QM to Unrestricted Stock....
Hi
I have few stock in Quality Inspection (MMBE) which i want to move it to unrestricted stock & then scrap it
Can anyone tell me the relevant M Types?
Please revert
Rgds
I have no idea why QA07 was suggested to you. You should not need to use that.
From your postings it appears you have gotten an inspection lot of inspection type 01 created. Use the worklist QA32 to see if you can find the inspection lot.
Basically, since you have inspection types 01 activated in the material master, the system disallows the use of any regular inventory transactions (MIIGO,MB1C, etc..) from being used to move stock in or out of QI. You MUST utilize the stock posting capabilities of the UD to move material out of QI. You can can only movve material into QI via system events such as a GR of a purchase order, or GR from production, or using QA07 on batches exceeding inspection dates.
My guess is that your inspection lot is created, but has not been fully processed yet for some reason. It might not have an inspection plan assinged yet and be in a CRTD status. The results might not have been fully enterred, a UD might not have been made. Or any number of things.
So you must first find the inspection lot, then attempt to make the UD on it which you can do from the QA32 worklist. In the stock posting screen you can scrap the material right from the inspection lot. Beware.. this scrapping here means it is gone..off the books..out of here... You could post it to blocked stock too from here. Then follow your standard scrapping procedures.
Craig
Similar Messages
-
Report for material moved from blocked stock to unrestricted stock
Hi,
Is there a standard report in WM showing list and qty of materials moved from blocked stock to unrestricted stock.
Regards,
PratapIt would have been easy if there was a specific WM movement type for such transfer but due to the reason that the WM 309 is connected to various IM movement types, there is no direct report to get this information.
Conversely, you may use MB51 with the combination of the WM managed storage location and movement type for your purpose. If there are multiple storage locations assinged to the same warehouse then you may put a range in the selection criteria. -
Calculation of unrestricted stock on posting date
Hello,
In a certain report that we developed for our customer one of the data
Is "unrestricted stock on posting date".
Is there a function that calculate this data, and if not what is the best way to do it?
Thank you in advance,
Haim GimelfarbThank you,
But this is not the answer that I looked for.
Mb5b is a transaction, and I need a function that can Calculate unrestricted stock on posting date.
Becaus the stock in posting date is only part of the information in the report.
Thank you in advance
Haim Gimelfarb -
Posting Zero Value to Unrestricted Stock
Hi Gurus,
I'm having some trouble posting zero value materials to unrestricted stock. Is there any restrictions on doing this? if so, are there any work arounds?
I've tried marking an item in the PO as "free goods" but when I do the G/R, the items are not showing in stock.
Also, I seem to be having some problems with the material type classification UNBW.
Any help would be greatly appreciated.
ThanksHi
If you use UNBW material for free items PO, then it will ask for account assignment and once you do GR the stock will be posted to respective account.
You can not see the stock in unrestricted stock.
You can create the material of material type FERT with zero value and you can raise PO with free items checked.Once you receive the goods, Quantity will be updated in unrestricted stock and value will be zero.
Regards
Ramakrishna -
Goods Receipt of a material in Quality aswell as Unrestricted stock
Hi All,
When receiving material against PO from different vendors ,stock from few vendors should go into Quality stock whereas receipts from other vendors should be received into Unrestricted stock.
Please suggest how to achieve this.
RegardsHi,
Thanks for your replies but i had made the selections as per senthil's suggestions but still the Inspection lot is being created and the stock is posted into Quality.I am not sure which CTRL Key to select i have tried the underlined ones from below ..should i be selecting some other key and are there any more settings that need to be done.
0000 No active functions
0001 Vendor release (with Warning)
0002 Vendor release, tech. delivery terms
0003 Vend.release, tech.del.terms, QA agreem.
0004 Vend.rel,TechDelT.,QA agreement,certif.
0005 Vendor release, certificate
0006 Delivery release, documentation required
0007 Delivery release, invoice block
0051 Vendor release, certificate,Inv Block
0052 Vendor release, Inv Block
0053 Inv Block
0054 Vendor release, certificate, error mess
0055 Vendor release, certif, inv block, error
0056 Vendor release (with Error)
0057 Certificate,Inv Block (with Warning)
0058 PBB - VenRel/Cert + Sub Spec Mgmt
0059 PBB - VenRel/Cert + Packing/SMI
0060 certificate required
8888 Vendor block inactive
9999 All functions active with error message
Regards -
How to populate " UnRestricted Stock" key figure from 0IC_C03
Hello All,
There is requirement for us to show a field known as "unrestricted stock" from the info cube 0IC_C03. but there is no such key figure in that info cube. I searched all the forums and learnt that it must be calculated on fly while the report executes.
can any body help to identify / populate the "Un Restricted Stock" from the info cube 0IC_C03.
Thanks for all your timeHello Mr.Nagaraju vadlamani,
Thanks for your reply.
Can you please let me know how to get the following objects you mentioned to calculate the "unrestricted stock"
Projected Stock of today - ?
Demands with demand date today - ?
receipts with delivery date today - ?
Thanks, -
MRP ignore unrestricted stock with project stock
We are using Project Stock. When we generate reservations in Project Stock and run MRP, MRP ignors any unrestricted stock in the plant and always creates Purchase Reqs!
Our MRP settings for the Material Master seem correct (zero saftey stock, etc.).
We will want that, when the material is in unrestricted stock, MRP don't creates the Purchase Reqs for the material with reservation in Project stock.
is It possible ??
Thank's for you regards
SergheiSerghei,
Yes, that is exactly right.
When you create a requirement for project stock, the system will perform a net requirements calculation against project stock. If it finds no project stock, it will create a purreq for project stock.
Now, you have said that your business requirement is that you want MRP to do its work, and to consider unrestricted stock. The only way you can do this is by creating a reservation against unrestricted stock. Project stock is always considered in individual segments, apart from unrestricted. This is a 'feature' of project planning.
It is possible to create a project order, which contains reservations for components, which are valid against unrestricted stock. However, when you create project reservations manually, they will never consider unrestricted.
Exactly what is your business goal in this effort?
Rgds,
DB49 -
Table name reqd for batches and unrestricted stocks records
Hi friends,
I required table name of which having consolidated stocks with batch wise.
****reports avialable in T.Code:MMBE (here it displays the batches and unrestricted stocks by storage location wise)....
These details,i want to see in tables.
MCHA : will list only materials,plant and batche details.
MARD: will display Storage location data for material with total quantity.
LIke these, i want to view the table batches and unrestircted stock details of each material.
Pls, post ur comments and answer as much as possible.
Thanks & regards
sankar.Got answered from other forum
thanks -
How to issue parts from our Unrestricted stock to Vendor QI stock (Subcont)
Hi ,
In subcontrating process , I wanted to transfer material from my unrestricted stock to Vendor QI stock where subcontrator will test the quality of the material and only if it gets approved it will be used for process otherwise will be returned back to us.
For this I wanted to transfer my stock in QI stock of Subcontrator, how can I do that ?
Similary is there any way to Transfer material back from Subcontrator Blocked stock to my unrestricted / Blocked Stock.
Thx in Advance
Regards
Sandeep MarwhaBlocked stock at a subcontractor is not possible. The table containing the stock at a vendor is MSLB, and this table just does not have a field for blocked stock.
if you use batch management, then you can have restricted stock.
Edited by: Jürgen L. on May 6, 2008 4:04 PM -
How to post return stock to unrestricted stock for only Plant & Material Type combination?
Hello Everyone,
At present, whenever the stock is returned then it posted through 655 movement type. So, material is posted as quality stock.
Now, the requirement is to post the stock to unrestricted stock for Plant and Material type combination only. Which means, if the plant is 1413 and the material type is ERSA, VERP, and HIBE then for return sales order system post the stock directly to unrestricted stock, instead of quality stock.
So, is there any standard way of configuring the above scenario without going for validation (Z Fields)?
Regards
AnwarDear Mohammed ,
as per your scenario , there is two movement type has to trigger in the Delivery level according to the plant and material combination .
as per my knowledge it will not configurable in standard process . this will possible with user exit logic only .
follow the below logic to achieve your issue .
you have to create two item categories and two schedule lines with (655 &653) , that means your movement type has to trigger at sales order level only . write a logic in the user exit - MV45AFZZ -USEREXIT_MOVE_FIELD_TO_VBAP , if this combination matches then automatically item category has to over write other wise it will copy the existing item category .at delivery level you can see two movement types in item level.
wait for other experts solution , if any standard is possible or not .
Regards,
C.B Reddy. -
INterim storage bin to unrestricted stock movemnet
Dear All,
I have a problem in warehouse management
Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection .
Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to move the stock from quality to unrestricted stock
step 3 But the stock will not be going to the unrestricted area instead it is going to the intrim storage type 922 TR-Zone.
Step 4 If i see in the LS26 i am able to see the stock for put away as 65000 units and pick quantity as 65000 units and the stock type as quality
So the stock is still in quality, if i see the PO also it is showing that the stock is in quality
How can i move this out of the interim storage bin
I am pretty new to WM kindly advice me how to go about this ,
Regards,
D vasanthA PCN must have got created. Go to LU04, mtype 321, enter your material. It will display the PCN if any exists.
Select the PCN and create Transfer Order and confirm the TO -
On order stock to be transferred to Unrestricted stock
Some material was transferred from Plant X to Plant Y.
Now this material is lying in On order stock instead of Unrestricted stock
Kindly suggest how this On order stock can be transferred to Unrestricted stock
ThanksWe tried to post GR against PO (i.e, STO number)
also tried with outbound delivery document but cant do it.
Actually there were 3 line items in the STO, delivery and PGI was done for all the 3 line items now GR was also taken for all the three line items.
However when we checked the material document display, system posted 1st two line items with 101 mov type and the third line item was having mov type 605
now this item is sitting in on-order stock., I want to bring this to Unrestricted Stock.
Reversing and re-posting shall not be feasible.
Kindly revert, its urgent -
Movement type to use without refering a PO and move to Unrestricted stock?
Hi,
Can i make a goods receipt with out referring a purchase order, if so what movement type should I use to move the goods to unrestricted stock so that i can use it in sales order. Can any one suggest me?
Thanks
VijayHi
T-code MB1C
Movement type 561
Kapil -
Posting of QI stock into Unrestricted stock (URGENT)
Hi All,
At the moment, we are posting QI stock into Unrestricted stock using MB1B with Mvt type 321. But the problem is we have to enter each material & qty manually, i,e, if a PO has 10 lines, i have to manually enter each material in the PO & then the qty. Is there any other transaction or way in which i can do this transfer posting with reference to the PO, thereby the system automatically puts the lines in that PO & i can then delete the material or modify the qty if it has not passed QI check.
I tried in MB1B with Mvt 321 by creating with reference to PO, the system prompts an error & says not possible.
Hope my problem is clear, await inputs.
VivekHi Aasif,
As mentioned by you i have done the settings.
1. If i enter the mvt. type 321 in MB1B & then click on create w/ ref to PO, i still get an error.
2. But if i just enter the mvt 321 & enter inside MB1B, there i now see a field called Purchase order. But if i enter the purchase oder number here, the materials inside this PO are not automatically displayed, the screen just becomes grey.
What i actually want is, when i enter the PO number, the materials should be displayed, which would resolve my issue.
Await your inputs.
Vivek -
Bapi to move Quality inspection stock to unrestricted stock
Hi All,
I am developing a report where the material batches should be distributed to other storage locations within a plant (as we do it in MB1B with movement type 311).But if that material is in QI stock( inspection lots) then that should be forcibly moved to unrestricted stock.Is there any BAPI available to mimick QA11 and force the material from QI stock to unrestricted stock.
Thanks in advance,
PramodHi Peter,
The requirement is to mimick the transaction QA11.I am all ready using the BAPI_GOODSMVT_CREATE to post the goods from unrestricted stock.But,to move the stock under QI inspection I have to first move it to unrestricted stock and then post it.Is there any other BAPI available for mimicking the transaction QA11.
Thanks,
Pramod.
Maybe you are looking for
-
Certificate error when try to send mail
Masters, First of all sorry for my poor english. Im not IT specialist, so please ... I need help to fix my problem. I know there are many post with this but i can't figure out. We had a working enviroment with no certificate issue. I tried to set the
-
How to hide or change the design in oaf
1. we want to hide the oracle default logo and display the department logo based on the payroll attached to the employee. 2. how can we give a link on a custom oaf page this link must direct the end user to absence sshr screen...how can we do it? you
-
After atempting to update to iTunes 11.something (.3 or .4 which I had been avoiding because of past experiences) I get this message when I try & open iTuunes. ITunes was not installed correctly please reinstall iTunes. Error 7 (Windows error 193).
-
Issue in executing contains Query(Oracle 11g Enterprise E on Linux RHEL 4
Oracle Version: 11.1.0.6.0 We are facing problem in executing contains Query : 1.When length of string inside contains clause goes beyond 4000 it gives error ORA-01704: string literal too long 2.We try to modify query by breaking it into multiple con
-
Adjusting the duration of a photo(s) in iMovie
iMovie help says I can adjust the duration of a photo by double-clicking it and changing the number of seconds to display the photo. I do that, as well as click on "Applies to all stills." When I click <Done>, however, the duration doesn't change for