QM02 long text without log

Hi All,
I was trying to get the Notification long text from QM02 transaction into my script.So,the client requirement was not to get the auto generated lof text.I have tried if it is stored in any table but could not find it.If I write the include statement with all the parameters,I am getting the log also displayed in the output.Please suggest me what to do? URGENT..........
Regards,
Akanksha

Hi,
I'd like to know if this works in other application areas i.e. SD, CO or PM?
I think this is more a basis issue that application specific.
The Long text of notifications was designed for text only! Why do you believe that a table can be displayed?
I cannot imagine that there is a solution for your question.
Regards
Isabelle

Similar Messages

  • Maintain Batch long text - change log

    Hi,
    Any pointers as to how to maintain Change log for long texts.
    kiki

    Tolga,
    I don't know what method member Kiki decided upon, but if it were me, I would be inclined to use the Auditing feature of ERP to keep, display, and manage Long text change logs.
    http://help.sap.com/saphelp_erp60/helpdata/en/12/a5653ade969f4de10000000a114084/frameset.htm
    Best Regards,
    DB49

  • QM02 Long Text Linux Open Office

    Dear Team,
    In QM02 Quality Notification , in comment entry , long texts we are unable to paste table formats from other applications like spread sheet, docs. etc.
    Can we able to change the formats?
    Thanks.
    Param

    Hi,
    I'd like to know if this works in other application areas i.e. SD, CO or PM?
    I think this is more a basis issue that application specific.
    The Long text of notifications was designed for text only! Why do you believe that a table can be displayed?
    I cannot imagine that there is a solution for your question.
    Regards
    Isabelle

  • Printing long text from material master in from MM07ET

    Hello,
    I'm using WEE1 output condition to print labels for gr. I'm using the standard object MM07ET and I need to include in the label the long text from material master - table STXL. I know that there is a function READ-TEXT in ABAP for this but I don't have access to abap development. I need to know if it's possible to include a command in the sap scrip to retrive the long text without modifing the program SAPM07DR.
    Thank you!

    Hi,
    Sorry for the late Reply, Please use the following code in SAPSCRIPT
    /: INCLUDE &EKPO-EMATN& OBJECT MATERIAL IDGRUN LANGUAGE EN
    &EKPO-EMATN&  material Number ( Here please maintain the Field value which is used to print Material Number )
    MATERIAL is the Object Name
    GRUN Is Text ID
    EN Language
    You can use the above code for priting long text in the SAPSCRIPT FORM. to find the object name and ID please follow the below Steps
    Go to the window were you have maintained Long text... Double click on the text, then it will open a new window.. there Click on the top Goto-->Header.. here you will find the relevant data as follows:
    Language: EN
    Text ID : GRUN
    Text Object: MATERIAL
    Name: Material Code
    Regards
    GK.

  • Problem in viewing long text in QP03

    Hi
        Facing a strange problem while trying to upload long text in QP01 using SAVE_TEXT.
    the long text is getting uploaded properly
    an entry is inserted in STXH with object, id, name, etc.
    but when i try to view the long text in QP03 txn. (Display), there is no icon for view long text
    when i go back to QP02 in change mode, the icon for long text (Create long text without horizontal lines embedded on it) exists, after clicking it am able to see the long text and if i am saving the plan while leaving the txn, then again if i see the same plan in display mode (QP03), i am able to see the long text icon and the long text by clicking it..if and only if i view manually every long text in QP02 and save while coming out the txn., I am able to see the long text icon and the long text in QP03.
    Is it any setting problem or where am i wrong?
    Sathish. R

    hi
       r u sure? bcoz the program was running fine with long text viewable in QP03 all this time
    Sathish. R
    Message was edited by:
            Sathish

  • Long text at inspection completion.

    Hi everyone.
    I have following scenario:
    1.- Quality certificate should get variable data when it is printing. User needs to choice from a list, what he will print for certificates, that must be done at Usage decision.
    2.- I think using UD long text at the time to save UD can solve my issue.
    3.- I just can get automatically UD long text when I force inspection completion.
    How can I get automatically UD long text without force inspection completion????
    Regards.

    Hi everyone..
    I think I wasn't clear in my initial request....this is regarding long text for UD....
    Since you force inspection completion in UD (QA11), and save your UD, system automatically show you other screen "Change long text on usage decision", and you can enter any text.
    But that only  happend when you force inspection completion....when you don't force inspection completion, long text can't be updated....
    I need that screen "Change long text on usage decision" appear every time, with or wihout forcing inspection completion...
    I'll really appreciate your support.
    Best Regards.
    Juan.

  • Database Table where modifications to message long text are stored (log)

    Hi,
    As per manual correction mentioned in SAP note 1144291,
    we have changed the long text for message XC092 by modification of the long text.
    This note 1144291 is a pre-requisite for SAP Note 1310808.
    After the notes were implemented, it is noticed that message CURTO1055 has incorrect information in its long text. This is because, the variable in the long text are not correctly defined in the long text.
    Both the messages XC-092 and CURTO1-055 are SAP standard.
    The error for CURTO1-055 can be rectified by modification of the long text and maintenance of the correct variables.
    However, my question is:
    Where do we check the log for document modifcation for a message long text.
    I have found the logs relevant to my modification in table DOKHL and DOKIL.
    But in which table do we get all of the foll. data:
    - Message class
    - Message number
    - Modification name
    - Modification created by
    - Modification done on
    - Last changed by
    - Last changed on
    Kindly help. A <removed by moderator> solution would be really helpful.
    Best Regards,
    Smruthi
    Edited by: Thomas Zloch on May 5, 2011 12:07 PM - urgency reduced

    Hi Smruthi,
    The modification changes would be in the SMODILOG table. Please note this is a core basis table and should not be changed, however to best find your changes search under the TRKORR field with the relevant tp request.
    Best regards,
    Derrick Hurley
    Development Workench

  • User status- when selected it logs date/time & User in Work Not. long text

    Hello,
    Is there a way when a user clicks on a user status on Work Notification the long text will be updated to date/time and username.
    For example:
    If we have 3 approval process: Supervisor Approved, Deputy Manager Approved,, and Manager Approved.
    When the Supervior press the Supervior Approved (User Status and saves) the long text on the Work Notification will update with log of  time/date & user. Then the same for the next 2 approvals.
    This will help us a lot.
    Thanks,

    Jay,
    I really dont know why you guys need to update the long text when user status has been changed. You could simply trigger the email to the approver who needs to be notified. but anyway if this is your rqmt, I think you can do it thru field exit. Talk to ABAPer and get a help from him
    Mahee

  • How do I get to the start of a really long text message conversation without scrolling through them all? Thanks

    Hi. How do I get to the start of a really long text message conversation without having to scroll through and load earlier messages repeatedly?  Thanks

    click on the top of the screen (the top bar/clock sectionish).  Hope i helped

  • ECC5.0 Long text Problem in QM02

    Hi friends,
    when i am create Item long text in Qm01 when i am reading the text in from FM read_text in tlines my structure is
    tdofrmat ,tdline
             text1(72)
    =          text1(72)
             text2(59)
    after saving the long text and when i am trying to read in QM02 mode ,with same FM i am getting as.
    tdofrmat ,tdline
    X>         * text1(72)
    X>         * text1(72)
    X>         * text2(59)
    Hope u under stand my problem.
    How to Indentify which line is continous to which one,where the word was splitted.i searched FM's but i didn't get.i tried with "Newline" by refering Class No result.Gurus kindly Provide the solution......
    In Advance Thanks...

    Hi,
    Did you try this:
    text1(72)
      text1+72(72)
    text2(59)
    Regards.

  • Recording Differences in Long Text Changes via Table Logging and AUT10

    Hello,
    I am trying to record changes to Long Text generated in a DMS DIR.  (This field is the Language Dependent Description field.)  We have set the system profile param rec/client.    We have enabled table logging for STXH & STXL in SE11.  When we make a change to the Long Text, we try to display the results in AUT10.  A change is indicated but when displayed, the text seems identical. 
    When displaying Logging status in RSTBHIST, the Active box for STXL is not checked despite the fact that we have set the "Log changes" box in SE11.
    Note #573291 talks about installing a PH-ELR add-on.  Is that necessary if we are already running SAP_APPL 6.04?
    Also, is Table Logging the best approach to capture these changes to Long Text?  Is there any way we could use Change Docs"?
    The field width of DBTABLOG-LOGDATA = 16000 if that matters.
    Thanks for any responses.
    Edited by: John K Ryan on Oct 13, 2011 9:20 AM

    Tobias,
    "You created a dynpro based transaction which allows you to change
    the content of a text. The text to change is not part of the dynpro
    screen, but you want to set it into an ITS field where you can access
    it using Bussiness HTML. Is this correct?"
    <b><u>This is correct.</u></b>
    Below is the portion of HTML template code in which I'm defining the web screen pushbuttons, providing the pushbutton names, and linking same to the function codes defined in the R/3 transaction.
    This is my first experience with ITS, so if I've missed something glaringly obvious, I apologize in advance.
    Thanks!
    <table>
      <tr>
        <input type=submit name="~OKCode=ANAL" value="Analysis Long Text">
      </tr>
      <tr>
        <input type=submit name="~OKCode=ROOT" value="Root Cause Long Text">
      </tr>
      <tr>
        <input type=submit name="~OKCode=RMCA" value="Remedial Corrective Action Plan Long Text">
      </tr>
      <tr>
        <input type=submit name="~OKCode=CRAP" value="Corrective Action Plan Long Text">
      </tr>
      <tr>
        <input type=submit name="~OKCode=PRAP" value="Preventative Action Plan Long Text">
      </tr>
      <tr>
        <input type=submit name="~OKCode=COMM" value="Comments">
      </tr>
    </table>

  • Why is it, after all the years with this service, my wife can't get service, send a text without a long delay from the high school she works at 4 miles away??? The phone works great in the middle of corn fields but in the dead center of town, at the high

    I have been with Verizon since they started in Peoria, IL and yet to this day I don't understand why when my wife goes to work at a high school, dead in the middle of town, she has no service, can't send a text without a huge delay and can't receive phone calls?  I can be out of Peoria in the middle of a corn field and I get calls without a problem, yet but within the city no service at Peoria High School or very limited.  This causes the phone to drop from LTE and then eats the battery.

    Service isn't guaranteed inside of buildings especially buildings filled with steel, concrete and electrical wiring. High School buildings definitely have all three.

  • HT3529 How do I send a group text, I have set up groups in my gmail account but can't figure out how to send a group text without adding them all individually

    How do I send a group text message, I have groups set up in my gmail account but can't figure out how to send a group text without adding them all individually ?

    You can use iCloud:
    Step 1. Log into www.icloud.com using your Apple ID.
    Step 2. Click on Contacts and then click the groups ribbon (the red icon with two people) which is on the left-hand page when viewing All Contacts.
    Step 3. The left page changes to a list of Groups (only those groups stored in iCloud are shown). Click the + button at the bottom to add a new group.
    Step 4. Type a name for the new group and press Enter to save it. To change it after this, double-click its entry in the groups list.
    Step 5. To add contacts to the new group, click on the All Contacts group and locate the first person to be added (you can use the search bar to find them quickly).
    Step 6. Drag their name on top of the new group and drop it to add it to that group.
    Step 7. To add more contacts, repeat steps 5 and 6, but you can add multiple contacts at once by pressing Ctrl (on a PC) or Command (on a Mac) and clicking on each contact in the list that you wish to select. Then, drag one of the highlighted names to the new group and they will all be added.
    It's possible to add names to more than one group, and you can create as many groups as you like.
    Step 8. Launch the Contacts app on your device (iPhone, iPod touch or iPad) and you should see the new group appear almost immediately - as long as you have an internet connection.
    Until Apple builds in a function to create groups directly within the Contacts app, this is the best way to do it.

  • How to load long text in BOM line item

    Hello Experts
    How do i load Long text in BOM Line item using LSMW
    Thanks
    S
    Edited by: Alvaro Tejada Galindo on Jan 31, 2008 5:11 PM

    Use Read_text function module.
    you need to pass
    ID
    LANGUAGE
    NAME
    OBJECT   to the function moduel
    To find the Text id name language and object these are the following steps. Example: FB02
    1. goto FB02, Enter Document number
    2. from menuselect Goto>Header-->header Text..... New window will be displayed 
    3. select the Header Text. here you can see all the text. 
    4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper. 
    5. in the Next window you will find Text Name. Text ID, Language. etc...
    Regards,
    Lalit Mohan Gupta.

  • How to validate long text in me31k( contract creation)

    Hi,
       I want to validate the long text in creation of contract(T_code - ME31k). In creation it self i want to get the long text for validation. How to get the long text value. For eg. "Release order text'  i am giving the value as '10'. While saving the document in ME31k i need to get the long text. Please do the needful.
    Thanks
    Jag
    Moderator Messag: Do not expect the forums to do your work for you.
    Edited by: kishan P on Jan 19, 2011 4:33 PM

    Use Read_text function module.
    you need to pass
    ID
    LANGUAGE
    NAME
    OBJECT   to the function moduel
    To find the Text id name language and object these are the following steps. Example: FB02
    1. goto FB02, Enter Document number
    2. from menuselect Goto>Header-->header Text..... New window will be displayed 
    3. select the Header Text. here you can see all the text. 
    4. click on the TEXT (which you want to know the Text id) , then press log ICON (you can find in bottom right of the text window) it looks like a rolled paper. 
    5. in the Next window you will find Text Name. Text ID, Language. etc...
    Regards,
    Lalit Mohan Gupta.

Maybe you are looking for