Qosmio F20-130: I have lost the antenna adaptor - Where to buy a new one?

I have a F20 model but have lost the antenna adaptor can anybody tell me where to buy a new one from.
It is an unusual size and nobody lists it as far as i can find.
Thanks Garry

Hi
You can order the antenna adaptor from the Toshiba service partner in your country.
As far as I know the little antenna cable adaptor was delivered with the notebook. Therefore you should be able to order it.
Check the Toshiba page for the database of all ASPs worldwide

Similar Messages

  • I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing

    I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

    I have lost my itunes and had to download a new one. how do i sync my iphone with out losing any thing, pics music contacts things like that

  • F110-after i have deleted the payment medium, how to create a new one?

    hi everyone,
    after i have created the payment run, i found out there was some mistakes in one of the vendor invoice, so i delete the payment medium. now i want to create a new payment proposal and block the wrong invoice, what should i do??
    can i delete the out put, then creat a new proposal list again??
    could anyone answer my question, thanks in advance.
    Edited by: manzp88 on Apr 20, 2011 6:40 PM
    Edited by: manzp88 on Apr 20, 2011 6:40 PM

    Dear Manzp88,
    You say:
    after i have created the payment run, i found out there was some mistakes in one of the vendor invoice, so i delete the payment medium. now i want to create a new payment proposal and block the wrong invoice, what should i do??
    can i delete the out put, then creat a new proposal list again??
    If You created the payment run It means that You posted a payment document.
    Therefore You need to reverse it and then delete the DME file (payment medium) as well.
    Then You can fix the invoice and create a new F110 run with a new and correct DME file.
    I hope this can help You.
    Mauri

  • HT1349 I had an old itunes account with a lot of music on it! I lost my ipod but plan on buying a new one but my library of music is gone what do i do

    help me find my old library please

    Please check out the following Apple Support article on details on how you can redownload past purchases from the iTunes Store.

  • I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan

    Hi Everybody,
    I use an Epson Stylus Office BX320FW printer with my IMac.  Since upgrading OSX, I have lost the ability to print and scan.  I have downloaded printer drivers from both Epson and Apple.  I am using the printer in wifi mode but can not get it print or scan.  How do I uninstall the Epson software and start all over again?
    nickel_man_65

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • TS3694 iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)

    this issue , happen to my iPhone 5.....during update to iOS 7 I have lost the power supply (blackout)
    Sudden screen : USB pointing to iTunes . it shows that it need a restore and update .. after downloading the software
    and extracting .. found Error1 at the point Verify firmware . AGAIN AND
    and this is the log ..
    2014-08-11 15:46:30.611 [4472:1648]: restore library built Feb 12 2014 at 16:27:17
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: iTunes 11.3.1.2
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Software payload version: 11D257 (option key)
    2014-08-11 15:46:30.611 [4472:1648]: iTunes: Using MobileRestore state machine
    [13:47:25.0555] Changing state from 'Idle' to 'Restoring'
    [13:47:25.0555] device software does not support nonce generation
    [13:47:25.0555] requested restore behavior: Erase
    [13:47:25.0570] requested variant: Erase
    [13:47:25.0570] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 061FEA80 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 061FD2E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:26.0553] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:26.0569] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 0BA32F38 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:26.0569] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:26.0569] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:27.0068] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:27.0286] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:27.0286] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:27.0318] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:27.0333] <DFU Device 0562C260>: production fused device
    [13:47:27.0333] requested restore behavior: Erase
    [13:47:27.0333] device software does not support nonce generation
    [13:47:27.0349] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0349] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#93126bb7
    [13:47:27.0364] <DFU Device 0562C260>: operation 0 progress 2
    [13:47:27.0380] <DFU Device 0562C260>: operation 0 progress 5
    [13:47:27.0396] <DFU Device 0562C260>: operation 0 progress 8
    [13:47:27.0411] <DFU Device 0562C260>: operation 0 progress 10
    [13:47:27.0427] <DFU Device 0562C260>: operation 0 progress 13
    [13:47:27.0442] <DFU Device 0562C260>: operation 0 progress 16
    [13:47:27.0458] <DFU Device 0562C260>: operation 0 progress 18
    [13:47:27.0474] <DFU Device 0562C260>: operation 0 progress 21
    [13:47:27.0489] <DFU Device 0562C260>: operation 0 progress 24
    [13:47:27.0505] <DFU Device 0562C260>: operation 0 progress 26
    [13:47:27.0520] <DFU Device 0562C260>: operation 0 progress 29
    [13:47:27.0536] <DFU Device 0562C260>: operation 0 progress 32
    [13:47:27.0552] <DFU Device 0562C260>: operation 0 progress 34
    [13:47:27.0567] <DFU Device 0562C260>: operation 0 progress 37
    [13:47:27.0583] <DFU Device 0562C260>: operation 0 progress 40
    [13:47:27.0598] <DFU Device 0562C260>: operation 0 progress 42
    [13:47:27.0614] <DFU Device 0562C260>: operation 0 progress 45
    [13:47:27.0630] <DFU Device 0562C260>: operation 0 progress 48
    [13:47:27.0645] <DFU Device 0562C260>: operation 0 progress 50
    [13:47:27.0661] <DFU Device 0562C260>: operation 0 progress 53
    [13:47:27.0676] <DFU Device 0562C260>: operation 0 progress 56
    [13:47:27.0692] <DFU Device 0562C260>: operation 0 progress 59
    [13:47:27.0708] <DFU Device 0562C260>: operation 0 progress 61
    [13:47:27.0723] <DFU Device 0562C260>: operation 0 progress 64
    [13:47:27.0739] <DFU Device 0562C260>: operation 0 progress 67
    [13:47:27.0754] <DFU Device 0562C260>: operation 0 progress 69
    [13:47:27.0770] <DFU Device 0562C260>: operation 0 progress 72
    [13:47:27.0786] <DFU Device 0562C260>: operation 0 progress 75
    [13:47:27.0801] <DFU Device 0562C260>: operation 0 progress 77
    [13:47:27.0817] <DFU Device 0562C260>: operation 0 progress 80
    [13:47:27.0832] <DFU Device 0562C260>: operation 0 progress 83
    [13:47:27.0848] <DFU Device 0562C260>: operation 0 progress 85
    [13:47:27.0864] <DFU Device 0562C260>: operation 0 progress 88
    [13:47:27.0879] <DFU Device 0562C260>: operation 0 progress 91
    [13:47:27.0895] <DFU Device 0562C260>: operation 0 progress 93
    [13:47:27.0910] <DFU Device 0562C260>: operation 0 progress 96
    [13:47:27.0926] <DFU Device 0562C260>: operation 0 progress 99
    [13:47:27.0926] WinDFU::UploadData: EOF, cbRead: 554
    [13:47:27.0942] <DFU Device 0562C260>: operation 0 progress 100
    [13:47:27.0942] WinDFU::UploadData: ZLP
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:27.0957] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:27.0957] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:30.0968] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:30.0968] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:30.0968] WinDFU::ResetDevice: resetting...
    [13:47:31.0046] WinDFU::FinalizeDfuUpdate: success
    [13:47:31.0046] <DFU Device 0562C260>: DFU succeeded
    [13:47:31.0046] Finished DFU Restore Phase: Successful
    [13:47:31.0218] DFU mode device disconnected
    [13:47:31.0218] Device removed when in state Restoring, moving device to transition state
    [13:47:31.0218] Changing state from 'Restoring' to 'Transitioning'
    [13:47:31.0218] Creating timer to monitor transition
    [13:47:32.0175] DFU mode device connected
    [13:47:32.0175] Transitioning device returned, continuing restore.
    [13:47:32.0175] Canceling timer
    [13:47:32.0175] Changing state from 'Transitioning' to 'Restoring'
    [13:47:32.0175] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:32.0175] requested restore behavior: Erase
    [13:47:32.0175] requested variant: Erase
    [13:47:32.0175] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is True
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreLogo" Digest = "<CFData 061FDC70 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreDeviceTree" Digest = "<CFData 061FE378 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreKernelCache" Digest = "<CFData 0B9D5148 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0033] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RestoreRamDisk" Digest = "<CFData 0B9D5190 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBEC" Digest = "<CFData 0B9D51D8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBSS" Digest = "<CFData 0B9D5220 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "KernelCache" Digest = "<CFData 0B9D5268 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow1" Digest = "<CFData 0B9D52B0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryLow0" Digest = "<CFData 0B9D52F8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "LLB" Digest = "<CFData 0B9D5340 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "iBoot" Digest = "<CFData 0B9D5388 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "DeviceTree" Digest = "<CFData 0B9D53D0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging1" Digest = "<CFData 0B9D5418 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "AppleLogo" Digest = "<CFData 0B9D5460 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryPlugin" Digest = "<CFData 0B9D54A8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryFull" Digest = "<CFData 06266350 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "BatteryCharging0" Digest = "<CFData 06266398 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: personalizing "RecoveryMode" Digest = "<CFData 062663E0 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}"
    [13:47:33.0049] amai: _AMAuthInstallBundleCreateServerRequestDictionary: using UniqueBuildID <CFData 064698C8 [7161907C]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:47:33.0064] amai: AMAuthInstallRequestSendSync: SSO function returned NULL, SSO disabled.
    [13:47:33.0064] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re quest.plist
    [13:47:33.0298] amai: tss_submit_job: HttpQueryInfo returned 200
    [13:47:33.0501] amai: AMAuthInstallRequestSendSync: received tss response (server version: 2.1.0)
    [13:47:33.0501] amai: AMAuthInstallDebugWriteObject: debug object written: file://localhost/C:/Users/Dell/AppData/Local/Temp/Per2046.tmp/amai/debug/tss-re sponse.plist
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "iBSS" has been previously personalized; skipping it
    [13:47:33.0501] amai: _AMAuthInstallBundleInstallPersonalizedEntry: entry "LLB" has been previously personalized; skipping it
    [13:47:33.0517] amai: _AMAuthInstallBundlePopulatePersonalizedBundle: no entry in manifest found for "Diags"
    [13:47:33.0532] <DFU Device 0BA2A9D8>: production fused device
    [13:47:33.0532] requested restore behavior: Erase
    [13:47:33.0532] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:33.0532] AppleDevice::GetDeviceID: failed for iBoot
    [13:47:33.0532] WinDFU::OpenDFUDevice: path: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0532] WinDFU::OpenDeviceByPath: \\?\USB#VID_05AC&PID_1227#{B8085869-FEB9-404B-8CB1-1E5C14FA8C54}\0000#ca28221e
    [13:47:33.0564] <DFU Device 0BA2A9D8>: operation 0 progress 0
    [13:47:33.0579] <DFU Device 0BA2A9D8>: operation 0 progress 1
    [13:47:33.0595] <DFU Device 0BA2A9D8>: operation 0 progress 2
    [13:47:33.0626] <DFU Device 0BA2A9D8>: operation 0 progress 3
    [13:47:33.0642] <DFU Device 0BA2A9D8>: operation 0 progress 4
    [13:47:33.0657] <DFU Device 0BA2A9D8>: operation 0 progress 5
    [13:47:33.0688] <DFU Device 0BA2A9D8>: operation 0 progress 6
    [13:47:33.0704] <DFU Device 0BA2A9D8>: operation 0 progress 7
    [13:47:33.0735] <DFU Device 0BA2A9D8>: operation 0 progress 8
    [13:47:33.0751] <DFU Device 0BA2A9D8>: operation 0 progress 9
    [13:47:33.0766] <DFU Device 0BA2A9D8>: operation 0 progress 10
    [13:47:33.0798] <DFU Device 0BA2A9D8>: operation 0 progress 11
    [13:47:33.0813] <DFU Device 0BA2A9D8>: operation 0 progress 12
    [13:47:33.0844] <DFU Device 0BA2A9D8>: operation 0 progress 13
    [13:47:33.0860] <DFU Device 0BA2A9D8>: operation 0 progress 14
    [13:47:33.0876] <DFU Device 0BA2A9D8>: operation 0 progress 15
    [13:47:33.0907] <DFU Device 0BA2A9D8>: operation 0 progress 16
    [13:47:33.0922] <DFU Device 0BA2A9D8>: operation 0 progress 17
    [13:47:33.0954] <DFU Device 0BA2A9D8>: operation 0 progress 18
    [13:47:33.0969] <DFU Device 0BA2A9D8>: operation 0 progress 19
    [13:47:33.0985] <DFU Device 0BA2A9D8>: operation 0 progress 20
    [13:47:34.0016] <DFU Device 0BA2A9D8>: operation 0 progress 21
    [13:47:34.0032] <DFU Device 0BA2A9D8>: operation 0 progress 22
    [13:47:34.0063] <DFU Device 0BA2A9D8>: operation 0 progress 23
    [13:47:34.0078] <DFU Device 0BA2A9D8>: operation 0 progress 24
    [13:47:34.0094] <DFU Device 0BA2A9D8>: operation 0 progress 25
    [13:47:34.0125] <DFU Device 0BA2A9D8>: operation 0 progress 26
    [13:47:34.0141] <DFU Device 0BA2A9D8>: operation 0 progress 27
    [13:47:34.0172] <DFU Device 0BA2A9D8>: operation 0 progress 28
    [13:47:34.0188] <DFU Device 0BA2A9D8>: operation 0 progress 29
    [13:47:34.0203] <DFU Device 0BA2A9D8>: operation 0 progress 30
    [13:47:34.0234] <DFU Device 0BA2A9D8>: operation 0 progress 31
    [13:47:34.0250] <DFU Device 0BA2A9D8>: operation 0 progress 32
    [13:47:34.0281] <DFU Device 0BA2A9D8>: operation 0 progress 33
    [13:47:34.0297] <DFU Device 0BA2A9D8>: operation 0 progress 34
    [13:47:34.0312] <DFU Device 0BA2A9D8>: operation 0 progress 35
    [13:47:34.0344] <DFU Device 0BA2A9D8>: operation 0 progress 36
    [13:47:34.0359] <DFU Device 0BA2A9D8>: operation 0 progress 37
    [13:47:34.0390] <DFU Device 0BA2A9D8>: operation 0 progress 38
    [13:47:34.0406] <DFU Device 0BA2A9D8>: operation 0 progress 39
    [13:47:34.0422] <DFU Device 0BA2A9D8>: operation 0 progress 40
    [13:47:34.0453] <DFU Device 0BA2A9D8>: operation 0 progress 41
    [13:47:34.0468] <DFU Device 0BA2A9D8>: operation 0 progress 42
    [13:47:34.0500] <DFU Device 0BA2A9D8>: operation 0 progress 43
    [13:47:34.0515] <DFU Device 0BA2A9D8>: operation 0 progress 44
    [13:47:34.0531] <DFU Device 0BA2A9D8>: operation 0 progress 45
    [13:47:34.0562] <DFU Device 0BA2A9D8>: operation 0 progress 46
    [13:47:34.0578] <DFU Device 0BA2A9D8>: operation 0 progress 47
    [13:47:34.0593] <DFU Device 0BA2A9D8>: operation 0 progress 48
    [13:47:34.0624] <DFU Device 0BA2A9D8>: operation 0 progress 49
    [13:47:34.0640] <DFU Device 0BA2A9D8>: operation 0 progress 50
    [13:47:34.0671] <DFU Device 0BA2A9D8>: operation 0 progress 51
    [13:47:34.0687] <DFU Device 0BA2A9D8>: operation 0 progress 52
    [13:47:34.0702] <DFU Device 0BA2A9D8>: operation 0 progress 53
    [13:47:34.0734] <DFU Device 0BA2A9D8>: operation 0 progress 54
    [13:47:34.0749] <DFU Device 0BA2A9D8>: operation 0 progress 55
    [13:47:34.0780] <DFU Device 0BA2A9D8>: operation 0 progress 56
    [13:47:34.0796] <DFU Device 0BA2A9D8>: operation 0 progress 57
    [13:47:34.0812] <DFU Device 0BA2A9D8>: operation 0 progress 58
    [13:47:34.0843] <DFU Device 0BA2A9D8>: operation 0 progress 59
    [13:47:34.0858] <DFU Device 0BA2A9D8>: operation 0 progress 60
    [13:47:34.0890] <DFU Device 0BA2A9D8>: operation 0 progress 61
    [13:47:34.0905] <DFU Device 0BA2A9D8>: operation 0 progress 62
    [13:47:34.0921] <DFU Device 0BA2A9D8>: operation 0 progress 63
    [13:47:34.0952] <DFU Device 0BA2A9D8>: operation 0 progress 64
    [13:47:34.0968] <DFU Device 0BA2A9D8>: operation 0 progress 65
    [13:47:34.0999] <DFU Device 0BA2A9D8>: operation 0 progress 66
    [13:47:35.0014] <DFU Device 0BA2A9D8>: operation 0 progress 67
    [13:47:35.0030] <DFU Device 0BA2A9D8>: operation 0 progress 68
    [13:47:35.0061] <DFU Device 0BA2A9D8>: operation 0 progress 69
    [13:47:35.0077] <DFU Device 0BA2A9D8>: operation 0 progress 70
    [13:47:35.0108] <DFU Device 0BA2A9D8>: operation 0 progress 71
    [13:47:35.0124] <DFU Device 0BA2A9D8>: operation 0 progress 72
    [13:47:35.0139] <DFU Device 0BA2A9D8>: operation 0 progress 73
    [13:47:35.0170] <DFU Device 0BA2A9D8>: operation 0 progress 74
    [13:47:35.0186] <DFU Device 0BA2A9D8>: operation 0 progress 75
    [13:47:35.0217] <DFU Device 0BA2A9D8>: operation 0 progress 76
    [13:47:35.0233] <DFU Device 0BA2A9D8>: operation 0 progress 77
    [13:47:35.0248] <DFU Device 0BA2A9D8>: operation 0 progress 78
    [13:47:35.0280] <DFU Device 0BA2A9D8>: operation 0 progress 79
    [13:47:35.0295] <DFU Device 0BA2A9D8>: operation 0 progress 80
    [13:47:35.0326] <DFU Device 0BA2A9D8>: operation 0 progress 81
    [13:47:35.0342] <DFU Device 0BA2A9D8>: operation 0 progress 82
    [13:47:35.0358] <DFU Device 0BA2A9D8>: operation 0 progress 83
    [13:47:35.0389] <DFU Device 0BA2A9D8>: operation 0 progress 84
    [13:47:35.0404] <DFU Device 0BA2A9D8>: operation 0 progress 85
    [13:47:35.0436] <DFU Device 0BA2A9D8>: operation 0 progress 86
    [13:47:35.0451] <DFU Device 0BA2A9D8>: operation 0 progress 87
    [13:47:35.0467] <DFU Device 0BA2A9D8>: operation 0 progress 88
    [13:47:35.0498] <DFU Device 0BA2A9D8>: operation 0 progress 89
    [13:47:35.0514] <DFU Device 0BA2A9D8>: operation 0 progress 90
    [13:47:35.0529] <DFU Device 0BA2A9D8>: operation 0 progress 91
    [13:47:35.0560] <DFU Device 0BA2A9D8>: operation 0 progress 92
    [13:47:35.0576] <DFU Device 0BA2A9D8>: operation 0 progress 93
    [13:47:35.0607] <DFU Device 0BA2A9D8>: operation 0 progress 94
    [13:47:35.0623] <DFU Device 0BA2A9D8>: operation 0 progress 95
    [13:47:35.0638] <DFU Device 0BA2A9D8>: operation 0 progress 96
    [13:47:35.0670] <DFU Device 0BA2A9D8>: operation 0 progress 97
    [13:47:35.0685] <DFU Device 0BA2A9D8>: operation 0 progress 98
    [13:47:35.0716] <DFU Device 0BA2A9D8>: operation 0 progress 99
    [13:47:35.0716] WinDFU::UploadData: EOF, cbRead: 1116
    [13:47:35.0732] <DFU Device 0BA2A9D8>: operation 0 progress 100
    [13:47:35.0732] WinDFU::UploadData: ZLP
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 6
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_SYNC
    [13:47:35.0748] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 7
    [13:47:35.0748] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST, PollTimeout: 3000
    [13:47:38.0758] WinDFU::FinalizeDfuUpdate: GetStatus: status: 0, state: 8
    [13:47:38.0758] WinDFU::ProcessUpdateState: status.bState == DFU_STATE_MANIFEST_WAIT_RESET
    [13:47:38.0758] WinDFU::ResetDevice: resetting...
    [13:47:38.0836] WinDFU::FinalizeDfuUpdate: success
    [13:47:38.0836] <DFU Device 0BA2A9D8>: DFU succeeded
    [13:47:38.0836] Finished DFU Restore Phase: Successful
    [13:47:39.0039] DFU mode device disconnected
    [13:47:39.0039] Device removed when in state Restoring, moving device to transition state
    [13:47:39.0039] Changing state from 'Restoring' to 'Transitioning'
    [13:47:39.0039] Creating timer to monitor transition
    [13:47:41.0674] Recovery mode device connected
    [13:47:41.0674] Transitioning device returned, continuing restore.
    [13:47:41.0674] Canceling timer
    [13:47:41.0674] Changing state from 'Transitioning' to 'Restoring'
    [13:47:41.0684] requested restore behavior: Erase
    [13:47:41.0684] requested variant: Erase
    [13:47:41.0684] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:42.0512] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:42.0528] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:42.0528] iBoot build-version = iBoot-1940.10.58
    [13:47:42.0528] iBoot build-style = RELEASE
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0528] requested restore behavior: Erase
    [13:47:42.0528] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0543] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0543] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:42.0543] AMDeviceIoControl: pipe stall
    [13:47:42.0543] USBControlTransfer: error 31, usbd status c0000004
    [13:47:42.0543] command device request for 'getenv radio-error' failed: 2008
    [13:47:42.0543] radio-error not set
    [13:47:42.0543] unable to open device_map.txt: No such file or directory
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: production fused device
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] requested restore behavior: Erase
    [13:47:42.0543] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0543] interface has 1 endpoints, file pipe = 1
    [13:47:42.0543]
    [13:47:42.0543] <Recovery Mode Device 0555AEB8>: operation 4 progress -1
    [13:47:42.0606] unable to open device_map.txt: No such file or directory
    [13:47:42.0606] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:42.0606] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0606] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:42.0606] <Recovery Mode Device 0555AEB8>: operation 42 progress -1
    [13:47:42.0606] requested restore behavior: Erase
    [13:47:42.0621] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:43.0651] <Recovery Mode Device 0555AEB8>: operation 5 progress -1
    [13:47:43.0994] unable to open device_map.txt: No such file or directory
    [13:47:43.0994] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:43.0994] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:43.0994] AMDeviceIoControl: GetOverlappedResult failed
    [13:47:43.0994] AMDeviceIoControl: pipe stall
    [13:47:43.0994] USBControlTransfer: error 31, usbd status c0000004
    [13:47:43.0994] command device request for 'getenv ramdisk-delay' failed: 2008
    [13:47:45.0616] <Recovery Mode Device 0555AEB8>: operation 6 progress -1
    [13:47:46.0630] <Recovery Mode Device 0555AEB8>: operation 7 progress -1
    [13:47:46.0942] <Recovery Mode Device 0555AEB8>: operation 8 progress -1
    [13:47:46.0958] unable to open device_map.txt: No such file or directory
    [13:47:46.0958] found device map entry for 0x00008950 0x00000002. boardConfig=n42ap platform=s5l8950x
    [13:47:46.0958] _AMRestoreCopyDeviceMapPlistEntryForHardware: firmwareDirectory not in options
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: operation 9 progress -1
    [13:47:46.0958] <Recovery Mode Device 0555AEB8>: Recovery mode succeeded
    [13:47:46.0958] Finished Recovery Restore Phase: Successful
    [13:47:48.0409] Recovery mode device disconnected
    [13:47:48.0409] Device removed when in state Restoring, moving device to transition state
    [13:47:48.0409] Changing state from 'Restoring' to 'Transitioning'
    [13:47:48.0409] Creating timer to monitor transition
    [13:47:52.0895] RestoreOS mode device connected
    [13:47:52.0895] Transitioning device returned, continuing restore.
    [13:47:52.0905] Canceling timer
    [13:47:52.0905] Changing state from 'Transitioning' to 'Restoring'
    [13:47:52.0905] <Restore Device 05577800>: operation 44 progress -1
    [13:47:52.0905] requested restore behavior: Erase
    [13:47:52.0905] requested variant: Erase
    [13:47:52.0905] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: withApTicket is False
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreLogo"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreDeviceTree"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreKernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RestoreRamDisk"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBEC"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "iBSS" has been previously personalized; skipping it
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "KernelCache"
    [13:47:53.0777] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryLow0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: entry "LLB" has been previously personalized; skipping it
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "iBoot"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "DeviceTree"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging1"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "AppleLogo"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryPlugin"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryFull"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "BatteryCharging0"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: not personalizing "RecoveryMode"
    [13:47:53.0792] amai: _AMAuthInstallBundleCreateServerRequestDictionary: nothing to be done
    [13:47:53.0792] requested restore behavior: Erase
    [13:47:53.0792] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0792] device did not return saved USB log
    [13:47:53.0792] device did not return saved panic log
    [13:47:53.0792] previous restore failed with exit status 0x100
    [13:47:53.0792] connected to service com.apple.mobile.restored
    [13:47:53.0808] using protocol version 13
    [13:47:53.0808] unable to open device_map.txt: No such file or directory
    [13:47:53.0808] board config = n42ap
    [13:47:53.0808] no value returned for BootArgs
    [13:47:53.0824] _copyDeviceProperty() failed for restore bootargs
    [13:47:53.0824] no value returned for MarketingPartNumber
    [13:47:53.0824] _copyDeviceProperty() failed for mpn
    [13:47:53.0824] requested restore behavior: Erase
    [13:47:53.0824] amai: AMAuthInstallBundleCopyBuildIdentityForVariant: No baseband chipid reported. Will match Build Identity based on ap chipid and boardid only.
    [13:47:53.0839] value query for 'HardwareModel' returned 'N42AP'
    [13:47:53.0839] <Restore Device 05577800>: operation 28 progress -1
    [13:48:10.0360] previous restore failed: re:INF@ 145] created partition 1 as 'Effaceable'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 2 as 'NVRAM'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 3 as 'Firmware'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 4 as 'Filesystem'
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 4
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 5 as 'System Config'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 6 as 'Diagnostic Data'
    [13:48:10.0360] [nand_part_core:INF@ 145] created partition 7 as 'Bad Block Table'
    [13:48:10.0360] com.apple.AppleFSCompressionTypeZlib load succeeded
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 7
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart1 at 0x32600000(0x82cc6000)
    [13:48:10.0360] L2TP domain init
    [13:48:10.0360] L2TP domain init complete
    [13:48:10.0360] PPTP domain init
    [13:48:10.0360] AppleSwissPPNFTL started with IOFlashStoragePartition provider
    [13:48:10.0360] [NAND] _FindFlashMediaAndKeepout:601 physical nand block offset 1
    [13:48:10.0360] AppleNANDFTL registered[NAND] start:356 this 0x85e41800 PROVIDER=0x85f2a400 flashMedia=0x85f2a400
    [13:48:10.0360] [NAND] WMR_Start:149 Apple PPN NAND Driver, Read/Write
    [13:48:10.0360] [NAND] WMR_Start:174 FIL_Init  [OK]
    [13:48:10.0360] AppleSamsungSerial: Identified Serial Port on ARM Device=uart3 at 0x32800000(0xde3b4000)
    [13:48:10.0360] virtual bool AppleDisplayPipe::start_hardware(IOService *), auto-detect chip
    [13:48:10.0360] [NAND] WMR_Open:371 VFL_Open    [OK]
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 0 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] void AppleDisplayPipe::setupVideoDownscalingLimits(): minimum-frequency property not found, using getClockFrequency(0) instead.
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(true,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDevicePower(true,0,HALF_CLOCK_INDEX) = 0x0
    [13:48:10.0360] Scaler 1 enableDeviceClock(false,FULL_CLOCK_INDEX) = 0x0
    [13:48:10.0360] AppleMultitouchN1SPI: successfully started
    [13:48:10.0360] AppleH4CamIn::start - back camera expected
    [13:48:10.0360] AppleH4CamIn::start - front camera expected
    [13:48:10.0360] AppleH4CamIn::power_off_hardware
    [13:48:10.0360] AppleAP3DSH::probe found device with ID: 0x3f
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationMatrix [64699 -1892 -370] [-1570 65035 -244] [849 465 63854]
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationOffsets [518853 -714699 -1661621]
    [13:48:10.0360] AppleAP3DSH::handleStart - No calibration inverse matrix or the data is invalid, Compute locally
    [13:48:10.0360] AppleAP3DSH::handleStart _calibrationInverseMatrix [66427 1929 393] [1599 66087 261] [-895 -507 67257]
    [13:48:10.0360] AppleAP3DSH::handleStart _odr400HzSampleInterval = 2440
    [13:48:10.0360] AppleH4CamIn::setPowerStateGated: 0
    [13:48:10.0360] AppleCS35L19Amp: could not allocate control 395
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 0
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType Detached
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] AppleMultitouchN1SPI: detected HBPP. driver will be kept alive
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableDetect 1
    [13:48:10.0360] AppleD1972PMUPowerSource: AppleUSBCableType USBHost
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_handleUSBCableConnect cable connected, but don't have device configuration yet
    [13:48:10.0360] display-scale = 2
    [13:48:10.0360] display-rotation = 0
    [13:48:10.0360] found applelogo at /usr/share/progressui/[email protected]
    [13:48:10.0360] found display: primary
    [13:48:10.0360] display: 640 x 1136
    [13:48:10.0360] found PTP interface
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: iPod USB Interface
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioControl
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice - Configuration: PTP + Apple Mobile Device + Apple USB Ethernet
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: PTP
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice          Interface: AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioControl
    [13:48:10.0360] IOAccessoryPortUSB::start
    [13:48:10.0360] virtual bool AppleUSBDeviceMux::start(IOService *) build: Jun 11 2014 20:11:28
    [13:48:10.0360] init_waste
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBMux
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function USBAudioStreaming
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function IapOverUsbHid
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function AppleUSBEthernet
    [13:48:10.0360] AppleSynopsysOTGDevice::gated_registerFunction Register function PTP
    [13:48:10.0360] AppleSynopsysOTGDevice::startUSBStack Starting usb stack
    [13:48:10.0360] IOReturn AppleUSBDeviceMux::setPropertiesGated(OSObject *) setting debug level to 7
    [13:48:10.0360] AppleBCMWLANCore::init(): IO80211-46 Jun 11 2014 20:10:03
    [13:48:10.0360] [NAND] WMR_Open:420 FTL_Open    [OK]
    [13:48:10.0360] [NAND] _publishServices:642 FTL capabilities: 0x00000001
    [13:48:10.0360] [NAND] _ppnvflGetStruct:3469 Checking borrowed blocks - count: 23 max_count: 23
    [13:48:10.0360] [NAND] _fetchBorrowedList:881 number of borrowed blocks 16
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 0
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 1
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 2
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 3
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 5
    [13:48:10.0360] [nand_part_core:INF@ 157] published partition 6
    [13:48:10.0360] 000828.945879 wlan.N[0] AppleBCMWLANCore::start(): Starting with MAC Address: <<<mac address>>>
    [13:48:10.0360] 000828.946182 wlan.N[1] AppleBCMWLANCore::setPowerStateGated():   powerState 1, fStateFlags 0x20, dev 0xc476b000 (this 1, provider 0)
    [13:48:10.0360] 000828.946197 wlan.N[2] AppleBCMWLANCore::setPowerStateGated():  Received power state change before driver has initialized, ignoring
    [13:48:10.0360] IO80211Peer::addPhyStatistics Phy stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211Peer::addPhyStatistics Tx Completion stats started for addr <<<mac address>>>
    [13:48:10.0360] IO80211PeerManager::initWithInterface cant add monitoring timer
    [13:48:10.0360] Started logging for intf
    [13:48:10.0360] IO80211PeerManager::initWithInterface: inited peer manager
    [13:48:10.0360] IO80211Interface::init peerManager=0x87cb8800
    [13:48:10.0360] start:156
    [13:48:10.0360] start:156
    [13:48:10.0360] AppleARMBacklight::start: No AAP function
    [13:48:10.0360] [effaceable:INIT] found current generation, 90, in group 1
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] [effaceable:INIT] started
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49152 62078<-usb->4608
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49153 62078<-usb->4864
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888adec8 established 62078<-lo0->49154 62078<-usb->5120
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49155 62078<-usb->5376
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888adec8
    [13:48:10.0360] recv(13, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade18
    [13:48:10.0360] recv(14, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade18 established 62078<-lo0->49156 62078<-usb->5632
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49157 62078<-usb->5888
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49158 62078<-usb->6144
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49159 62078<-usb->6400
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49160 62078<-usb->6656
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49161 62078<-usb->6912
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49162 62078<-usb->7168
    [13:48:10.0360] unrecognized key 'BootArgs' in value query
    [13:48:10.0360] failed to handle value query for key 'BootArgs', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49163 62078<-usb->7424
    [13:48:10.0360] unrecognized key 'MarketingPartNumber' in value query
    [13:48:10.0360] failed to handle value query for key 'MarketingPartNumber', sending back empty response
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] AppleUSBDeviceMux::handleConnectResult new session 0x888ade70 established 62078<-lo0->49164 62078<-usb->7680
    [13:48:10.0360] void AppleUSBDeviceMux::handleMuxTCPInput(mbuf_t) received reset, closing 0x888ade70
    [13:48:10.0360] recv(9, 4) failed: connection closed
    [13:48:10.0360] unable to read message size: -1
    [13:48:10.0360] could not receive message
    [13:48:10.0360] client protocol version 13
    [13:48:10.0360] *** UUID 4B2AC217-7071-EC47-8945-EB5E2188BE49 ***
    [13:48:10.0360] Restore options:
    [13:48:10.0360]  UUID                           => <CFString 0x19315c0 [0x2f3ad0]>{contents = "4B2AC217-7071-EC47-8945-EB5E2188BE49"}
    [13:48:10.0360]  MinimumSystemPartition         => <CFNumber 0x1931510 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionSize            => <CFNumber 0x1930f50 [0x2f3ad0]>{value = +1660, type = kCFNumberSInt64Type}
    [13:48:10.0360]  SystemPartitionPadding         => <CFBasicHash 0x192f3c0 [0x2f3ad0]>{type = mutable dict, count = 5,
    [13:48:10.0360] entries =>
    [13:48:10.0360]  2 : <CFString 0x1931540 [0x2f3ad0]>{contents = "128"} = <CFNumber 0x1931570 [0x2f3ad0]>{value = +1280, type = kCFNumberSInt64Type}
    [13:48:10.0360]  3 : <CFString 0x1930f20 [0x2f3ad0]>{contents = "16"} = <CFNumber 0x192f3f0 [0x2f3ad0]>{value = +160, type = kCFNumberSInt64Type}
    [13:48:10.0360]  4 : <CFString 0x192ede0 [0x2f3ad0]>{contents = "32"} = <CFNumber 0x1931250 [0x2f3ad0]>{value = +320, type = kCFNumberSInt64Type}
    [13:48:10.0360]  5 : <CFString 0x1931960 [0x2f3ad0]>{contents = "8"} = <CFNumber 0x192ed50 [0x2f3ad0]>{value = +80, type = kCFNumberSInt64Type}
    [13:48:10.0360]  8 : <CFString 0x1931180 [0x2f3ad0]>{contents = "64"} = <CFNumber 0x1931950 [0x2f3ad0]>{value = +640, type = kCFNumberSInt64Type}
    [13:48:10.0360] }
    [13:48:10.0360]
    [13:48:10.0360] entering load_sep_os
    [13:48:10.0360] device has no sep
    [13:48:10.0360] entering partition_nand_device
    [13:48:10.0360] device supports boot-from-NAND
    [13:48:10.0360] nand device is already partitioned
    [13:48:10.0360] entering wait_for_storage_device
    [13:48:10.0360] Searching for NAND service
    [13:48:10.0360] Found NAND service: IOFlashStoragePartition
    [13:48:10.0360] NAND initialized. Waiting for devnode.
    [13:48:10.0360] entering clear_remap_variable
    [13:48:10.0360] executing /usr/sbin/nvram
    [13:48:10.0360] entering format_effaceable_storage
    [13:48:10.0360] effaceable storage is formatted, clearing it
    [13:48:10.0360] effaceable storaged cleared
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] AppleD1972PMUPowerSource: limiting USB input current to 390 mA (measured 462 mA)
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Sochi11D257.N42OS
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Sochi11D257.N42OS appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] entering check_for_restore_log
    [13:48:10.0360] found restore log (size = 28347)
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] error unmounting '/mnt2': Invalid argument
    [13:48:10.0360] entering clean_NAND
    [13:48:10.0360] NAND format complete
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0 system= data=
    [13:48:10.0360] entering format_storage_for_LwVM
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] unexpected partition 'LwVM' - skipping
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system= data=
    [13:48:10.0360] entering create_filesystem_partitions
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] system partition padding size is: 167772160 bytes
    [13:48:10.0360] unable to open : No such file or directory
    [13:48:10.0360] creating 2 partitions
    [13:48:10.0360] creating encrypted data partition
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] wipe entire partition: 1 (old = 0 new = 1820)
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] block size for /dev/disk0s1s2: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v Data -J -P /dev/disk0s1s2
    [13:48:10.0360] Initialized /dev/rdisk0s1s2 as a 13 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering mount_filesystems
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s2
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is Data
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume Data appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s2 mounted on /mnt2
    [13:48:10.0360] entering resize_system_partition_to_options
    [13:48:10.0360] User specified system partition size, skipping firmware extras size.
    [13:48:10.0360] Found SystemPartitionPadding value of 167772160 bytes
    [13:48:10.0360] Erasing system partition prior to resize operation.
    [13:48:10.0360] block size for /dev/disk0s1s1: 4096
    [13:48:10.0360] /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] executing /sbin/newfs_hfs -s -v System -J /dev/disk0s1s1
    [13:48:10.0360] Initialized /dev/rdisk0s1s1 as a 2 GB case-sensitive HFS Plus volume with a 8192k journal
    [13:48:10.0360] executing /sbin/fsck_hfs
    [13:48:10.0360] ** /dev/rdisk0s1s1
    [13:48:10.0360]    Executing fsck_hfs (version hfs-277.10.5).
    [13:48:10.0360] ** Checking Journaled HFS Plus volume.
    [13:48:10.0360] ** Detected a case-sensitive volume.
    [13:48:10.0360]    The volume name is System
    [13:48:10.0360] ** Checking extents overflow file.
    [13:48:10.0360] ** Checking catalog file.
    [13:48:10.0360] ** Checking multi-linked files.
    [13:48:10.0360] ** Checking catalog hierarchy.
    [13:48:10.0360] ** Checking extended attributes file.
    [13:48:10.0360] ** Checking volume bitmap.
    [13:48:10.0360] ** Checking volume information.
    [13:48:10.0360] ** Trimming unused blocks.
    [13:48:10.0360] ** The volume System appears to be OK.
    [13:48:10.0360] executing /sbin/mount_hfs
    [13:48:10.0360] mount_hfs: Could not create property for re-key environment check: No such file or directory
    [13:48:10.0360] /dev/disk0s1s1 mounted on /mnt1
    [13:48:10.0360] Trying to resize system partition to 1908408320 bytes aka 1820 MB
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:0 requiredSize=465920
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized the system partition
    [13:48:10.0360] entering maximize_data_partition
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=<<<<<IMEI>>>>>>6
    [13:48:10.0360] maximizing data partition to 13946060799 bytes
    [13:48:10.0360] entering adjust_partition_preflight
    [13:48:10.0360] partition:1 requiredSize=3404800
    [13:48:10.0360] no change in size
    [13:48:10.0360] Successfully resized data partition to consume free blocks
    [13:48:10.0360] The system partition now has a total HFS+ capacity of 1820 MB
    [13:48:10.0360] entering ramrod_probe_media
    [13:48:10.0360] device partitioning scheme is GPT
    [13:48:10.0360] find_filesystem_partitions: storage=/dev/disk0s1 system=/dev/disk0s1s1 data=/dev/disk0s1s2
    [13:48:10.0360] entering unmount_filesystems
    [13:48:10.0360] entering ramrod_ticket_update
    [13:48:10.0360] looking up root ticket hash
    [13:48:10.0360] device tree ticket-hash: <CFData 0x1930040 [0x2f3ad0]>{length = 20, capacity = 20, bytes = 0x<<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>}
    [13:48:10.0360] ticket_hash: <<<<<<<<<<<<<<<<<<UDID>>>>>>>>>>>>>>>>>>
    [13:48:10.0360] received valid ticket (2741 bytes)
    [13:48:10.0360] entering restore_images
    [13:48:10.0360] Successfully marked device node /dev/rdisk0s1s1 as static data
    [13:48:10.0360] executing /usr/sbin/asr -source asr://localhost:12345 -target /dev/disk0s1s1 -erase -noprompt --chunkchecksum --puppetstrings
    [13:48:10.0360] void AppleUSBDeviceMux::handleConnectResult(struct BulkUSBMuxSession *, errno_t) new session to port 12345 failed: 61
    [13:48:10.0360] void AppleUSBDeviceM

    Hello gamavranje,
    Thanks for using Apple Support Communities.
    The icons you're seeing on your iPhone indicate it is in recovery mode.  Please plug your iPhone into your computer, and restore it with iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Use iTunes to restore your iOS device to factory settings
    http://support.apple.com/kb/HT1414
    Take care,
    Alex H.

  • After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    After upgrading to Lion, Preview (5.2.2) appears to have lost the facility to run a slide show by using my mouse to click an icon in the visible menu bar, as I could in the previous version.  Can I retrieve that icon and thus that facility?

    Unfortunately not. Lion has made many adjustments to the previous system. Try opening your pdfs in keynote.

  • I lost my iphone in the dominican republic but I am technically still covered in the 90 day warranty can I have it replaced or will I have to buy a new one?

    I take my sim out of my phone so that I won't be tempted to make phone calls while abroad. I now have the issue of having lost my phone and not being able to find it with the "Find My Iphone". I am still technically under a 90 day warranty but can my phone be replaced or do I have to buy a new one?

    The warranty covers defects in manufacturing and workmanship. If your phone is not operating properly and has not been physically damaged, it will be replaced under warranty.
    The warranty is NOT insurance against theft or loss.
    You will have to purchase a new phone.

  • TS4268 Help! Probably you have never experienced this, but I have lost the ability to iMessage.  When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage."   It's not a huge deal, but people with iPhones can't t

    Help!
    Probably you have never experienced this, but I have lost the ability to iMessage.
    When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage." 
    It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
    Help!
    I think I have gone through every support option available, short of
    Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
    To solve a different problem, the folks at the store replaced my iPhone 4S.
    I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
    I would really appreciate any feedback...

    Help!
    Probably you have never experienced this, but I have lost the ability to iMessage.
    When I try to turn on iMessage, it tells me that "an error occurred while trying to turn on iMessage." 
    It's not a huge deal, but people with iPhones can't text me back unless they try to re-send after finding out that their message wasn't delivered.
    Help!
    I think I have gone through every support option available, short of
    Scheduling an appointment at the Genius Bar. But I have been to the store three times in the last three weeks.
    To solve a different problem, the folks at the store replaced my iPhone 4S.
    I came home and loaded my backup onto the new phone. Everything EXCEPT iMessage seems to be working great.
    I would really appreciate any feedback...

  • HT1386 I have a 30Gb Classic.  I have loaded many of my CD's onto ITunes in the past and due to a change of computer have lost the files.  When I now sync Ipod to ITunes will I lose the CD loaded music from my Ipod as it no longer appears in my ITun libra

    I have lost the computer library of tunes downloaded from CDs onto ITunes .  So when I sync my Ipod ( with all CD and Itune downloads) with ITunes library (only ITune downloads) will I lose the CDs held on my Classic IPod.  Thanks for your consideration.

    Likely. Copy them from the iPod to your computer by:
    Recovering your iTunes library from your iPod or iOS device: Apple Support Communities

  • TS1741 I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    I have lost the original remote for my Apple TV. I went to install it at my fiancés house, and cannot use the remote app on my ipad or iPhone. Can I still control the Apple TV with the apps?

    Welcome to the Apple Community.
    Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

  • Want to sell my iPod Mini but i have lost the CD and need to burn one

    Hi i want to sell my iPod Mini but i have lost the CD that it came with. Is there anyway that i can download what was on it and burn it onto a CD for the person who buys it? If that is possible i would appreciate if you could link me to what i would need to download for both the Windows and the Mac.
    Thanks

    That is correct, you do not need to give them any disk. They can download the iPod Updater (something they might not already have) and iTunes (might already have it), both more recent versions than came with the iPod, from iTunes.com.

  • Camera Roll is missing. I have lost the Camera Roll section in Photos. Any idea how I can restore Camera Roll .  Thanks!

    Camera Roll is missing. I have lost the Camera Roll section in Photos. Any idea how I can restore Camera Roll .  I am using an iPad 3 with OS 6.01 Thanks!

    Hi,
    Thanks for your help.
    I have discovered that Camera Roll reappeared when I took a pic using my iPad camera.
    Previously I had not done that. Stupid me.
    Your attempt to help me is much appreciated.
    Thanks.
    C.H.2

  • Since updating to Firefox 4.0.1 I have lost the site security ranking provided by Norton. can I incorporate this in the latest Firefox? Failing that, how can I return to my previous version?

    Since updating to Firefox 4.0.1 I have lost the site security ranking provided by Norton. can I incorporate this in the latest Firefox? Failing that, how can I return to my previous version?

    http://community.norton.com/t5/Norton-Internet-Security-Norton/Norton-Toolbar-not-compatible-with-FF-4-0-1/td-p/442788

  • I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4.

    I need to reinstall the system software on my older iMac. I have lost the system disks, though... so now what? It had 10.4. We moved, and I have looked everywhere. Am I doomed to find a way to buy it? Can taking it into the Apple Store fix it? Will it be expensive THERE? I've already saved all of the files I want off of it.... I just need it to work now.

    You've lost me on why you need to reinstall Tiger, when you already have all the files you wanted (which means Tiger worked perfectly fine). If you want to upgrade to Leopard, that's a different issue: your Mac needs to meet the minimum system requirements for that, which you can easily determine.
    If you just want to get a replacement set of Tiger install discs, you can try calling AppleCare and see if they're able to send you a replacement set, and if not, you'll have to buy a new set yourself. You can get them on eBay, Craigslist, and HardCore Mac (http://store.yahoo.com/hardcoremac/), although they sell it for ridiculous prices.
    < Edited by Host >

Maybe you are looking for