Qosmio F10-136 - Unable to install any drivers

I have a Qosmio F10-136.
I have recently formatted the hard drive. Since I had lost the recovery disc, I had to use another copy of Windows. I downloaded the drivers available online from the Toshiba website but I have been unable to install any drivers except the wireless LAN. Most driver setups refuse to run at all, some seem to install the files, but the driver is not detected.
Please advise.

> 1. Sound device not working still - When I install the audio effect driver (i.e. toshiba virtual sound), there does not seem to be any effect even though it is installed. Then, when I install the SoundMax Audio System, it gives me an that the driver does not exist.
What do you mean exactly by does not seem to be any effect. Can you hear the sound coming from the speakers? Are there any yellow exclamation marks related to the sound card? If not then the sound card driver has been installed properly and the sound should work!
> 2. I cannot figure how to install the LAN driver.
Where is the problem? Download the LAN driver, unzip the package, access the device manager, choose the unknown device (LAN card), point to the driver files downloaded from the Toshiba driver page and finish the installation.
The LAN card should be recognized properly.
> 3. Same with the TV tuner drivers; there is not setup file.
As mentioned above; you can install the drivers in device manager. Choose TV tuner in device manager (possibly marked as unknown device too.) point to the TV tuner driver files and finish the installation.
> 4. During the windows setup, I had created 3 drives, but I cannot access the drives D & E. When I try to access them, windows asks me to format them, but it gives me an error when I try to do so. Also, the hard drive is not shown in the disk management (not even C drive), so I cannot do anything. Although, the hard drive is shown in the device manager.
If other partitions have been created on the HDD then this should be visible in disk management. I dont believe that you cannot see even the C partition. In my opinion you didnt check this correctly.
Access the disk management (MY Computer, right click, manage). Choose Disk Management. There you should see the HDD and CD/DVD drive.
If the partitions have been created but not formatted then you would see just a free space.
Click right on this space and you could either format this or could delete the partition.
PS: I recommend using a 3rd party tool like Partitions Magic in order to create the partitions on the HDD (Win XP)!!!

Similar Messages

  • Qosmio F10-136 display drivers/video controller

    I am in the middle of resintalling everything on my Qosmio F10-136 laptop. I have used the display drivers from the Toshiba website. However, in the device manager the video controller is showing an error and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling pages up and down in IE is very slow.
    Also when I go to display properties settings-advanced-adapter the graphics card is not shown under adapter type.
    Anyone know what the problem is? Do I need to download drivers from somewhere esle?
    Thanks,
    Ben

    Hi
    The graphic driver released on the Toshiba European driver page is working and can be installed properly.
    I think you did something wrong.
    Try to reinstall the graphic driver again.
    Remove the graphic controller from the device manager list and reboot the notebook.
    Then try to reinstall the driver again. I would recommend installing it in device manger.
    Choose graphic card, update the driver, then point to the downloaded graphic driver and finish the installation.
    Cheers

  • Unable to install any upgrades

    I am unable to install any updates on my MBA with OS X 10.7.2. They all result in "An unexpected error occured". I have tried with lots of different updates, firware update, Lion update etc with the same result.
    Any ideas?

    The code below is from trying to install update "Airport Utility" version 6.0 from The standard OS X Software Update function. The user (me) is prompted with "An unexpected error occured". I have tried with EFI Firmware, Max OS X Update combined 10.7.3, All packages. The result is allways the same.
    Thanks, Jesper
    Feb 21 08:57:57 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
    Feb 21 08:57:58 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ->T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: inHostDiskUDS=0x103c08c20=disk0s2=Macintosh HD inWhatStr=RecoveryInfoBaseSystemVersion
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did get booterRecoveryUDS=0x103c08ae0=disk0s3=Recovery HD
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did mount nobrowse; MP=/Volumes/Recovery HD OMS=0x7fa05b116de0
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: getting dict from file=/Volumes/Recovery HD/com.apple.recovery.boot/SystemVersion.plist
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: got dict (or NULL=will return err): oooInfoDict=0x7fa059605b60
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM ..T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: did if-needed-best-effort unmount
    Feb 21 08:57:58 Jespers-MacBook-Air diskmanagementd[278]: DM <-T-[DMToolBootPreference recoveryPartitionInfoForVolume:what:dict:]: retErr=0 outInfoDict={
                  ProductBuildVersion = 11C74;
                  ProductCopyright = "1983-2011 Apple Inc.";
                  ProductName = "Mac OS X";
                  ProductUserVisibleVersion = "10.7.2";
                  ProductVersion = "10.7.2";
    Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
    Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: Firmware is up to date.
    Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: model = MacBookAir4,2
    Feb 21 08:58:12 Jespers-MacBook-Air Software Update[259]: JS: 10.7.2
    Feb 21 08:58:14: --- last message repeated 4 times ---
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:CLX-3180 Series
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Connected printer: MANUFACTURER:Samsung;MODEL:Samsung CLX-3180 Series
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[259]: JS: Printing drivers update available for Samsung_Common. (return value 2)
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
    Feb 21 08:58:14 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
    Feb 21 08:58:17 Jespers-MacBook-Air Software Update[259]: Calculated need 7324.112 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
    Feb 21 08:58:51 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.636 MB free; 19252.345 MB available with MTM reclaim
    Feb 21 08:59:03 Jespers-MacBook-Air Software Update[259]: Calculated need 1393.781 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
    Feb 21 08:59:18 Jespers-MacBook-Air Software Update[259]: Calculated need 1423.282 MB; 19234.632 MB free; 19252.340 MB available with MTM reclaim
    Feb 21 08:59:20 Jespers-MacBook-Air Software Update[270]: Acquired Lock: 503, 259, 0
    Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: ----- Begin install -----
    Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: request=PKInstallRequest <1 packages, destination=/>
    Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: packages=(
                  "PKLeopardPackage <file://localhost/Library/Updates/041-1440/AirPortUtility.pkg>"
    Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Skipping component "com.apple.AirPortBaseStationAgent" (1.5.5-155.2.0-155002000000000-*) because the version 1.5.5-155.7.0-155007000000000-255 is already installed at /System/Library/CoreServices/AirPort Base Station Agent.app.
    Feb 21 08:59:51 Jespers-MacBook-Air installd[264]: PackageKit: Extracting file://localhost/Library/Updates/041-1440/AirPortUtility.pkg (destination=/var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root, uid=0)
    Feb 21 08:59:52 Jespers-MacBook-Air installd[264]: PackageKit: update_dyld_shared_cache -overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
    Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: xpchelper --rebuild-cache --overlay /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/Cleanup At Startup/PKInstallSandbox-tmp/Root
    Feb 21 08:59:55 Jespers-MacBook-Air installd[264]: PackageKit: Executing script "./preinstall" in /private/tmp/PKInstallSandbox.scmLrH/Scripts/com.apple.pkg.AirPortUtility.7SWC9 k
    Feb 21 08:59:56 Jespers-MacBook-Air installd[264]: PackageKit: Install Failed: Error Domain=PKInstallErrorDomain Code=112 "An error occurred while running scripts from the package “AirPortUtility.pkg”." UserInfo=0x7fc91c89f3a0 {NSFilePath=./preinstall, NSURL=file://localhost/Library/Updates/041-1440/AirPortUtility.pkg, PKInstallPackageIdentifier=com.apple.pkg.AirPortUtility, NSLocalizedDescription=An error occurred while running scripts from the package “AirPortUtility.pkg”.} {
                  NSFilePath = "./preinstall";
                  NSLocalizedDescription = "An error occurred while running scripts from the package \U201cAirPortUtility.pkg\U201d.";
                  NSURL = "file://localhost/Library/Updates/041-1440/AirPortUtility.pkg";
                  PKInstallPackageIdentifier = "com.apple.pkg.AirPortUtility";
    Feb 21 08:59:56 Jespers-MacBook-Air Software Update[270]: Releasing Lock: 503, 259, 0
    Feb 21 08:59:56 Jespers-MacBook-Air Software Update[259]: Error: An error occurred while running scripts from the package “AirPortUtility.pkg”. (PKInstallErrorDomain code 112)

  • Can anyone help me?  I recently bought a secondhand PowerBook G4 but there was no installation discs, where can I obtain a set as I am unable to install any software.  Many thanks.

    I recently bought a secondhand PowerBook G4 but there were no installation discs with it and at present I am unable to install any software, where is it possible to obtain a set of the discs so that I can reinstall the software to try and resolve this problem.
    Many thanks.

    You may also want to try eBay. Finding disks for a machine that old will be difficult though.
    Best of luck.

  • After installing Trend Macro antivirus, I was unable to install any plugins. I get an "Unexpected Installation Error" message at the end of the installation. Closing the anti-virus does not help.

    I have purchased Trend Micro Titanium Maximum Security and am now unable to install any plugins. I have had these plugins before and had no trouble with them but now they have disappeared. I tried closing the antivirus and added mozilla.org to the exceptions list but it did not help.
    I have copied the text of the error.
    Firefox could not install the file at
    https://addons.mozilla.org/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=search
    because: Unexpected installation error
    Review the Error Console log for more details.
    -203

    http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203

  • Unable to install any software on Nokia E5-00

    Hi, I have updated my E5 software from .042.010 to .042.014 on 06/06/2011, after the updation I am unable to install any kind of software on my cellphone. At the time of installation, it somehow stop responding and I have to restart the phone to continue my work. Please advise what to do. RV

    @rvdelhi
    Although you would need to backup essential data first, it may be worth resetting device to "Out of box" state by keying in *#7370# followed by 12345 (default Nokia lock code unless altered by yourself).
    Happy to have helped forum with a Support Ratio = 42.5

  • Unable to install any version of iTunes

    Hi there,
    I am unable to install any version of iTunes as I get this error message "C:\program files\itunes\mozilla plugins\npitunes.dll verify you have access to that directory"
    Can anyone help please?
    I don't even have Mozilla Firefox installed!

    Follow the steps outlined in the KB article: http://docs.info.apple.com/article.html?artnum=93976 and then try to reinstall iTunes.
    Rachyl

  • Unable to Install any packages in Fink

    I am unable to install any packages either via Fink commander or via the terminal. I was able to install some just the other day, so I don't know what went wrong.
    I have not been able to get Fink commander to see any package lists, despite following every bit of advice I could find in these forumns and on the net. Also, I updated the repositories rsync as instructed on the net. I can see the list of Fink packages by running "Fink List". However, when I try to install "sudo apt-get install xyz package" I connstantly receive the error "xyz package not found".
    I'm sure this is a case of operator error, only I don't know what that error might be. I would be most grateful for anyone's help in this regard as I really enjoyed the Fink programs like kdegames that I was able to install before I started having this problem.
    My thanks to everyone for any assistance they can provide.
    Message was edited by: PugetSounder

    I appreciate your previous response, instructing me to enter "source /sw/bin/init.sh as a user in order to run Evolution.
    My problem is that this solution only lasts until I logout. When I log back and and try to run evolution via terminal, I receive the error "Command not found". Once I enter your instruction again, all is well-for that session.
    Is there a way I can do this globally and make it "stick"? By making it stick I mean so that I don't have to do it each time I want to run evolution.
    These issues of course don't happen when evolution is run as admin user. Also, it's worth noting that evolution is the only fink program that causes these problems. Other KDE programs like kgeography and kmahjongg don't have such issues.
    I appreciate any feedback you can give with this issue.

  • Unable to install any apps..did reset, reboot, restore but nothing works

    unable to install any apps..did reset, reboot, restore but nothing works

    so you want to restore as new not from a back up and then try to download a application. the purpose for this is the fact that if you restore from a back you then your just putting the save soft ware back on your phone. and if soft ware is the issue then this step just got voided out. if that doesnt work or you did do that then it can be something hardware related and it can be replace through apple for free if your under the hardware warranty

  • I am unable to install ANY Adobe product on my Macintosh

    I am unable to install ANY Adobe product on my Macintosh
    iMac running 10.9
    Tried to update Adobe Reader and was unable to.
    Removed Reader and tried to reinstall, no luck.
    Now my copy of Adobe Acrobat Pro will not run or reinstall.
    I have spend over an hour with Adobe tech support only to be told that they will escalate it to someone else.

    Just to let you know,
    I applied this procedure today http://forums.adobe.com/message/5780749#5780749
    and it solved all my issues, CCDesktop and PhotoshopCC correctly installed and up and running now.
    Regards,
    Roberto

  • I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

    I have paid up for a Teachers account and am unable to install any program. I keep getting directed to your 'Trial has expired'.

    Hi Pamela,
    You can follow the article: Activation & deactivation help which might be helpful for your activation issue.
    Please let us know if it works or if you still face any issue.
    Thanks,
    Ratandeep Arora

  • Qosmio F10: ERROR: "Unable to ACPI Name Space!"

    The original motherboard with 855PM chipset was exchanged at Toshiba German service during the warranty period for the new one with another chipset (915 or 910).
    The Toshiba "Common modules" were successfully running with the new motherboard until there was some trouble with Windows XP and I had to reinstall it. After that I try to install "Common Modules" Toshiba V.6.02.00" on my Qosmio F10 with XP Proffesional and SP2.
    I have got a message "Unable to ACPI Name Space! GNS.exe terminated." The error appears 5 times, before laptop show me Next button and when i push "This is not and ACPI System" It's not possible to install ACPI device of toshiba" error appears and close the "Common Modules Toshiba V.6.02.00" application.
    In addition when trying to shutdown Windows XP, the "Standby" button is deactivated and computer is not able to shut down automatically but requires to press "Power" button at the end.
    Any ideas if it might be some kind of software or BIOS problem? Motherboard failure?
    Please, help.

    Hi
    Thanks for the hint. Actually, I have got the driver CD from the service and used it.
    Now I found the solution. The reason for the ACPI failure was that I integrated the new XP updates and the drivers from the CD into my installation package.
    This installation did not work. However, after I reinstalled XP from the older installation package from summer 2006, the ACPI is running again. Thus, the correct procedure is, at first, to install the XP, then to install the drivers, and then, to install the XP updates.
    Best regards,
    Filipp

  • Qosmio F60 Win 7 clean install plus drivers

    Hi
    I would like to clean install win 7 64 bit on my F60. I've already worked out how to change my boot sequence, [ with the help of this forum], so I'm ready to format & reinstall. However my concerns relate to reinstalling drivers specific for the F60.... Any advice on this process would be appreciated. Is it a matter of just downloading from [http://www.mytoshiba.com.au/support/notebooks/qosmio/f60/pqf65a-00y002/download?os=25] & installing as I need. Can this be tricky?
    Any thoughts & guidance appreciated
    Regards Lantana
    Also would like to update bios...is there a step by step process for that too?

    I have a Qosmio F60 & have done a clean install. I'll run you through the steps.
    1. Make recovery disks before doing anything else. It's a good backup should there be any problems & will allow you to return the laptop to "out of the box " state if you want. Once the Recovery disks have been made (about 3 or 4 DVD'S), you can delete the recovery partition, but if you're unsure I would leave it as is.
    2. There is a folder containing all your drivers and programs on the C drive. Back it up to DVD or a USB drive.
    3. Back up your activation information. I used Token Restore (Google it). Back up your data.
    4. Install WIN7, use the advanced option, reformat your C drive. Make sure you install the same Win7 version that came with your laptop (ie Home Premium, Pro ect). Don't enter your activation details at this time, but use Token Restore to do this after installing your drivers. After you install Win7, you'll have basic functionality, ie your mouse touchpad will work, cd drive will work ect. Display will be at a lower resolution.
    5. Install drivers & utilities. I installed the following in this order.
    Intel chipset driver
    Intel turbo boost driver
    Intel management engine interface
    Intel rapid storage driver
    NVIDIA display driver
    Realtek audio driver
    NVIDIA HD audio driver
    Dolby Control Centre
    HDMI Control Manager
    Realtek LAN driver
    Realtech Wireless LAN driver
    Bluetooth Monitor
    Toshiba Value added package (custom install... I didn't install Zooming Utility)
    Ricoh card reader
    Synaptics Touch Pad driver
    Winbond CIR driver
    Yuan DVB Tuner driver
    Toshiba Eco Utility (optional)
    Toshiba HDD Protection
    Toshiba Disc Creator (optional if you have other CD/DVD burning software)
    Toshiba DVD Player (optional, it upscales DVD's, but not much improvement over WMP for playing DVD'S)
    Toshiba Remote Control Manager
    WinDVD BD (for playing blu-ray) & the update downloaded from Toshiba website.
    6. Install your own software, antivirus, data, restore your activation information then run Windows Update. Also worth running a good defrag program like MyDefrag or Puran Defrag (both free).
    I would install the recently released BIOS update prior all this.
    It is possible to trim the installation back even further, but I find this gives me full functionality while removing most of the bloat. I do find this better than simply uninstalling unwanted programs, as some like Norton AntiVirus are almost impossible to fully uninstall.
    Hope this helps.
    Message was edited by: Richo

  • Unable to install any adobe product

    Recently I uninstalled my Adobe InCopy and InDesign (CS6) applications using the Adobe installer. Something went wrong with one of them, as it did not properly uninstall CS6 and instead displayed an uninstaller error.
    I've been troubleshooting for a couple of days now, installed the Adobe Cleaner tool and used it, went through tons of forum posts and the result is what I can only describe as a disaster.
    Currently I am unable to install pretty much any Adobe product as every installer gives an error when trying to run it.
    A list of the issues I have found:
    - Adobe Application Manager does install, but produces a "Download error. Please contact customer support." with a Quit button when opening it.
    - Adobe InCopy CS6 and InDesign CS6 installers fail with the message
    - Adobe Acrobat Reader DC hangs on 90% for a while during installing and then says "Installation failed"
    - Consequently, trying to download a Photoshop trial also gives the same error when it tries to launch the Application Manager.
    - I do seem to be able to download Creative Cloud separately, but when it opens (which takes a while) I just get an eternal spinner.
    I'm using a Mac with OS X Yosemite (10.10.2). Previous to the errors I had been able to run Adobe products for over a year without issues.

    Hi Koen,
    As we are encountering a couple of errors, let’s try to take them down one by one.
    Firstly, let’s work on Download error and spinning wheel.
    https://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    App doesn't open | Progress wheel spins continually
    Kindly try these links and share the results so that we proceed further.
    Thanks,
    Atul Saini

  • Windows won't install any drivers using BootCamp

    I'm new to using a Mac (I bought an aluminum 2.0GHz MacBook last month). I need to run Windows on it, and tested in using BootCamp, but I cannot get the Windows XP drivers to work at all. No drivers have been installed for networking, chipset, sound, video, etc.) The device manager shows almost no drivers installed. It is Windows XP SP3 as well. I have also tested this on two other Macs, with the same results. What am I doing wrong?
    Thanks in advance for any replies received.

    If you have Auto-run enabled (not always a good idea though) it will still open to
    /BootCamp folder with Apple Setup.exe to install the drivers and services to add compatibility.
    I think Windows Update, esp. now with v. 7 RC1, it finds even 3rd party drivers for me and less trouble, something OS X doesn't provide.
    But the step for inserting your DVD.... that is in the Boot Camp Guide and pdf.

Maybe you are looking for