Qosimio G30-116 with blue screen on boot

I have a Qosmio dule boot Qosmio G30-116, booting in windows generates a blue screen of death, which is quickly cleared before I can read what is displayed.
Boot it in windows safe mode results in a long list of files being displayed the last one being Mup.sys
Booting the machine in Linux and running everything that I can think off does not generate an error.
Running the on board Toshiba dignostics from the BIOS does not generate an error.
Running the linux memory check does not generate an error.
Viewing the file system does not generate an error.
So I don't think I have a hardware problem, I think something is matter with windows
Does anybody have any idea how to stop my clearing the screen so I can actual find out what the problem is ?
There is a lot of valuable software on this machine, I have no desire to trash the entire disk to attempt to repair what seems to be a specfic windows problem.

Hi,
I am sure its not a hardware problem. Its a pure windows related problem but its like one of these bluescreens which try to tell you that your memory is gone. :(
First of all, try to remember which software youve recently installed. Which drivers were updated and how many microsoft KBs were automatically installed.
I would really recommend you to google for "Mup.sys" and check the site "hardwareanalysis" which is the second entry when searching for that term.
This problem has many reasons and there are many different solutions..because the reasons are so different. So, if you want to keep your "valuable" programs and dont want to reinstall your system (what could be btw. the easiest way after backing up your "valuable" software) then check the forum Ive suggested and you will find hopefully the enlightment.
Greets

Similar Messages

  • Ipad air boots with blue screen

    my ipad air boots 4 5 times with blue screen as i use my wifi.....and it happend as i updated to ios 8. And i'm noticing from few days. I need the solutions

    Hi Air.sam, 
    Welcome to the Apple Support Communities!
    I know that situations like this can be very frustrating. There are some very good troubleshooting steps that I would recommend in this situation however. Please use the attached article and troubleshooting steps to help you resolve the situation. 
    iPhone: Hardware troubleshooting
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 30 minutes, if:
    The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    Regards, 
    Joe

  • X200 with OCZ ssd blue screens when booting from docking station

    The x200 blue screens when booting from the docking station. If I take the laptop out of the docking station to boot and then dock once booted the laptop is fine.
    The issue started happening when you I upgraded the laptop form xp to windows 7 and installed an OCZ vertex 2 solid state drive.
    I have tried updating the firmware on the ssd using this utility
    http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806
    The program showed that my ssd was running firmware version 1.29 and did not need to be updated.
    I have also tried updating the x200 to the latest BIOS. Nothing seems to work.
    Any ideas or suggestions are greatly appreciated.
    Solved!
    Go to Solution.

    you need to modify a registry value before going from AHCI to IDE. (or viceversa).
    http://www.ocztechnologyforum.com/forum/showthread.php?69682-Change-from-IDE-to-AHCI-after-Installat... 

  • IPad ios8 random reboot with blue screen

    Hi everyone,
    I Know this question has been posted already but I'm so frustrated.
    after upgrading to iOS 8 my iPad air started to reboot randomly with blue screen at least 5 to 6 times a day.
    when will apple provide an update fixing this issue? Since it seems more common.
    model: iPad air wifi only
    ios: 8.0.2
    i have tried turning off iCloud sync as many suggested but it didn't help.
    reboots are frequent when I'm using safari.
    most of the time the diagnostic log shows WDT timeout
    {"bug_type":"110","os_version":"iOS 8.0.2 (12A405)"}
    Incident Identifier: 524C9CFE-E20D-4D2F-B661-9CFD8A0CB89E
    CrashReporter Key:   1db2e77104549f32cb56eb1d2daee436b4bdd220
    Hardware Model:      iPad4,1
    Date/Time:           2014-10-12 16:24:31.232 +0530
    OS Version:          iOS 8.0.2 (12A405)
    Debugger message: WDT timeout
    6s ago: 0b50 0f9fd0ce63 0r1e88000 0m0/1
    OS version: 12A405
    Kernel version: Darwin Kernel Version 14.0.0: Thu Sep 18 21:51:01 PDT 2014; root:xnu-2783.1.72~23/RELEASE_ARM64_S5L8960X
    iBoot version: iBoot-2261.1.68
    secure boot?: YES
    Paniclog version: 3

    Try Barry's suggestion first.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow the on-screen directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore (or it doesn't help), go into Recovery Mode per the instructions here.  You WILL lose all of your data (game scores, etc,) but, for the most part, you can redownload apps and music without being charged again.  Also, read this.

  • Waking up from sleep with blue screen

    Waking up from sleep with blue screen
    Since a few days my MBP wakes up from sleep by showing a blue screen for 30 seconds or more, instead of jumping to the login window (password needed after sleep)
    I looked in the forums for blue screen but found many problems non related to this.
    Any ideas?
    Could it have to do with the fact that about 4 days ago I upgraded to 4.8 from 4.7?

    Hi ChangeAgent,
    FINDER> FILE > FIND
    Use the FIND file from the Finder, not Spotlight, to find the folder called Receipts and click on this folder. Scroll down to see if you have this Security Update installed --
    Security Update: 2006-008
    it may be causing general problems to everyone.
    I have only seen this BLUE SCREEN since I installed this security update.
    It's the very latest one.
    The Blue Screen is not my only problem:
    I have had two system crashes (computer waking up with DARWIN window error, fixed when I re-booted).
    Scrolling has slowed down in some applications.
    The update in Microsoft Office vX was reverted, yesterday I received a message that said: Welcome to Microsoft Office (how can it welcome me when I have been using it every day for the past 15 years?)
    Dashboard: It takes 3 minutes for the Widgets to upload.
    SOMETHING is not right with this Security Update. Apple, please HELP!
    iBook 14 G4   Mac OS X (10.4.8)  

  • Blue screen on boot up

    I am having issues with my 13.3" MBP, blue screen on boot up?, cannot figure out why? If I log in as another user(from my older macbook) it will boot but I cannot get to my newer files and docs. Any thoughts?, it appears to be a permission issue as if I boot up as a target disk using firewire, the files I want to access are still on my hard drive.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
    Be sure your Mac is shut down.
    Press the power button.
    Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
    Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
    *Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem(s)?
    After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

    I am getting frequent lock-ups and blue screens during boot up on my Mac Pro.  The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
    I had the Mac Defender malware and I have used apple jack but still having issues.

  • IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

    hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
    I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
    help please, this phone is all the means of communication I have.

    It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

  • Satellite L650 - frequent computer restart with blue screen

    Hi, I bought an L650 about 2months ago so it is still under warranty.
    Recently (maybe last 2 weeks) it has continued to shut down with blue screen of death. It seemed to occur more if I opened up many tabs in internet and i thought it might be adobe flash but don't think so anymore.
    It says if there is new hardware or software installed try reinstall it but I do not know which software and there is no new hardware.
    "a problem has been detected and windows has been shyt down to protect your computer
    A process or thread crucial to system operation has unexpectedly exited or terminated.
    technical information:
    *** STOP: 0x000000F4 (0X00000000000003, OxFFFFFFFFAB007A4B30, 0xFFFFFFFFFA(rest off screen from camera)
    xFFFF800035C#1EO
    Somthing like above although its quick video on my camera so some numbers may be wrong.
    Can someone help if this is a hardware malfunction or my fault somehow?
    Is this a warranty problem or what should I do?
    I never made any windows CD or anything when I bought laptop unfortunately so do not know if I can reformat harddrive?
    Thanks.
    Kadin

    Hello
    It is worst than at the beginning with STOP: 0x000000F4 error message. It is always problematic to help with such problems because your notebook configuration, preinstalled software and activity is not known to us.
    In my opinion you should back-up all your important data, install OS again using HDD recovery option and test functionality with original OS without any additional software installation.
    If the BSOD will occur again and again I recommend you to contact nearest Toshiba service and ask for help. I have two Toshiba notebooks and until now I didnt notice BSOD at all.

  • Hello i have a problem when i start woorksheet, my computer crash with blue screen sometimes.

    hello i have a problem when i start woorksheet, my computer crash with blue screen.
    OS: Win 2000 pack 2 and dasylab 7.00.05 ;ddi7.02 ;nidaq 7.0
    I hve this problem sometimes and need to reebot my computer.This worksheet is used to generate 4 signals to output and have an acquisition tooin this 4 channels.
    The error is in the blue screen:0x00000076 (0x00000000 , 0x81358300, 0x000001c2, 0x00000000).
    Thanks for your help.

    The DASYLab development team has read your message, and advises that there is insufficient information to be able to even start diagnosing the problem. We suggest that you send a note directly to [email protected], with your full contact information, DASYLab serial number, and the following technical information:
    -The Help-->Report information - this will tell us more about the computer, video and installed memory
    -Installed hardware - what DAQ devices are you using (exact models!)
    -The worksheet that crashes - we need to see how the timing is configured in the worksheet
    -What other programs are running at the same time?
    -Does the worksheet crash every time?
    -Does the NI-DAQ Test Panel work correctly for both inputs and outputs?
    Sorry that we cannot be more help in this forum; we do not have much experience with blue screen under Windows 2000. This is very hard to do, and is almost always related to a hardware problem - either a resource conflict, or problems with one of the installed hardware devices (DAQ, Video, Memory...).
    Regards,
    -cj
    - cj
    Measurement Computing (MCC) has free technical support. Visit www.mccdaq.com and click on the "Support" tab for all support options, including DASYLab.

  • TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

    My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

    Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple. 

  • Can anyone help me with blue screen while updating to ios8?

    help me with blue screen while updating to io8.2

    I don't have a 4G device, but I thought you can use mobile safari, the safari on the iPad, on 4G.
    You could also try looking for a third party app. The official facebook app has been non to barely functional for years. I use mobile safari on my iPad although I do have a couple  of apps I've used upon occasion.

  • Satellite M40X-169 when connected to wireless unit shuts down with blue screen and restarts

    Hello.
    I got the problem with my notebook when i'm connecting and getting connected to the wireless network. My notebook is shutting down with blue screen error and then restarts.
    Maybe you can help me to solve this problem, because i can normaly work when i need to be connected.
    Plaese help me.

    Hi
    It is not easy to give you some precise answer but try to remove WLAN card from device manager and restart the unit. You can also check Toshiba download page and try to install the latest WLAN card driver.

  • My iphnoe5S always crash with blue screen,sometimes can`t start up

    my iphnoe5S always crash with blue screen,sometimes can`t start up

    Hello liuqinqin,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    If the device remains unresponsive or does not turn on (or power on), reset your device.
    If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
    If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
    Let it charge for at least twenty minutes, then see if it starts normally.
    If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
    If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
    If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
    Have a nice day,
    Mario

  • Window 7 on Bootcamp crush with Blue Screen..

    Dear All,
    I am facing with crushing on Window 7 with blue screen for quite frequently. When i using the Mac OS X Lion, It is quite stable but happened Kernel Panic or Automatic Restarting. But it only happens rarely..
    Bluescreen Details:
    Appears like Memory Dump Error. And also mention to remove the newly installed hardware or software. And also mention about Virtualization.
    Scenario:
    I have installed Oracle Virtual Box on the Bootcamp Window 7 and run the virtual machine. After that start happening this errors and i have remove all the virtual machines and Oracle Virtual Box.
    Taken Action:
    Remove the Bootcamp Partitions and reinstall the Window 7 but after installed, it come out blue screen once again.
    What i think is because of Virtualization on BIOS but i am not sure how to turn it off on Mac.
    Please give me suggestions on how to repair this and thanks in advance for your advices.
    Best Regards,
    Great Mahar.

    I only suggested this scenario based on personal experience. I have faced 2 BSODs, while using Chrome in an XP box that I have at home. Also one of my college friends has experienced the same issue while using chrome on Windows 7. However, these have not occurred in a while since upgrading to the latest version of chrome. Honestly I don't know what could be your case but it should be a good idea to run the Apple Hardware Test to check the ram modules for errors as hatter suggested.

Maybe you are looking for

  • Human Task Permissions

    We are using BPM 11.1.1.6. We are dealing with huge payloads and are storing the bulk of data in a separate schema outside of the BPM engine. This data will be surfaced via ADF-BC in a human task UI. I am looking for a method in the BPM API that expo

  • DNG Converter clips Pentax PEF images

    I wish to convert Pentax PEF files to DNG files due to the better compression and shell handling of the DNG format. I have tried converting using Adobe DNG Converter 5.2.0.65 As noted in http://www.adobeforums.com/webx/?14@@.3bc03c04.59b79390/46 the

  • App crashes with EXC_BAD_ACCESS while loading preferences on @Property

    Hello everybody, this is one of many EXC_BADACCES questions, but I have done research for a long time and think that this question has not been answered yet. My App saves data with in the preferences. Everything wents well, if I delete the preference

  • [Linker Error] Unresolved external 'niScope_init' referenced from C:\ALUNOS\ALLAN\EVA\BUILDER2.0B\UNIT1.OBJ

    Hi, First of all I'm sorry about my English. I'm developing a software on Builder C++ by Borland and we bought an NI DAQ 5112 PCI. I'd like to know if is possible to use the high-level functions from niScope (such as niScope_init, _AutoSetup, _close.

  • Premier Pro working seamlessly with Lightroom

    I am considering purchasing Premier Pro to replace imovie, since I changed from Aperture to Lightroom. I have a few questions: 1. Will Premier Pro work seamlessly, allowing me to import photos from LR5 to Premier Pro? 2. Is there an allowance to add