Qosmio F10-125: Picture Enhancement Utility & Media Center 2005

I have an F10-125 and when Toshiba Picture Enhancement Utility is on and Fn F5 is in LCD mode only and you use Media Center 2005 their is a bright mark in all screens in right hand botton of LCD Screen and it is not a dead pixel. I have tried everything and even saw the same model with the same fault in a shop.
But disabling Toshiba Picture Enhancement Utility the mark goes in Media Center but so does the excellent picture quality. is their a conflick between Media Centre 2005 and Toshiba Picture Enhanement Utilty or is their away of getting rid of the bright mark.
Many Thanks

Hi David
Can you please be more specific about Toshiba Picture Enhancement Utility is on? In my opinion you can start this utility, make some desired setting and confirm with OK. Close Picture Enhancement Utility and after that start Media Center.
Did you check is this mark present on some other case like playing DVD or something like that?

Similar Messages

Qosmio G30-102: Why is Picture Enhancement Utility not installed?

Hi-
I have recently purchased a Qosmio G30-102 with nVIDIA GeForce Go 7600. In chapter 6 of the user manual it refers to the Picture Enhancement Utility as part of the QosmioEngine facility. This does not seem to have come pre-installed on the notebook. How do I obtain this program and why is it not already on there?
Thanks
Mark

Are you 100% sure that this application is missing on you notebook???
I ask it because usually the TOSHIBA Picture Enhancement Utility V3.8.0.0 should be installed
The QosmioEngine is active when using the Qosmio Player TV or the Qosmio Player DVD. Furthermore the Toshiba picture Enhancement Utility is available on the nVidia Go7300 models.
If you have nVidia Go7300 graphic card you could check the Windows, Applications tabs in the nVidia desktop Manger

RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's

RE: HP XP Media Center 2005 Ed will not boot from HP System Restore CD's.
The following instructions about the "Code Purple" error FAILED. Error is still present.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
***PLAIN ENGLISH QUICK AND EASY FIX FOR ALL SYSTEMS****
***Windows 7 code purple or Windows Vista code purple***
With the code purple error on the screen, press shift+f10 (the shift key and the F10 key (at the top of the keyboard) at the same time) to open a little screen called a command prompt. (So, you get a little black screen with white text that says something about your Windows verison first and a little ways down you'll see "C:\>".   It's all ready for you to start typing.)
Type the following line, just as you see it here...
notepad C:\hp\bin\checkdmi\checkdmi.cmd
so it will look like this
C:\>notepad C:\hp\bin\checkdmi\checkdmi.cmd
Press Enter.
You will see the text for the file listed in a window using a simple text editor.
Go to the beginning of the text. Press enter to make a space. Type this...
goto cleanup
So, whatever comes after, the first line looks like this...
goto cleanup
Save the file and exit notepad and restart your PC. You are good to go.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
RESULT: Same error and problem.
So, NOW THE SCENARIO IS THIS...[ And A CHALLANGE TO ALL HP Software EXPERTS]
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
1. The PC will not boot the System Restore CD's
2. The Original OS install and [HP_RECOVERY] disk sector has been severely damaged by
all of the following:
   A. Massive Virus Infections as shown by Kaspersky Virus Scan and cleaned up.
   B. The user had originally updated the pc to Vista Business Express Upgrade
       (Supplied by HP with the original purchase and warranty).
        (Prior to the upgrade, Media Center was working correctly.)
   C. The original OS product key(XP Media Center Ed. 2005) has been changed by the Vista Business Express upgrade.
   D. The destructve recovery done by PC-Doctor has done user file damage(s).
   E. All software, and possibly hardware could be corrupted & damaged by viruses,
   incomplete recovery, and the unknown failures and conditions.
To sum up, the system is locked in an unknown state, waiting for expert help.
(I can allow and manage to let someone diagnose, repair remotely using another OS i.e.Linux Opensuse 12.1, or XP Home ed if needed.)
SO IF YOU THINK YOU ARE UP TO THIS CHALLANGE, SEND MESSAGES TO DAVHPForum anytime. Thanks in advance!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Hello @DAVHPForum,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are not able to boot your computer using the HP system restore CDs, and I would be happy to assist you in this matter!
If you are not able to recover your system by following the steps in this document, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Looking to make the leap from Windows XP Media Center 2005 to a new Operating system

Looking to make the leap from Windows XP Media Center 2005 to a new Operating system that supports Microsoft Publisher 2002, Word 2003, Excel 2003, Power Point 2000 and Picture Manager 2003. Need to make the leap since some of my other software is requiring
a system software upgrade to upload any other upgrades (Garmin for example). I ran windows 8.1 software compatibility check and know this software will not work on 8.1. Does anyone know if this software works on Windows 7, 7 Pro, or Ultra?

Hi Paul,
You may take a try with Windows 7 Upgrade Advisor, download and run the Windows 7 Upgrade Advisor to see if your PC is ready for Windows 7. It scans your hardware, devices, and installed programs for known compatibility issues, gives you guidance on how
to resolve potential issues found, and recommends what to do before you upgrade.
You could download it from here:
Windows 7 Upgrade Advisor.
If you want to upgrade Windows XP to Windows 7, you may follow the guide below:
Upgrading from Windows XP to Windows 7
Besides, I would agree with what Team Zigzag suggested, run Windows 8.1 and create a Windows XP virtual Machine, then run the applications from there.
Best regards
Michael Shao
TechNet Community Support

Acrobat 9 Products with Windows XP Media Center 2005

Hello,
I'm wondering if any users are running Acrobat 9 Standard or Pro on Windows XP Media Center 2005. I'm currently annotating pdfs for a client but was leery of purchasing Standard or Pro because Media Center is not mentioned under the System Requirements for these products (only Windows XP Home, Professional, and Tablet PC editions are listed). So I had my client enable the pdfs for annotation and then send them to me. I began annotating them in Acrobat Reader 9. This worked for less than a day, and then when I reopened the documents, I received a message saying "This document enabled extended features in Adobe Reader. The document has been changed since it was created and use of extended features is no longer available." The Comment & Markup toolbar and the Comments option under Documents have disappeared, and I can no longer make changes to the documents.
Do other users have issues with Standard, Pro, or Reader operating on Media Center? Any help would be appreciated. Thanks.

It will work on either of those operating systems.

Bootcamp and Media Center 2005

I have a full version of media center intended for any pc and whenever i try to install it on my macbook pro via leopard, the entire install process will go through, but after install i boot to windows and i get a disk error. Any ideas. I was able to install this exact same OS via the bootcamp beta, and even after the upgrade to leopard, the MCE 2005 os worked. But after i did a comlete os install of leopard, i can no longer use leopards boot camp to install this os successfully. Any ideas, or where can i get a old copy of bootcamp beta?

I just installed Windows w/Media Center 2005 on my iMac core2duo 2GHz 2GB ram with Leopard two nights ago. I received the same issue on my first install attempt. Boot camp creates a Fat32 partition, so I used the convert to NTFS when I installed Media Center. I thought it worked until the restart. I had to reformat the partition NTFS and install again. This time with no problems.

Need driver for XP media center 2005

Hi
I have TV anywhere
was working with XP pro
I did upgrade my system
now I have XP media center 2005
Reinstalled the MSIPVS TV @nywhere card.
I got my video but no sound
need help

MSIPVS:TV@nywhere 8876 ver1.00
Conexant CX23881-27 E232040.1
N1996
in XP I did use
The MSI PVS software version 2.0.34.198
audio /video are good
using the same driver for xp media
got video but no sound
system has realtek sound card
system =acer E380

Qosmio G30: No Sound in Live TV - Media Center 2005

For two months I have been using a Qosmio G30.The sound is good from all the functions on the PC except Live TV in the Media Center Edition 2005. The picture is good except there is no sound..I have checked all the forums and cannot find a solution to this problem.
Hope someone can help me.
Alick

It depends on the country you are living in...
please look at this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18085&tstart=320
My solution to the same problem related to the country settings in media center:
I needed to change the country settings from Romania (where I am living) to Germany!
that's all...

TV Tuner Qosmio F10-125

I have just taken delivery of an F10. Excitedly I connected the jack at the back of the PC to the ordinary Arial and searched for the signal by auto scanning using the media wizard. No signal was detected. I tried using the RF analogue signal from my Sky digi-box that must be a good a signal as one can get. Still nothing. In both cases the co-axial cable was carrying a healthy signal as evidenced by the TV happily playing all the channels on the cable from both sources
Any one know what to do? or is this wonder Qosmio F10 a joke!!
Message was edited by: Ronaldat

Hi,
I don't have the PC in front of me ... it's my son's and presently several hundred miles away, so I'll have to do this by memory (which at my age isn't too reliable, so I apologise in advance if I mislead anyone.
>> By MCE do you mean media centre?
Yes - acronymn for Media Centre Edition (which takes far too long to type).
>> How does one use the QosmioPlayer tuner? I don't understand F2/setup??? I've tried pressing F1 then F2 but nothing happens.
With the G10 (and I don't know about the F10) you can start up Qosmio player without booting the PC (by pressing the TV button at the back of the keyboard area). Initially (i.e. without setting up the tuner) I got pretty much a blank screen. Pressing F1 brings up a window with a set of options in two rows - one of which is F2 - Setup. After pressing F2 it didn't take much effort to find an option to do an AutoScan which worked very easily and in about 2 or 3 minutes, I think.
Once this ran through I found that valid signals were distributed fairly randomly through the 1-63 possible channels - I can't remember the numbers exactly but BBC1 was at channel53, Channel 4 at 27 and so on.
You can tinker with the settings such that when you select Channel 1 on the main TV player, this actually shows Channel53 (or whatever) so you can configure it for (say) channels 1- 5 to reflect the more obvious setup.
Having got this under control (more or less), I then went back to try Media Centre - configured the TV Tuner to PAL/Secam manually and could then find regular BBC, ITV etc ... again scattered at random channel numbers across the tuner. I've no idea how to rationalise these .. and I think someone else has asked this question on the Forum.
I used a decent rooftop aerial to plug into the Toshiba ... the pictures for ITV1, Channels4 and 5 are perfect, BBC1 and 2 are poor. Not sure why this should be so since they're OK on my regular TV - maybe someone wants us to watch the adverts!
That's about as much as I know, I'm afraid.
>>Still waiting for a phone call after 3 days.
You have my sympathies ...
FrankW

Mega 180 Radio working under XP Media Center 2005

Hello,
i'm quite fond about Windows XP Media Center 2K5 and would like it to control the Mega 180's radio unit. I would like to know if there are people that have already looked for ways to control the radio. It could be a start to implement some kind of Media Center plugin...
Greetings,
Peter Vrenken

the problem is the fact that the radio tuner isn't a "physical" device that Windows recognises
damn MSI and their proprietory hardware!! surely some sort of USB tuner "hardwired" to the USB controller would have been a better solution? grr, but then how would that have worked in Hi-Fi mode...

Can I download recover disc 2 for HP Pavilion Media center 2005 edition

I had to recovery it and I could not find disc 2 and disc 1 has loaded

It is not possible. Recovery disks are created to match the system's installed applications and OS.
You can purchase a new set from:http://www.computersurgeons.com/SearchProducts.aspx?sbt=dv6125se&bkm=Results#Results
435337-001
Operating System:
Windows XP Media Center Edition
Number of CDs:
$27.00
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

[Athlon64] msi k8t neo2 and media center 2005

installing mce 2005 and via driver 5.04A video doesn't display video on media center screen
my configration is
msi k8t neo2-f
nvidia 5200fx
2x 512mb dual ram
2x wintv pvr mce 150
300 gb maxtor sata

Quote
video doesn't display video on media center screen
what nvidia drivers are you using here? need 53.04 or later for MCE support
does any video play, Live TV, DVD, other video? make sure you have a compatible MPEG2/DVD decoder installed (PowerDVD 6+, WinDVD 6+, Nvidia PureVideo Decoder etc)

Media in CD / DVD drive not writeable by Media Center

I have a Qosmio F20 laptop running Windows XP Media Center 2005 edition, when I try and record my recorded tv program onto a DVR+RW I get the following error message,
Media in the CD/DVD drive is not writeable by Media Center
I have update rollup 2 installed.
Rgds

Many thanks for the info above. Ive looked at those pages but was not able to find the solution.
I can record using the installed Sonic recording package onto all of my discs, CDR CDRW DVD+RW with no problem.
I just wanted to record via Media Center in the hope that it would play on my DVD player attached to my TV.
My CD drive model is UJ-840S so I hoped I woudnt have the problem. As the info from Microsoft says that its
the UJ-846S that may not work without installing Update Rollup 2 for Media Center.
I saw the following explanation on the Microsoft page http://support.microsoft.com/kb/909083
The computer is using a DVD-RAM drive that was not supported in the initial release of Windows XP Media Center Edition 2005. For example, the problem is known to occur when you use the Matsu****a DVD-RAM drive model UJ-846S. This drive was not supported in the initial release of Windows XP Media Center Edition 2005.
Update Rollup 2 for Windows XP Media Center Edition 2005 adds support for additional drives, including the Matsu****a DVD-RAM drive model UJ-846S. Without these updates installed, the UJ-846S drive will correctly recognize DVD-R, DVD-RW, and DVD-RAM discs. However, the drive will not recognize CD-R, CD-RW, and DVD+RW discs.
To determine the model of optical drive that is installed in the computer, follow these steps:
1. Click START click RUN type MSINFO32 and then click OK
2. In System Information expand COMPONENTS
3. Click CD-ROM The mode of the optical drive is displayed in the NAME section.
I will keep trying various Microsoft solutions and come back If I find the answer.
Thanks again.
Mike
Message was edited by: miketurner201

Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
Last Update 3 Oct 2006
Important Notes Before You Start:
1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
6- Disclaimer of liability
I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
Steps:
1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
"If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
A- Q896256
FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
B-Q910437
FIX "High Hit Count Watson Crash In Wu Client"
C-Q889673
FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
FIX "ADD Support The High Speed SD Card"
Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
(Restart Your PC After You Finish The Installation)
Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
Atheros Client Utility " No Need"
Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
Enjoy Your Powerful Toshiba Qosmio Laptop.

you can see this tutorial also in this website
salah.coms.ph

Black thumbnails and pictures in Media Center in PE8

Hi,
I've had this issue for years (in PE6, 7 and now 8) and on various Windows versions (XP MCE, Vista and now on W7 x86 and x64) but I've finally decided to try and do something about it as I'd really like to be able to use the MC plugin.
As the title says, some of my pictures appear black (both the thumbnail and the picture itself) in Media Center. All my pictures are fine in the desktop version of PE8. It seems to happen exclusively with pictures that are taken vertically (portrait orientation), those in landscape are fine. But some portrait pictures (though very few) appear fine too. I've also found out that if I open a "black" picture in the Editor and save it (without changing anything), then it will appear fine in MC. And I've noticed that it's only happening with my camera (Canon Ixus 860 IS) although I had the same problem with my 2 previous cameras (both Canon PowerShots). The memory cards were different too.
I'm pretty baffled by all this and I really don't know what I could do to sort this out. If anybody has had the same problem or if anyone can think of a solution, any helps would be greatly appreciated!
Here's a picture to illustrate what I'm talking about:

My suspicion is that your problem correlates to a photo orientation indicator set by your camera in the photo file.
some ideas
--Choose one photo which displays black in Media Center
-- In the PSE Organizer thumbnail area, select that photo and display the Organizer Properties panel/window for that photo. within the Camera Data of that Properties window you are looking for an Orientation field - what does it say ?
-- Now in the Organizer, rotate the thumbnail of that same photo 90 degrees to the right or to the left and then rotate it back in the other direction
-- Do whatever you may need to do to refresh your display through Media Center and check if this photo displays OK.
After you post back with your results, we can discuss in more detail the what and the why. If my theory is correct the solution should be easy.
FYI - I suspect that your identifying that the problem was specific to portrait photos which had not been edited will be very significant in identifying what is happening. Good analysis.

Qosmio F10-125: Picture Enhancement Utility & Media Center 2005

Similar Messages

Maybe you are looking for