QoS EOIO - How to Configure in JMS adapter?

Hi there,
In order to configure the JMS sender-adapter with EOIO QoS, I need to provide 2 "extra" parameters. These are
1)Queue ID
2)Processing J2EE Cluster Server (ClusterID)
So far I was able to find out the name of the ClusterId in our system but for the Queue ID I still have some doubts.
From the XI documentation I understand that for QoS EOIO , all messages share the same queue. They also say; <i>The "suffix" of this queue must be explicitly set in the application program by a <u>serialization context</u> before the client proxy is called.</i> What exactly is <i>serialization-context</i> in this context?
Can someone provide me with a clear explanation which steps I need to follow in order to use the functionality of QoS EOIO? And if possible some example of the name of an EOIO queue?
Thanks,
R.

Hi Roberto,
For queue ID, you can specify any arbitrary queue ID for example, POQueue1, jayqueue or salesorder...
It can be anything you want and no additional configuration is needed. Just specify any name you like to use for queue ID and you are all set.
Thanks,
Jay

Similar Messages

How to configure an jms adapter to use ActiveMQ?

Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
     java.naming.factory.initial     org.apache.activemq.jndi.ActiveMQInitialContextFactory
     java.naming.provider.url     tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
     at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
     at javax.naming.InitialContext.lookup(InitialContext.java:351)
     at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
     at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
     ... 51 more
what should I do? can someone give me a detail resolvent?

I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
          <import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
     <imported-shared-libraries>
          <import-shared-library name="apache.activemq"/>
     </imported-shared-libraries>

How to configure the jms adapter

hi all,
i got some trouble trying to configure de JMS adapter, i 'd be glad if some colud give me a hand with this. i'am wordering if there is a complete document about this topic to help me out with de configuration.
thk u all very much.
Regards, Pablo

Hi,
The below URL will help you to understand what is JMS, how to configure and do a testing.
http://learn-oraclesoa.blogspot.co.uk/2013/04/oracle-jms-adapter-tutorial.html
Below will help you to configure the JNDI for JMS
http://manojm-nair.blogspot.co.uk/2013/02/configuring-connection-jndis-for-jms_13.html
Thanks,
Vijay

Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!

Hi,
Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
Also could any1 tell me what is the configuration for JMS Adapter sensor action?
Any suggestions how do I go about it??

Hey Anirudh,
Thanx for the response :-)
All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
<actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
<action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
<property name="JMSConnectionFactory">jms/L_QueueCF</property>
<sensorName>ActivitySensor_JMS</sensorName>
</action>
</actions>
This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
Right now the XML message added to the Queue is:-
<actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
<header>
<sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
<activityConfig evalTime="completion">
<variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
</activityConfig>
</sensor>
<instanceId>950016</instanceId>
<processName>Test_JMS</processName>
<processRevision>v2009_04_15__40833</processRevision>
<domain>default</domain>
<timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
<midTierInstance>app01.ulrhome.com:9700</midTierInstance>
</header>
<payload>
<activityData>
<activityType>scope</activityType>
<evalPoint>completion</evalPoint>
<durationInSeconds>0.011</durationInSeconds>
<duration>PT0.011S</duration>
</activityData>
<variableData>
<dataType>12</dataType>
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
<queryName/>
<target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
<updaterName>AddL_Entry</updaterName>
<updaterType>scope</updaterType>
</variableData>
</payload>
</actionData>
My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
What I would want the message in the Queue to be is : -
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
<action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
<property name="JMSConnectionName">Log</property>
</action>
</actions>
Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
Regards,
Akshatha.

How to configure the JMS application in WSAD 5.0

hi
i need to configure an JMS application in WSAD 5, but while configuring the application i am checked with intial context exception. but i have configured the jndi in the server. but i cant able to run the application.
can anybody help me like how to configure the JMS application in WSAD (can we configure it without MQ simulator if yes i need the steps)
thanks in advance

Hi,
did you check the WebSphere documentation or ask a question on an IBM forum?
Frank

How to configure sender mail adapter

Hi,
My scenario Mail-XI-file. In adapter monitoring it is giving me error "not initialized: mail agent null". What do we exactly mean by this??
and can anyone suggest any blog as how to configure sender mail adapter.
Kindly help
Anu Singhal

Hi Anu,
Just check this link
http://help.sap.com/saphelp_nw04/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
and this 1
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e6c7911-0d01-0010-1aa3-8e1bb1551f05
Rewardif helpful
Reagards
Sachin

How to Configure Microsoft loopback adapter in windows 2008

Hi all,
I am trying to install SAP IDES 6.0..... while i m trying to install it , it is asking forUnlimited Strength Jurisdiction Policy Files at runtime.
I do have local and US policy jar file, but i guess its asking for JCE extension file, i dont know about it. so i m not able to proceed
further. it gives osme error about local host. i think its about Microsoft loopback adapter. can anyone have idea abt it.How to
Configure Microsoft loopback adapter in windows 2008?
Can anyone help me ASAP coz i m stucked like anythng.
thanks
Cheers

Hi vinay
Thanks for reply...I m Installing SAP IDES...with DB2
I have upload JCE zip file...after clicking next button i m getting following Errors,
ERROR 2014-10-02 09:52:29
MOS-01185 The subkey 'HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\DPS' does not exist on the 'localhost' host.
ERROR 2014-10-02 09:52:29
FCO-00011 The step collect with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_GetSidNoProfiles|ind|ind|ind|ind|2|0|collect was executed with status ERROR .
i guess its about Loopback adapter configuration. Still i m not sure... DO u have any idea about it.
How i can get rid of it.
Thanks

Configuration of JMS Adapter in Central Adapter Engine

Hi all,
I have configured Sender JMS Adapter in Central Adapter Engine with the following parameters:
Adapter type : JMS
Transport Protocol : WebSphere MQ (non-jms)
Message Protocol : JMS1.x
Adapter Engine : Integration Server
Queue Connection Factory java class :Com.ibm.mq.jms.MQQueueConnectionFactory
Queue java class : com.ibm.mq.jms.MQQueue
ipadd : localhost
port : 1414
Queue Manager name : TEST.QMGR
Channel Name : CH1
JMS Queue : LQ
CCSID : 437
Protocol : TCP/IP
JMS-compliant : WebSphere MQ(non-jms)
JMS Queue user : MUSR_MQADMIN
Mapping of message : Entire Message = JMS Payload
But the status is red with an error message Sender Details : NULL
Could you please tell me what went wrong?
Regards
Sathya

Hi,
Make sure that Websphere MQ server is running.
If u r comfortable with java, you can even write a Java code to acces the server and check if the JMS server is working fine. Some times there will be sample applications provided by Websphere MQ itself.
Once the java program works then it will be easy to debug the error over here.
Regards,
P.Venkat

How to configure RFC receiver adapter

HI,
I have a Proxy-to-RFC scenario. But I have no knowledge in RFC receiver adapter. Could you please provide me the step-by-step guideline or sample about how to configure RFC receiver adapter.
Thanks in advance.
Best regards, Johnney.

Hi,
Refer these links which will help you understand the concept and configure the Scenario.
http://help.sap.com/saphelp_nw04/helpdata/en/c8/e80440a832e369e10000000a155106/content.htm
The specified item was not found.
Refer this blog for synchronous scenario
RFC Scenario using BPM --Starter Kit
Sender RFC Adapter:
The specified item was not found.
Troubleshooting - RFC and SOAP scenarios *** Updated on 20/04/2009 ***
RFC -> file scenario: application stopped
https://www.sdn.sap.com/irj/sdn/advancedsearch?query=rfctofile&cat=sdn_all
RFC to file
RFC -> XI -> WebService - A Complete Walkthrough (Part 2)
Send RFC to SAP XI Asynchronous
The specified item was not found.
ABAP Proxies in XI(Client Proxy)
Regards,
Nithiyanandam

Configuration of JMS adapter Using WebSphereMQ

Hi All
I am trying Http to JMS scenario.
I configured my JMS adapter as receiver
Trasport protocol: Web sphereMQ JMS provider.
Queue Connection Factory : com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java class : com.ibm.mq.jms.MQQueue
IP address : 172.17.50.150Where I installed Web Sphere MQ
In SXMB_MONI my http client sends msg without any error
But In runtime work bench whn I observe Adapter monitoring I got error as
Receiver channel. Details: MQJMS2005: failed to create MQQueueManager for '172.17.50.150:QM_APPEL'
PLZ ell me d coz
Thanks

Hi,
for the configuration of a Websphere MQ JMS adapter, you will have to also give details like, Queue Manager Name, channel name, etc.
Just check this link for the same,
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/content.htm
Provide all the correect details and it will hopefully work.
Regards,
Bhavesh

Store and Forward agent configuration in jms adapter - jdeveloper

I am created the store and forward (SAF) agent in weblogic to communicate with another weblogic server.
after creating it i tried to configure it in jms adapter wizard but i can't able see my SAF Queue there.
so now how can i give payload to my SAF queue for testing it.
Please provide any suggestions, i will provide with the points.
Thanks,
Ajay Athuluri

So I don't know much of the details of AIA, and next to nothing of the pre-built integrations, so can't help you much there. However are you sure you've got all the requisite SAF configuration right? The JMS and SAF component hierarchies are a real rats' nest of trouble. This is a setup I've found to work:
* SAF Agent, targeted to a managed server; needs to use the default filestore (ie when configuring it you don't specify one)
* JMS Module containing:
     * SAF Remote Context, pointing at your remote WLS instance
     * JMS SubDeployment, targeted to the SAF Agent
     * Connection Factory, targeted at the managed server
     * SAF Imported Destination, targeted at the SubDeployment
     * Queue in the Imported Destination, with WLS and JNDI names set up so they're different in the sending domain and receiving domain
The pre-built integrations will (probably) have the JNDI names you need to configure in the documentation.
HTH!
Paddy

How to Configure Receiver Mail Adapter?

I need to designed a BPM if Message is failed to update database then send an e-mail to alias group in Microsoft outlook by using Receiver Mail adapter.
Can someone help me to design above BPM and how I need to configure receiver mail adapter.
Thanks in advance!
Mrudula

I am getting <Trace level="3" type="T">Unknown channel type: Mail</Trace> when it tries to call "MAIL" adapter.
Does anyone has any clue where should I look?
Thanks!
Mrudula
<Trace level="3" type="T">Calling pipeline service: PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">Reading Pipeline-Service specification...</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = =SWITCH=</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS =</Trace>
<Trace level="3" type="T">P_IFNAME =</Trace>
<Trace level="3" type="T">P_METHOD =</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Unknown channel type: Mail</Trace>
<Trace level="3" type="T" />
<Trace level="3" type="T">Pipeline service specification (table SXMSPLSRV)</Trace>
<Trace level="3" type="T">PLSRVID = PLSRV_CALL_ADAPTER</Trace>
<Trace level="3" type="T">PLSRVTYPE = AENGINE</Trace>
<Trace level="3" type="T">ADRESSMOD = SD</Trace>
<Trace level="3" type="T">P_CLASS = CL_XMS_PLSRV_IE_ADAPTER</Trace>
<Trace level="3" type="T">P_IFNAME = IF_XMS_PLSRV</Trace>
<Trace level="3" type="T">P_METHOD = ENTER_PLSRV</Trace>
<Trace level="3" type="T">FL_LOG =</Trace>
<Trace level="3" type="T">FL_DUMMY = 0</Trace>
<Trace level="3" type="T" />
<Trace level="1" type="B" name="CL_XMS_MAIN-CALL_PLSRV_LOCAL" />

How to configure a JMS Queue

Hi,
I have an EAR file thai includes an EJB 3.0 module with a MDB. I use a Queue.
This is my code,
@Resource(mappedName = "jms/NotificationQueue")
private Queue notificationQueue;
@Resource(mappedName = "jms/NotificationQueueFactory")
private ConnectionFactory notificationQueueFactory;
public Customer update(Customer customer){
Customer updated = em.merge(customer);
try {
sendJMSMessageToNotificationQueue(updated);
} catch (JMSException ex) {
Logger.getLogger(CustomerSessionBean.class.getName()).log(Level.SEVERE, null, ex);
System.out.println("Customer updated in CustomerSessionBean!");
return updated;
private Message createJMSMessageForjmsNotificationQueue(Session session, Object messageData) throws JMSException
//Modified to use ObjectMessage instead
ObjectMessage tm = session.createObjectMessage();
tm.setObject((Serializable) messageData);
return tm;
private void sendJMSMessageToNotificationQueue(Object messageData) throws JMSException
Connection connection = null;
Session session = null;
try
connection = notificationQueueFactory.createConnection();
session = connection.createSession(false, Session.AUTO_ACKNOWLEDGE);
MessageProducer messageProducer = session.createProducer(notificationQueue);
messageProducer.send(createJMSMessageForjmsNotificationQueue(session, messageData));
finally
if (session != null)
try
session.close();
catch (JMSException e)
Logger.getLogger(this.getClass().getName()).log(Level.WARNING, "Cannot close session", e);
if (connection != null)
connection.close();
layed inside a stateless EJB 3.0.
And the MDB looks as follow,
@MessageDriven(mappedName = "jms/NotificationQueue", activationConfig = {
@ActivationConfigProperty(propertyName = "acknowledgeMode", propertyValue = "Auto-acknowledge"),
@ActivationConfigProperty(propertyName = "destinationType", propertyValue = "javax.jms.Queue")
public class NotificationBean implements MessageListener {
public NotificationBean() {
public void onMessage(Message message)
try
Object msgObj = ((ObjectMessage)message).getObject();
if (msgObj != null)
Customer customer = (Customer)msgObj;
System.out.println("Customer with the following details has been updated:");
StringBuilder sb = new StringBuilder();
sb.append("Customer ID=");
sb.append(customer.getCustomerId());
sb.append(", ");
sb.append("Name=");
sb.append(customer.getName());
sb.append(", ");
sb.append("Email=");
sb.append(customer.getEmail());
System.out.println(sb.toString());
catch (JMSException ex)
Logger.getLogger(NotificationBean.class.getName()).log(Level.SEVERE, null, ex);
I have configured both "jms/NotificationQueue" and "jms/NotificationQueueFactory" inside OC4J server.
But when I try to deploy the EAR file, the server gives me the following error,
Operation failed with error: No destination location set for message-driven bean NotificationBean
How must I do to let the EAR file be deployed?
Thanks in advance
Jose

Mingzhuang
I want to configure a error queue for weblogic jms topic. Wanted: The message goes to error destination when messages have expired or reached their redelivery limit.
1. using jms transport configure proxy service:
Retry Count :3
Retry Interval:10
Error Destination: ErrorTopic
Expiration olicy: RedirectUnlike File/SFTP, JMS proxy service definition does not have the concept of Error Destination. To accomplish similar functionality go to JMSQ on (for which proxy is configured) server console (http://localhost:7001/console) and configure the Error Destination. Following URL will help in how to configure JMS Q.
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueues.html
http://edocs.bea.com/wls/docs103/ConsoleHelp/taskhelp/jms_modules/queues/ConfigureQueueDeliveryFailure.html
I tried use the proxy service to consume message from the jms topic . and generation an error in the proxy message flow. But the message didn't goes into the error topic.If every thing is configured as per above step, then the after retries, the weblogic server will put the message into JMS topic configured. Your proxy will receive from this topic.
Let me know if we are not on same page.
Cheers
Manoj

How to Configure Reciver HTTP Adapter

Hi,
i am doing Proxy-HTTP syncronous scenario.
Proxy will fetch XML file located in one server.
(example: www.yahoo.com/exchange_rate.xml)
i have following problems.
1. How to configure the Reciver HTTP Adapter.
2. What should I use in Address Type.
HTTP Destination or URL Address.
3. If I use HTTP Destination , The length of the field is very short to accomodate complete address.
4. If I use URL address, what should I put in all the fields , like Target host, Service Number, path.
I have URL , something like this, www.yahoo.com/exchangerates.xml
I dont know what to put in Target Host, service name and path.
Please help. thx. BD.

Hello,
if you use a HTTP-Destination it uses a rfc-destination.
So you configure first a rfc-destination (in sm59 of type G)
and name it for example RFC_EXAMPLE and then you
use this name for the HTTP-Destination in your adapter.
if you use the url
Target host:
- you can use the ip
Service Number:
- that means the port you want/must use
path:
- in your case: /exchangerates.xml
Regards
Patrick

How to configure Sender IDOC adapter

Hi could someone pls guide me on the steps that i need to take to configure IDOC sender adapter..
Are the steps for Sender and Receiver IDOC adapter same other than the fact that sender idoc adapter doesn't need a sender communication channel.
Regards,
Ashish

hi Goyal,
Just check out this link.
How to Configure IDOC
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d19fe210-0d01-0010-4094-a6fba344e098
Regards
Sachin

QoS EOIO - How to Configure in JMS adapter?

Similar Messages

Maybe you are looking for