QoS value for http traffic from IP Phone
Since the phone marks all voice with COS 5 and data traffic with COS 0. Does this also include traffic sourced from the IP Phone http? request when doing Directory Lookups, IP Phone Services.
Thanks!
With 4.1 and up (not sure if 4.0 had this), this traffic is marked with TOS 3 or DSCP CS3 (24). You can modify this enterprise parameter to what ever you want.
DSCP for SCCP Phone-based Services :
This parameter specifies the Differentiated Service Code Point (DSCP) IP classification for IP phone services on SCCP-based phones, including any HTTP traffic. Note: You must restart SCCP-based phones for this parameter change to take effect.
This is a required field.
Default: default DSCP (000000).
Restart SCCP-based phones for the parameter change to take effect.
HTH
Sankar
PS: please remember to rate posts!
Similar Messages
-
Debugging HTTP traffic from iPad with Charles
Here's a great tip on how to use Charles on your Mac or PC to proxy HTTP traffic from your iPad so you can debug it.
http://www.ravelrumba.com/blog/ipad-http-debugging/Talking of debugging iPad, and Flash apps specifically, I only recently tried out the "Quick publishing for device debugging" option. When you do that, and run the app on the device, you can set Flash to be in a remote debugging session, and on the app screen you type in the IP address of your computer. You can then debug the running app in just the same way you would debug a swf running in your desktop browser. You don't even have to be connected by USB, it works across the wireless network.
-
Abort Could not determine a value for variable 0DAT from the authorizations
Hi All,
I encountered an error '/ Abort Could not determine a value for variable 0DAT from the authorizations\' when executing my query on a multiprovider in BW 3.5.
Can anyone help me in finding a solutionn to this issue.
Thanks,
Kartik.Hi Kartik,
I am sorry as that note is for NW2004s. Please check if 0DAT variable installed from a business content? if not then I think thats the cause of the problem.
Hope this helps,
Bye... -
Dear S&OP community,
I am getting following error while creating a planning ares in a newly installed sandbox. "Enter values for planning horizon From and planning horizon To for the storage time profile level".
This what I did...
1) Created new attributes and master data objects and activated them successfully.
2) Time profile created and activated successfully
3) Trying to create planing area by assigning time profile in step 2 and assigned master data from step1..Unable to save the data and system returns
this error - "Enter values for planning horizon From and planning horizon To for the storage time profile level"
My understanding is time profile needs to be active but doesn't have to have values...
Any help is appreciated.
Thanks,
KrishnaYS,
Here are my time profile settings
Level Name Display Horizon - Past Display Horizon - Future
1 Monthly -6 11
2 Quarterly -2 3
3 Yearly -1 2
Time profile is active and but time profile data is not loaded
Thanks,
Krishna -
I want to buy an app for a gift, from i phone is it possible?
i want to buy an app for a gift, from i phone is it possible?
I am able to Gift an App from my iPad and assume it would work similarly on an iPhone. I go into the App detail and at the top right there is an option to "Gift this App". Is this what you want to do? Once you pay for it, It sends a redemption code to the email address of the recipient. They click on it and it installs the app.
-
Abort Couldn't determine the value for 0P-KEYD2 from Authorizations
Hi All,
When attempting to open a query, i'm encoutered with an error like "Abort Could not determine a value for variable 0P_KEYD2 from the authorisations".
Last month it was working fine, and working fine in Quality enviroment also.
If anyone come across such situation or any ideas, Please help me out in this regard.
Awaiting to see replies for this.
Regards,
PRK.Dear PRK,
I'm facing exactly the the same problem - which solution did you finally find.
Regards,
Axel -
What is the recommenden access port QoS configuration for 8900/9900 video enabled phones
Hi all,
we are currently starting to roll out some video enabled 9900 and 8900 phones in our network. In the past we did not use video and configured the access ports on our Catalyst 2960 switches with "auto qos voip ciscp-phone". This however creates a policy which does not include a class-map to correctly handle the AF41 video traffic coming from those phones. I have thougth about extending the autoqos policy with a AF41 class-map but am not sure if this is the right way to do it.
That's what I have in mind:
class-map match-all AUTOQOS_VIDEO_DATA_CLASS
match ip dscp af41
class-map match-all AUTOQOS_VOIP_DATA_CLASS
match ip dscp ef
class-map match-all AUTOQOS_DEFAULT_CLASS
match access-group name AUTOQOS-ACL-DEFAULT
class-map match-all AUTOQOS_VOIP_SIGNAL_CLASS
match ip dscp cs3
policy-map AUTOQOS-SRND4-CISCOPHONE-POLICY
class AUTOQOS_VOIP_DATA_CLASS
set dscp ef
police 128000 8000 exceed-action policed-dscp-transmit
class AUTOQOS_VIDEO_DATA_CLASS
set dscp af41
police 1500000 8000 exceed-action policed-dscp-transmit
class AUTOQOS_VOIP_SIGNAL_CLASS
set dscp cs3
police 32000 8000 exceed-action policed-dscp-transmit
class AUTOQOS_DEFAULT_CLASS
set dscp default
police 10000000 8000 exceed-action policed-dscp-transmit
How do you guys do it ? Is there some documentation for this ?
Thank you for your kind help
best regards
AndreasHi
You have to keep this table on your mind. Your configuration is fine if your configuration for SD video , but if for HD video , it is not ok you have to change video bandwidth at least 5M.
Traffic Type
Layer 2 CoS
Layer 3 IP Precedence
Layer 3 DSCP
Voice RTP1
5
5
EF
Voice control
3
3
AF31
Video conference
4
4
AF41
Streaming video (IP/TV)
1
1
AF13
Data
0-2
0-2
0-AF23
*Interactive Video "AF41"- Sensitive but can tolerate packet loss of about 1% and latency almost same as voice.
*Streaming Video "AF13" - Less sensitive - can tolerate about 4-5% packet loss and latency of about 4-5 seconds.
*HD video conference will require between 5M to 16M , but SD video conference will use 384K to 1 M
Note:-Video QOS , if you will assume that your video conference will use around 384K , you have to add 20% because video conference include voice so the total bandwidth 460K.
Kindly check the below link
http://www.sdcug.com/wp-content/uploads/2011/04/Campus-QoS-for-Voice-and-Video.pdf
Thanks
please rate all useful information -
Kerberos encryption for HTTP traffic
Hello
I am writing client for WinRM service(Windows Vista). This service use SOAP protocol for communication.
And I cannot make subscription for Windows events using Push method.
The issue is when I try to make events subscription - Vista tries to test connection with my server, but I don't know what should I send back for test connection request to Vista WinRM... :(
I didn't find it in MSDN.
Subscription request is:
<?xml version="1.0" encoding="UTF-8"?>
<env:Envelope xmlns:a="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:e="http://schemas.xmlsoap.org/ws/2004/08/eventing" xmlns:env="http://www.w3.org/2003/05/soap-envelope" xmlns:ew="http://www.example.com/warnings'" xmlns:n="http://schemas.xmlsoap.org/ws/2004/09/enumeration" xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:w="http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd" xmlns:x="http://www.w3.org/2001/XMLSchema">
<env:Header>
<a:To s:mustUnderstand="true">HTTP://winrmcient:80/wsman/</a:To>
<w:ResourceURI>http://schemas.microsoft.com/wbem/wsman/1/windows/EventLog</w:ResourceURI>
<a:Action s:mustUnderstand="true">http://schemas.xmlsoap.org/ws/2004/08/eventing/Subscribe</a:Action>
<a:MessageID s:mustUnderstand="true">uuid:a4b86ede-32d0-4a28-91f5-bc8f36bfca22</a:MessageID>
<a:ReplyTo>
<a:Address s:mustUnderstand="true">http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</a:Address>
</a:ReplyTo>
<w:MaxEnvelopeSize>262144</w:MaxEnvelopeSize>
<w:Locale xml:lang="en-US"/>
<w:OperationTimeout>PT5M0.000S</w:OperationTimeout>
<w:OptionSet>
<w:Option Name="ReadExistingEvents" mustComply="false"/>
<w:Option Name="ContentFormat">RenderedText</w:Option>
</w:OptionSet>
</env:Header>
<env:Body>
<e:Subscribe>
<e:Delivery e:Mode="http://schemas.xmlsoap.org/ws/2004/08/eventing/DeliveryModes/Push">
<e:NotifyTo>
<a:Address>http://Antares:443</a:Address>
</e:NotifyTo>
</e:Delivery>
<e:Expires>PT12H0M0.000S</e:Expires>
<w:Filter>
<QueryList>
<Query Path="Security">
<Select>*</Select>
</Query>
<Query Path="System">
<Select>*</Select>
</Query>
<Query Path="Application">
<Select>*</Select>
</Query>
</QueryList>
</w:Filter>
<w:SendBookmarks/>
</e:Subscribe>
</env:Body>
</env:Envelope>
WinRM connection test request is request with empty content length and with header:
Host=[Antares:443], Content-type=[application/soap+xml;charset=UTF-16], Content-length=[0], Connection=[Keep-Alive], Authorization=[Kerberos 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], User-agent=[Microsoft WinRM Client]
I tried to send empty response(with the same test request header) for test request but it doesn't take any effect.
WinRM subscription response is:
<?xml version="1.0" encoding="UTF-8"?>
<s:Envelope xmlns:a="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:e="http://schemas.xmlsoap.org/ws/2004/08/eventing" xmlns:n="http://schemas.xmlsoap.org/ws/2004/09/enumeration" xmlns:s="http://www.w3.org/2003/05/soap-envelope" xmlns:w="http://schemas.dmtf.org/wbem/wsman/1/wsman.xsd" xmlns:x="http://schemas.xmlsoap.org/ws/2004/09/transfer" xml:lang="en-US">
<s:Header>
<a:Action>http://schemas.xmlsoap.org/ws/2004/08/eventing/fault</a:Action>
<a:MessageID>uuid:B83898C7-9F93-4E7A-8C8C-B72C7D189908</a:MessageID>
<a:To>http://schemas.xmlsoap.org/ws/2004/08/addressing/role/anonymous</a:To>
<a:RelatesTo>uuid:a4b86ede-32d0-4a28-91f5-bc8f36bfca22</a:RelatesTo>
</s:Header>
<s:Body>
<s:Fault>
<env:Code xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<s:Value>s:Sender</s:Value>
<s:Subcode>
<s:Value>e:EventSourceUnableToProcess</s:Value>
</s:Subcode>
</env:Code>
<env:Reason xmlns:env="http://www.w3.org/2003/05/soap-envelope">
<s:Text xml:lang="en-US">The connectivity test from the push subscription source to the client failed. This can happen if the client machine initiating the push subscription is unreachable from the server machine where the event source is located. Possible reasons include firewall or some other network boundary. Modify subscription to use Pull based subscription. </s:Text>
</env:Reason>
<s:Detail>
<w:FaultDetail>http://schemas.dmtf.org/wbem/wsman/1/wsman/faultDetail/UnusableAddress</w:FaultDetail>
<f:WSManFault xmlns:f="http://schemas.microsoft.com/wbem/wsman/1/wsmanfault" Code="2150858901" Machine="">
<f:Message>The connectivity test from the push subscription source to the client failed. This can happen if the client machine initiating the push subscription is unreachable from the server machine where the event source is located. Possible reasons include firewall or some other network boundary. Modify subscription to use Pull based subscription. </f:Message>
</f:WSManFault>
</s:Detail>
</s:Fault>
</s:Body>
</s:Envelope>
In WinRM documentation I see:
+Note: HTTP traffic by default only allows messages encrypted with
the Negotiate or Kerberos SSP.+
But I use simple java HttpConnection and there are no any references to Kerberos in JavaDoc for this class... :(
One more - I use BASIC authentication.
Does anybody know what should I send back for connection test request.Sorry, I forgot to set "java.security.krb5.conf" and "java.security.auth.login.config" properties.
But after I set these properties I've got another exception:
GSSException: No valid credentials provided (Mechanism level: Attempt to obtain new ACCEPT credentials failed!)
at sun.security.jgss.krb5.Krb5AcceptCredential.getInstance(Krb5AcceptCredential.java:87)
at sun.security.jgss.krb5.Krb5MechFactory.getCredentialElement(Krb5MechFactory.java:111)
at sun.security.jgss.GSSManagerImpl.getCredentialElement(GSSManagerImpl.java:178)
at sun.security.jgss.spnego.SpNegoMechFactory.getCredentialElement(SpNegoMechFactory.java:109)
at sun.security.jgss.GSSManagerImpl.getCredentialElement(GSSManagerImpl.java:178)
at sun.security.jgss.GSSCredentialImpl.add(GSSCredentialImpl.java:384)
at sun.security.jgss.GSSCredentialImpl.<init>(GSSCredentialImpl.java:42)
at sun.security.jgss.GSSManagerImpl.createCredential(GSSManagerImpl.java:139)
at com.symantec.cas.ucf.sensors.ws_management.WSServer.start(WSServer.java:132)
Caused by: javax.security.auth.login.LoginException: No LoginModules configured for
at javax.security.auth.login.LoginContext.init(LoginContext.java:256)
at javax.security.auth.login.LoginContext.<init>(LoginContext.java:499)
at sun.security.jgss.GSSUtil.login(GSSUtil.java:244)
at sun.security.jgss.krb5.Krb5Util.getKeys(Krb5Util.java:185)
at sun.security.jgss.krb5.Krb5AcceptCredential$1.run(Krb5AcceptCredential.java:82)
at java.security.AccessController.doPrivileged(Native Method)
at sun.security.jgss.krb5.Krb5AcceptCredential.getInstance(Krb5AcceptCredential.java:79)
... 28 more
But it seems to me that I've set login module correctly:
com.sun.security.jgss.krb5.initiate {
com.sun.security.auth.module.Krb5LoginModule required doNotPrompt=false useTicketCache=false;
May be I missed something...
What do yo think about it ? -
Passing a value for date parameter from Oracle Forms to BIP
Hi
I have created a report with the following SQL query:
select
d_tables.d_seq,
to_date(d_tables.d_created) creation_date,
d_tables.d_created_by created_by,
d_tables.d_pk,
d_tables.table_name,
d_tables.comments
from
d_tables, d_applications
where
d_tables.d_ppk = d_applications.d_pk
and to_date(d_tables.d_created) >= nvl(:P_CRE_DATE_FROM, to_date(d_tables.d_created))
and to_date(d_tables.d_created) <= nvl(:P_CRE_DATE_TO, to_date(d_tables.d_created))
The parameters P_CRE_DATE_FROM and P_CRE_DATE_TO have been set up as date in BI Publisher with format dd-MMM-yyyy
The report works fine when launched in BI Publisher.
I want to call this report from Oracle Forms and I'm trying to pass the values for both the parameters. However, the report does not generate output based on values passed.
Does it have to do with datatype? Does anyone know a solution for this?
Kind regards,
AparnaThanks for your suggestion. I am already referring to the whitepaper and have integrated Forms with BI Publisher. The parameter passing is working fine for a varchar2 type of parameter. However, for a date type, there seems to be some problem.
-
Is there a way to turn on the mobile hot spot function for a day from the phone?
I have an unlimited data plan. It costs $30 a month to add the mobile hot spot feature which I only need a day or two a month. I know that it can be turned on and off via Custom Service and that I would only pay for the time it was on at roughly $1.00/day. Unfortunately, going through custom service is time consuming. Ideally I would like an app that lets me turn the mobile hot spot feature on and off from the phone.
There are two components to a mobile hot spot. First you need to active the feature through customer service at which point billing starts and then you need to enable it on the phone. The problem is activating and deactiving the feature.
Is there an app to do this?FWIW, I'd love to turn off passcodes *permanently* on my five iOS devices running iOS 8.1.
Is this possible anymore?
So far, iOS 8.1 insists (after awhile) that I *must* re-implement a passcode.
(FWIW, with iOS 7 I could turn off passcodes permanently, sending iPads to sales prospects secure in the knowledge they could easily operate the iPad over the course of several weeks, reviewing media devoted to their projects, and not finding themselves locked out.)
Advice much appreciated. -
Cookie persistence for HTTP traffic
hello,
i have the following situation: on an 11506, clients connects to VIP on port 80, this VIP maps to port 7777 on 2 services. The objective is to configure cookie persistence for http. The cookie persistence should be for URI /thestring/
I have used
advanced-balance cookies
string prefix "/thestring/"
in the content rule and it did not work.
Does this have anything to do with the port changing from 80 to 7777, or am i missing something for cookie persistence?
Regards
Bassamthx for you reply; still it sometimes work and sometimes dont
my service config:
service ebizsso1
keepalive frequency 3
keepalive port 7777
ip address 10.10.230.82
port 7777
protocol tcp
string /oiddas/
active
my content rule
content ebizsso-servers
add service ebizsso1
vip address 10.10.231.9
protocol tcp
port 80
advanced-balance cookieurl
string prefix "/oiddas/"
active
is this is the required?
thank you
bassam -
Hide all members' value for specify date from CUBE level
Hi There,<o:p></o:p>
With my current CUBE data available for yesterday, but 2-5 % data also get loaded through ETL for today as it's live data feed and process all data
at CUBE level.<o:p></o:p>
Now problem here till yesterday all data are okay and that make send to end user, but chunk of data for today (2-5 %) don’t make any sense…. now question
here is any way I can hide value for all members for today which is (2-5 %) only, that way data visible from CUBE level only till yesterday.<o:p></o:p>
Exactly what I mean if anyone connect to my CUBE they can only see data till yesterday (day-1), but not for today.<o:p></o:p>
Regards,<o:p></o:p>
Nagen<o:p></o:p>
Thanks, NagenHi,
two possibilities:
1) Create a security implementation, so that the users are allowed to see the data until yesterday. Dimension Security on your Date Dimension)
2) Scope the Dimension Member for future Dates to NULL
Kr Jürgen -
How to bind values for input parameters from an adf table?
Hi,
The version I am using is
Jdev TP4 11.1.1.0.0
I need to know how to bind values for input parameters to methods.
I have created an af:table and I have a button created using a method which is outside the af:table. This method needs to take input parameter values from the column values in the table.
When I have an adf form instead of the table the binding works.
Any help?
Thanks.Hi Balaji,
you need to bind you table to a backing bean and call a method in the backing bean when you hit the button. In the method you get the selected row from the table and have access to the columns of it. Then call the the method with the parameters.
To bind the table to a bean select the properties of the table, go to behavior section and look for the advanced section 'Binding' property.
Select the small down arrow at the right side and click edit. In the dialog select or create a bean and property for the table.
Go to the button properties, look for 'Action', again select the small down arrow and click 'Edit'. Select the bean which holds the table property and create a method for the button.
The method look like public void bearbeitenQuelle(ActionEvent actionEvent)
// Add event code here...
RichTable lTable = getYourTable();
Object lData = lTable.getSelectedRowData();
FacesCtrlHierNodeBinding lNB = (FacesCtrlHierNodeBinding) lData;
YourViewRow lRow = (YourViewRow ) lNB.getCurrentRow();
}Hope the get you started
Timo -
How to find out when I am eligible for an upgrade from my phone?
I am not the account primary account owner, my mom is. I live 300 miles from her and she doesn't know how to check it. I know there is a way to find out from my phone when I am eligible for an upgrade to a new phone. I have done it in the past, but can't figure it out anymore. Can someone please help me and tell me what to push to find this out. I know it is # or * and then 3 or 4 numbers.
THANKS!!!!#UPG or # 874 to get your upgrade date. You'll be sent a free text message with the date.
-
How to get an Net asset value for the Equipment from ERP in to BI
Hi
I am extracting the data from CRM to BI about the De installation information like
Planned date of de installation, contract end date etc . But Ineed to extract Asset net value for that equipement. I think asset value should be extracyed from ERP but I dont know which tables and datsource stores
Thanks,
SudhaIf you want the main tables within Assets :
FI-AA-AA (AA) Asset Accounting: Basic Functions u2013 Master Data
ANKA Asset Classes: General Data ANLKL
ANKP Asset Classes: Fld Cont Dpndnt on Chart ANLKL / AFAPL
of Depreciation
ANKT Asset Classes: Description SPRAS / ANLKL
ANKV Asset Classes: Insurance Types ANLKL / VRSLFD
ANLA Asset Master Record Segment BUKRS / ANLN1 / ANLN2
ANLB Depreciation Terms BUKRS / ANLN1 / ANLN2 / AFABE
/ BDATU
ANLT Asset Texts SPRAS / BUKRS / ANLN1 / ANLN2
ANLU Asset Master Record User Fields .INCLUDE / BUKRS / ANLN1 / ANLN2
ANLW Insurable Values (Year Dependent) BUKRS / ANLN1 / ANLN2 / VRSLFD /
GJAHR
ANLX Asset Master Record Segment BUKRS / ANLN1 / ANLN2
ANLZ Time Dependent Asset Allocations BUKRS / ANLN1 / ANLN2 / BDATU
FI-AA-AA (AA2) Asset Accounting: Basic Functions u2013 Master Data 2.0
ANAR Asset Types ANLAR
ANAT Asset Type Text SPRAS / ANLAR
FI-AA-AA (AB) Asset Accounting: Basic Functions u2013
Asset Accounting
ANEK Document Header Asset Posting BUKRS / ANLN1 / ANLN2 / GJAHR /
LNRAN
ANEP Asset Line Items BUKRS / ANLN1 / ANLN2 / GJAHR /
LNRAN / AFABE
ANEV Asset Downpymt Settlement BUKRS / ANLN1 / ANLN2 / GJAHR /
LNRANS
ANKB Asset Class: Depreciation Area ANLKL / AFAPL / AFABE / BDATU
ANLC Asset value Fields BUKRS / ANLN1 / ANLN2 / GJAHR /
AFABE
ANLH Main Asset Number BUKRS / ANLN1
ANLP Asset Periodic Values BUKRS / GJAHR / PERAF / AFBNR /
ANLN1 / ANLN2 / AFABER
FI-SL-VSR (GVAL) Special Purpose Ledger: Validation, Substitution and Rules
GB03 Validation / Substitution User VALUSER
GB92 Substitutions SUBSTID
GB93 Validation VALID
Maybe you are looking for
-
Recording from LPs, cassettes, CDs, radio, VCR, etc.
My iMac finally died after six years of service, and I replaced it with a MacBook. I think I have made a mistake in buying a laptop (For one thing, I hate the keyboard), but I'll just have to make the best of it. Anyway, I need to learn how to transf
-
Help! need to re-do word files back to pdf
I need to re-convert my word doc's BACK to PDF's.....HELP!
-
Best way to load in Excel script for cRIO (streaming​?)
Right now my program reads from an excel file to create custom tests to be performed by the cRIO. I insist on excel being the input method since it is easy for non-programmers to use and manipulate. The excel files are simple. A String that descr
-
Document splitting generate lines with alternative +/- signs-- GLT0002
Hello Gurus, Can anybody please help in this case. The user is trying to clear the GL account by F-03,but is unable to go ahead as the error is given by the system. We are working on ECC 5.0 and with service pack 16 upgrade in place. The OSS note (no
-
Creating query with a criteria(constraint) on amount more than x dollars
Hi experts, I have an user requirement where I want to see all the transactions for a particular GL account range (expenditures) which were above 5000 dollars. I am using the new GL cube and ods. How can I define like this query, can we have such a v