Qosmio F10 grafic card GForce 5700 128Mb was replaced on GForce 6600 128Mb

Does anybody has the same problem for Toshiba Qosmio F10 after video card replaced
Lines on the screen or computer does not start properly only fan is running but not logo Windows on the screen appears

Hi
This sounds not really good I dont know what the service guys done
Either the have forgotten to connect something or there is a malfunction.
I think you should contact the guys again to clear this silly situation.
I have already replied to your other post. There you should find the link to the ASP database.

Similar Messages

Grafic card GForce 5700 out of order for Qosmio F10

Grafic card GForce 5700 128Mb out of order two times.
Does anybody now why it happen for Toshiba Qosmio F10 model
How to connect to Service provider in Ukrain

Hi
Its always possible that some parts are not available at this moment. Its nothing unusual.
In my opinion if the service provider has not parts on stock in the Ukraine the parts must be ordered form the Toshiba head quarter or somewhere else.
I can remember someone in this forum has suggested that a graphic card was out of order and the notebook was upgraded with another better graphic card.
you can contact the ASP in your country. The contact data you will find on the Toshiba page:
http://eu.computers.toshiba-europe.com/ --> Support and downloads --> support page --> Find an Authorized Service

Qosmio F10: nVidia GF Go 5700 - driver update not successful

I've a problem:
I'm not able to update the driver of the nvidia from the 6.14.10.6612 (that are from 2004!!)
I tryed on nvidia home page, but none of the driver works with my notebook.. (I read that this is not recommended on others post, but It was my only chanche !)
I also tryed to download from toshiba the F30 nvidia drivers... without success!!
I need to update this driver because when I try to install direct x9.c windows MCE give me an error, an it's due to the driver 6.14.10.6612 that have not WHQL certificate...
please give me an answer...
I need to install it as soon as possible!!

I followed all the instruction on laptopvideo2go...
I tried a lot of driver, in the end I found (helped through their forum) a good driver I was able to install it on my toshiba laptop...
What's the problem?
That driver (the only I could use form my Toshiba Qosmio F10 with GF 5700) is not windows certificate (WHQL)...
Now I resolved my software application problem with a trick, I modified the .cfg installation file in the way that the application does not ask for DirectX 9.c during installation process...
So now the SoftWare seem works correctly...
By the way, I was not, and I'm not able to install DirectX9.c on my laptop yet!
And the next Software I'll need, what will happen if it requires DirectX9.c ...?!?(should I have to loose 5 working days to install it?)
Thanks all for the attemps to help me!

Qosmio G10-106: No warranty but motherboard was replaced free of charge

Hey there.
I have my toshiba QOSMIO G10 since 2005 and this year my graphic just went bad for any reason, my bad was I had my warranty already expired, so I called Toshiba to inform myself about the price of the mainboard as the graphic card is integrated with it.
It was absurd with VAT will cost me £630.00, I fell frustrated and I resolved to call Toshiba to make a complaining as a did. They returned my call telling me
They will change my mainboard FREE OF CHARGE and they did it in "48 hours" unbeliveble.
It was amazing and grateful. So if someone is having the same problem as i had just call them.
PS. this is my second Toshiba computer i can tell you after that i will love toshiba forever and i fell so happy and proud to have had purchased my computer from a respectable company as Toshiba.

I saw you have already posted you issue here in this thread:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=21291
Hey Marcelo thanks for sharing this info with us! I think the Toshiba support is really NOT bad and you message confirms this fact!
Thanks for feedback

TV Tuner Qosmio F10-125

I have just taken delivery of an F10. Excitedly I connected the jack at the back of the PC to the ordinary Arial and searched for the signal by auto scanning using the media wizard. No signal was detected. I tried using the RF analogue signal from my Sky digi-box that must be a good a signal as one can get. Still nothing. In both cases the co-axial cable was carrying a healthy signal as evidenced by the TV happily playing all the channels on the cable from both sources
Any one know what to do? or is this wonder Qosmio F10 a joke!!
Message was edited by: Ronaldat

Hi,
I don't have the PC in front of me ... it's my son's and presently several hundred miles away, so I'll have to do this by memory (which at my age isn't too reliable, so I apologise in advance if I mislead anyone.
>> By MCE do you mean media centre?
Yes - acronymn for Media Centre Edition (which takes far too long to type).
>> How does one use the QosmioPlayer tuner? I don't understand F2/setup??? I've tried pressing F1 then F2 but nothing happens.
With the G10 (and I don't know about the F10) you can start up Qosmio player without booting the PC (by pressing the TV button at the back of the keyboard area). Initially (i.e. without setting up the tuner) I got pretty much a blank screen. Pressing F1 brings up a window with a set of options in two rows - one of which is F2 - Setup. After pressing F2 it didn't take much effort to find an option to do an AutoScan which worked very easily and in about 2 or 3 minutes, I think.
Once this ran through I found that valid signals were distributed fairly randomly through the 1-63 possible channels - I can't remember the numbers exactly but BBC1 was at channel53, Channel 4 at 27 and so on.
You can tinker with the settings such that when you select Channel 1 on the main TV player, this actually shows Channel53 (or whatever) so you can configure it for (say) channels 1- 5 to reflect the more obvious setup.
Having got this under control (more or less), I then went back to try Media Centre - configured the TV Tuner to PAL/Secam manually and could then find regular BBC, ITV etc ... again scattered at random channel numbers across the tuner. I've no idea how to rationalise these .. and I think someone else has asked this question on the Forum.
I used a decent rooftop aerial to plug into the Toshiba ... the pictures for ITV1, Channels4 and 5 are perfect, BBC1 and 2 are poor. Not sure why this should be so since they're OK on my regular TV - maybe someone wants us to watch the adverts!
That's about as much as I know, I'm afraid.
>>Still waiting for a phone call after 3 days.
You have my sympathies ...
FrankW

Fan noise after graphic card changed - Qosmio F10-101

Two months ago i have had my graphic card changed from nvidia fx 5700 to nvidia geforce go 6600.
from my laptop toshiba qosmio f10-101. After changing the old graphic card there is a fan noise that starts and stops every 2 minutes , that it drives me crazy every time i'm hear it.
Can somebody tell me if this noise is natural and if he/she knows if the specific card is noisy in every laptop? or If there are any ways to disappear this noise or increase in the maximum speed the noise.??
Message was edited by: marlena

Hello Marlena
On Qosmio forum you can find few similar topics with few interesting comments. On of http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10944&messageID=42103
Bye

Need new motherboard/graphic card for Qosmio F10

Where can I buy a motherboard and/ or graphics card for Qosmio F10?
Thanks, all.

Price, address and phone number please. Oh and an email address if there is one. I was hoping that E-bay might have a motherboard that I need, but I don't see any. I'm shopping around at the mo seeing where I could buy one.

Qosmio F10: vertical lines on screen

I am using a Qosmio F10 with a nVIDIA 128MB graphics card. Recently while i was running a graphics based application, my display started showing me wired colours on the screen. I was able to start the game once more but found the same problem to exist.
On restarting, the system was showing vertical white lines on the qosmio startup display, '*' on the bios password screen and green lines on the Windows XP loading screen. I was not able to start-up Windows. Thinking that it would be a S/W problem, I formatted it.
The problem still persists, and I still cannot load Windows XP.
Can anyone tell me what is wrong with my Laptop???

Hi
This sound like a hardware malfunction and I suppose it could be something wrong with the graphic card or motherboard :(
But do the vertical lines appear on the external monitor? If yes, so it must be a board issue.
In such cases you have got not many possibilities. In my opinion you have to ask the service guys for the notebook check. The technicians from the service partner in your country could run some diagnostic tests and will give you more details about the malfunction.
Good luck

Distorted video-out signal on Qosmio F10

Hi,
Up until recently my video-out function on my Qosmio F10 worked just fine. When I connected my laptop to the TV the other day, using a s-video cable, the picture had turned quite distorted. The picture on the TV flickers and sometimes disappears totally.
My laptop has the Nvidia GeForce FX Go5700 graphics card and I have changed no settings what so ever from the point in time when the video-out was working properly.
To debug I've bought a new s-video cable and also a scart-adapter. Using these I've eliminated that the TV's s-video in port is the problem. It seems to me as if something is wrong with the signal from the graphics card.
I'd be very grateful for a diagnose on this issue.
Thanks and regards,
Johan

Hi,
I've made sure that I use the latest drivers (although the ones that Toshiba provides are not exactly brand new!). I've also made sure that I use the correct TV-format (PAL-B in my case). Furthermore, I've tried both using the s-video port on the TV directly and also using a scart adapter... The result is still the same...
I'm inclined to believe that there is something wrong with the hardware (e.g. a loose contact in the s-video out port). In that case i guess this might be a warranty issue...
Rgds,
Johan

Qosmio F10 with replaced mainboard: Where can I find the right drivers?

Hello guys,
Toshiba service replaced the board with a new one including a geforce 6600 gpu on my F10. So, now I formated the laptop and I want to put again back everything to work. But I see now that there are some different devices, like the 6600go gpu.
Where can i find the drivers (lan, chipset, modem..etc.) On the toshiba web site? If i choose qosmio F10 downloads, I get the drivers for the old motherboard (and graphics card 5700).
Anyone knows where to get the right drivers? thanks!

Hello
Check please THIS page.
I presume that chipset driver and also LAN driver are the same.

Qosmio F10-103, Unmountable_ boot_ volume.......what can I do??

Hi,
I have a Qosmio F10-103.
One day ago the blue page with
the writing ''Unmountable_ boot_ volume''
appeared!
What can I do?
I red on some forums that it (could) be
a problem of the Hard disk and that
I could repair the cpu using the
windows xp boot cd , copying the files
boot.ini , NTDETECT.com , NTLDR ...but.....
Toshiba gave me only the DVD-rom backup,
not xp boot.
Then I tried to use that DVD end I entered
into the Toshiba Recover Utility 1.0.1.0
and I had a disk checking.....the result was:
''Application error 29004
Read sector failure, result =1, drive=128, sectors
132479 to 132481 if the problem persists contact toshiba....''
Here I am!
It's useful to say that all the modes of booting
windows doesn't work.
Also, the ''look-like dos prompt'' that appears
once exit from the recover utility doesn't permit
to copy the file I need from the DVD.
What can I do???
Is there something to do before......the formatting
procedure??
Thanks a lot!!!!!

Hi,
it seems that your Qosmio has a corrupted windows. Like you wrote you can copy the missing or corrupted files from another media. It's right, the Toshiba recovery CD/DVD contains only an image and is a OEM version!
But you can copy these files also from another PC or Notebook. Then take a boot diskette and boot the Notebook. Then copy the files in DOS mode and try to reboot. Then it should work again!
Bye and Good Luck
Rudi

Qosmio F10: Monitor screen looks like an Andy Warhol picture

I am currently having problems with my monitor screen looking like an Andy Warhol picture. I have resorted to going through the Product Recovery DVD-ROM for my Qosmio F10/G10 Laptop in the hope that reverting it back to the factory settings would solve the problem but it hasn't.
The screen breaks down after the Windows welcome screen, leaving me with my desktop all Andy Warhol like (i.e. blocks of pixilated colour at the edges of the graphics). I have tried to reset the resolution which solves the problem to an almost acceptable level but on a temporary basis, because the problem re-appears again when I re-boot the laptop.
I think that it is something to do with the Windows Multimedia Operating system that was preinstalled on my computer (so no recovery disc). The reasoning behind this assumption is that I put a DVD film into the Multimedia that is part of Windows XP and the film is a moving Andy Warhol video.
I put the same DVD into the WinDVD that came as a Toshiba additional content and the DVD is perfect! My reasoning is, that if there was something wrong with the hardware of the Laptop, then all DVD reading programs would react the same way, but as they do not, it must be a programming (or operating system problem).
Am I on the right lines? Is there a way to solve the problem via a downloadable file?

Thanks guys for your replies, sorry if my question is confusing, but I couldn't think of any other way of describing it without the use of a screen dump to show you.
At the moment I haven't got another monitor to try, even though this looks as though it would have been the easiest option. I shall start asking round to see if I can borrow one to eliminate that variable.
However I will try to reinstall and to update "Graphic Drivers" to get rid out of this display problem.
Thanks to all.

Qosmio F10-136 display drivers/video controller

I am in the middle of resintalling everything on my Qosmio F10-136 laptop. I have used the display drivers from the Toshiba website. However, in the device manager the video controller is showing an error and the drivers are not installed. The graphics card is a nVidia GeForce FX go5700. Scrolling pages up and down in IE is very slow.
Also when I go to display properties settings-advanced-adapter the graphics card is not shown under adapter type.
Anyone know what the problem is? Do I need to download drivers from somewhere esle?
Thanks,
Ben

Hi
The graphic driver released on the Toshiba European driver page is working and can be installed properly.
I think you did something wrong.
Try to reinstall the graphic driver again.
Remove the graphic controller from the device manager list and reboot the notebook.
Then try to reinstall the driver again. I would recommend installing it in device manger.
Choose graphic card, update the driver, then point to the downloaded graphic driver and finish the installation.
Cheers

Qosmio F10 - USB devices not being recognised properly

Hi there,
I've been having major problems with the USB ports of my Qosmio F10. When ever I try to plug in a USB device, the F10 recognises there is something there, but always categorises it as an unknown device. For example, everytime I try to attach a USB mouse, it does not instantly recognise it, even after previously having gone into the device manager and manually installing a driver.
This has been the case since I bought the laptop 5 months ago, but I cant ignore it any longer.
I have already tried :
- uninstalling all USB controller and hub drivers and reinstalling
- making sure that power save for the usb devices was not ticked
-ticking "install software anyway" in the driver signing options
When I open up device manager my USB looks like this
- Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller - 24CD
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C2
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C4
- Intel (R) 82801DB/DBM USB Universal Serial Host Controller - 24C7
-USB Root Hub
-USB Root Hub
-USB Root Hub
-USB Root Hub
Any help on this is much appreciated as its driving me nuts :-)

Hi
I agree with Jack. You have suggested that the USB devices were recognized but as an unknown device. In this case the device drivers are needed.
Which USB devices did you connect?
Sometimes some USB devices cannot be recognised properly because of the low power of the USB ports. If the USB device needs more power than 500mA standard power the OS could has some problems with the recognition.
In this case you need a external power supply or a USB hub with the power supply.

Qosmio F10: ERROR: "Unable to ACPI Name Space!"

The original motherboard with 855PM chipset was exchanged at Toshiba German service during the warranty period for the new one with another chipset (915 or 910).
The Toshiba "Common modules" were successfully running with the new motherboard until there was some trouble with Windows XP and I had to reinstall it. After that I try to install "Common Modules" Toshiba V.6.02.00" on my Qosmio F10 with XP Proffesional and SP2.
I have got a message "Unable to ACPI Name Space! GNS.exe terminated." The error appears 5 times, before laptop show me Next button and when i push "This is not and ACPI System" It's not possible to install ACPI device of toshiba" error appears and close the "Common Modules Toshiba V.6.02.00" application.
In addition when trying to shutdown Windows XP, the "Standby" button is deactivated and computer is not able to shut down automatically but requires to press "Power" button at the end.
Any ideas if it might be some kind of software or BIOS problem? Motherboard failure?
Please, help.

Hi
Thanks for the hint. Actually, I have got the driver CD from the service and used it.
Now I found the solution. The reason for the ACPI failure was that I integrated the new XP updates and the drivers from the CD into my installation package.
This installation did not work. However, after I reinstalled XP from the older installation package from summer 2006, the ACPI is running again. Thus, the correct procedure is, at first, to install the XP, then to install the drivers, and then, to install the XP updates.
Best regards,
Filipp

Qosmio F10 grafic card GForce 5700 128Mb was replaced on GForce 6600 128Mb

Similar Messages

Maybe you are looking for