Qosmio F10 additional software DVD broken

Hi all,
I was wondering if anyone kind enough could help me. I had to format my computer recently and re-install everything. However i managed to sit on one of the disks which was lying on my bed at the time and broke it. Its the Addition Software CD (PMR400262EU0). The problem is that the Intervideo WinDVD player toshiba build specific for Qosmio engine software is located on there and you can not download it from Toshiba website nor from Intervideo.
Next problem is my laptop is refurbished and over one year old, i have contacted the retail store i bought it from and no help, also contact thoshiba support and they can not help me either as the software is not carried under warrenty and they wont replace it. So i was wondering if someone could send me a copy, as proof i have the original dvd-rom that i broke. i could send a picture of it or the actual thing with a blank dvd if need be.
thanks for your kind help and regards,
Alex

Unfortunately, the OEM Toshiba software could be delivered only with the notebook and cannot be interchanged or shared.
You can order this CD from the Toshiba service partner. Of course, the CD and DVD are not covered by warranty but you can buy it. I think you need some vouchers.
However, it should be possible to buy the CD and I dont think thats expensive

Similar Messages

Qosmio F10 - VHS to DVD

Hi all
Any tip on how to convert a VHS movie into a DVD than can be played on a conventional DVD player would save me a lot of headache (such as conversion format, size, etc...).
It seems that I only have Windows Movie Maker installed on the F10.
Thank you in advance.

visit VHS to DVD and transfer your home video tapes to dvd. You can get a pretty good conversion at a reasonable price from a lot of places. But what are most of these companies lacking? Care and attention to detail! Other ways you get totally amateurish product done with domestic equipment.
link: http://www.vhs-to-dvd.com/

Do I need any additional software to burn on dvd disc in mac book pro

How do I burn images on dvd on my Mac book pro
setty prabhakara

Do I need any additional software to burn on dvd disc in mac book pro
No.
How do I burn images on dvd on my Mac book pro
Help here > Disc Burning Quick Assist

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this.

If I download a video from my video camera to a new (current 1/12) iMac 21 inch, how can I burn it to a DVD using the computer itself. Is this possible? Do I need to buy additional software. Two salespeople at the Apple were a little confused about this. Thank you.

The DVD recorder I'm referring to is one I've use for years. It is not attached to my aging iMac in any way. I simply play the video from my camcorder (mini-dv tape based Canon HV20) into the DVD recorder and create a DVD that can be played in any DVD player. I can only do minimum editing so what goes in is what I get. This has been fine for creating dupes of the various things I shoot.
If I buy a new iMac (21 inch), I'd like to be able to download the video to the iMac through iMovie, work with it to whatever degree I wish, and burn it to a DVD that can also be played in any DVD player -- or to use as a master to dupe copies.
What I'm understanding from you and others is that this would be possible if Apple had included iDVD in the software that comes with the iMac, or if I purchase the iLife Family Pack, or buy the correct version of Toast. I'm hoping I can persuade Apple to sell me an iMac with iDVD installed.
Essentially I want to move from a basic process of creating DVD copies to the more sophisticated process of creating one from an iMac.
Thank you again for your help and wisdom.

My Qosmio F10 doesnt burn CD's or DVDs

Hi all..please i need help..my Notebook(Qosmio F10) is not budrning any cd's or dvd's!!!! i really dont know why..i already tryed to install a new DVD-Rom new soft ware but stilln ot working..it reads only but when i wanna brun is not working!!!!!HELP

Hi
In my opinion your drive is defective. Laser position for reading or writing is not the same. If you want to test it remove drive from device manager and restart the unit. Check the burning option also with Nero burning program. If there is no success I presume that drive is defective. Contact service partner and if the warranty is still valid the drive should be changed for free.
Bye

Qosmio F10: Recovery DVD doesn't work?

Hi. I have a F10 series qosmio series lappy and well and well i keep getting random shutdowns, freezes, and a logon error every time i start up.
This has got very disturbing for me. I tried to use the system recovery cd i got with my laptop and when i follow the procedure stated in the user manual it starts the recovery then flashes that my system does not support the recovery.
Is this normal especially when i got my recovery disc with my laptop. I wish to reformat my hard drive back to factory settings and have it completely wiped with out having to buy a totally new hard-drive and windows xp.
What do i do and how can you assist me in this? I'm at the end of my teather as one of my jobs is an internet dj and I cannot keep crashing in the middle of my streaming. I do not wish to loose my job!!
please help!

Hi
Very strange! The fact is that you cannot use different recovery CD because every Recovery CD was designed for one Toshiba notebook model. For example you cannot use a Qosmio F10 recovery CD on a Qosmio G20.
However, I assume you use the delivered recovery CD (as you said) and usually the recovery procedure should works without any warnings or error messages.
In my opinion there is something wrong with the CD. Maybe the wrong CD was shipped with this notebook?
I recommend asking the Toshiba ASP in your country. There you can also order the new CD.
bye

Qosmio F10: Monitor screen looks like an Andy Warhol picture

I am currently having problems with my monitor screen looking like an Andy Warhol picture. I have resorted to going through the Product Recovery DVD-ROM for my Qosmio F10/G10 Laptop in the hope that reverting it back to the factory settings would solve the problem but it hasn't.
The screen breaks down after the Windows welcome screen, leaving me with my desktop all Andy Warhol like (i.e. blocks of pixilated colour at the edges of the graphics). I have tried to reset the resolution which solves the problem to an almost acceptable level but on a temporary basis, because the problem re-appears again when I re-boot the laptop.
I think that it is something to do with the Windows Multimedia Operating system that was preinstalled on my computer (so no recovery disc). The reasoning behind this assumption is that I put a DVD film into the Multimedia that is part of Windows XP and the film is a moving Andy Warhol video.
I put the same DVD into the WinDVD that came as a Toshiba additional content and the DVD is perfect! My reasoning is, that if there was something wrong with the hardware of the Laptop, then all DVD reading programs would react the same way, but as they do not, it must be a programming (or operating system problem).
Am I on the right lines? Is there a way to solve the problem via a downloadable file?

Thanks guys for your replies, sorry if my question is confusing, but I couldn't think of any other way of describing it without the use of a screen dump to show you.
At the moment I haven't got another monitor to try, even though this looks as though it would have been the easiest option. I shall start asking round to see if I can borrow one to eliminate that variable.
However I will try to reinstall and to update "Graphic Drivers" to get rid out of this display problem.
Thanks to all.

Qosmio G20 - Missing software discs

I have a Qosmio G20 that has had the hard drives wiped due to a virus.
To reinstall software a disc is required that I seem to have misplaced. Apparently Toshiba no longer keeps a copy of this disc as it is an old model. I was wondering if anyone could help me out with this problem? I think it is a software recoverd dvd-rom as according to the user manual this is the only software disc that came with the computer.
Thanks

Hi
Do you mean a software disk where you can find additional software or the disk with the OS?
Normally for this older notebook you can get a recovery disk from an authorized service provider. It takes only few minutes to ask for this.
Furthermore on the Toshiba website you can search for the nearest authorized service provider.

Qosmio F10: ERROR: "Unable to ACPI Name Space!"

The original motherboard with 855PM chipset was exchanged at Toshiba German service during the warranty period for the new one with another chipset (915 or 910).
The Toshiba "Common modules" were successfully running with the new motherboard until there was some trouble with Windows XP and I had to reinstall it. After that I try to install "Common Modules" Toshiba V.6.02.00" on my Qosmio F10 with XP Proffesional and SP2.
I have got a message "Unable to ACPI Name Space! GNS.exe terminated." The error appears 5 times, before laptop show me Next button and when i push "This is not and ACPI System" It's not possible to install ACPI device of toshiba" error appears and close the "Common Modules Toshiba V.6.02.00" application.
In addition when trying to shutdown Windows XP, the "Standby" button is deactivated and computer is not able to shut down automatically but requires to press "Power" button at the end.
Any ideas if it might be some kind of software or BIOS problem? Motherboard failure?
Please, help.

Hi
Thanks for the hint. Actually, I have got the driver CD from the service and used it.
Now I found the solution. The reason for the ACPI failure was that I integrated the new XP updates and the drivers from the CD into my installation package.
This installation did not work. However, after I reinstalled XP from the older installation package from summer 2006, the ACPI is running again. Thus, the correct procedure is, at first, to install the XP, then to install the drivers, and then, to install the XP updates.
Best regards,
Filipp

No audio in my Qosmio f10-101 notebook

Hello,
My qosmio f10-101 was working properly but for some reasons I used the product recovery DVD-ROM, after I've got finished with the recovery DVD i restarted the system and unfortunately this blue screen kept showing on the screen and the system kept rebooting automatically.
Anyhow I decided to install a windows xp professional original version that I had before and it was perfectly installed except for ONE problem
I found that there is no audio in the pc, i tried each and every way to fix the problem, i've used the "tools and utilities" cd-rom and all divers were installed except for the audio driver, i keep getting this message "microsoft bus driver should be installed before installing the audio driver", so i downloaded the bus driver but still I cant install the audio driver
I've been trying to fix this problem for 6 months now but I failed to
any reply would be very appreciated
thank you

Qosmio F10-101
Probably you installed in the wrong order. You should install the chipset software followed by the display driver prior to any other driver. Also, install the Common Modules before any other Toshiba utility.
Get the Toshiba drivers and utilities for that model here.
I have attached the suggested order of installation.
-Jerry
Attachments:
install xp.txt ‏2 KB

Qosmio F10 does not boot up system missing or corrupt

I've got a Qosmio F10, and I use all the right procedures for PROUDCT RECOVERY DVD-ROM.
I have done all the updates drives necessary as well , but when I switch on the laptop came with a message error:" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
Windows could not start because the following file is missing or corrupt:"
So, now my computer start with boot options, but whatever you choose the system boot again and again...
What to do??? Please.

Hmmm usually after the usage of the Toshiba recovery CD everything should run ok.
I read on some computer expert websites that this issue could be related to the hardware fault. Maybe the HDD or the memory module is corrupt.
I would firstly recommend formatting the whole HDD (delete also all partitions).
Then install the OS again.
If it will not solve this issue you could check if its possible to install XP from the original Microsoft CD.
Additional you could check the memory modules. Try to remove one and use only one or replace it with a new one.
But please note that these are only my suggestions and Im not 100% sure if these proposals will solve you problems. Anyway its worth a try

Qosmio F10-103, Unmountable_ boot_ volume.......what can I do??

Hi,
I have a Qosmio F10-103.
One day ago the blue page with
the writing ''Unmountable_ boot_ volume''
appeared!
What can I do?
I red on some forums that it (could) be
a problem of the Hard disk and that
I could repair the cpu using the
windows xp boot cd , copying the files
boot.ini , NTDETECT.com , NTLDR ...but.....
Toshiba gave me only the DVD-rom backup,
not xp boot.
Then I tried to use that DVD end I entered
into the Toshiba Recover Utility 1.0.1.0
and I had a disk checking.....the result was:
''Application error 29004
Read sector failure, result =1, drive=128, sectors
132479 to 132481 if the problem persists contact toshiba....''
Here I am!
It's useful to say that all the modes of booting
windows doesn't work.
Also, the ''look-like dos prompt'' that appears
once exit from the recover utility doesn't permit
to copy the file I need from the DVD.
What can I do???
Is there something to do before......the formatting
procedure??
Thanks a lot!!!!!

Hi,
it seems that your Qosmio has a corrupted windows. Like you wrote you can copy the missing or corrupted files from another media. It's right, the Toshiba recovery CD/DVD contains only an image and is a OEM version!
But you can copy these files also from another PC or Notebook. Then take a boot diskette and boot the Notebook. Then copy the files in DOS mode and try to reboot. Then it should work again!
Bye and Good Luck
Rudi

F10 - create video DVD from recorded TV programme

When I try to create a DVD from a recorded TV programme on my Qosmio F10 I get the following message-
"Media in the CD/DVD drive is not writable by Media Center"
I know that the media is writable by the Qosmio under normal windows but under Media Center it doesn't work on any format of DVD - data, video or DVD slide show.
Any ideas?
Tia,
Les

Hi
I found information that the driver upgrade can solve the problem.
Furthermore you can check this links. There useful und interesting news about Media Center.
http://www.fstop-blues.com/2005/04/windows-media-center-tip-burn-dvr-ms.html
http://www.microsoft.com/windowsxp/mediacenter/using/DVD/burntvtodvd.mspx
Bye

Qosmio F10 - USB devices not being recognised properly

Hi there,
I've been having major problems with the USB ports of my Qosmio F10. When ever I try to plug in a USB device, the F10 recognises there is something there, but always categorises it as an unknown device. For example, everytime I try to attach a USB mouse, it does not instantly recognise it, even after previously having gone into the device manager and manually installing a driver.
This has been the case since I bought the laptop 5 months ago, but I cant ignore it any longer.
I have already tried :
- uninstalling all USB controller and hub drivers and reinstalling
- making sure that power save for the usb devices was not ticked
-ticking "install software anyway" in the driver signing options
When I open up device manager my USB looks like this
- Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24CD
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C2
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C4
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C7
-USB Root Hub
-USB Root Hub
-USB Root Hub
-USB Root Hub
Any help on this is much appreciated as its driving me nuts :-)

Hi
I agree with Jack. You have suggested that the USB devices were recognized but as an unknown device. In this case the device drivers are needed.
Which USB devices did you connect?
Sometimes some USB devices cannot be recognised properly because of the low power of the USB ports. If the USB device needs more power than 500mA standard power the OS could has some problems with the recognition.
In this case you need a external power supply or a USB hub with the power supply.

Need Windvd 5 for my Qosmio F10

Hello,
I have a Qosmio F10..a Japanese one...I live in Turkey and formatted my f10 ..Now it is English but I do not have programs such as Windvd and dvr ...and I cannot watch TV in windows XP...please someone help me ..I need windvr 5 for Toshiba (English)...
Thanks

Hello
WinDVD and WinDVD Creator applications are a part of the recovery image and it can not be downloaded or installed separately.
You can also use other applications for watching DVDs like PowerDVD or something similar. I presume that your Windows option is not MCE and in this way you need some other application for watching TV. I am not familiar with TV tuner built in Japanese units but I have heard that Japanese units have TV tuner that can be used in whole world.
If you have solution for this issue please let us know.
Good luck!

Qosmio F10 additional software DVD broken

Similar Messages

Maybe you are looking for