Qosmio F10-103, Unmountable_ boot_ volume.......what can I do??
Hi,
I have a Qosmio F10-103.
One day ago the blue page with
the writing ''Unmountable_ boot_ volume''
appeared!
What can I do?
I red on some forums that it (could) be
a problem of the Hard disk and that
I could repair the cpu using the
windows xp boot cd , copying the files
boot.ini , NTDETECT.com , NTLDR ...but.....
Toshiba gave me only the DVD-rom backup,
not xp boot.
Then I tried to use that DVD end I entered
into the Toshiba Recover Utility 1.0.1.0
and I had a disk checking.....the result was:
''Application error 29004
Read sector failure, result =1, drive=128, sectors
132479 to 132481 if the problem persists contact toshiba....''
Here I am!
It's useful to say that all the modes of booting
windows doesn't work.
Also, the ''look-like dos prompt'' that appears
once exit from the recover utility doesn't permit
to copy the file I need from the DVD.
What can I do???
Is there something to do before......the formatting
procedure??
Thanks a lot!!!!!
Hi,
it seems that your Qosmio has a corrupted windows. Like you wrote you can copy the missing or corrupted files from another media. It's right, the Toshiba recovery CD/DVD contains only an image and is a OEM version!
But you can copy these files also from another PC or Notebook. Then take a boot diskette and boot the Notebook. Then copy the files in DOS mode and try to reboot. Then it should work again!
Bye and Good Luck
Rudi
Similar Messages
-
I had to buy a new keyboard but F10, F11 & F12 don't work for the volume. What can I do to activate it?
Hello,
I think Spark cured this for another person and the same problem...
http://www.shadowlab.org/Software/spark.php -
my sound has stopped working i have speakers plugged in but computer doesnt register or recognize them. the volume is on mute and grayed out ...will not let me change,what can i do to fix this problem....i have tried unplugging and plugging back in and reset and headphones...nothing works..how do i get my sound back?
OS X Mountain Lion: If you can’t hear sound from your speakers
Read the "If you’re trying to listen through external speakers" section. -
Since I upgraded to the new iOS 7 operating system for my iphone, I can no longer adjust the volume on my alarm. No matter what setting the volume of my phone is my alarm is always full blast. Since I hate being startled awake, what can I do?
Go to your home screen, and then press the volume down or up button. It should say Ringer instead of volume. If it doesn't do that, try going into the clock app and try it there.
-
I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???
do u have your ipad doing airplay because that could happen
-
Help would be appreciated! Before I upgrade my 10.6.8 OS X I need to back up files. Trying to reformat a WD 1TB external hard drive but my utilities keeps saying "choose scheme from volume pop up menu.." also says "this partition cannot be modified." What can I do?! Take it back to Currys! Many thanks
Select the Top Most Entry for that drive, it will be the drive model # and have the size listed, then go to the Partition tab and select One Partition from the Partition Layout area drop down. Then select Mac OS Extended (Journaled) as the format, if that is the format you want to format it AS. Then click the Options button near the bottom of that windows and select GUID as the Partition Table. Close the options screen and clcik the Apply button.
-
What can be wrong with my iPhone 4s. There is no sound from incoming calls and SMS even when I try to play music.
I already checked that it is not muted, volume is high and not in " vibrate mode."What can be wrong with my iPhone 4s. There is no sound from incoming calls and SMS even when I try to play music.
I already checked that it is not muted, volume is high and not in " vibrate mode." -
I have installed ACDSee Pro3 and have problem to transfer photofiles from device: I got the message; The item could not be edited because you do not have sufficent access privileges or destination volume is no longer available." What can I do?
Ask the ACDSee Pro support personnel.
With iPhoto that message means the library is a referenced library (photo not copied when imported into iPhoto's structure) and the source file is not where it was when first added to the library. I don't know how ACDSee works. Does it have a referenced mode as opposed to copying photos into its structure?
OT -
How can I fix my iphone's sound I plugged it in to my radio and the sound came out fine but when I took it out the volume bar dissapered and ever seince all it says volume not available, but it work with headphones in. What can I do to fix it?
Try reset all settings.
Settings > General > Reset > Reset all settings. It won't delete any data. -
Qosmio F10 with replaced mainboard: Where can I find the right drivers?
Hello guys,
Toshiba service replaced the board with a new one including a geforce 6600 gpu on my F10. So, now I formated the laptop and I want to put again back everything to work. But I see now that there are some different devices, like the 6600go gpu.
Where can i find the drivers (lan, chipset, modem..etc.) On the toshiba web site? If i choose qosmio F10 downloads, I get the drivers for the old motherboard (and graphics card 5700).
Anyone knows where to get the right drivers? thanks!Hello
Check please THIS page.
I presume that chipset driver and also LAN driver are the same. -
My Mac can't find the volume " Data" on Time Capsule, Also I can't find with the disk-utility program the hard disk in the Time Capusule.
So I can't format the disk in the Time Capsule
Deconnevt and then connecting the power tp the Time Capsule gives also no solution.
What can I do?
JoeI listed the commands.. that is how you manually mount the disk.. follow exactly the commands I gave you.
In finder use top menu, go, connect to server.
Type in the following.
AFP://TCname or AFP://TCIpaddress (obviously you replace with the actual name or the actual IP address).
If that fails..
try
SMB://TCname
Here is the screenshot.
tardis4 being the name of my TC.
It should then ask you for your credentials.
And it should remember them in the keychain and be able to then get TM to connect. -
I bought a EarPods October last year in the USA, the day before yesterday the remoter can not work any more, it means by the EarPod still can listen music but can not adjust the volume and answer the phone, can I get a new one or what can I get based on the one year product warrant?
Now I am live in Baoding city, China, what I can do, it seems there is no apple store in my city??
-
I can't control the volume from my iphone 4 headset. What can I do???
I can't control the volume from my iphone 4 headset. What can I do???
Go to Settings > Sounds. There is this option call Change With Buttons. Is it On or Off?
-
I Have An Iphone 4s And When I Listen To Music With My HeadPhones I Cant Lower The Volmume of The Music Beacuse Then It Will Have No Sound I Can Only Listen To The Music With The Volume Loud I Need Help What Can I Do ?
Hi Yendy14,
Welcome to the Support Communities!
The article below may be able to help you with this.
Click on the link to see more details and screenshots.
Troubleshooting iPhone, iPad, and iPod touch accessories
http://support.apple.com/kb/TS2634
Cheers,
- Judy -
My note book volume not enough. what can i do give me a sollution.
my note book volume not enough. what can i do give me a sollution
Hi,
One thing can help is the following. Right click the speaker icon in the Taskbar and select 'Playback Devices'. Left click the default device once to highlight it ( it's usually 'speakers & headphones' ) then click the Properties button. Click the Enhancements tab and put a tick in the box next to 'Loudness Equalization'. Click Apply to save the change and then click OK in all remaining windows and see if this has helped at all.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience
Maybe you are looking for
-
How to disable MOH for "on Hold" button.
CUCM 6.1 When on a conference call if a user presses "on Hold" button, music is played for all participants and nobody can hear anything. How can I disable music on hold for all users? Please note, I could disable MOH for conferencing. But this is di
-
I have recently wiped my hard drive, and just went to reinstall final cut studio when I realized I lost the tiny piece of paper with the registration key on it. This is a student version, and I was wondering if I had all my upgrade coupons if it was
-
Can query serial port with NI MAX, but doesn't work in Labview
I'm trying to control a Coherent Sapphire 488 with labview. It's connected via a serial to USB converter into the computer. I can communicate with a device using NI MAX, but when I try to run the vi (attached), it works for several queries, but evetu
-
IRR report number format after report download
APEX 4.1 I have an IRR report which has a column with data like 1010390000000090. On report download using IRR CSV download option the data appears as 1.01039E+15 i.e. with scientific notation. User wants this column to show proper number and not in
-
Revision: 4074 Author: [email protected] Date: 2008-11-11 14:10:34 -0800 (Tue, 11 Nov 2008) Log Message: FxNumericStepper now has a maxChars property, and it now restricts the characters that can be entered into its FxTextInput. Fixed a problem with