Qosmio F10: nVidia GF Go 5700 - driver update not successful

I've a problem:
I'm not able to update the driver of the nvidia from the 6.14.10.6612 (that are from 2004!!)
I tryed on nvidia home page, but none of the driver works with my notebook.. (I read that this is not recommended on others post, but It was my only chanche !)
I also tryed to download from toshiba the F30 nvidia drivers... without success!!
I need to update this driver because when I try to install direct x9.c windows MCE give me an error, an it's due to the driver 6.14.10.6612 that have not WHQL certificate...
please give me an answer...
I need to install it as soon as possible!!

I followed all the instruction on laptopvideo2go...
I tried a lot of driver, in the end I found (helped through their forum) a good driver I was able to install it on my toshiba laptop...
What's the problem?
That driver (the only I could use form my Toshiba Qosmio F10 with GF 5700) is not windows certificate (WHQL)...
Now I resolved my software application problem with a trick, I modified the .cfg installation file in the way that the application does not ask for DirectX 9.c during installation process...
So now the SoftWare seem works correctly...
By the way, I was not, and I'm not able to install DirectX9.c on my laptop yet!
And the next Software I'll need, what will happen if it requires DirectX9.c ...?!?(should I have to loose 5 working days to install it?)
Thanks all for the attemps to help me!

Similar Messages

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

When I plug in my iPhone to a USB port on the back of my computer I get the error "MTP USB Device driver was not successfully installed" and of course there is no device that shows up either. It would be great to download my photos! I'm using Windows

Go through this support doc:
OS: Device not recognised in iTunes
Windows: http://support.apple.com/kb/TS1538

HT1600 Why do I get update not successful every time I attempt to update?

Every time I try to update my apple tv, i get the error message at the end that says Update not successful, try again...
I am using it on a cable off my router and works perfectly. IE streams Netflix just fine etc.

Welcome to the Apple Community.
If you are using Ethernet, try with wifi.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    1.    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    2.    Connect the micro USB cable to the Apple TV and to your computer.
    3.    Reconnect the power cable (only for Apple TV 3)
    4.    Open iTunes.
    5.    Select your Apple TV in the Devices list, and then click Restore.

HT1600 Apple TV update not successful

I'm trying to update my Apple TV (3rd generation) to 5.11. It keeps getting right near the end of the install, hangs for a couple of minutes, and says "update not successful". I restart the Apple TV like it asks ans get the same results. I've also rest settings and attempted a restore but nothing is working.

Vladman,
As far as I know the update breaks the ATV. Doing restore from iTunes will make it revert to the old firmware. You will have to rebuild it - wifi and what not. I have not tried it again - waiting for the NEXT update before I try again. This is the only method I have seen which works.
Winston and the FeverDog posted these steps.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV.
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Source list, and then click Restore.
Download the below file. Get to the point of restore Apple TV and hold the option key down when you click on the Restore button.
Browse to the downloaded file and restore.
Apple TV 2:
http://appldnld.apple.com/AppleTV/041-4362.20120605.t8i4U/AppleTV2,1_5.0.2_9B830 _Restore.ipsw
Apple TV 3:
http://appldnld.apple.com/AppleTV/041-4361.20120605.grjot/AppleTV3,1_5.0.2_9B830 _Restore.ipsw

NVIDIA GeForce 8600M GT driver update?

How is this done? I can update it in my Boot Camp installation running WinXP but how do I update it under MacOS X? Is it included in the regular OS updates or do I have to do something else? I noticed the other day that there's an update for the 8- series ( which would be what I have if I'm not totally mistaken ) among others.

I don't believe there are any driver updates for OS X.

Qosmio F10 grafic card GForce 5700 128Mb was replaced on GForce 6600 128Mb

Does anybody has the same problem for Toshiba Qosmio F10 after video card replaced
Lines on the screen or computer does not start properly only fan is running but not logo Windows on the screen appears

Hi
This sounds not really good I dont know what the service guys done
Either the have forgotten to connect something or there is a malfunction.
I think you should contact the guys again to clear this silly situation.
I have already replied to your other post. There you should find the link to the ASP database.

HT1551 Apple tv 2 ios 6 update not successfully 5 times, how get fix

First time IOS 5 well done for Apple TV2 work ok but poor and not work update Software IOS 6 and not successfully 6 time month. It is not work the You Tube and
About Activation Failed why ? How did you fix to let me know please. Thank you, John Metcalfe.

I have so many times to restart and reset my Apple TV.

Qosmio F10: What to do with the Update Tool CD after motherboard replacement?

Hi, Hoping someone can help.
My F10 has had three new mother boards since the first one broke down. Fortunately I had paid for the extended warranty. However, when it came back this time they had formatted my hard drive because they changed the chip set. Now it can't find a TV signal and the FN Keys dont work. They sent me new CD Roms entitled "Update Tool" and "Qosmio Player Update", but they don't do anything to help the problem. Anybody got any ideas or does it need to got back again?
Thanks in advance
Chris

Ok, I think the engineer will install everything again and will make an update.
By the way; I think the bundled Qosmio Update Tool CD is a booting CD and its necessary to boot up from this CD to install the proper system drivers for the new hardware components.
The complete update process will take about ten minutes. Follow the on-screen
instructions.
After approximately 5 minutes, the copy process is complete. The message
The media will update software, please do not remove it. Hit any key to Shutdown
is displayed. Press any key to shutdown. Turn on the power of the computer and follow the on-screen instructions.
The Update Tool CD for Qosmio screen then appears and the process of updating the software begins. This can take approximately 5 minutes and the
computer will reboot to complete.
The Qosmio Player Update only works if the Qosmio Player was installed on the HDD.
This is true for original Toshiba image installation.
Note: Do not install the Player if it's missing!
- Boot the PC with the QosmioPlayer update CD.
- Select desired language with allow key and press the Enter key.
- Select desired Country/Region Code and Keyboard Code with allow key and press the Enter key.
- Follow the on-screen instructions

Satellite P10-554 nvidia geforce fx go5600 driver update

Hi all,
I just tried to update to very last nvidia driver version 78.01. Running the setup I got an error message indicating that the setup routine couldn't find a driver that is compatible with the hardware installed. According to the doc the new update supports the harware installed.
Does someone why I can't update to most recent version?
Thanks in advance
Karl
BTW: I already uninstalled the current driver, rebooted the machine and tried to install the new version without success.

Hi Juan, hi R2D2
thanks for your answers. I found the driver on the german site as well as on the english one:
http://www.nvidia.de/object/winxp_2k_78.01_de.html
http://www.nvidia.co.uk/object/winxp_2k_78.01.html
If you follow the link "Products Supported" on this page a list of the supported products is being displayed (I just noticed that the card supported is GeForce FX 5600 and not GeForce FX Go5600). May that's the reason.
The last driver on the Toshiba site is 4.4.8.5.
Since weeks I'm trying to pinpoint a problem that the turns off due to the settings of the power management. But I can't reactivate the display when moving the mouse or pressing the keyboard. So I try to find out if it's a software or a hardware issue, but without success so far.
Best regards
Karl

SoundCard Driver update not stick

Hi I currently have a problem with my Creative Audigy SB driver. I dont know how it got messed up but I dont have an Audio Mixer Device. I can hear some sounds but some run like on quicktime and some other programs dont run. After checking a few things it led me to that driver. So of course I gave it an update and bwalah! its fixed got my Mixer Device back... or so i thought. Shortly after i had to reinstall the driver again and again and again. I managed to figure out that after a reboot or two the driver deletes itself or rverts to its old one. Any idea how to fix this ?

For starters, you might be better to post in the soundcard forum.

IPod driver update not found

Hi,
I got a brand new Nano for Christmas and cannot get it connected to iTunes. I have tried the 5 R's, read through a number of forum messages but have not found anything that works yet. The iPod is recognized when hooked up to a newer laptop, but on my computer it doesn't show up in iTunes or Windows Explorer. I've got the latest version of iTunes installed.
I've tried all 4 USB ports on the back of my computer. The Device Manager says that I have a Standard Enhanced PCI to USB Host Controller which I understand means that I have USB 2.0 ports. There is an entry for iPod under Other Devices that has a yellow question mark on it. When I look at the properties it says:
This device is not configured correctly. (Code 1)
To reinstall the drivers for this device, click Reinstall Driver.
When I try to reinstall it does not find any drivers automatically and does not find anything in C:\windows\inf. There is an entry for Apple iPod USB driver under Universal Serial Bus controllers and the properties say that it is working correctly. However, when I choose the troubleshooter, it says "This application has failed to start because bnts.dll was not found. Re-installing the application may fix this problem."
The iPod itself says "Connected Eject before disconnecting" when hooked up to the USB port.
Any help would be greatly appreciated!
- Laurie

hmmmm. okay, i think your idea about the PC not recognising what kind of ipod it is might be on the money. that can sometimes hit people if the connection to the ipod is flaky to precisely the right/wrong degree (enough to see an ipod, but not enough to recognise it correctly).
so perhaps let's keep working on the poor connection possibilities. trying a different cable was a good idea. also check to see if you can get better recognition on a USB port at the back of the PC rather than the front, or if you unplug other high-power USB 2.0 peripherals.
if you have access to another PC with iTunes 7.0.2.16 installed, try seeing if you can get better recognition for the restore on that.

Windows Vista: Device driver was not successfully installed.

This is my first post and I apologize in advance if this topic has been brought up before.
The issue is a new one for me -- I've had no problems running my iPhone on Vista until recently when it stopped showing up in my Computer window. Confused, I checked iTunes to see if it was recognized and lo and behold -- no problems there. I plugged it into my Macbook and had no issues there at all, so it's not the phone itself. I did a little Google search and exhausted what I perceive to be at the very least the basic "fixes". I uninstalled the Apple iPhone drivers from Device Manager, unplugged the USB connection after ejecting via iTunes, and then proceeded to reboot. After the boot had completed - I plugged the iPhone back in -- it was picked up and the installation of the drivers began. I had my hopes up and figured it would work, but then I got the following error message: http://img.photobucket.com/albums/v37/xthroughmyeyesx/Capture.jpg
The Apple Mobile Device USB Driver installed successfully without a hitch, the Digital Still Camera part... not so much. If anyone has possible fixes or any information behind this at all, it'd be much appreciated. Thanks already for your time.

I'm having exactly the same problem. I think there are some issues with Vista and Iphone. Please let us know if someone has a solution to this.

Iphone update not successful and restore does not work

I tried to install the latest iphone update and received a message that it was unsuccessful and I had to restore my iphone. Now, restore is unsuccessful. My phone displays an image of a cable disconnected from itunes and CD. What next? I'm dead in the water.

I had the same "unknown error 2001" every time I tried to restore the iPhone. It would detect the unit immediately in "recovery mode" but fail to restore with that error.
Then I tried this:
"+Before the iPhone is detected, but whilst connected to the computer, press on the home button and keep it pressed down until a message appears to say that a phone has been detected in recovery mode, then follow the steps indicated. It may take about 30 seconds, so don't let go."+
As suggested above (thanks, you are a savior) and it worked. I also charged the unit from the AC (not usb) for a while and restarted the PC before trying the above mentioned method. Also, I connected directly to the USB port with the cable, avoiding the "hub" thingy that comes with the phone.
Thanks! and hope that helps...

Dreamweaver CC Update Not Successful

I was notified of updates to my Adobe software this morning. All applications were updated successfully except Dreamweaver. Tried to update through website but unsuccessful. I clicked on the bar to connect to an explanation of the problem but only got a blank webpage.

1001.sheepdog do you receive any specific error messages when you try to install the update? Please see Troubleshoot install issues with log files | CC - http://helpx.adobe.com/creative-cloud/kb/troubleshoot-install-logs-cc.html for information on how to locate errors within your installation logs. You are welcome to post any specific errors you discover to this discussion.

MacBook Pro very slow to bring up homepage, won't open programs; likely related to attempt to upgrade Java software on the Parallels side, not successful because of low C drive capacity, recommended C drive compression not successful/completed.

MacBook Pro very slow to bring up homepage, programs won't open; likely related to failure to upgrade Java on Parallels, told that C disc low capacity, disc compression recommended was unsuccesful/failed. Rebooting, battery removal hasn't helped. Can't open Systems Preferences. Suggestions?

Linc, the resident dump guru, will probably be along in awhile and provide deeper insights, but here goes for now. I'm seeing an awful lot of warnings and messages from Chrome. Any chance you could lay off that browser for awhile and use Safari in the meanwhile? No red messages anywhere in the listing. Have you tried rebooting into Mountain Lion Recovery Mode to do a Repair Disk and Repair Disk Permissions? (Cause in spite of what your config tag says, the dump indicates you are running a ML kernel)

Qosmio F10: nVidia GF Go 5700 - driver update not successful

Similar Messages

Maybe you are looking for