QN reference to purchase order with item task

Intention: Wanted to run a report to have the following information:
- QN number
- Item task
- Reference document: Purchase order
Is there any way to run such report? Have tried QM13 but it does not contains purchase order

SAP has provided two type of report for QN.
one at header level (QM11) & second is item level (QM13).
QM11 contain Ref. document & PO number but not task information. QM13 contain task info but not PO number.
SO to fulfill your req. go with custom one. copy QM13 & add PO number & other header info if required.
Hope this help.
Thanks!!!

Similar Messages

MD04: Unable to see Purchase Orders with Item Category S

Hi,
Whenever we create Purchase Orders with Item Category S (3rd party), they are not visible in MD04 Stock Requirements list.
Is there anyway we can get the Item category S Orders to be displayed in the MD04 list?

Hi,
I am unable to see Third party POs with open quantity also.
If I create a PO with blank item category (i,e to stock, it will show in MD04)
but if i create PO with item category S (it does not show in MD04)
Can you suggest how we can get item category S POs to be displayed in MD04

Project Commitment Cost not visible for Purchase Orders with Item Categry Q

Hello All
I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
Request your help with this problem
Regards
Renjith

Hello
Could you please explain how to maintain that?
Best Regards
Renjith

Multiple purchase orders with items in one IDOC

Hello Team
Now i got a the below requirement. please check and suggest me accordingly.
1. In my souce system (ie legacy system) i have a table which is having PO related header and item data. now i need to post that data into SAP by using IDOC. so now i need to create a IDOC in middleware system with PO related data. Here my question is for how many POs i can create 1 idoc, i mean i want to know what is the maximum PO's i can put in 1 IDOC. parallely i want to see the performance issue also. so please suggest me on what is the maximum no of POs with item data i can put in 1 idoc and suggest me what is the preffered limit based on performance issues.
2. Suppose if i put 10 POs in 1 idoc, out of which there is issue with PO data for 1 PO in that idoc. so i want to know whether the idoc will process or not. if process how many PO's it will process. is it like 9 POs it will process and 1 PO it wont process. please clarify.
Regards
Raj

Hi Nagaraju,
As others suggested you can use 1 idoc per po. So for each header and its items in XI a message will be created.
Else
With select statement you can select all the POs and change the occurrence of idoc from 1..1 to 1..unbounded. Now also one message will be created in xi, (within the message you will have multiple idocs) but when posting in sap each one post as a seperate idoc. Here the advantage is you have one message where as in another you have multiple messages. But the disadvantage is trouble shooting might have some issues and if it is more than 1000 idocs the performance may take a hit. Here 1000 is just an example.
Regards,
---Satish

Third-party Purchase Order with Item Cat. : S

Hi,
I want to know about third party Po ? is there any customization required for this type of PO, what are the cases wehe we can use the Third party PO what is main difference between Normal PO and Po with Thiedt part Item category.
regards,
zafar

Dear,
You dont need to have any specific config only need to mainatin in Material Master view for ITEM CATEGORY GROUP sa BANC, which will propose ITEM CATEGORY in Sales Order as TAS,which automatically generate a Purchse No. and against this purchase requsition u will create P.O. and will do MIRO and after MIRO u can bill this to customer and it will be ORDER RELATED BILLING as in Third party once u raise the P.O. the vendor deliver goods directly to ur Customer against P.O..
Futher need clarification revert back to me.
Regards
AJIT K SINGH
HAPPY TO HELP U

How to Create Purchase Order with Co Product greater than Consumption

Hi All,
I'm new to SAP. Can any one please help with the steps to create PO with Co Product greater than Consumption.
Thanks in Advance.

Hi Srinivasu,
If you are talking about handling by-products during subcontracting follow the following steps.
Create Purchase order with item category "L". In the components tab maintain by-product in negative quantity. If you are not sure about the actual quantity, enter theoretical quantity ( Actual quantity can be adjusted in Subsequent adjustment in Goods receipt).
Hope this helps you.
If this has not helped you, please elaborate your requirement.
Thanks
Vasuki B S

Create purchase order with reference to Sales order Line item

Hi All,
i had a requirement that i need to create the Purchase order with reference to sales order line item...
In T.code me27 client requied a input field for sales order no and with that order reference he want the data of line item to PO creation line item screen.....
please sujjust......how to proceed......
regards,
Ravi Nemani

Hi
Go to SPRO->Logistic general->Tax on goods movement->India->Movement types.
Here you will find the group of movement types check which movement types is mantained for the out side movement groups or inward movement.
also check the Material Master in MRP view if the collective requirements (02) is mantained.
Regards
Sri

Purchase requisition with Item Category – L creation via Maintenance orders (Plant Maintenance)

Hi Guru’s,
I have a scenario where purchase requisition with Item Category – L (subcontract External) for Repair items (Storeroom Process) need to get generated with Item category-L.This requirement is to MAP in my system.
I am aware that purchase requisition can be created with reference to maintenance orders.
Can anybody through some light on the integration between PM and MM.
If creation of purchase requisition is possible via maintenance orders then please explain me with detailed steps both configurations and master data so that I can able to replicate the same as per business requirement.
I look forward to the expert’s response.
Regards,
Kumar

Hi Kumar.S
You have to installed DIMP 6.0, and activated the business function Refurbishment and Subcontracting (LOG_EAM_ROTSUB) and Serial Numbers in Purchasing (LOG_MM_SERNO) .
Please check the below link:
http://scn.sap.com/thread/1956895
Hope it will help you to resolve your issue.
Regards,
Ritesh

Help Bapi Purchase order with reference to purchase requisition no

Hi,
i used BAPI_PO_CREATE1 for creating purchase order with reference to Purchase requisition number but im getting these error
please help me to solve this
1 E BAPI 001 No instance of object type PurchaseOrder has been created. External reference:
2 E MEPO 001 Purchase order item 00010 still contains faulty schedule lines
3 E 06 054 Doc. type/item cat. NB/S (requisition) <-> NB/ (purch. order)
4 E 8W 162 No schedule line exists for schedule line number 0010000030 00010 0000.
Thanks & Regards,
Azhar
Message was edited by:
Azhar

Hi Azar,
I am also getting the same messages, did you get resolve the issue.

Purchase Order with reference to Purchase Requisition

Hello
I have this situation:
One Purchase Requisition with quantity of 10.
When I issue a Purchase Order with reference to this purchase requisition, for the moment I can use this Purchase Requisition many times. For example: two Purchase Order with the same purchase requisition, same item and same quantity.
The objective is thay the system only allows to use the Purchase Requisition until the quantity is completed. For example: one purchase order for 10, or two purchase orders with 5 each. But never with a quantity superior to the total quantity in the purchase requisition.
Somebody can help?
Thank you,
Elena

Hi,
1) By setting the configuration paths as suggested by the previous posts.
2) In the first place, when converting a PR in PO Create Screen (ME21N), you should make the Open only and Released only field as Display. This way, the results will only show Open and Released PRs to be converted to PO
Hope this helps

Program for Creating Purchase Order with reference to purchase requisition

Hi ,
I need to Create purchase Order with reference to Purchase requisition,
in my case i need to automize the Process which is happening in MD04,
Can you please suggest me ?
Thanks ,
Murali

Hi,
Plz check this link. It will be helpful to you.
Purchase order creation with reference to PR
We can also create the PO Using the BAPI_PO_CREATE1 function module.
In this function module fill up the all necessary Details.
With details in Item Table we haveto give the Fields PREQ_NO and PREQ_ITEM for each item .
then it will creates the PO with PREQ.
Thanks & Regards,
Sarita Singh Rathour
Edited by: Sarita Rathour on Aug 3, 2009 7:01 AM

Create Purchase Order with reference to Purchase Requisition using BAPI's

Hello Experts,
I need to create a Purchase order with reference to a Purchase Requisition.
All the above has to be done by using BAPI's.
For creating PR, I am using BAPI_REQUISITION_CREATE.
and for PO, I am using BAPI_PO_CREATE.
I am not able to use the requistion number in the PO. BAPI throws the following exception
"Requisition 1014396 00010 not selectable"
"Document contains no items"
Query's:
1. Do I need to release the PR for using it in PO?
2. If so how can I work with the "BAPI_REQUISITION_RELEASE_GEN" to release PR?
I have tried using the BAPI getting the following error "Release outside filed of responsibility".
Please help I am in critical Postion...
Thanks,
Suma

Hi Meenakshi,
When, I try to release error I am getting the following the error " Purchase Requisition can not be released".
Is this problem because of authorization or data issue?
Thanks
Suma

Function module to create Inbound delivery with reference to Purchase Order

Hi experts,
I want to create Inbound delivery with refernce to Purchase Order. But I want to create item wise. For example If one purchase order is there with 10 line items. 10, 20, 30, 40, 50......100.
If I am showing report for Purchase Order with select option and if I select first 5 line items 10, 20, 30, 40, 50 then my program should be create one Inbound delivery for selected line items only. I have tried BDC for Tcode VL31N, but its not worked. Is there any Function module to create Inbound delivery with reference to Purchase Order for selected line items????????

Hi,
Try FM RV_DELIVERY_CREATE or GN_DELIVERY_CREATE.
For creating a delivery wrt PO u 1st need to have a sales order i guess.
Regards,
Amit

Allow to create a purchase order with purchase requisiton item deleted

Dear all,
I have a question about creation purchase order process.
Firstly, I have a purchase requisition with 2 items, first of them is deleted.
If I try to create a purchase order thru transaction ME57N with the previous purchase requisition, I can only create it with one item (the one wich is not deleted)
However, if I try to create the purchase order thru transaction ME21N, with purchase requisition as reference, I can create the PO with item that was deleted in PR.
I don't understand why system allows to create a purchase order with an item that previously was deleted in PR.
Does anyone have a explanation about this issue?
Many thanks in advance
Best Regards.

Hi,
In the document overview of ME21N you get all the items of the purchase
requisitions, no matter if they are deleted or not.
When you convert the deleted item into a Purchase Order you get message
06 050 stating that this item is deleted in the purchase requisition.
This message can be defined as an error message in the customizing
transaction OME0. This way, it will not be possible to order an item
which is deleted in the referenced purchase requisition.
BR
Nadia Orlandi

ME21N Create Purchase Order with reference to previous Purchase Order

Hello Expert,
Previously have been using Purchase Info Records for reference when creating Purchase Orders using ME21N. We then have deleted the Pricing Condition in the Purchase Info Record using ME12. Now when we are trying to create a new Purchase Order with the same values (Vendor, Material, Plant and Storage Location), the transaction code ME21N automatically fetches the previous values of the Pricing Condition as if it was cached. I remember of studying this in the MM academy but I am not sure how to disable it.
This error only happens when we are creating the first Purchase Order after the deletion, for the second Purchase Order, error will be prompted to the user saying that the Pricing Condition could not be found.
I would like to ask where in configuration can I delete this cache behaviour or is that any work around for this.
Thanks in advance.

Hello Antony,
I found the "Update Prices" function in the Conditions Tab of the Item Details helps to refresh the data and fetch the new information from the Purchase Info Record. I would like to ask is there anyway to provoke this function automatically everytime when a user runs the transaction ME21N.
Thanks in advance again.

QN reference to purchase order with item task

Similar Messages

Maybe you are looking for