decision: Customer function key (e.g. to cancel UD) you can create a routine to call the screen & make changes in the background.
    Seek help of Abaper !!

  • A/P invoice and stock posting

    Hi
    I have some issues with understanding the following:
    I have received some item without having issued a PO for them. For these items, master data exists .
    As common practice with a lot of suppliers, there is no Invoice attached to the shipping, only a delivery note.
    If I post the items to stock using 'Goods receipt' and use A/P invoice some days after when the invoice arrives, I have doubled the received quantity by posting the items to the stock twice.
    What is the solution to have the items posted to stock immediately for further usage and adding the A/P invoice later but without stock posting?
    Thanks
    Franz

    Hi Franz,
    When an AP Invoice is based on a Goods Receipt PO there will be no double posting, not for Warehouse quantites or in the accounting.
    An AP Invoice that is based on a Goods Receipt PO where nothing was changed between the Goods Receipt and the Invoice the AP Invoice will NOT post to stock. The stock posting was already done on the Goods Receipt.
    Most documents can be cancelled, either by basing a reverse documents or by cancelling. For every each one of them the quantities and accounts postings follow the logic of continuous stock.
    Goods Receipt PO -> Reversed by a Goods Return
    AP Invoice -> Reversed by an AP Credit Note.
    Please note that there are NO double entries anywhere when a document is based on another.
    I hope it helps.
    Jesper

  • BOM and stock posting

    Hi
    Client has several assembly BOM's. They also also defined as Sales items (not inventory or Purchase items).
    Whenever these items appear on an A/R invoice, you will also find that invoice no in the stock posting report with the exception of one BOM (CEDel). When this item (BOM) appears in an invoice, the invoice won't be on the stock posting list. There is no difference whatsoever in the various BOM's (assembly) and the item masters are also exactly similar. The problem started after the client updated the price for that item but we have been unable to find out if that had anything to do with it.
    I have logged a support call with SAP but maybe someone else has had a similar problem?
    Regards

    Hi
    The client is on 2007 PL 8.
    The BOM's all contain child items which are stock items.
    BOM 'BM40' contain the following:
    CEYA - Cement - stock item
    BAGPM - Bag empty premix - stock
    PIYA - Pit Sand - Stock Item
    BOM 'CEDel' contain:
    CEYA - Cement - Stock Item
    DELS - Delivery Charge - Sales Item
    When I do a stock posting report for 'CEYA' (Cement), invoices containing BM40 appear in the stock posting list but invoices containing CEDel are missing from the stock posting list.
    This problem only started from 1st June (unfortunately only discovered recently) after prices were updated.
    Regards

  • HP2000 issues after doing system REFRESH and everytime it does UPDATES

    Every time I have updates on my laptop HP 2000 bf69wm I have major issues.  It happened again today I did the updates and then I cannot access anything on the internet.  I get the spinning circle of death and no pages load.  I did a system REFRESH which states it will not affect your personal stuff.  Well great my pics are all intact however my Windows Office programs are GONE!!! I had to pay to put that on my computer and now they are gone!!!  I got this laptop as a Christmas gift from my parents because my Toshiba is falling apart literally it is duct taped together.  However the Toshiba still has less issues than this laptop does and it is brand new.  So now do I honestly have to pay for Windows office again.  It was a one time download so I cannot just download it again and I need it for my college classes.  It is awesome to have a brand new laptop that only works when it feels like it and gives me more stress than it helps.  Can someone please help me on what the deal is with this and also why I keep getting a message saying my usage is at 100%?  I can be in my email and it tells me I am running at too much  blah blah blah.  So what is the purpose of the laptop if I cannot use it?  If I had known it was this bad I would have returned it but too late now.  PLEASE HELP!?!?!?!?!?

    Hello xopixiegirlox,
    Please call in and speak to a representative. 
    If you live in the US, contact HP Here.
     If you are in another part of the world, start Here.
    Please let me know if the rep was able to take care of your issues. 
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • For the last half hour my phone only has an apple on it after doing the update and thats it. im not really sure what to do now

    I cant figure out how to fix my phone. Ive tried all the suggestions from other questions however all I get is a blank screen with a white apple. Its been that way for over 30 mins. I need some advice please.

    Is the battery drained after it shuts itself off?
    Did you already try to set it up as new device?
    How to back up your data and set up as a new device

  • Backflush Semifinished product and stock post to quality inspection stock

    Dear Experts,
    Please advise is it possible for the below in SAP. How to do?
    When backflush "Semifinished product", system automatically post to quality inspection stock. Then it is skip for 9 lots. The 11th lot again post to quality inspection stock.
    1st backflush posting -> post to quality inspection stock
    2nd until 10th backflush posting -> post to unrestricted stock (skip)
    11th backflush posting -> post to quality inspection stock
    Thanks.
    Regards,
    Wong

    Dear Experts,
    Let me further explain what I want.
    Production people produce semifinished product, but quality inspection people not inspect all the product. For example they will inspect 1st and 11th batch of product only.
    So I propose when backflush the semifinished product, system post the stock to quality inspection stock. Then production people know this batch of product need to be inspected and pass to quality inspection people. Once quality inspection people complete the inspection, they will release the material (UD) to unrestricted stock.
    I have no idea on how to configure and maybe it is not possible in SAP. Please advise.
    Question: Is it we should manually create inspection lot for each transaction (eg. backflush or material movement)?
    Thanks in advance.
    Regards,
    Wong

Maybe you are looking for