Qosmio F - Unable to load into Windows or anything

Yesterday, while studying other day outside another student bumped the table I was studying on. I would say "tapped" as it was not that hard. The normal message appears where it says the laptop will move the harddrive to a safe location etc.
Shortly after maybe 10-20mins, I get a message on the laptop screen asking me to "backup the laptop" as there was some major error or failure. I clicked on the "additional information" and it basically said all my drives C:, G: and whatever I had disk failure or something. Unable to backup the laptop as I did not have CD's present to back it up with I took it home to do i today.
The laptop is refusing to even load into windows at the moment. Unable to back up or anything. Keeps loading into options about system repair, restore, memory diagnostics etc. nothing fixes it.
I've only purchased the laptop since oct/nov of 2010. Didnt start using it till jan/feb of this year also. Should I attempt to open up the HDD as it might have loosen out at the back or? Should I send it back to manufacturer to look at? It's critical exam time for me and this is devastating! Also flying overseas late June after exams and wishing to take the laptop over there. Please help! Thanks advance for all advice and suggestions.

Hi Kyo,
Your posting is a little bit hard to understand and a screenshot of this error message would be useful but if you get an message about defective HDD and all partitions you should contact an authorized service provider in your country.
Your notebook should be still under warranty so the guys can replace the HDD for free. If you need some important data you can ask if they can rescue some files and do a backup. Alternative you can try it yourself if you buy an external HDD case for example. Then you can connect the HDD via USB to another computer.

Similar Messages

Qosmio G30 display flickering and unable to log into Windows

I have to press F5 to make the display visible everytime I boot up. I thought that it was a software related issue and I tried to format the HDD with original recovery CD. However, the screen keeps flickering from the BIOS stage.
Now, it is even worse. The screen is flickering when power up and I cannot log into Windows MCE after the HDD formated.
After reading the related articles and FAQ, I suspect it was a graphic card (hardware) issue.
My graphic card is NVidia Go7600. Is this true and is it a must to change the hardware (graphic card)?
Appreciate your advice before I contact the local support team.
Thanks a lot!

Hi!
Thats a strange issue. Do you have the same problems on an external monitor?
If a display is flickering, the display itself is defective because the FL-tube is causing the error. I think the best is, when an ASP (authorized service provider) checks your Qosmio G30.
Here you can search for one:
http://eu.computers.toshiba-europe.com => Support & Downloads => Find an ASP
Good luck
Bye

Unable to load from Windows Media Player to iPod Touch. Help appreciated Big Al

Unable to load music or audiobook from Windows Media PLayer to my iPod Touch. Also unable to connect to internet via NON WiFi Broadband. Help please.

You don't.
You sync via itunes
Put all of your music in itunes.

Unable to boot into Windows 7

Hello, today I was playing some video games inside of Windows 7, upon noticing that whenever the computer had an area that text could be entered, it would spam the space bar into that area. Ex. when i would hit the start menu, in the little text box that is for searching, the courser would move continuously across it, as if the space bar was being pressed. So I restarted. As normal when I heard the startup chime i pressed and held the option key to bring up the OS selection tab. But instead of bringing up the menu, it booted straight to OSX. (i tried this a few times with the same results). So I went into the bootcamp menu in settings on osx and selected windows as the startup OS. I then restarted. When the computer started up I was prompted to select Windows 7 to continue the boot process, so I did. It then went to the starting windows screen where it became stuck. I force shut down and tried again, but this time i tried to repair the disk in windows. The first time it failed to repair, then i did a memory test and when it restarted it worked. In windows i told bootcamp to use OSX as the startup disk and tried holding down option to go back to windows again, nothing, it went to osx. So in osx i went into the bootcamp menu in settings again, and selected windows and restarted. It got stuck on the selection screen in windows and i force shut down and tried again, but this time with with repair again. This time the repair was successful and it went to windows normally. So now it appears that i can only boot into windows by telling bootcamp that i want to boot into windows automatically. Holding down the option key does not seem to bring up the disk selector. I can verify that the option key does work because i tried 'command+option+esc" and it worked. any ideas on what the frik is going on?

Update! So apparently I believe the problem is coming from a few windows updates that are out. Whenever I repaired the disk it always uninstalled those updates. I repaired the disk again because it got stuck on bootup and when i logged back on it asked me to re install those updates. without them installed the option key thing worked again. So i guess i wont be updating this thing anymore...

Loading into Windows 7 (Boot Camp) takes really long.

Hello, I recently installed Windows 7 Ultimate on my MBP Early '11 and thought everything went well, but after a restart I noticed it's not. When I try to start up a black screen shows up and the _ symbol blinks for about 2 minutes until Windows 7 finally starts to load up. I don't think that's normal and I've never encountered, nor seen this problem before. I already tried repairing the volume with the Disk Utility tool on OS X and I also tried to repair the volume by booting from the Windows 7 installation disk, but no error was found and nothing got repaired. Did anyone already have this problem and knows how to solve it? I don't really want to reinstall Windows, that's why I rather ask before doing something unnecessary.
Thank you very much!
Cheers,
Xavier

Hello, I recently installed Windows 7 Ultimate on my MBP Early '11 and thought everything went well, but after a restart I noticed it's not. When I try to start up a black screen shows up and the _ symbol blinks for about 2 minutes until Windows 7 finally starts to load up. I don't think that's normal and I've never encountered, nor seen this problem before. I already tried repairing the volume with the Disk Utility tool on OS X and I also tried to repair the volume by booting from the Windows 7 installation disk, but no error was found and nothing got repaired. Did anyone already have this problem and knows how to solve it? I don't really want to reinstall Windows, that's why I rather ask before doing something unnecessary.
Thank you very much!
Cheers,
Xavier

Unable to load into XMLTYPE column: enumeration value considered as boolean

HI Gentlemen,
I have a problem with my XMLTYPE load procedure. The schemas have been registered:
SQL> select any_path from resource_view where any_path like '%GKSADMIN/ICD%';
ANY_PATH
/sys/schemas/GKSADMIN/ICD
/sys/schemas/GKSADMIN/ICD/datentypen_V1.40.xsd
/sys/schemas/GKSADMIN/ICD/ehd_header_V1.40.xsd
/sys/schemas/GKSADMIN/ICD/ehd_root_V1.40.xsd
/sys/schemas/GKSADMIN/ICD/icd_body.xsd
/sys/schemas/GKSADMIN/ICD/icd_header.xsd
/sys/schemas/GKSADMIN/ICD/icd_root.xsd
/sys/schemas/GKSADMIN/ICD/keytabs_V1.40.xsd
8 Zeilen ausgewählt.The table has been created:
SQL> describe icd
Name                                      Null?    Typ
ID                                                 CHAR(2)
XML_DOCUMENT                                       SYS.XMLTYPE(XMLSchema "ICD/i
                                                    cd_root.xsd" Element "ehd")
                                                    STORAGE Object-relational TY
                                                    PE "ICD$ICD_ROOT_TYP"And I try to insert an instance document:
SQL> @loadxmlfileascolumn_int
Geben Sie einen Wert für source_directory ein: c:\gks\kbv\c\icd\xml
alt   1: create or replace directory SOURCE_DIR as '&source_directory'
neu   1: create or replace directory SOURCE_DIR as 'c:\gks\kbv\c\icd\xml'
Verzeichnis wurde erstellt.
Geben Sie einen Wert für xmltypetable ein: icd
alt   4:   INSERT INTO &XMLTypeTable
neu   4:   INSERT INTO icd
Geben Sie einen Wert für id ein: 01
Geben Sie einen Wert für instancedocument ein: icdtest.xml
alt   5:     VALUES (&id, XMLType(bfilename('SOURCE_DIR', '&InstanceDocument'),
neu   5:     VALUES (01, XMLType(bfilename('SOURCE_DIR', 'icdtest.xml'),
declare
FEHLER in Zeile 1:
ORA-31038: Ungültiger boolean Wert: "j"
ORA-06512: in Zeile 4
SQL> spool offAs the schemas are very big, i copied only relevant parts of them to show how the values are defined (in icd_body.xsd):
<xs:element name="abrechenbar">
<xs:annotation>
    <xs:documentation>Kennzeichnung, ob (abrechenbarer) ICD-10-GM-Code</xs:documentation>
</xs:annotation>
<xs:complexType>
    <xs:attribute name="V" use="required">
      <xs:simpleType>
        <xs:restriction base="xs:string">
       <xs:enumeration value="j"/>
       <xs:enumeration value="n"/>
     </xs:restriction>
      </xs:simpleType>
    </xs:attribute>
</xs:complexType>
</xs:element>
SQL> spool off
"j" and "n" are for Yes and No in German. But anyway, how could it become a Boolean? Why is it invalid?
Can you please help me so that I can load XMLTYPE contents?
Thanks, regards
Miklos HERBOLY
Sorry, I found one place where a boolean will be expected. I modified in the instance document so that it has true or false. And still something is recognized as boolean with the value of "j".
Edited by: mh**** on Jul 4, 2011 4:43 AM
Edited by: mh**** on Jul 4, 2011 5:07 AM

I don't get it, it should work, right? Although I am not sure if a XMLType Object Relational column is supported, but then again this is not clear in the documentation.
The only thing I can think of is that the attribute "V" is enforced as a boolean in the database on lower Object Relational level or...

Unable to load into XMLTYPE column

HI Gentlemen,
I have considerable difficulties with loading XML content into an XMLTYPE column. Here are the annotated schemas:
SQL> select any_path from resource_view where any_path like '%GKSADMIN/ICD%';
ANY_PATH
/sys/schemas/GKSADMIN/ICD
/sys/schemas/GKSADMIN/ICD/datentypen_V1.40.xsd
/sys/schemas/GKSADMIN/ICD/ehd_header_V1.40.xsd
/sys/schemas/GKSADMIN/ICD/ehd_root_V1.40.xsd
/sys/schemas/GKSADMIN/ICD/icd_body.xsd
/sys/schemas/GKSADMIN/ICD/icd_header.xsd
/sys/schemas/GKSADMIN/ICD/icd_root.xsd
/sys/schemas/GKSADMIN/ICD/keytabs_V1.40.xsd
8 Zeilen ausgewählt.And here is the relational table:
SQL> describe icd
Name                                      Null?    Typ
ID                                                 CHAR(2)
XML_DOCUMENT                                       SYS.XMLTYPE(XMLSchema "ICD/i
                                                    cd_root.xsd" Element "ehd")
                                                    STORAGE Object-relational TY
                                                    PE "ICD$ICD_ROOT_TYP"Now, when I try to load an instance document (which has proven OK with xmloracle), the following happens:
SQL> @loadxmlfileascolumn_int
Geben Sie einen Wert für source_directory ein: c:\gks\kbv\c\icd\xml
alt   1: create or replace directory SOURCE_DIR as '&source_directory'
neu   1: create or replace directory SOURCE_DIR as 'c:\gks\kbv\c\icd\xml'
Verzeichnis wurde erstellt.
Geben Sie einen Wert für xmltypetable ein: icd
alt   4:   INSERT INTO &XMLTypeTable
neu   4:   INSERT INTO icd
Geben Sie einen Wert für id ein: 01
Geben Sie einen Wert für instancedocument ein: icdtest.xml
alt   5:     VALUES (&id, XMLType(bfilename('SOURCE_DIR', '&InstanceDocument'),
neu   5:     VALUES (01, XMLType(bfilename('SOURCE_DIR', 'icdtest.xml'),
declare
FEHLER in Zeile 1:
ORA-01830: Datumsformatstruktur endet vor Umwandlung der gesamten
Eingabezeichenfolge
ORA-06512: in Zeile 4
SQL> spool offSince the schemas are very big, I took only relevant parts of them to show:
    <ehd:document_type_cd V="ICD" DN="ICD-Stammdatei" S="1.2.276.0.76.5.100"/>
    <ehd:service_tmr V="2010-01-01..2010-12-31"/>
    <ehd:origination_dttm V="2009-11-10+01:00"/>Guilty is allegedly origination_dttm with its time zone. However, consider the type resolution below that leads to xs:date. This should be able to accommodate the time zone as well.
     
     <xs:element name="origination_dttm" type="origination_dttm_typ">
          <xs:annotation>
               <xs:documentation>Erstellungsdatum</xs:documentation>
          </xs:annotation>
     </xs:element>
     <xs:complexType name="origination_dttm_typ">
          <xs:complexContent>
               <xs:extension base="v_date_typ"/>
          </xs:complexContent>
     </xs:complexType>
     v_date_typ: enthält nur den V-Attribut für einfache Datums-Angaben
     
     <xs:complexType name="v_date_typ">
          <xs:attribute name="V" type="xs:date" use="required"/>
     </xs:complexType>When I delete the time zone portion in the instance document, it again works.
(However, other errors will then be reported--another issue.)
Can you help me to find out what is wrong? Is it my error or a bug?
Thanks, kind regards,
Miklos HERBOLY
Edited by: mh**** on Jul 3, 2011 10:55 AM

This is Oracle feature (at least in 11g R2). See Working with Timezones from XML DB Developer's Guide: http://download.oracle.com/docs/cd/E11882_01/appdev.112/e16659/xdb05sto.htm#autoId62
The chapter also includes an example how to adjust the schema with Oracle specific annotation.
See also http://stackoverflow.com/questions/6370035/why-dbms-xmlschema-fails-to-validate-a-valid-xsdatetime/6382096#6382096
Edited by: 836290 on Jul 4, 2011 7:56 AM

Unable to load into XMLTYPE column--ORA-21700

HI Gentlemen,
I have a nice schema-based table and want to insert into it. However, I always get ORA-21700. Which object is marked for delete? I did not mark anything.
SQL> @createIcdTable
Tabelle wurde gelöscht.
Tabelle wurde erstellt.
SQL> describe icd
Name                                      Null?    Typ
ID                                                 CHAR(2)
XML_DOCUMENT                                       SYS.XMLTYPE(XMLSchema "ICD/i
                                                    cd_root.xsd" Element "ehd")
                                                    STORAGE Object-relational TY
                                                    PE "ICD$ICD_ROOT_TYP"And here is the load script:
SQL> @loadxmlfileascolumn_int
Geben Sie einen Wert für source_directory ein: c:\gks\kbv\c\icd\xml
alt   1: create or replace directory SOURCE_DIR as '&source_directory'
neu   1: create or replace directory SOURCE_DIR as 'c:\gks\kbv\c\icd\xml'
Verzeichnis wurde erstellt.
Geben Sie einen Wert für xmltypetable ein: icd
alt   4:   INSERT INTO &XMLTypeTable
neu   4:   INSERT INTO icd
Geben Sie einen Wert für id ein: 01
Geben Sie einen Wert für instancedocument ein: test.xml
alt   5:     VALUES (&id, XMLType(bfilename('SOURCE_DIR', '&InstanceDocument'),
neu   5:     VALUES (01, XMLType(bfilename('SOURCE_DIR', 'test.xml'),
declare
FEHLER in Zeile 1:
ORA-21700: Objekt nicht vorhanden oder zum Löschen markiert
ORA-06512: in Zeile 4
SQL> spool offCould anybody help me how to circumvent this? Or a bug again?
Thanks, regards
Miklos HERBOLY
Edited by: mh**** on Jul 4, 2011 10:31 AM

HI mdrake,
Thank you for your reply. I executed the schema registration with gentables=TRUE: the same error occurred. Here are the schema dependencies--I can not find any recursion in them. Note that schema file names end in .ann (for annotated), but registered schema urls's are .xsd names.
ehd_header_V1.40.ann
     <xs:include schemaLocation="ICD/datentypen_V1.40.xsd"/>
ehd_root_V1.40.ann
     <xs:include schemaLocation="ICD/ehd_header_V1.40.xsd"/>
     <xs:include schemaLocation="ICD/keytabs_V1.40.xsd"/>
     <xs:import namespace="urn:ehd/icd/001" schemaLocation="ICD/icd_body.xsd"/>
icd_header.ann
     <xs:include schemaLocation="ICD/ehd_header_V1.40.xsd"/>
icd_root.ann
     <xs:include schemaLocation="ICD/ehd_root_V1.40.xsd"/>
     <xs:include schemaLocation="ICD/keytabs_V1.40.xsd"/>
     <xs:include schemaLocation="ICD/icd_header.xsd"/>
     <xs:import namespace="urn:ehd/icd/001" schemaLocation="ICD/icd_body.xsd"/>
keytabs_V1.40.ann
datentypen_V1.40.ann
icd_body.ann
--Then I executed your query, setting NULL to ?, with the following results (I am sorry about the bulky stuff here)
SQL> @m
URL                            NAME                             TBL
ICD/datentypen_V1.40.xsd       document_relationship.type_cd    ?
ICD/datentypen_V1.40.xsd       related_document                 ?
ICD/datentypen_V1.40.xsd       id                               ?
ICD/datentypen_V1.40.xsd       set_id                           ?
ICD/datentypen_V1.40.xsd       version_nbr                      ?
ICD/datentypen_V1.40.xsd       intended_recipient.type_cd       ?
ICD/datentypen_V1.40.xsd       function_cd                      ?
ICD/datentypen_V1.40.xsd       originator.type_cd               ?
ICD/datentypen_V1.40.xsd       function_cd                      ?
ICD/datentypen_V1.40.xsd       participation_tmr                ?
ICD/datentypen_V1.40.xsd       provider.type_cd                 ?
ICD/datentypen_V1.40.xsd       function_cd                      ?
ICD/datentypen_V1.40.xsd       participation_tmr                ?
ICD/datentypen_V1.40.xsd       group.type_cd                    ?
ICD/datentypen_V1.40.xsd       id                               ?
ICD/datentypen_V1.40.xsd       person_name                      ?
ICD/datentypen_V1.40.xsd       nm                               ?
ICD/datentypen_V1.40.xsd       GIV                              ?
ICD/datentypen_V1.40.xsd       MID                              ?
ICD/datentypen_V1.40.xsd       FAM                              ?
ICD/datentypen_V1.40.xsd       PFX                              ?
ICD/datentypen_V1.40.xsd       SFX                              ?
ICD/datentypen_V1.40.xsd       DEL                              ?
ICD/datentypen_V1.40.xsd       id                               ?
ICD/datentypen_V1.40.xsd       STR                              ?
ICD/datentypen_V1.40.xsd       HNR                              ?
ICD/datentypen_V1.40.xsd       POB                              ?
ICD/datentypen_V1.40.xsd       ZIP                              ?
ICD/datentypen_V1.40.xsd       CTY                              ?
ICD/datentypen_V1.40.xsd       STA                              ?
ICD/datentypen_V1.40.xsd       CNT                              ?
ICD/datentypen_V1.40.xsd       ADL                              ?
ICD/datentypen_V1.40.xsd       patient.type_cd                  ?
ICD/datentypen_V1.40.xsd       person                           ?
ICD/datentypen_V1.40.xsd       birth_dttm                       ?
ICD/datentypen_V1.40.xsd       administrative_gender_cd         ?
ICD/datentypen_V1.40.xsd       local_header                     ?
ICD/datentypen_V1.40.xsd       id                               ?
ICD/datentypen_V1.40.xsd       interface.nm                     ?
ICD/datentypen_V1.40.xsd       version                          ?
ICD/datentypen_V1.40.xsd       description                      ?
ICD/datentypen_V1.40.xsd       scope.type_cd                    ?
ICD/icd_body.xsd               kapitel_liste                    ?
ICD/icd_body.xsd               diagnosethesaurus_liste          ?
ICD/icd_body.xsd               kapitel                          ?
ICD/icd_body.xsd               nummer                           ?
ICD/icd_body.xsd               von_icd_code                     ?
ICD/icd_body.xsd               bis_icd_code                     ?
ICD/icd_body.xsd               bezeichnung                      ?
ICD/icd_body.xsd               gruppen_liste                    ?
ICD/icd_body.xsd               gruppe                           ?
ICD/icd_body.xsd               von_icd_code                     ?
ICD/icd_body.xsd               bis_icd_code                     ?
ICD/icd_body.xsd               bezeichnung                      ?
ICD/icd_body.xsd               diagnosen_liste                  ?
ICD/icd_body.xsd               diagnose                         ?
ICD/icd_body.xsd               icd_code                         ?
ICD/icd_body.xsd               bezeichnung                      ?
ICD/icd_body.xsd               abrechenbar                      ?
ICD/icd_body.xsd               diagnosen_liste                  ?
ICD/icd_body.xsd               diagnosethesaurus_liste          ?
ICD/icd_body.xsd               kodierrichtlinien_liste          ?
ICD/icd_body.xsd               notationskennzeichen             ?
ICD/icd_body.xsd               geschlechtsbezug                 ?
ICD/icd_body.xsd               geschlechtsbezug_fehlerart       ?
ICD/icd_body.xsd               untere_altersgrenze              ?
ICD/icd_body.xsd               obere_altersgrenze               ?
ICD/icd_body.xsd               altersbezug_fehlerart            ?
ICD/icd_body.xsd               krankheit_in_mitteleuropa_sehr_s ?
ICD/icd_body.xsd               schlüsselnummer_mit_inhalt_beleg ?
ICD/icd_body.xsd               infektionsschutzgesetz_meldepfli ?
ICD/icd_body.xsd               infektionsschutzgesetz_abrechnun ?
ICD/icd_body.xsd               diagnosethesaurus                ?
ICD/icd_body.xsd               hausarztkodierung                ?
ICD/icd_body.xsd               akr_ref                          ?
ICD/ehd_header_V1.40.xsd       id                               ?
ICD/ehd_header_V1.40.xsd       set_id                           ?
ICD/ehd_header_V1.40.xsd       version_nbr                      ?
ICD/ehd_header_V1.40.xsd       document_type_cd                 ?
ICD/ehd_header_V1.40.xsd       service_tmr                      ?
ICD/ehd_header_V1.40.xsd       origination_dttm                 ?
ICD/ehd_header_V1.40.xsd       state                            ?
ICD/ehd_header_V1.40.xsd       interface                        ?
ICD/ehd_root_V1.40.xsd         header                           ?
ICD/ehd_root_V1.40.xsd         body                             ?
ICD/ehd_root_V1.40.xsd         keytabs                          ?
ICD/ehd_root_V1.40.xsd         icd:icd_stammdaten               ?
ICD/icd_header.xsd             id                               ?
ICD/icd_header.xsd             document_type_cd                 ?
ICD/icd_header.xsd             service_tmr                      ?
ICD/icd_header.xsd             origination_dttm                 ?
ICD/icd_header.xsd             interface                        ?
ICD/icd_header.xsd             id                               ?
ICD/icd_header.xsd             interface.nm                     ?
ICD/icd_header.xsd             version                          ?
ICD/icd_header.xsd             description                      ?
ICD/icd_root.xsd               header                           ?
ICD/icd_root.xsd               body                             ?
ICD/icd_root.xsd               keytabs                          ?
ICD/icd_root.xsd               icd:icd_stammdaten               ?
100 Zeilen ausgewählt.
SQL> spool offWhat else could it be?
Well, installation did not complain at all, but when I inspect trace.log, there ar lines such as
PRCT-1400 : Ausführung von getcrshome nicht erfolgreich. Detaillierter Fehler: localnode
[main] [ 2011-07-01 22:38:00.836 CEST ] [HAUtils.isHASConfigured:412] Ignoring exception in isHASConfigured: PRCI-1112 : Übergebener Verzeichnisname war Null
PRCI-1112 : Übergebener Verzeichnisname war Null
...Can this interfere with my problem?
Edited by: mh**** on Jul 9, 2011 1:56 AM

BI Z-Table as datasource unable to load into psa

Dear Experts
I have a ztable datasource. The ztable is in BI . The table contains text fields for all the attributes.
I have mapped this to 0customer attribute without mapping the text fields from the datasource / ztable.
I created an infopackage to full load all data from the table.
The infopackage was waiting at "Extraction " stage. It showed "xxx number of records were sent ".
At "processing" stage , the "data package" section shows message "A data packet is either sent with transfer method iDoc or psa to BI ......"
In the monitor wizard, the diagnosis showed: "the background job in the source system was not terminated. In this case it is probable that the tRFC to or from the soure system is incorrect. To check this, the ALE inbox of the source system must be checked and compared with the BI ALE inbox."
Please advise what could be the cause for not being able to load this data from ztable.
Thank you .
regards
Bass

Dear Venkatesh,
I was unable to find any sm37 errors.
Can I confirm that to load to 0customer in BI7, the datasource created can be of type 3.x or BI7 type?
When creating the datasource, I selected non 3.x type. Only 2 types can be selected from.
Also, I rerun the infopackage (IP) with ST01 trace on my id for authorization and SQL trace.
Nothing was found.
The IP status is yellow : "Data not received in PSA Table"
Diagnosis : "Data has not been updated in PSA Table . The request is probably still running or there was a short dump."
and it appears to be waiting for something forever. It will time out and then the request is red.
regards
Bass

Unable to Log into Windows

I originally installed Windows XP Professional using Boot Camp without a problem. A couple of months ago I installed Parallels and told it to use my Boot Camp partition.
I was able to run Windows through either Parallels or Boot Camp without a problem.
A couple of days ago I tried to load Windows through Boot Camp (for the first time in months, I've been using Parallels every day), I get to the Windows log in screen, after pressing OK the desktop picture comes up, then that Windows error sound plays, and I get a small window with a big red circle with a cross through it (the Windows error symbol), but no text, just a 'OK' button. As soon as I press that, the windows logging out window appears and it takes me back to the log in screen?
Windows still runs perfectly fine through Parallels?
Any suggestions?
Thanks,

Hi and welcome to Discussions,
for troubleshoot you might wanna start with the Safe Boot options of XP as explained here http://support.microsoft.com/?scid=kb%3Ben-us%3B315222&x=10&y=11
Could be a driver or a startup item that is causing the BSOD so using the Safe Mode (minimal) or the enable Boot Logging might show it.
If you can't get to these options, you might try a repair of your XP installation with a boot-up from the XP install CD and using the repair feature.
Since you can read and copy files from your XP partition when in OSX you should have no problems to 'backup' your valuable Windows files.
Regards
Stefan

Satellite L300-135 not booting into windows!

bought it about 2 years ago everything worked perfectly until today where it's even unable to boot into windows vista...I just turn it on when the windows loading bar is loading then it shows blue screen for 0.1 sec and it resets itself... even the safe mode wouldn't start and restore mode (last good known config) couldn't help it to start...i tried using an ubuntu linux live cd to save my datas but couldn't boot either, gave an error stating something as abnormal.
so where's the problem ?
Windows boot manager tried to find the problem and is telling me this:
status: 0xc00000e9
info: An unexpected I/O error has occured.

> so where's the problem ?
Who knows??? Do you think its so easy to say whats exactly wrong without running any tests???
Maybe its just a software issue but a hardware issue (RAM, motherboard, etc..) can be possible too.
As I understood your message, you want to access the data and to backup the necessary files
Well, the Toshiba recovery disk would format the whole HDD therefore you should backup the data before usage of recovery disk.
You could remove the HDD from the notebook and could connect it to another computer using an external USB HDD case.
After backup, you could use the recovery disk to reinstall the Windows.

X79A GD45 Slow start and slow boot into windows with SSD

Im having some major issues with my X79A GD45 board, When I start the system it takes about 30 seconds sometimes more for something to appear on the screen and from cold boot it starts stops and then starts again before loading.
Once its loaded it is taking forever to get into windows Im running 2 6gb/s SSD's in raid and the windows logo is able to appear and flash 3 or 4 times before I even get into windows.
Ive tried it with just a single drive and re installations of windows but get exacly the same thing its driving me mad as Ive spent so much money on this machine. Details of my system are below:
MSI X79A GD45 v1.0 Bios 1.6
Intel I7 3820
Corsair Vengeance 16gb 1600 Cl9
2 x GTX 680 in SLi
Creative Soundblaster 3D Recon Fatality Sound Card
2 x Sandisk Extreme 240gb in Raid 0
Silvertone Strider 850w PSU
LG Bluray Writer

Updated the SSD Firmwares and it made no difference. Ive already tried single drives and the same. The drives are installed into SATA 1 and SATA2 ports the 6gb/s ones. The hang time is atleast 20 seconds at the splash screen alone before loading into windows. I checked the event log for booting and this is what it showed:
Log Name: Microsoft-Windows-Diagnostics-Performance/Operational
Source: Microsoft-Windows-Diagnostics-Performance
Date: 18/10/2012 22:07:07
Event ID: 100
Task Category: Boot Performance Monitoring
Level: Warning
Keywords: Event Log
User: LOCAL SERVICE
Computer: Steve-PC
Description:
Windows has started up:
Boot Duration      :   22130ms
IsDegradation      :   false
Incident Time (UTC)   :   ‎2012‎-‎10‎-‎18T21:05:20.624800300Z
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Diagnostics-Performance" Guid="{CFC18EC0-96B1-4EBA-961B-622CAEE05B0A}" />
<EventID>100</EventID>
<Version>2</Version>
<Level>3</Level>
<Task>4002</Task>
<Opcode>34</Opcode>
<Keywords>0x8000000000010000</Keywords>
<TimeCreated SystemTime="2012-10-18T21:07:07.018586500Z" />
<EventRecordID>11</EventRecordID>
<Correlation ActivityID="{02EB6910-F800-0002-44BE-684874ADCD01}" />
<Execution ProcessID="1268" ThreadID="1336" />
<Channel>Microsoft-Windows-Diagnostics-Performance/Operational</Channel>
<Computer>Steve-PC</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData>
<Data Name="BootTsVersion">2</Data>
<Data Name="BootStartTime">2012-10-18T21:05:20.624800300Z</Data>
<Data Name="BootEndTime">2012-10-18T21:07:04.226181600Z</Data>
<Data Name="SystemBootInstance">8</Data>
<Data Name="UserBootInstance">4</Data>
<Data Name="BootTime">22130</Data>
<Data Name="MainPathBootTime">12230</Data>
<Data Name="BootKernelInitTime">13</Data>
<Data Name="BootDriverInitTime">696</Data>
<Data Name="BootDevicesInitTime">4960</Data>
<Data Name="BootPrefetchInitTime">1575</Data>
<Data Name="BootPrefetchBytes">228585472</Data>
<Data Name="BootAutoChkTime">0</Data>
<Data Name="BootSmssInitTime">4198</Data>
<Data Name="BootCriticalServicesInitTime">190</Data>
<Data Name="BootUserProfileProcessingTime">36</Data>
<Data Name="BootMachineProfileProcessingTime">0</Data>
<Data Name="BootExplorerInitTime">205</Data>
<Data Name="BootNumStartupApps">1</Data>
<Data Name="BootPostBootTime">9900</Data>
<Data Name="BootIsRebootAfterInstall">false</Data>
<Data Name="BootRootCauseStepImprovementBits">2308</Data>
<Data Name="BootRootCauseGradualImprovementBits">0</Data>
<Data Name="BootRootCauseStepDegradationBits">0</Data>
<Data Name="BootRootCauseGradualDegradationBits">0</Data>
<Data Name="BootIsDegradation">false</Data>
<Data Name="BootIsStepDegradation">false</Data>
<Data Name="BootIsGradualDegradation">false</Data>
<Data Name="BootImprovementDelta">0</Data>
<Data Name="BootDegradationDelta">0</Data>
<Data Name="BootIsRootCauseIdentified">true</Data>
<Data Name="OSLoaderDuration">511</Data>
<Data Name="BootPNPInitStartTimeMS">13</Data>
<Data Name="BootPNPInitDuration">5049</Data>
<Data Name="OtherKernelInitDuration">1426</Data>
<Data Name="SystemPNPInitStartTimeMS">6472</Data>
<Data Name="SystemPNPInitDuration">607</Data>
<Data Name="SessionInitStartTimeMS">7083</Data>
<Data Name="Session0InitDuration">3095</Data>
<Data Name="Session1InitDuration">259</Data>
<Data Name="SessionInitOtherDuration">843</Data>
<Data Name="WinLogonStartTimeMS">11282</Data>
<Data Name="OtherLogonInitActivityDuration">706</Data>
<Data Name="UserLogonWaitDuration">133</Data>
</EventData>
</Event>

Added third partition and cant boot into Windows.

So I had windows 8.1 bootcamped, and being the idiot i am, created a third partition, messing up my bootcamp. I am unable to boot into Windows now. I suspect my mbr and gpt are out of sync, but do not know how to fix this. By the way, both disk utility and finder show that the bootcamp partition is there, but there is not option to boot into it on the boot selection menu thingy.

Back up your data. Erase then format the drive. Reinstall OSX and Windows.

Unable TO Login for Window Messenger

I have BB curve 8530, I m unable to login into Window messenger, it say invalid email or password, whereas I m able to login on my laptop using the same details. I tried to Login with a new hotmail account, creating a new account , I changed my password, I deleted the app and re-installed. Unable to figure out the solution. I was able to login yesterday but since today morning i m facing this problem. Need help.
Thanks In advance
Adscurve.

Hello Adscurve,
Try reinstalling the application once again by going to www.blackberry.com/livemessenger on your device browser and test logging in once again. Let me know if you receive any error messages.
Thanks.
-FB
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click "Accept as a Solution" for posts that have solved your issue(s)!

E420 cannot boot into Windows 8.1

I am unable to boot into Windows 8.1 on my Lenovo ThinkPad Edge E420. The symptoms are as follows:
Normal boot (just press the power button): PC freezes on "Please Wait". There are no other buttons or menus available at this time. Assuming this "Please Wait" screen was for an update, I have waited over 8 hers to the point the PC just shuts down... rebooting results the same.
I entered a recovery mode via pressing "Enter" during the Lenovo splash screen and requested diagnostics. The diagnostic was unsuccessful.
I do not have a windows recovery CD/DVD.
Please assist with solution or recommendations.
David

I am unable to boot into Windows 8.1 on my Lenovo ThinkPad Edge E420. The symptoms are as follows:
Normal boot (just press the power button): PC freezes on "Please Wait". There are no other buttons or menus available at this time. Assuming this "Please Wait" screen was for an update, I have waited over 8 hers to the point the PC just shuts down... rebooting results the same.
I entered a recovery mode via pressing "Enter" during the Lenovo splash screen and requested diagnostics. The diagnostic was unsuccessful.
I do not have a windows recovery CD/DVD.
Please assist with solution or recommendations.
David

Qosmio F - Unable to load into Windows or anything

Similar Messages

Maybe you are looking for