QoS PM http error when logging in

Hi All,
I've recently installed QoS PM 4.1 on our CiscoWorks server and ran the install to upgrade CS from 3.1 to 3.2 and then the QoS install.
I am now unable to logon to Ciscoworks - get an http 400 error.
Tried stopping and starting the web server service and the tomcat servlet but no joy. Also stopped and started the Ciscoworks Daemon Manager.
Checked the version of LMS portal and we have 1.0.1 - is this compatible with QoS 4.1 and CS 3.2?
Thanks in advance

Hi Joe,
Thanks for your reply.
I uninstalled QoS PM but if I try and uninstall LMS I also need to uninstall CS which basically means uninstall everything?
Tried to upgrade LMS to 3.2 but this also fails when trying to do the Backup of Ciscoworks!
Slightly confused as to the best way to tackle this. Obviously can't remove CiscoWorks but also need to get it working again.
Regards

Similar Messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

I keep on getting an error when logging onto my whatapp telling me about connecting to itunes, Ive now backed up and restored but im still getting the same message connect ot itunes for push messages

Hello there, Minig1501.
The following Knowledge Base article has some information on the message you're receiving:
Unable to use Apple Push Notification service (APNs)
http://support.apple.com/kb/TS4264
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

Error when logging on (MSG_LOGIN_FAILURE)

Dear Friends,
                      I am configuring a SOAP TO RFC scenario.
1.)I have generated a WSDL file .while testing through the SOAP UI tool I am getting a empty response from SAP .
2) While debugging the application I found when i double click on the SENDER INTERFACE IN THE RECEIVER DETERMINATION in ID.
Its throwing a error saying:-
ERROR IN LOGGING:-
Details
Error when logging on (MSG_LOGIN_FAILURE)
MESSAGE ID: com.sap.aii.ib.gui.script.rb_all.MSG_LOGIN_FAILURE
STACKTRACE:
com.sap.aii.ib.gui.script.LoginException: Error when logging on
    at com.sap.aii.ib.gui.script.ScriptServer.open(ScriptServer.java:51)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
    at java.lang.reflect.Method.invoke(Unknown Source)
    at sun.rmi.server.UnicastServerRef.dispatch(Unknown Source)
    at sun.rmi.transport.Transport$1.run(Unknown Source)
    at java.security.AccessController.doPrivileged(Native Method)
    at sun.rmi.transport.Transport.serviceCall(Unknown Source)
    at sun.rmi.transport.tcp.TCPTransport.handleMessages(Unknown Source)
    at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(Unknown Source)
    at java.lang.Thread.run(Unknown Source)
    at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(Unknown Source)
    at sun.rmi.transport.StreamRemoteCall.executeCall(Unknown Source)
    at sun.rmi.server.UnicastRef.invoke(Unknown Source)
    at com.sap.aii.ib.gui.script.ScriptServer_Stub.open(Unknown Source)
    at com.sap.aii.ib.gui.script.ScriptClient$OpenRunnable.run(ScriptClient.java:75)
    at com.sap.aii.utilxi.misc.thread.ThreadPool$ThreadPoolThread.run(ThreadPool.java:321)
3)Is it due to this I am not getting response or something wrong in mapping:----
Please help !!!!
Thanks,
jeevan.

Hi,
>>>1.)I have generated a WSDL file .while testing through the SOAP UI tool I am getting a empty response
did you put the user/pass details in SOAP UI while executing the call?
you can do in the the SOAP UI attributes on the left and down corner
you need to put user and pass otherwise XI will not accept the call
Regards,
Michal Krawczyk

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

HTTP error when patchset 10.1.3.3 applied on 10.1.3.1

I have tried installing OAS 10.1.3.3 last 6 times and have given up. The only thing which I get consistently is this error :
08/03/14 21:56:38 Start process
Syntax error on line 278 of d:/product/10.1.3.1/oracleas/apache/apache/conf/httpd.conf:
Cannot load d:/product/10.1.3.1/oracleas/apache/apache/modules/apachemoduleossl.dll into server: (127) The specified procedure could not be found:
This is the step which I have followed:
1) Installed 10.1.3.1 in advanced mode. in D:\product\10.1.3.1\OracleAS
2) Please note at this time, all systems work fine. The Home instance is up and http is running on 80,7200 and https: 443
3) Install patch 10.1.3.3 on this (all the above mentioned server are up and running)
4) now it throws this exception and HTTP server does not start hence rendering the application useless.
I have tried everything in my power to rectify this issue including installing on C drive, D Drive different folder ... restarting 10.1.3.1 server after installation have admitted defeat.
This is a distres call for help.

Hi,
Same problem here, even if I install a new Opatch version before upgrading to 10.1.3.3.
First I installed 10.1.3.0.0 and then opatch 1.0.0.0.58 (latest release of opatch, see to metalink note 461637.1).
After that I get the same HTTP error when applying patset 10.1.3.3.
I found a warning of Chris Slattery concerning opatch 1.0.0.0.58 (warning : new 1.0.0.58 opatch issues on 10.1.3.3. ias patch I am completely deinstalling and will try his solution. Maybe this helps also for the httpserver error.
Any other ideas are welcome!
Kind regards,
els

Error when logging into account

I'm getting an error when trying to log in to my account.
I had 3 hard drives in my Mac and removed 2 of them and wiped/installed into another computer.
I still have the hard drive with OSX on it installed, but when I try to log into my account it says there is an error. I'm able to log into the Admin account, but not the one I used regularly.
I would like to recover some files I had on the desktop. Any way to do this?

While logged on as Admin, I go to OSX/Applications > Users > Brent > Desktop > Get Info > Permissions for Shared are Read/Write. All selections within the Brent folder have a red circle next to them - If I try to access them, it says the folder can't be opened because I don't have sufficient access privileges.
[IMG]http://img191.imageshack.us/img191/1039/picture3hs.png[/IMG]
[IMG]http://img215.imageshack.us/img215/7302/picture4ub.png[/IMG]
[IMG]http://img405.imageshack.us/img405/2796/picture5oh.png[/IMG]
[IMG]http://img683.imageshack.us/img683/4117/picture6zd.png[/IMG]

Patching: HTTP errors when downloading blobs from proxy controller to agent

Hi all,
I have a persistent issue which I can't figure out. Oracle support aren't much help.
When applying a Recommended Baseline patchset to our managed Solaris 10 servers, I have observed that blobs are downloaded to the target servers at a rate of 1-2 blobs per minute. I consider this to be quite slow, but that's not my main problem.
At some point during the blob downloads, http errors start appearing in /var/scn/update-agent/logs/error.log on the target server....
HTTP request failed. Reason: Moved temporarily.
HTTP request failed. Reason: Bad gateway.
Eventually, the blob download job fails completely...
118099456 Download aborted.
Our servers are quite a way behind in their patching levels. Consequently, we often need to apply as many as 200 patches to a single server. We are lucky to download 100 patches (blobs) before the http errors begin.
The errors would seem to indicate that the http servers on the proxy controllers are refusing any further connections midway through the blob downloads. I have tried tweaking the httpd.conf file on the proxy controllers - increased the number of httpd processes running and increased MaxClients to 100. None of this has helped.
The proxy controllers have interfaces on the same subnet as the target servers. Network performance between proxy and asset is good.
Has anyone else experienced similar issues with patching ?
Does anyone have any suggestions for httpd.conf settings on the Proxy Controllers ?
Cheers,
Graham

So I have figured out the issue and as Eddie mentioned it is because the email attribute is not synced. For some reason when I go into Manage User Profiles I am unable to edit anything, i.e. I cannot add the email address.
I am able to create a whole new user, which I did (already existed in AD) and of course included the email attribute. When I sign into sharepoint with this user I am then able to view IRM protected documents.
I cannot figure out why the email attribute is not synced to SP. As mentioned above it seems the UPS does not work in a standalone SP install, but my undesrtanding is that when i sign into SP it is going to AD to autheticate, so why then does it not
also retrieve the email attribute as well?
I created an SharePoint Active Directory Import job, it runs successfully, it imports all my users from AD, but again without the eamil attribute! Very strange. If anyone has any clues I am all ears.

Why is there a server error when logging onto icloud?

When logging onto my icloud account on my pc, it said server error. I'm using the correct id and password, but it still wont work.

Hey ral18,
Thanks for using Apple Support Communities.
Follow these articles to troubleshoot the issue you ar getting when using your iCloud account.
Make sure you are able to sign in to iCloud.com.
iCloud: Account troubleshooting
http://support.apple.com/kb/ts3988
iCloud: If you can’t sign in to iCloud.com
http://support.apple.com/kb/ph2611
Have a nice day,
Mario

Errors when logging onto NWBC

I have two issues when logging into NWBC.
I'm connecting to my ECC DEV environment using http://myserver:8010/sap/bc/nwbc
when I first connect I get a message about an expired certificate
I'm not sure where to find this certificate to update the valid to date....
Then after saying yes... I get this error...
I've tried changing the Custom level in my internet options to allow mixed content - but it still gives this error message.
Any ideas?
Thanks!

Shane
This is actually an IE browser security certificate handling issue. What to do next would depends on how your corporate security team set up your certificate store ...
But if you want to give it a go -- try to install the certificate yourself into your own IE browser (that's assuming that the certificate is something that you trust) ...
To do so
-Click on the [Yes] and then proceed to install the certificate manually into your desktop.
-The certificate need to be stored in your Root Certificate directory. If you do NOT know where it's, try scanning your desktop for the file *.crt or Using the Windows Start Button to Run the program certmgr.msc
Note:
HTH

HTTP error when trying to access RESTful web service from application

Hi,
We are getting the following error when trying to access a RESTful web service coming from Apex workspace 4.2.1 and Apex listener 2.1:
ORA-29273: HTTP request failed ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-29024: Certificate validation failure
In the Debug report, besides the above I also see:
error_backtrace: ORA-06512: at "SYS.UTL_HTTP", line 1130 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 543 ORA-06512: at "APEX_040200.WWV_FLOW_WEB_SERVICES", line 1164 ORA-06512: at "APEX_040200.WWV_FLOW_PROCESS", line 396
We get that error whether we use https or http in the URI pointing to the web service. When I test the Web Service in Workspace RESTful service GUI, I get the data back. When I go build an application with a report calling the RESTful Web Service I get that error. Both the Application and the Workspace RESTful services are on the same Apex environment and even the same workspace.
What is odd is that I can actually put the URL of the web service into a browser and I get the data: (using the demo hr data in sample RESTful services.)
IN browser-- https://weblogic-dev.edu/apex/ace/hr/empinfo/
yields:
7839,KING,PRESIDENT,,1981-11-17T05:00:00Z,5000,,10 7698,BLAKE,MANAGER,7839,1981-05-01T04:00:00Z,2850,,30 7782,CLARK,MANAGER,7839,1981-06-09T04:00:00Z,2450,,10 7566,JONES,MANAGER,7839,1981-04-02T05:00:00Z,2975,,20 7788,SCOTT,ANALYST,7566,1982-12-09T05:00:00Z,3000,,20 7902,FORD,ANALYST,7566,1981-12-03T05:00:00Z,3000,,20 7369,SMITH,CLERK,7902,1980-12-17T05:00:00Z,800,,20 7499,ALLEN,SALESMAN,7698,1981-02-20T05:00:00Z,1600,300,30 7521,WARD,SALESMAN,7698,1981-02-22T05:00:00Z,1250,500,30 7654,MARTIN,SALESMAN,7698,1981-09-28T04:00:00Z,1250,1400,30 7844,TURNER,SALESMAN,7698,1981-09-08T04:00:00Z,1500,0,30 7876,ADAMS,CLERK,7788,1983-01-12T05:00:00Z,1100,,20 7900,JAMES,CLERK,7698,1981-12-03T05:00:00Z,950,,30 7934,MILLER,CLERK,7782,1982-01-23T05:00:00Z,1300,,10
Any ideas on what would be causing the Error above in our application?
Thanks,
Pat
Edited by: patfmnd on Mar 11, 2013 3:25 PM
In reviewing the above error, I think we are realizing that we have to have the Weblogic layer SSL cert (actually the CERT from our BigIP load balancer which also does our SSL termination) imported into the Oracle server wallet where Apex is installed. Am I correct?
PM

We resolved our problem. The Apex Administrative Guide made us realize that we had to set up Wallet path in the Instance. This required working with DBAs to follow the Advanced networking guide to get the wallet set up on our server. We then added that path to the Instance configuration. (Manager Instance --> Instance settings). We ran into another other issue related to our implementation of CAS but were able to resolve that, and 'voila' were able to get the sample RESTful service consumed by our application!!
Now to the task of figuring out how to get Basic Auth working between client application and RESTful web service. If anyone has that working, let us know!!
It would be helpful if in the documentation of the Apex 2.x listener or Apex install/configuration there was clear reference to the above steps required for HTTPS access to RESTful web services.
Pat

Why do I get server error when logging into Icloud on my pc

Why do i get server error when i try to log into icloud control panel on my pc

document.write(''); document.cookie = 'CTINC=1; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'SiteStamp=XXDtZ12Ou3WtAF; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'Persistent_id_XXDtZ12Ou3WtAF=0BD14F766ACA:1318308966; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/';

I receive an error when logging in in Adobe Line

When logging in with my Adobe ID in Adobe Line, I receive an error seemingly unrelated to my authentication credentials. The error reads:
"There was an error with this action. Try again later
<a long alphanumeric string which changes with each failed attempt>"
I can successfully login to adobe.com with my Adobe ID and password.
I have tried force quitting the app, restarting my iPad, and uninstalling and reinstalling Adobe Line. The issue has persisted.

I've not received any direct contact from Adobe. I've tried resetting my password for my Adobe ID, but that has not solved the issue. I've checked for updates to Adobe Line on the app store, but there have been none.

Find My Friends - Server Error when logging in

I have been using Find My Friends on my iPad4 and iPhone5 for about a month but now I am getting either an error suggesting my Apple ID password is wrong, which it isn't or I wouldn't get to post on here - plus I have checked via appleid web portal.
Currently it says "Find My Friends Alert - Find My Friends is unavailable due to a server error."
However, my friends are logged into their iPads and iPhones using the service without a problem.
Any ideas?

Solving Find my Friends Alert "Find my Friends is unavailable due to a server error, is actually caused by how you have logged onto Apple - I have found.
This seems to be a common thread that stems from before Apple introduced email. At that time I first created an Apple identity for the 3GS, it was using the email address I already had. On subsequent iPhone hardware and software upgrades that introduced Apple based email, like @me.com and latterly iCloud, logging onto an updated software version you are invited to use the Apple based identities which you invariably do. This can be a mistake as original Apps are linked to the core identity based on the original one that first set up, and unless this is used then some Apps like Find Friends give misleading error messages like Cannot find Server, or Server error, when the problem is how you have logged on.
Merging those multiple identities would be a solution, but one that I haven't yet found.

Error when logging into forum

Past few days get error when trying to login to forum. An error occurred during a connection to pingsso.lithium.com. SSL received a weak ephemeral Diffie-Hellman key in Server Key Exchange handshake message. (Error code: ssl_error_weak_server_ephemeral_dh_key)     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.  Error in Firefox, but works OK in IE. What should be done to fix this in Firefox? In Firefox I can't even get to this page to type a question. Had to go to IE to be able to submit the question. What should be done to fix this in Firefox?

Clear your entire browser history including "cookies". I'd bet that will solve your issue.
ssjazz wrote:
Past few days get error when trying to login to forum. An error occurred during a connection to pingsso.lithium.com. SSL received a weak ephemeral Diffie-Hellman key in Server Key Exchange handshake message. (Error code: ssl_error_weak_server_ephemeral_dh_key)     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.  Error in Firefox, but works OK in IE. What should be done to fix this in Firefox? In Firefox I can't even get to this page to type a question. Had to go to IE to be able to submit the question. What should be done to fix this in Firefox?

Windows 2k8R2 - Receiving Error when logging in ( MMC Cannot open the File: C:\Windows\system32\ServerManager.msc)

Windows 2008 R2 - I just started receiving this when i log in, and also when i try to manage the machine:
MMC Cannot open the File:
C:\Windows\system32\ServerManager.msc
This may be because the file does not exist , is not an MMC console , or was created by a later version of MMC. This may also be be because you do not have sufficient access rights to the file.
This always worked before, and works for other users just not me on this particular box. This is a production box and i need a resolution quick please. Thanks in advance.
PM

Has the system update readiness tool been run without error?
http://windows.microsoft.com/en-US/windows7/What-is-the-System-Update-Readiness-Tool
Then check the %SYSTEMROOT%\Logs\CBS\CheckSUR.log file for errors.
You can also try creating a new MSC
Start|Run|"mmc"|File|Add/Remove|Server Manager|Add|Local|OK|OK|File|Save As
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

QoS PM http error when logging in

Similar Messages

Maybe you are looking for