QOS for Routing updates, LDP, etc
Hi.
We are needing to provide QOS to our voice traffic and we were thinking in configure Precedence 7 to this traffic. The traffic goes through an MPLS Network of 7600 as PE and 12000 as P. Can we configure the routing traffic, LDP and other signaling generated on the routers to use a service class as if the traffic were marked as precedence 6? how can we mark this traffic as precedence 6 changing the default? Is 7 the default value?
Thanks
Hello Pedro,
I did some tests years ago
all routing protocols including OSPF, LDP and BGP uses precedence 6 with the execption of some RSVP-TE messages that are sent out with precedence 0.
Precedence 7 is not used in protocol messages.
However, the recommended value for voip bearer packets is precedence 5 that fits with DSCP EF Expedite Forwarding.
Using precedence 7 is not recommended but you can and you don't need to remark signalling packets.
I would use precedence 5 and I did in the past and also now we use it for voip.
Hope to help
Giuseppe
Similar Messages
-
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
I have three iPhone 4 models purchased in late 2010 (for my family) that all share the same iTunes account for access to apps and music, but each phone/user still has his/her custom contact list, email accts, and select lists of apps and music from the one iTunes acct library. The problem is I can only update the software on one of the three iPhones – the primary phone I used to setup the iTunes acct. What is the best solution to manage these devices for software updates, apps? This is probably a common problem with families wanting to share apps and music without realizing the issues created by this approach. As it stands today... the first (primary) iPhone associated with the iTune acct has been updated with the latest software version 5.1.1 and sync'd up with all the apps, music, etc from the one iTune acct, while the other two iPhones are still running on the original software version 4.0.2 and are experiencing problems now. I was advised by AT&T back in January that it would be necessary to setup separate iTunes accts for the second and third iPhones in order to receive system updates. The problem would be how to keep all the apps, etc from being deleted off the second and third phones that were originally loaded from the one iTunes acct. Since this AT&T advice was prior to iCloud coming out, would iCloud be a better solution or at least part of the solution? I really don't yet understand how iCloud works. Hopefully, someone out there can help me?? Please?
-
My iPod touch was stolen and recovered. I can use my Apple id for this site but the theif changed the Apple id needed to update apps etc and I do not know how to delete his acct. Any help with this will be greatly appreciate
If the thief enabled activation lock on the device, then there is nothing that can be done. Only the password for the Apple ID that it is locked with can disable activation lock.
-
Enabling QoS for enterprise on a router
Hello,
I plan to enable QOS for enterprise on a customer's router between three (3) to five (5) days. Will this have an impact on the router for the said days?
Thanks you in advance,
Martin.Generally speaking no, qos will not impact any operations at all. It will just classify, mark, police/shape, guarantee bandwidth according to the criteria you specify.
But it will not cause any performance issues.
-Terry
Please rate all helpful posts and mark the thread as answered if you have no other queries. -
Re-Org/Update Program for Route determination
Hi
does anyone know if there is a Re-org / Update program for Routes ?
I have added new routes, against Shipping conditions from NO and SE to many Western European Countries , and would like to update Sales orders/ deliveries with these new routes
Many thanks for your advice
TonyHello Tony
For the orders, if you have configured 'Define New Route Determination By Delivery Type', then route redetermination takes place during delivery creation and finds the new route. So I would say don't bother about fixing the orders.
Just ensure you have configured these 2 items in IMG:
LE/Shipping/Basic Shipping Functions/Routes/Define New Route Determination By Delivery Type,
and
LE/Shipping/Basic Shipping Functions/Routes/Define Allowed Actual Route By Proposed Route.
That leaves open deliveries which are not PGIed to be taken care of. -
My iPhone is not receiving mail but the following messages continue to flash over and over at the bottom of the screen: "Checking for messages, Updated just now, Checking for messages", etc. After a minute or so it will flash downloading 1 - 32 messages but nothing is received and then the "Checking for Messages," etc. starts back again. I turned the phone off for 30+ minutes and also tried to reset it, but the problem continues. Any ideas on how to solve the problem?
Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears. -
after update 7.1.0. my sound only works for phone calls,emails etc, but not for music or games
Maybe I understood your problem. Get to Settings > Sounds > Ringers and Alerts >Turn Change With Buttons to Off. And if your Side Switch is assigned to 'Mute', turn it back on, else, use the control center to turn off mute.
P/s: And your name is... -
I have updated my IOS to IOS 6 of my iphone 4.
When i ask for route between two famous places, it gives reply that direction not found between places.
I dont understand
Whats thisI had the same experience with a new iPhone 5 that I bought last week. Did not have a chance to measure battery life before the 6.0.2 upgrade installed but I set up my phone exactly like my 4S and immediately started running out of power after short periods. Went to Xmas get together with fully charged 5 and 4S. Heading home the iPhone 5 shut down for low battery and the 4S had 65% power. Both phones had two half phone calls on then and no data usage.
That night I fully charged the iPhone 5 and, without lighting it up, put it on my night table. Next morning I picked it up and looked at battery indicator and I had 42% charge with NO activity!
Tried it again next night and wound up with 37% charge. (Slept longer).
Today I called the carrier and reactivated the 4S. Took the 5 to Apple Store and they kindly gave me choice of new replacement phone or refund. I took the refund. Uniquely, the Apple Store said it was Verizon CDMA phones that were coming back.
The are other strings on this with temporary solutions, but from my experience with 7 firmware changes on an HTC 4G phone the problem will continue because the solution will be hardware caused. We are in the days where RTM means Rush to Market - not Release To Manufacturing.
I fear the only solution is to either wait for the next model (I did not notice a really major change in performance over the 4S in LTE heavy Seattle area) - or switch to another manufacturer.
It might be useful for these forums to indicate if you have a GSM or CDMA phone to see which have more problems.
Discouraged.... -
I reboot my router updated to IOS 5, still NO on/off selection for mirroring..please help getting disappointed
What are you trying to mirror from? Mirroring from your Mac won't be available until Mountain Lion 10.8 www.apple.com/macosx/mountain-lion/
Setting up and troubleshooting AirPlay Mirroring
support.apple.com/kb/TS4085 -
Sir, We have around 500 items as Insurance Spares in the stores. These spares are checked once in 6 months for their healthiness, storage, etc with a special checklist. We want this checklist an schedule in SAP ( MM). How to do it? Please help.We are presently doing it as similar to PM schedule ( PM module) but want it in MM module.
Hi Prerna
Please refer the this doc ...it might help you
http://www.erptips.com/Samples/ERPtips-SAP-Training-Manual-SAMPLE-CHAPTER-from-Basic-Quality-Management.pdf
and kindly update the status if it works or not
Regards
Partha -
Status Report for Software Update Deployement
Hi,
I am looking for SCCM2012 query for patch status from specific deployment and specific collection. I need the following details in my patch
report with against each machine name
"Total Number of updates required"
"Total Number of updates installed successfully"
"Total Number of Updates Failed"
"Total Number of Updates installing"
"Total Number of updates downloading"
etc.
ThanksThat's a fairly challenging report request. You'll have to pull together information from many different tables, and from what I can tell, you're also looking for some real-time information with the installing/downloading portions as well.
This report has some of what you're requesting:
http://anotherblabla.wordpress.com/2012/03/06/sccm-usefull-software-update-reports/
Some good stuff here too:
http://pleasepressanykey.blogspot.com/2010/08/sccm-patchmgmt-custom-reports.html
You should also consider taking a look at some of the out-of-the box reports in 2012 for Software updates. I don't believe any have
exactly what you're looking but I think most if not all of the components are there and you could extract those and combine them into a new report.
If you're new to reporting, this is a decent guide that I followed and it's decent and will help you get some of the basics.
http://sccmgeekdiary.wordpress.com/2012/10/29/sccm-2012-reporting-for-dummies-creating-your-own-ssrs-reports/
Hope this helps. -
How do I change which Apple ID has to log in for software updates?
I have a MacBook Pro for work. My boss borrowed it to use Keynote, and she must have logged in with her Apple ID for an update. Now, whenever there's an update to Keynote, it wants her to log in. All the rest of the updates are connected to my Apple ID.
Is there any way to reset this? I followed instructions I found online to reset the Spotlight search that was somehow connected to users, etc., but it has reverted back to asking for my boss's Apple ID.You need to delete the app because it is now her app and not your app. After her app is deleted from your MBP, you should be able to again install your app from the purchased pane when signed into your account.
You may want to delete her app using AppCleaner to get all the files;
http://www.freemacsoft.net/appcleaner/
Ask her not to do that in the future. Additionally, ask her to deauthorize her account on your MBP in the iTunes app; iTunes/Store/Deauthorize this computer. -
My "main" comp, the comp I have used for sync's, backups, etc. was destroyed in Afghanistan. I have been trying to update to iOS5 for 3 months and I am using a "new" comp, with latest iTunes, but it won't update; it spends hours backing up my iPhone, then proceeds to mess up my apps and restore old ones long ago deleted. Wiping out my iPhone and all the apps, etc., is not an option, nor should it be. I am really not "apple-savvy" so any help would be greatly appreciated. Do I need to wipe out iTunes on all computers and start from scratch? I've had several people who have succesfully updated try to help me out and have had no success. My work schedule makes it tough to get over to an apple store. If anyone can point me in the right direction, you would be saving me countless hours of frustration as well as countless hours spend re-configuring my iPhone. Thank you.
Carefully follow steps 1-9 outlined by wjosten in this post: https://discussions.apple.com/message/13356770#13356770. This will not, however, avoid wiping any non-purchased media from your phone (ripped CDs, etc.) as this is only synced one way: from your computer to your phone. You will have to either rebuild your iTunes library with this content and sync again to restore it to your phone, or purchase 3rd party software to copy it from your phone to iTunes prior to syncing (such as Touch Copy).
-
Hello,
For a few days I have been trying to access my files on Creative Cloud web without success. I´ve got this message only:
"Page temporarily unavailable. We will return soon."
"We are working quickly to resolve the problem and apologize for the delay.
Check back later or visit our website for status updates.
In addition, you can get help in the forums of the Creative Cloud.
Thank you for understanding!"
(I used Google Translate)
Somebody help?You do not need ?&promoid=KRUVP at the end of the url but it should not matter.
One thing to check is if your hosts file is modified. Open the Command Prompt and type: notepad %systemroot%\system32\drivers\etc\hosts
This will open a read-only copy of your host file in Notepad. Are there any entries in this file regarding adobe.com?
The other thing you can do is open the Developer Tools in the Chrome browser. On Windows press Ctrl + Shift to open them. Switch to the Network tab. Reload the page by pressing Ctrl + r. Check for any 4xx or 5xx errors which should be colored red.
Post screenshots of your results or send me a private forum message with the information. -
Hi, anyone can help me with my password for the WRT54G router. I am trying to reconfigure it, but is asking me for a password. I reset the back bottom, and I entered "admin", but still does not work. It does not go on with the set up.
Thanks, MaribelWelcome to the Cisco Home Community.
Type 192.168.1.1 on your browsers address bar.
When prompted for a password, leave username blank and type admin in the password field.
Enter your configurations.
Do post back for any updates.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router
Maybe you are looking for
-
Hi, guys I'm making my program to read txt file and store the data (number) into 2D array. My txt file looks like this: * Test date: 05/25/05 * Test Temperature: 35F ~Tester: Bob Wilson Current[mA] voltage[mV] Power[mW] -0.0007 -0.0061 0.0006 -0.0002
-
New subscriptions are not available (Germany)
I try to order iTunes Match, but it tells me, that there are no new subscriptions available. I am from germany. Does anyone know what the problems are at the moment and when subscription could be back up? I spended an hour cleaning up my library and
-
[solved] tip - install libgcrypt libraries
Hello, If you have installed spotify on ubuntu 15.04, you might have message like this when launching spotify in command line: spotify: error while loading shared libraries: libgcrypt.so.11: cannot open shared object file: No such file or directoryTh
-
now my iphone is 3GS 32GB and now it is version 4.1 and i make an update to 6.01 and the update is installed but there is an error saying that the activation server is temporarily unavailable and saying try connecting to itunes and to activate and i
-
Problem viewing pdf's in safari
hi, i'm running safari 2.0.2 and acrobat reader 7.0.5. recently, i get a 'failed to open page' error when trying to open pdf's in the broswer. safari's activity window says 'plug-in cancelled' when it fails. i've tried trashing Library/Internet Plug-