Qosmio F10 - How to reset the BIOS?

i have Toshiba Qosmio F10, I forget password.
Please help me by reset the BIOS.

You cannot reset BIOS on your own and it must be done by authorized personal only.
BIOS password is very important security feature and you cannot expect that BIOS password deletion procedure will be described in public forum.
Contact nearest Toshiba service and they will do this for you.

Similar Messages

Satellite x200 - how to reset the Bios password

Hello,
I purchased a used Satellite x200 to replace my old p100.
When I received it, I remarked the bios is locked and the person I got it from is unable to tell me the password, arguing she used the finger imprint only four long.
Is there a way to reset the bios password and how much would it cost?
Regards

Hi
The BIOS password can be removed only by an authorized service provider in country where you live.
So get in contact with Toshiba service partner and ask for BIOS password reset.

Qosmio F30-112 - How to reset the BIOS password

Hello
I get broken laptop Qosmio F30 -112 with broken lcd.
Now I get new lcd monitor and fix it but I can not access to bios password.
I found out how to recover passwords for other tips of toshiba laptops but I can not find for this.
What I looking is name of "jumper" that will reset my bios password.
I was carrying a laptop in a local service but they did not know to remove the problem.
Please help !!!
Best regards,
Antonio

Hello
Please visit http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ and there you will find authorized service providers for your country. Make a call and check what can be done about that.

How to reset the BIOS Password ?

Hi there, My uncle just gave me an HP Mini 110 for I can write my lessons on it more easily than on my 17" gaming laptop which is pretty heavy and not really carriable. So the first time I turned on the notebook, it asked me the BIOS Password. At this time my uncle does not remember he set a BIOS Password and we tried multiple passwords but none of them worked. I don't know if it can help but I have this Error Code when I type a wrong password three times in a row : CNU9393LKW I just noticed that this code error is the same as the notebook's serial number. I hope someone will be able to help me. Have a good evening,

Please try this Password = e9lofofksd Steps to be followed:1. Use the unlock code posted above to enter the BIOS2. Disable all passwords that are enabled3. If asked for current password - type the unlock code4. For new password, just press ENTER key5. Repeat the same for verify password column.6. Then leave the BIOS by saving & exit option to save the changes. Troubleshooting:Incase if the Password doesn’t work please try a Hard Reset as follows.1. Shut down the notebook2. Unplug the AC Adapter and then remove the battery3. Hold down the Power button for 30 seconds4. Plug in the Power/AC Adapter (Leave the battery out for the moment) & Start the Notebook5. If you now see a password box, Please type the same password I shared before & press enter Hope this helps, for any further queries reply to the post and feel free to join us again **Click the White Thumbs Up Button on the right to say Thanks**Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. Thank You,K N R KAlthough I am an HP employee, I am speaking for myself and not for HP

How to reset the BIOS to solve a problem with DVD burner on Satellite P100

Hi
I am trying to reset my cmos to solve a problem with my dvd burner.
I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completly inoperable.
After much searching I have heard to reset cmos.
I have treid through debug and nothing happend. I don't really want to open up the laptop and pull the cmos battery out or leave it for a month until the cmos battery runs out.
Is there any advice on what I should do.

Hi
What you want to do is simply not possible you said that you had some problems with PCs and you fixed it.
That's great. But a PC is simply different and cannot be compared with the notebook
> I was trying to run an old game that I own that was protected by starforce and ran starforce nightmare with has made the device completely inoperable.
According to your statement above you CD/DVD drive issue could be related to the installed starforce nightmare. I dont know this but I presume this software/application has changed or destroyed the CD/DVD drives firmware.
Sorry but I see only one way to get it working again You have to contact the ASP in your country. Maybe a technician would be able to rescue the drive
PS: your Satellite P100 PSPA6A series seems to be a Australian series therefore you should use the Toshiba Australian page if you need some drivers or BIOS
Bye

I was rubbing my keys and screwed up my font setting. i don't know how to reset the font to original mozilla setting

i was rubbing my laptop keys. i must have hit the right key sequence to change the font setting. i don't know how to reset the font. i was in mozilla at the time, so only it was affected. IE still uses the correct webpage fonts. IE has a reset on their browser, does firefox?

Have you tried closing Firefox and visiting the site again without restoring your session? This will bypass any temporary changes.
If the problem is the font size, you can reset the zoom level:
View menu > Zoom > Reset
If you have the orange Firefox button, tap the Alt key or press F10 to display the classic menu bar where you will find the View menu.
If that doesn't help, can you describe what's different in more detail?

Reset the BIOS password in TS

Wanna ask, is it possible if I want to reset the BIOS password for my machine when running my wipe and load TS?

No, it's part of the System Software Manager. See for a link and a how-to:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c03161127-2%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=4145435&ac.admitted=1402998157928.876444892.492883150
My Blog: http://www.petervanderwoude.nl/
Follow me on twitter: pvanderwoude

How to remove the BIOS password on Satellite M40

I'm looking for the the master Bios password or how can I reset the Bios password of Satellite M-40.
I forget my Bios password and I can't used my laptop any more.
Please I need the help

I've got bad news for you... :( the BIOS password cannot be removed easily.
As far as I know only the ASP (Toshiba authorized service provider) can remove the unknown BIOS password...
Therefore I don't see any other solution as to contact the local ASP and to ask for the password removing.
Bye & good luck

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

The HP C4480 all in one series PRINTER that I got free with my i-Mac is printing TINY print despite that my computer is set at 13 font Helvetica. How to reset the printer to normal print?

Is the Paper Size: set to US Letter and Scale: set to 100%
Dennis

Does anyone know how to reset the fan on a MacBook Pro 13-inch (Late 2011) to it's factory setting speed (Maybe Terminal may help?)

I have a late-2011 13-inch MacBook Pro running OS X Yosemite. (Standard configuration).
My problem is that I downloaded a fan control application and it worked perfectly, but it started to get annoying so I deleted it.
Does anyone know how to reset the fan speed back to factory settings (Maybe a command in terminal?)

Hello damo1177,
It should help to reset your system's SMC and NVRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
About NVRAM and PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

How to reset the password in macbook Pro? This is not related to apple id

Hi,
I gave my macbook pro for service. Initially there was no password set up in the system. However the service guys have put some password to install the applications. (This is not related to apple id and apple store apps). Can you please help how to reset the password?
Regards,
Arjun K M

Welcome to Apple Support Communities
As you have OS X Mountain Lion, try resetting the password from Recovery > http://discussions.apple.com/docs/DOC-4101
It looks like OS X was reinstalled. After resetting the password, you will be able to log in and use your MacBook Pro

How to reset the iPad - the Location Services doesn't seem to work?

How to reset the iPad - the Location Services doesn't seem to work?
I can not get NFL Game Pass or Siri to work???

Well you can plug it into itunes and under summary tab hit RESTORE. This should fix any software issues that you may be experiencing. About gamepass, I dont know, I dont have it. Siri is not on the IPAD2. Only on the 3rd generation Ipad, so you wont have it(going by ipad2 under your name).

How to Reset the EIM \ CIM System "sa" Password Procedure

All.
I have posted a document, "How to Reset the EIM \ CIM System "sa" Password Procedure" on this CSC site to assist you w\ the EIM "sa"user password reset procedure.
I am also posting the procedure and word document attachment here.
Let me know how helpful the procedure is.
Bernard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman";
mso-ansi-language:#0400;
mso-fareast-language:#0400;
mso-bidi-language:#0400;}
Resetting The CIM \ EIM System “sa” Password Procedure
Key: ‘ ‘ = Two single quotes.
The following contain the query for blanking out the SA password for Partition 0 thru the backend.
1. Go to SQL Server Management Studio and change the database to master database. USE “eGMasterDB”
2. a. To verify user_name, and select user_id“save the results for backup.
b. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
Note: Be sure to save query and results, so that it can be provided for troubleshooting, if there is a problem.
3. a. For Blanking out the SA password. UPDATE egpl_user WITH (ROWLOCK) SET password = ‘ ‘, case_insensitive_password = ‘ ‘ WHERE user_id = 1
4. Verify the PW columns are now clear, by re-running the select cmd. “SELECT user_id, user_name, password, case_insensitive_password FROM egpl_user WHERE user_id = 1”.
Then to successfully access and change CIM \ EIM “sa” User Account. (Partition 0)
4. Go to login. //<EIM server ip address>/system/
5. Login with “sa” as the user name, no password.
6. Navigate to Administration > Partition: System > Users, and highlight sa user under “List: Users”.
7. Highlight the “Password” row, on the “General” tab, under “Properties: sa”.
8. Select the box to the right of row and it will ask if you want to change the password.
9. Select yes, enter new password.
10. Save.

It's great to have these types of procedures published on CSC! Thanks, Bernard!
-Paulo

How to reset the response status and response header

Dear Masters
Actually we are using NTLM Authentication process to get the system login id for our web application. The problem which I am getting is after running the NTLM Authentication Code I am not able to call the action class. It is telling 400 Server error bad request. I am using Struts Dispatch Action Class. In Dispatch Action I will be passing a name (eg. method) as a parameter in struts-config.xml file and using that parameter I will be calling the respective method in the Action class. The problem which I am facing is after running the authentication code I am not able to fire the action class. It is telling the error in the console as "parameter named method is not found". Actually in NTLM Authentication code they are setiing the response status to www-authenticate,NTLM. If I reset the response status back to the normal form I think i will be able to fire the action class. Please give me a suggestion on how to reset the response status and response header back to the normal form. Any solution to this is appreciated. Please respond your reply as soon as possible. Thanks in advance.
Regards
Ramesh

Hi,
I think, a servlet filter is what you need. Please check the following URLs on how to go about creating a filter.
http://dev2dev.bea.com/pub/a/2005/05/decorators.html
http://www.onjava.com/pub/a/onjava/2003/11/19/filters.html
http://www.onjava.com/pub/a/onjava/2004/03/03/filters.html?page=1
Cheers,
vidyut

How to reset the military usage value in GTS Business partner

Hello Experts,
Does anyone know how to reset the Military usage value='2' to blank on the Business partner within GTS?
I tried putting a blank there, clicking on the accept entries button followed by saving the Business partner.
It does not seem to work this way.
Does anyone know if it's SAP bug for not having blank as one of the allowable values for the usage except when it's that way while newly created?
The GTS implementation details are as follows:
Any help with regard to this will be much appreciated......
Thanks,
Prashant.

Prashant,
As I already informed you, it is not possible to re-set the indicator to <blank>.
From the program code, I can see that the usage indicator is only transferred from the feeder system during the creation of a customer partner. The value in GTS is set either to '1' or '2' during creation, and cannot be changed by any subsequent data transfer from the feeder system.
I think that logic is related to the fact that usage records may be created for multiple Legal Regulations, and those records may then be changed individually by the user in GTS. On that basis, it would not be reasonable to over-write the values by re-transferring the customer from the feeder system.
Regards,
Dave

Qosmio F10 - How to reset the BIOS?

Similar Messages

Maybe you are looking for