'QM value transferring through process messages'
Hi,
What exactly 'QM value transferring through process messages' means ?
Regards,
Samir
Hi wadajkar ,
When you are using the PI sheets for the Process mangaement Functionality. Some Of QM realated values can be tranfered through the Process messages. e.g . when process order is confirmed , inspection lot can be sent through the process messages. Some of the below QM related can be processed through process messages
inspection char
inspection lot
inspection result
inspection short text
Thanks,
Rajanikanth
Similar Messages
-
HR Report for viewing data transferred through CO1P transaction
Hi,
I have query here about HR data transfer which we do through CO1P transaction. How we can view these data transferred through CO1P in HR module i.e. any transaction or report is available from HR side which can give fair idea values which are passed through PP are visible in HR report / table.
Your precious reply in this matter will be highly appreciated.
Thanks in advance.
Regards,
Tejas PujaraHi Friends,
I gone through EVHR and another table LSHR as well which is saving entries confirmation timings i.e. time events and time tickets. But to my surprise, respective time fields entries are shown with 0 values in both tables. I cross checked with AUFNR that AFRU entries contain values for standard values i.e. set up , machine etc confirmed properly and updated in AFRU.
But same AUFNR values transferred through CO1P are not updated with those values in HR tables.
Any body can through light on this,
Alternately, let me know in case I need to post this in HCM forum. Kindly suggest me exact where I need to post this since I found so many sub-categories under HCM section of SCN.
Thanks & Regards,
Tejas Pujara -
Population o batch manufacturing date automatically through process mesages
Hi gurus,
We sre using control recipe to download data into MES system and uploading data through process message to do the confirmation and goods receipt. We are using batch management and calculating shelf life expiration date at the time of confirmation using manufaturing date + shelf life. Now the issue is, through process message we are not able to populate batch manufacturing date automatically and getting confirmation error after sending the process message to SAP. In process messgae category we are using characterics PPPI_END_DATE,PPPI_EVENT_DATE, PPPI_START_DATE as a date field.
Can anybody suggest how can we populate batch manufacturing date automatically through process mesages.
With thanks
Rajib Pathakthanks
-
How to creat Process messages automatically through PI sheet saved?
How to creat Process messages automatically through PI sheet to the Process message destinations.
Hi Jessie,
When you process instruction category PROD_3 in master recipe, the process message PI_PROD is created.
After releasing process order, you have to create control recipe. Upon successful creation of control recipe, process instructions will get generated. Check the error log for control recipe creation for error if any.
Note that control recipe will be generated only with order status "Released".
You have to sent this control recipe to process control (CO53).
Hope it is helpful.
Regards,
Sachin -
Exception processing message on K230
I just got an IdeaCentre K230 (running Vista) and transferred my files from my old computer to the new one using LapLink. Now the new computer has been crashing, and I keep getting the following message:
Windows--no disk
Exception Processing Message
0xc000013 Parameters 0x00007FEFD577240, 0x000000000000004,
0x00007FEFD577240
How can I fix this and, hopefully, stop the crashes? Thanks.Go through these two links
http://social.answers.microsoft.com/Forums/en-US/vistarepair/thread/b40b36b8-6983-4844-9519-05c58411...
http://social.answers.microsoft.com/Forums/en-US/vistaperformance/thread/aec213ac-accd-4347-9b76-853...
Can you open your computer in the safe mode?
Cheers and regards,
• » νιנαソѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo -
Confirmation of by-product via process message
Hi All,
what are the parameters - characteristic values that needs to be passed for confirmation of the by product via process message ?
Regards,
PSSHi,
531 Goods receipt from by-product from the order
The goods receipt of a by-product usually refers to an order, but it can be entered without a reference.
If a component is entered with a negative quantity in the order, a reservation item is created with
531 (instead of 261 ). The receipt of a by-product can be entered when the component for the order is withdrawn from stock or it can be entered as an 'other goods receipt'.
Possible special stock indicators:
E, Q
Thnaks,
Vinodh -
Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek -
Error while processing message payload Element 'CategoryCode&#39
Hi Experts,
I am trying to integrate SAP ECC with TM. I have transferred the sales order from ECC to TM, but its not triggering order based transportation requirement (OTR) instead giving an error Error while processing message payload Element 'CategoryCode' and all the xml messages are stuck in inbound queue. The screen shot of the issue is as appended herewith. Please advise.
Thanks & Regards,
Aunkur DeHi Aunkur,
The issue will generally come when a mandatory field in XML which you are not sending either or missed.
Please check if all mandatory fields are mapped properly.
Best regards,
Rohit -
Error while processing message
I have WS2RFC interface that use to work. I recieve in the RWB this error message from the RFC Reciever.
10/6/08 1:20:10 PM aa98b6f0-9398-11dd-94cf-0017a43cc516 Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.
any ideas?
KfirIn RFC channel increase the maximum connections paramter value to 5. Save and activate.
Thanks,
Gujjeti -
Dear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S EDear Guru's,
I am not able to solve the above issue for last couple of days.
I am newbie to the webservice
My Issue...
I am using Jdeveloper 11.1.2.4.0 Release 2
1. Using Jdev I built one small Web Service with two methods.
While testing the Webservice...
I passed User Id as Parameter and it successfully return the values (user id, user name and description) from fnd_user table
2. I created another application to consume the web service i created.
1. I added the webservice SOAP and added the method.
2. Created a jsf page and drag and drop the parameter and return values to the jsf page.
3. While executing the created jsf page I received the error message as below
"oracle.jbo.NoDefException: JBO-29114 ADFContext is not setup to process messages for this exception. Use the exception stack trace and error code to investigate the root cause of this exception. Root cause error code is JBO-25058. Error message parameters are {0=Attribute, 1=UserName, 2=UserName}"
Even I know that this issue is repeated one in our forum, I was not able to solve this issue.
Can anybody help to solve this issue.
Thanks and Regards,
Durai S E -
PP-PI - Process message processing and batch management in PI_CONS message
Hi All,
Hope you can help me to find the better solution... I will try to explain my scenario
Scenario: to control the production run PP-PI module is in use. Process order are created in SAP system and then transferred to the process control system where the execution of the process order is controlled On-line. Once per month the confirmations are transferred from this control system to SAP. In the Process control system batch are not managed. For good issue posting standard process message PI_CONS is used.
Now we have the situation that some raw materials used for process order processing are managed with batch. During the process order creation the batch related with this raw materials can be determined, only during the month when the raw material is entered in the plant is where the batch is determined. At the end of the month the batch of this materials is available in the SAP system (not in the process control system). Due to behavior of PI_CONS regarding batch if this characteristic is not informed in the process message or in the reservation an issue is trigger.My doubts are:
1.- If I need inform the batch during this confirmation ,an even split the quantities in the process message according the batch availability, I'm force to use a custom process message or there is other workaround? (remember is not feasible send the batch to the process control system)
2.- probably i miss something because I'm can't debug the execution of the process message. How can I debug the execution of a manually created process message?
Sorry for the long explanation I try to explain my scenario as better as possible.
Thanks in advance for your valuable inputs.Thanks for your replay.
No really I don't like to make the batch mandatory, during the good issue is not feasible inform the batch due to it is not managed in the Process Control System. Due to the behavior of PI_CONS if for batch managed materials the batch is not informed in the message or in the reservation an error is trigger. In the reservation snot feasible inform the batch because in that moment is unknown.
My question is if it is feasible some how have like FIFO batch determination when the process message is processed without creating a custom message.
Thanks in advance -
How to keep waiting time between processed messages !!
Hi Folks,
I have got one scenario required waiting time between processed messages. The problem as follows !!
File --> Proxy scenario. I receive 15 messages from sender side (same messages structure) so working with one interfaces. File picking and transforming this message and split into 2 messages. messages are receiving to receiver. I am using BPM with 7,8 steps like receiving step, block , message transformation step , internal block 1 for sender 1, internal block 2 for sender 2.
All things are working fine, messages are going to receiver properly. But customer requirement is , wait step required between processed messages before sender1. I have put wait step still, PI picks all messages in one shot processing and waiting for 2 minutes, after 2 minutes sending all messages at the same time, this process is not working.
I have tried with wait step in mapping (Sarvesh) given excellent idea, still PI works the same way.
Can someone please explain a bit why the messages or not waiting message by message. I am using EOIO with Queue name and file process mode "BY NAME" and I have tried "BY TIME" as well. I have given priority to this Queue. On BPM Queue assignment : One Queue.
Please I am expecting positive answer !!
Many Thanks in Advance
SanHi Rudolf Yaskorski ,
Not sure about your PI release and BPM model, do you create separate process instance for each file, or do you process files collecting them in one single instance? Are you using parallelization within your ccBPM ?
I am using serialization, I don't think bpm can do Parallization until PI 7.0, but PI 7.11 has got has queue assignment. But I am using one queue. This must be serialization.
To me it looks like your issue is not in ccBPM but rather more in polling files (as per your post file CC polls all 15 files in one shot). So if you wish to poll the files not at the same time some workaround is required. Possible options you could check out:
A. Either implement "wait" in your mapping based on file name or other criteria (e.g. directory name). Check out if respective BPM instances are really created at different times.
I have used wait step in mapping. These 15 messages has to go through one interface. So I am using one interface. But I have checked mapping process time in all messages on receiver system. Shows same timing, even though I put 40000 ms waiting time in mapping.
B. Try polling different files (or use different directories) with different channels and coordinate starting / stopping of your channels by scheduling availability for each CC in RWB. E.g. you poll file 1 with CC 1. You start 2 minutes later CC 2 and poll file 2. And so on.
I am not clear about this . On BPM waiting step is working and it keeps wait all messages, which are coming through one interface. Then it releases all messages at the same time.
I don't know how to resolve this. I have tried with Transport acknowledgment, but all messages are going to reciver system waiting at receiver system in priority queue and processing in EOIO, but taking so long. Rather all messages go and sits in queue, I want to stop messages by message with 2 minutes time gap. How please?
Kind Regards
San -
Value Mapping through Tables in R/3 from XI
Hi All,
I'm new to XI and got a scenario as "Value Mapping through Tables in R/3 from XI". Kindly do tell me the steps which I should follow to complete this scenario. I'm from ABAP so table creation is known to me, what next should I do after table creation?
Thanks in Advance to all of you,
Sreedharsree,
value mapping are done using message mapping. In message mapping you have to make a RFC call to query the db and get the response. were you have to write a java function in mapping program.
check this blog, it speaks on value mapping
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i -
How to create a positve pay file for ACH and Wire transfers through F110
Hi All,
I need to create a positive pay file for ACH and Wire transfers to the bank for auto clearing. For checks we have a standard program (RFCHKE00) to create the positive pay file which creates the output lists after the F110 payment process. Is there any standard SAP program available which creates the Positive pay file (Output list) for ACH and wire transfers through F110.
Thanks
SridharPlease let your abaper create a 'Z' program using RFCHKE00. For example 'ZRFCHKE00' and use it in the same way as you currently use RFCHKE00 for checks.
After the program is created, use SE38 and save it as a variant using your own specifications. Thereafter, in F110, when carrying out a payment run, under 'Printout/data medium', enter the program name under "Lists" with the variant. Then click on 'Maintain Variants' and make the necessay specifications there as well.
Instruct your end-users to enter this program when running ACH and wire transactions through F110.
Please let us know if this information was helpful.
Thanks,
Elias -
Hi All,
Can you please suggest to choose the best ways (for best performance) in MII (12.2 on NW 7.3), to process the incoming process messages from shop floor systems to SAP ECC 6.0 and vice versa?
ThanksHi Surya,
Best practices for flow of data from ECC --> SAP MII --> Shop floor & Vice verse:
1. Send ECC data through IDOC's/RFC's as messages to SAP MII message listener and BSL transaction process data and update directly on shop floor database as if you configured in Data services or later send those data by web service to shop floor system (i.e. depends on Shop floor machines).
From Shop floor:
shop floor --> SAP MII --> ECC
1. Use either Web service or fetch data from DB and pass data to BAPI's for sending to ECC through BLS transaction.
Regards,
Praveen Reddy
Maybe you are looking for
-
Small, cheap NAS box that supports nfs/rsync/ssh ?
Hi all, for my personal backup needs, I'm looking for a standalone NAS box ("networked hard disk/raid solution"). I need to have support for at least one of rsync/nfs/ssh. (smb/ftp is not enough for me) It shouldn't be too big (eg not the size of a
-
Does anyone know how to re-arrange the variables in a Report Painter Report? My selection screen shows- Enter Year 2: Enter Year 1: I want it to say - Enter Year 1: Enter Year 2: Thanks in advance for your reply! Renee
-
Hi Gurus, Can any one explain me about generic extraction like, 1) when we go for Generic extraction 2) what is the business scenario 3) generic delta Please explain me with step by step by choosing some data fields as example for this. One request,
-
PLESE HELP ME.....THANK YOU
My name is RJ, I have a new issue now, is about my marketing class.. I need to create a HEAD LETTER AND A LOGO for my presentation on this friday but I dont know what software can I use to make this.... Would you help me.. I'm using a powerbook g4 Ve
-
Getting error when I request for an XSQL page
Hi, I have loaded XDK 9.0.2.0.0 on Oracle 9i J2EE Container (oc4j). Whenever I request for a XSQL page, I get the following error, Oracle XSQL Servlet Page Processor 9.0.2.0.0 (Production) XSQL-017: Unexpected Error Occurred java.lang.NoClassDefFound