QoS for voice over access point AIR-AP1242AG-A-K9

Necesito saber si en el access point AIR-AP1242AG-A-K9 se puede configurar QoS para trafico de voz. El cliente tiene 5 laptops en las cuales tiene instalado softphones ( software de telefono IP). Desde una laptop se genera trafico de datos y voz. Gracias.

Julio,
Yes, you can do QoS on an IOS AP. The below link describes how you configure it.
http://www.cisco.com/en/US/customer/docs/wireless/access_point/12.4_21a_JA1/configuration/guide/scg12421aJA1-chap15-qos.html
Keep in mind, that with a softphone, or even dual-band cell phones, the applicaiton has to be able to mark it's traffic appropriatly, for the QoS to work as it should.
HTH,
Steve

Similar Messages

User unable to connect to new access point AIR-CAP3502P-S-K9

Hi Guys,
In my branch there are 8 access points[ AIR-CAP3502I-S-K9 ] connected to Wireless controller which is been working fine since the beginning.. I had to add two more access points to this branch and after the failure, i realised this Access point [ AIR-CAP3502P-S-K9 ] is latest and it needs the minimum image 7.3.101.. So i did a upgrade on WLC 5508 and all 10 access points have joined successfully...
Issue am facing is when NEW users come under AP 9 and AP 10 get associated successfully, but the old users(Projetc Manager) who been in the branch for very long and able to get associated with other AP's [1 to 8] gets associated successfully with all old AP's but not with the new AP's..
Could please some one advise, why this strange behaviour... I googled for answer but am not getting any right solution...

Issue am facing is when NEW users come under AP 9 and AP 10 get associated successfully, but the old users(Projetc Manager) who been in the branch for very long and able to get associated with other AP's [1 to 8] gets associated successfully with all old AP's but not with the new AP's..
Do you have AP Groups configured?
The old wireless clients, are their drivers up to date?

External recording indication for voice over recording

hi,
i'm wondering if there is any way to get recording indication for voice over recording out of final cut pro or soundtrack pro. i need to get the 'on air' signalization to the speaker room which is not the same as editing room.
i'm looking for something like
http://www.punchlight.com/?q=node/10
which i'm used to use with protools. does anybody have any idea?
thanks for help

How about a switch you throw to turn on a recording light in the booth? I think less tech here is likely better.
Jerry

Satellite A200-27R Integrated microphone for Voice over IP

The product description (see excerpt below) for a Satellite A200-27R states that the A200-27R has an Integrated microphone for Voice over IP. I have not been able to access this(e.g. with Skype, Live Messenger, Control Panel) nor is there any sign of it externally on the computer. The Control Panel > Sound > Recording tab says Microphone Realtek High Definition Audio not plugged in.
How do I set up and use the Integrated microphone for voice over IP?
Special features Enhanced Intel® SpeedStep® Technology
SM BIOS compliant
HD Audio support
Microsoft® Windows® HotStart? for instant-on entertainment
Multimedia Bar with 6 Easy Keys (Internet Browser, CD/DVD launcher, Play/Pause, Stop, Rewind, Forward)
integrated microphone for Voice over IP

Hi
The built-in microphone depends on the webcam.
As far as I know the Satellite A200-27R PSAE3E was not equipped with internal webcam and therefore the internal mic is not available.
Try to use an external headset with mic or only the single mic.
Regards

Microphone for voice over.

My standalone isight that I have used for voice overs has finally given up. (I'd developed a technique whereby I held the lens to my chin and pointed the isight down at about 45 degrees-but I digress) can anyone recommend a reasonable alternative, around $100 would be reasonable, I'm no pro but it has to be a reasonable quality.
I've bought and tried a microphone a day now for about a week and none match up to my experience with my old isight. I'd prefer one that needs to be close to the source sound so as background noise is not a huge problem and I'd also prefer it to be USB or firewire, I need to take on the guise of a ferret to get to the back of my mac.

I tried the logitech one from the  store, it didn't have the same quality as the isight but I could have lived with that I suppose as it wasn't as bad as some of the others I've tried. I don't know whether I got a faulty one, I don't think I did, because it seemed to work with Quicktime excepting the quality issue, but when I used it with FCE, it was awful.
Not sure if FCE has its own background noise cancelling feature that interfered with the background noise cancelling feature of the logitech but it was way to quiet 90% of the time and when it wasn't it was too loud, there was no middle ground. Overall too quiet, with odd words that were obviously said a little louder being clipped.

How to enter passcode using voice over accessibility

How do i enter my passcode using voice over accessibility?

Hello there, cathy555.
The following section of the iPhone User's Guide provides some good information on using Voice Over:
Use iPhone with VoiceOver - iPhone
http://help.apple.com/iphone/7/#/iph3e2e2329
Particularly:
Enter your passcode silently. To avoid having your passcode spoken as you enter it, use handwriting; see Write with your finger.
Enter your passcode silently. Set the rotor to Handwriting on the passcode screen, then write the characters of your passcode.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Access Point (AIR-CAP3702I-E-K9 ) 'sh ip interface ' output shows method is TFTP

Hi all
Ip interface brief , method TFTP
Access Point (AIR-CAP3702I-E-K9 ) 'sh ip interface ' output shows method is TFTP
Interface
IP-Address
OK?
Method
d Status
Protocol
BVI1
10.0.0.50
YES
TFTP
up
up
Dot11Radio0
unassigned
YES
unset
up
up
Dot11Radio0.28
unassigned
YES
unset
up
up
Dot11Radio0.85
unassigned
YES
unset
up
up
Dot11Radio0.250
unassigned
YES
unset
up
up
Dot11Radio1
unassigned
YES
unset
administratively
down down
GigabitEthernet0
unassigned
YES
TFTP
up
up
GigabitEthernet0.28
unassigned
YES
unset
up
up
GigabitEthernet0.85
unassigned
YES
unset
up
up
GigabitEthernet0.250
unassigned
YES
unset
up
up
Thank you

This tells us the configuration obtained via TFTP.
Does this AP get config via TFTP ?
HTH
Rasika
**** Pls rate all useful responses ****

Sountrack or Logic/Logic Express for voice over recording?

Hello,
I am wondering which software is best for voice over work? Sountrack or Logic/Logic Express?
Any input would be great. I would add the standard effects/filters to certain voice overs and add sound effects and music.
I have a midi/guitar and garage band is enough for me. I would not want to use Garageband as my software of choice for voice over work. I want markers and other more advanced tools?
Thanks,
Erik

Thanks for the answer.
I was looking at the Dialogue Tools in Sountrack and they appear to be perfect.
My main questrion is can record into Sountrack with a mic right? I have an m-audio saphire with a m-audio preamp.
I saw a demo of Soundtrack at NAB and all the effects looked perfect for voice over. I think Logic Studio is overkill but Sountrack and Logic Express( for my guitar) might be a perfect 1-2 punch. I will get Sountrack with The Final Cut Studio as I need video tools as well.
Thanks,
Erik

Config 2811 with NM-HDV-2E1-60 module for Voice over IP

Hi,
How should I config 2811 with NM-HDV-2E1-60 for voice over IP?
Which IOS I should use?
I can't define "Controller e1".
Can any one send me a configuration example file?
Tanx

Can you provide more info?
How are you trying to use this? Are you going to use this router as a CallManager express or in conjunction with CallManager server?
Can you provide a sh ver and sh run and a sh diag from your router? Do you have a design document of the set up that you have in mind?
Also please note that if you want to change the feature set of IOS that comes with the router, you need to purchase the software from Cisco, as you need to be able to upgrade to another IOS. This upgrade is not free.
Looking forward to hear more about your set up to be able to help you.
Regards,
Farbod

Sountrack or Logic/Logic Express for Voice Over work?

Hello,
I am wondering which software is best for voice over work? Sountrack or Logic/Logic Express?
Any input would be great. I would add the standard effects/filters to certain voice overs and add sound effects and music.
I have a midi/guitar and garage band is enough for me. I would not want to use Garageband as my software of choice for voice over work. I want markers and other more advanced tools?
Thanks,
Erik

Hi Erik,
I haven't used Logic or Logic Express, but I recently switched from Pro Tools to Soundtrack Pro 2. (I'm an independent producer/host for 2 weekly shows on Connecticut Public Radio.)
All I can say is this-- Soundtrack Pro has shaved hours off my Pro Tools workflow, is much more intuitive, and is (obviously) Mac-friendly, so I've been singing its praises ever since I made the switch.
In fact, I think Apple should be marketing it directly to radio stations!
Hope this helps,
Bruce
www,barberproductions.com
www.rlsguide.com

Garage Band for voice over

I would like to use garage band for Voice Over auditions. Would it be best to use "Create a Song" setting or "Podcast" to do this kind of work? Thank You in advance.

(Deleted since the question has moved to the GB3 forum)

Use of inline external mike for voice overs

Hand held microphones have insufficient volume for voice overs. Was told to buy the iMic. It does not help. Would a condenser mike, or a mixer give me amplification? The built in mike does not pick up female voices, etc.

The iMic should work OK ..it's essentially a USB input amplifier to let you plug in other audio input devices, such as any variety of mics.
Another mic on its own would not normally have sufficient power to give reasonable audio into your Mac, and a mixer would not be as efficient as an iMic (..or other USB input device). A condenser would generally be way too underpowered without an 'iMic' to boost it.
The early iVoice - similar to an iMic - didn't properly separate its own mic's audio from any other audio coming in through its little 3.5mm input socket, so I opened up mine and snipped the wire which connects them, so that it would use only its external mic socket ..and then plugged other mics into that. The more recent iVoice II works OK.
When you've attached one of these USB audio input devices, check your System Preferences>Sound, click on the 'Input' tab, and make sure that the USB device is selected and is working properly.

Proxy Setting for Multiple WiFi Access Points

I'm getting ready to roll out 30 iPads in a school setting. They are going to be on a cart that teachers will be able to check out for class use, but will be returned to the computer lab each evening. This creates a problem.
Throughout the building, we have several WiFi access points - next year we will have an access point in each classroom. And of course we connect through a proxy server so that the district can block various wbsites. As I am setting up my iPad to connect to each access point, I have to set the proxy server address for the access point; I would really like to be able to simply say "This is my proxy server address and port for EVERY WiFi access point in the building." and be done with it. I haven't been able to find a way to do this -- it looks like I have to configure each access point individually.
Am I just missing something (I hope)?

I suspect you have the D-Link set up to make its network an entirely new subnet using NAT.
If you setup the D-Link as a bridge to the network created by the Extreme, things may work properly.
You may need to refer to the D-Link documentation to find out the proper way to do this.

QoS for voice tagged traffic

I am trying to confirm my assumption that given voice traffic arriving at an AP or wireless bridge is already tagged with COS (and TOS) precedence, the wireless device will properly deal with it by default.
It appears from the documentation, but isn't explicitly stated, that the only QoS configuration required is to classify and tag (COS) packets. If they are tagged already, no configuration is required.
Is this correct?
Also, are COS precedence values preserved across a wireless bridge link, or must they be re-tagged at the far end?

Hi there,
in "Configuring QoS" of the Aironet 1310 Configuration Guide
http://www.cisco.com/en/US/products/ps5861/products_configuration_guide_chapter09186a00804ed713.html
it reads:
"Precedence of QoS Settings
When you enable QoS, the access point/bridge queues packets based on the Layer 2 class of service value for each packet. The access point/bridge applies QoS policies in this order:
1. Packets already classified—When the access point/bridge receives packets from a QoS-enabled switch or router that has already classified the packets with non-zero 802.1Q/P user_priority values, the access point/bridge uses that classification and does not apply other QoS policy rules to the packets. An existing classification takes precedence over all other policies on the access point/bridge.
Note Even if you have not configured a QoS policy, the access point always honors tagged 802.1P packets that it receives over the radio interface."
Hope this helps
Martin

Can a WS-PWR-PANEL be used for POE to Access Points?

We have an AP1010, AP1030, and an AIR-LAP-1232AG. Will they be able to use a WS-PWR-PANEL for POE?

Hi Richard,
The WS-PWR-PANEL only supports AP's with a single B-radio,so I think this will be problematic. Have a look;
Cisco Platforms and Daughter Cards
Access Point Compatibility Matrix
WS-PWR-PANEL
Cisco IPM Support - No
1130AG Series with 2 Radios - No
1200 Series with 2 Radios - No
All Access Points with 1 Radio - Yes (Only with 802.11b radio.)
From this doc;
Cisco Aironet Power Over Ethernet Application Note
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a008039e541.html#wp35628
The WS-PWR-PANEL is EOS/EOL as of May 25, 2006. Have a look at the migration options;
http://www.cisco.com/en/US/products/hw/modules/ps2797/prod_eol_notice0900aecd80380fa0.html
Hope this helps!
Rob
Please remember to rate helpful posts.......

QoS for voice over access point AIR-AP1242AG-A-K9

Similar Messages

Maybe you are looking for