Qosmio F10: Sometimes LCD screen is off

Hi all
I have Qosmio F10
My problem is that Sometimes the lcd screen is off which continuous 3-4 seconds.During situation,computer normally works,only lcd is not work.What do you think about?

Hello
Its strange. Does this display issue occur during especially usage or if you work with different software?
I dont have a proper answer. Did you try to update the display driver or Bios?
Well, try this, maybe it will help.
Bye

Similar Messages

LCD screen popping off Macbook Pro

I just noticed my refurbished Macbook Pro's screen in the upper middle has popped off a little bit. I pushed it back flush and ran my finger around the entire outer area of the screen to make sure no other areas pop off from the casing, but I'd like to know if anyone else has had this problem and how did they fix it? Why would this happen?
I just got this about a month ago, and I know it's refurbished, but I'm still a little disappointed that this happened. I have applecare so I'm assuming this will be covered.

Take it to a Genius Bar. Manufacturing defects are covered by both the standard 1-year warranty and the 2-years of extension covered by AppleCare.
Not knocking the Genius Bar, but ... have a good backup of your system as they will do any work required to bring it back to Apple-approved, including HD work.

Qosmio F10-124 - Pixelated screen, flicks into blank, then comes back to normal

It looks like the graphics hardware has failed on a pc bought in April 2005.
This occurred in stages, starting from around the time when I received
1) An automatic download of windows updates and
2) And Adobe upgrade.
In Sept 07. Do not know if this is at all related with the screen malfunctioning.
The screen has at best operated intermittently, with only access being possible using the external VGA port.
The latest Toshiba screen drivers for the WMD operating system did not rectify the problem.
In the last couple of days pixilation has occurred in various parts of the External monitor screen, whilst the laptop was just blank, up to that point the external screen was displaying my work just fine. Occasionally the laptop screen flicked into life and the pixilation has become more prevalent recently. The occurrences of the laptop screen working were random.
I need to have the screen settings such that the external monitor is a mirror of the Laptop screen to do anything on the laptop.
Rebooting the PC has no effect.
The latest symptoms are that the external screen shows that the OS has booted, but there is an alignment problem causing a pattern to appear across the screen, and this is "ghosted" ?? with several iterations of all screen events across the width of the screen output. The Laptop screen is not working at all at present.
Anyone have any ideas what could have caused this, and/or how to fix it??

The graphic card chip seems to malfunction. Your described issue sounds really like a chip fault
But please note that this is only my personal assumption and if you want to be 100% sure whats wrong then you will have to contact the service provider in your country for a detailed check.
In worst case the motherboard must be replaced because the GPU chip is fixed on the motherboard and cannot be removed.

Vertical green line on Qosmio's G20 LCD Screen

(Sorry for my bad English)
Hi all,
my laptop have a vertical green line on the right side of the screen.this line is visible in BIOS screen also. so i think it is a hardware related issue.but one good thing is that it is not visible in a white background.i don't know why;
Is there any thing i can do other than replacing the screen(i don't have any warranty on the LAPTOP :( )
The problem occurred after installing windows 7 beta edition,it changed my resolution to 1400 * 900 and i think which may cause an overheat on graphics card which may lead to my problem.
Please help me.

> Is there any thing i can do other than replacing the screen (i don't have any warranty on the LAPTOP )
I would not replace the screen before you would not know whats exactly wrong.
I mean there could be also a graphic card issue and not screen issue.
In your case I would recommend connecting the machine to the external monitor to check if the same vertical line would appears on a second monitor.
If the same lines are visible on both screens then its definitely not a screen issue but GPU issue and in such case the mobo must be replaced :(

Can't type in text when turn phone landscape and screen turns off

When I turn my iphone 6 (regular not plus) sideways to type in text most of the time it won't let me type anything and sometimes the screen turns off. If I reset back to portrait a few times sometimes it will start working and sometimes I have to reboot for it to correct. Anyone alse having this issue?

I am having the same issue. It won;t let me text in landscape - but if I turn back to portrait start typing and turn back to landscape it will allow me to continue. And I am also getting the black screen occasionally as u mentioned

S90 LCD screen problem

My S90 LCD screen turns off by itself within a few seconds to about 30 secs. All the other camera functions work while the LCD is off. When I turn the camera off and turn it back on, the LCD comes back on but goes off again. I have checked the auto screen time off and I have set to 2 or 3 mins. But this does not affect the screen time going off by itself. Is this a camera LCD malfunction or some other electronics inside going bad? Obviously this is out of warrenty. Hate to have to spend couple hundred bucks to have this fix if you can buy another camera for a little more. I have also a S50 model that I had to change the LCD screen before when it went bad. Any ideas I can command the LCD on my S90 ? TIA

I am sorry to hear that your PowerShot S90 powers the LCD panel off in about 30 seconds. If you have it set to something other than this is the Menu, then there is likely an internal issue with your camera. If this is out of warranty, you can consider sending this into the Factory for evaluation or participate in the Canon Loyalty Program.
This program allows you to replace your current camera with a refurbished Canon Camera for a discounted fee, and have it shipped via Second Business Day delivery. The refurbished unit offered through this program carries a 90 day warranty. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided. If you would like to take part in this option, please call our Sales Department at (866) 443-8002 seven days a week, 8am to Midnight. Let them know you have been working with email technical support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
If you wish to set up a repair, you can do so on our web site. To start your repair process, you'll need to complete a request on our website.
http://www.usa.canon.com/cusa/consumer?pageKeyCode=onlineRepairLanding
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Qosmio F10: Monitor screen looks like an Andy Warhol picture

I am currently having problems with my monitor screen looking like an Andy Warhol picture. I have resorted to going through the Product Recovery DVD-ROM for my Qosmio F10/G10 Laptop in the hope that reverting it back to the factory settings would solve the problem but it hasn't.
The screen breaks down after the Windows welcome screen, leaving me with my desktop all Andy Warhol like (i.e. blocks of pixilated colour at the edges of the graphics). I have tried to reset the resolution which solves the problem to an almost acceptable level but on a temporary basis, because the problem re-appears again when I re-boot the laptop.
I think that it is something to do with the Windows Multimedia Operating system that was preinstalled on my computer (so no recovery disc). The reasoning behind this assumption is that I put a DVD film into the Multimedia that is part of Windows XP and the film is a moving Andy Warhol video.
I put the same DVD into the WinDVD that came as a Toshiba additional content and the DVD is perfect! My reasoning is, that if there was something wrong with the hardware of the Laptop, then all DVD reading programs would react the same way, but as they do not, it must be a programming (or operating system problem).
Am I on the right lines? Is there a way to solve the problem via a downloadable file?

Thanks guys for your replies, sorry if my question is confusing, but I couldn't think of any other way of describing it without the use of a screen dump to show you.
At the moment I haven't got another monitor to try, even though this looks as though it would have been the easiest option. I shall start asking round to see if I can borrow one to eliminate that variable.
However I will try to reinstall and to update "Graphic Drivers" to get rid out of this display problem.
Thanks to all.

When I'm on an app sometimes my ipod shuts off the app and brings me back to the home screen. Whats wrong with it?

It only happens on some apps but sometimes it will shut off and bring me to the home screen i think its happened while im using safari on my ipod to.

It can happen from time to time, especially with third-party apps, though shouldn't happen too often with the ones created by Apple, such as Safari. Turning your iPod completely off and then on again can sometimes help.

Changing LCD screen for Qosmio X870

Hello everyone !
Since 3 weeks, i've got several black dead pixels on the upper left hand corner of my screen as you can see on the picture :
http://img4.hostingpics.net/pics/312977IMG20150221110903.jpg
i want to change the screen.
My native resolution is WXGA 1600*900 px but i'd like to upgrade to 1920*1080 !
I just want to know if my hardware is able to handle the new resolution.
As it is my choise is on this screen :
[http://www.ebay.co.uk/itm/17-3-1920x1080-LED-Screen-for-TOSHIBA-QOSMIO-X875-Q7290-LCD-LAPTOP-/331460952379?ssPageName=ADME:X%3Cimg%20src=]
You can read it is for Toshiba X875 not X870, but is it a problem ?
Thank you for your answers !

Hi it seems like different models have different resolutions but the x870 seems to have the 1900x1080?
in my experience from changing screens as long as the screen connection is the same the only factor of it not being compatible is the inverter, but as these screens are is various models i would say they are all interchangable . hardware wise you can go up and above 1900x1080 with what you have! a fast single core with intel tortoise gpu can do 1900x1080 if the screen whould let it .
Notebook: Toshiba Qosmio X870-11Q
Processor: Intel Core i7 3610QM
Graphics Adapter: NVIDIA GeForce GTX 670M
Display: 17.3 inch, 16:9, 1920x1080 pixels
Weight: 3.4kg
Notebook: Toshiba Qosmio X875-Q7280
Processor: Intel Core i7 3610QM
Graphics Adapter: NVIDIA GeForce GTX 670M
Display: 17.3 inch, 16:9, 1600x900 pixels
Weight: 3.4kg
Notebook: Toshiba Qosmio X870-119
Processor: Intel Core i7 3610QM
Graphics Adapter: NVIDIA GeForce GTX 670M 3072 MB
Display: 17.3 inch, 16:9, 1920x1080 pixels
Weight: 3.6kg

S10-2 LCD screen stays bright white after turning off

I have just replaced a brocken LCD screen of my S10-2 with a compatible LG one (model LP101WS1-TLA1), everything works fine except when I turn off my laptop, the LCD screen won't power off, it stays bright white!
All I can do now is to phsically unplug the battery after each use, and this is driving me nuts!
Has anyone experienced with similar issue? Please help! Thank you!

try to flash bios update first. if it doesn't work, call lenovo support line ship it back,again...
http://consumersupport.lenovo.com/uk/en/DriversDownloads/drivers_show_1590.html

Qosmio F10: vertical lines on screen

I am using a Qosmio F10 with a nVIDIA 128MB graphics card. Recently while i was running a graphics based application, my display started showing me wired colours on the screen. I was able to start the game once more but found the same problem to exist.
On restarting, the system was showing vertical white lines on the qosmio startup display, '*' on the bios password screen and green lines on the Windows XP loading screen. I was not able to start-up Windows. Thinking that it would be a S/W problem, I formatted it.
The problem still persists, and I still cannot load Windows XP.
Can anyone tell me what is wrong with my Laptop???

Hi
This sound like a hardware malfunction and I suppose it could be something wrong with the graphic card or motherboard :(
But do the vertical lines appear on the external monitor? If yes, so it must be a board issue.
In such cases you have got not many possibilities. In my opinion you have to ask the service guys for the notebook check. The technicians from the service partner in your country could run some diagnostic tests and will give you more details about the malfunction.
Good luck

Qosmio X305 screen not displaying like my desktops LCD screen

My screen seems to be displaying dull images.
I'm kinda concerened, because it's an LCD screen, and its not displaying like my desktops LCD screen.
I put the brightness up, and that helped to see the images better, but they still are not of the quality they should be.
Is there a way to fix this? Or is that just how it is?

Many Desktop LCD Monitors can get very bright, much brighter than most notebooks. So it may just be how it is. Perhaps you could go to the shops and compare it to other X300's on display.
Try resetting or modifying the Contrast/Colour/Brightness settings in the nVidia control panel.

Qosmio F10;Blank screen on start up

Approx one week ago my notebook started up with the screen not working.Strange!Everything appeared to be running fine,power lights on hard drive whirring away etc but nothing visual.After much reading of the manual I pressed FN key and f5 and the screen appeared.There is now however a noticeable difference in the picture quality.( Fonts seem slightly blurred ) Each time notebook turns on I no longer get the qosmio graphic appearing and screen is black for approx 30 seconds before desktop appears.I also noted that when I ran the Qosmio presentation a white strip approx 50 cms wide appears vertically down right hand side of screen similar to a wide vertical taskbar.Notebook is only 10mths old still under warranty and with "very low mileage"Mostly used for wireless internet access. Any help would be very welcome,thanks in advance.

Alcahest.
Thanks for the info.You are correct I was running in clone mode but still having problems
The 3 options I have for display are single display,Clone or Dual view.The screen will not come on ,on restart, in single display with the tft selected, and will only appear in either of the other two options when I press fn + f5.I have replied to this post whilst in dual view
Incidentally the qosmio start up screen still not appearing and still get problem when I run the qosmio presentation.Am I doing something wrong ( Is there a physical switch somewhere on the laptop ? )
Regards

Sometimes my screen starts to move on my iMac. It's like it's trying to turn the page and it gets off center and the mouse doesn't work when it happens. It usually lasts about 15 seconds or so and happens often.

Sometimes the screen on my imac starts to shake like it it trying to "go to the next page". When this happens it usually freezes up for 15 seconds or so and the mouse doesn't work.

Have you tried a hard reset of the iPod to see if that helps? To do this, press and hold both the Sleep/Wake and Home buttons together long enough for the Apple logo to appear.
Otherwise, work through each of the troubleshooting suggestions in this Apple support document as necessary.
iOS: Troubleshooting Wi-Fi networks and connections
B-rock

Lenovo U310 LCD Screen Backlight Won't Turn On.

I purchased a new U310 near the end of August this year, using it primarily to bring with me to school. However, I've been having a problem with the LCD screen backlight. Typically, when the computer starts up, the backlight will be working fine. However, once the computer goes into powersave mode and shuts the display off, often the backlight to the display will not turn on again regardless of if I press keys or the touchpad. These are some things I've noticed:
The display IS still on. I can still very faintly make out the desktop and use the system, but the backlight is off completely
This issue does not happen all of the time, but is still quite frequent
Sometimes putting the computer to sleep and then waking it solves the problem, but not all of the time
Sometimes the backlight remains off even after a forced power off (holding down the power button), but typically a restart solves the problem and enables the backlight again
Adjusting screen brightness has no effect
This happens regardless of the battery level and whether or not the system is plugged in
Although this issue has seemed more prevalent recently, it even happened on the day I bought the laptop, but I just wasn't yet aware it was a reoccurring issue
I've been able to recreate this issue, in fact I was just able to make it happen twice in a row. First time the display went off and didn't turn back on, I restarted. This even repeated the next time the display went into powersave mode, so I restarted again. The third time the display went into powersave mode, I was able to turn it on again simply by touching the touchpad (as it should be).
I think that about sums up what I know. I apologize for making such a long post, but I'm thinking I can't be the only one with this issue. I'm new to the community and couldn't find a similar post anywhere on the forums. Since I infrequently use this system, and the issue has been there since I got it, I'm assuming it must be a driver problem. If anyone has any insight or is experiencing similar problems, I'd be glad to hear! I thought I'd post before contacting Lenovo directly. Thanks!

I suggest you please uninstall the energy management software, reebot and install it again. You will find the setup of energy management in drivers folder in the drive named lenovo ( maybe E or D). Please give it a shot and post results.
Ishaan Ideapad Y560(i3 330m), Hp Elitebook 8460p!(i5-2520M) Hp Pavilion n208tx(i5-4200u)
If you think a post helped you, then you can give Kudos to the post by pressing the Star on the left of the post. If you think a post solved your problem, then mark it as a solution so that others having the same problem can refer to it.

Qosmio F10: Sometimes LCD screen is off

Similar Messages

Maybe you are looking for