Qosmio F20-136 - Boot from USB Hard drive

Dear All,
Is it possible to enable the Qosmio F20-136 to boot from a second hard drive connected one of the USB ports? I know that you can hit F2 during the boot to get 4 different boot options, but this isn't one of them.
Thanks

Hello
As far as I know it is not possible and I didn?t find any topic where someone can confirm this possibility. Anyway it will be very nice if something like that can be possible.

Similar Messages

  • Won't boot from USB hard drive?

    Hi, all. My daughter has a brand-new Aluminum Macbook a week old, with all Apple software updates applied and everything running smoothly. She has a Seagate FreeAgent Go external USB 2.0 hard drive divided into two HFS+ Journaled partitions using the GUID partition scheme: a large partition on which to back up her internal drive, and a small partition for use as an emergency boot "disk." We've used the latest version of SuperDuper to make a bootable clone of her internal drive on the large backup partition, and I've just begun installing Leopard from her MacBook installer DVD onto the emergency boot partition as I write this (using my own computer). After 25 minutes, the installer DVD is still being "checked for consistency"; I hope things will finally begin to move along faster when the installation actually starts.
    We'll see what happens when that installation is done, but before I began it, I checked to make sure the SuperDuper clone on the backup partition would boot the MacBook. To my dismay, it did not, although I held down the Option key during startup, selected the backup partition in Startup Manager, and clicked the arrow to proceed with booting from that partition. The MacBook booted from its internal drive anyway.
    You'll note that I'm not a Leopard or Intel Mac user myself, so I'm not familiar with any issues that may be more familiar to regular users of that OS or of Intel Macs. Can anyone tell me whether SuperDuper has problems creating bootable USB clones that work in Leopard or on those machines? Is there something else I should be doing to boot from the clone we made, instead of using the Startup Manager? Any other thoughts on why this hasn't worked?

    I have noticed that the start-up disk appears just about anywhere except in the upper right-hand corner. I too, was convinced once that I was booted from the wrong drive. However, I have implicit faith in SD and since it has never let me down, I searched and found the boot drive hiding amongst some files littering my desktop.

  • IMac 24 Aluminum won't boot from USB Hard drive

    I just got an iMac 24 from the Apple Refurb store. It comes with Snow Leopard, but I need to install a Leopard partition for my wife to ensure 100% compatibility with Photoshop CS3, among other things. I created a partition just for Leopard, so that's good to go.
    I can choose the boot partition on my Leopard install drive when starting by holding the "alt" key, that's no problem. However, after I choose that USB drive, it reboots... over and over and over and over. To be sure it isn't the drive, I tested it with my Macbook Pro, and it booted up just fine. I tried another USB drive, same exact problem.
    I don't have a Firewire external that I can repartition for the purpose of installing Leopard. I only have it on hard drive. Then I tried making a DMG with disk utility and burning it to a DVD+R DL, but it tells me the disc isn't large enough, even though it's 8.5GB and the image is 7.6GB.
    Pulling my hair out here guys! Is this refurb a lemon?

    The Leopard install DVD I used to make the image is not available, it got stolen along with laptop bag it was in last Spring.
    Is it this "image" (clone) of the installation disc that you are trying to boot from a USB drive, or a full installation of Leopard? If it's a clone of the installation disc on a USB drive, there are a few considerations.
    First, what type was the original Leopard disc (the one you lost)? Was it a retail disc (the type sold separately in a box) or one that came with another Mac model, such as a MacBook Pro. If it's the disc from a MacBook Pro, it will not work because your iMac is a different model. Those included disc usually only work with the model it came with.
    If it's a retail disc, the other consideration is the version on the disc. If you look at that everymac.com profile page, it says that the (earlier) pre-installed version of Mac OS X is 10.5.6 (9G2030). If that retail Leopard disc was earlier than 10.5.6 (such as the original 10.5.0 disc), then it will not boot that iMac because, as I said in the first reply - +Macs can generally boot the version of Mac OS it came with, or LATER (up to hardware limits), but NOT earlier.+
    If that USB drive you are trying to boot the iMac from has a full installation of Leopard, please post back.

  • Why won't my iMac 27" boot from external hard drive?

    I have a new 27in Intel i5 dual core 3.6GHz iMac. It works wonderfully.
    My question is this. I have a Pleides Ice Cube external hard drive with a USB 2.0/Firewire enclosure with a 500GB hard drive. I used diskutility to format the hard drive as a GUID Partition Table. I then used SuperDuper to clone the iMac OS 10.6.7 and Apps over to it.
    I can select the external drive in System Preferences/Startup Disk to boot from, but when booting the iMac gets as far as the white screen then just stops loading.
    I have tried both the USB connection and the Firewire connection (with a Firewire 800 to 400 cable).
    I have run Disk Utility and repaired the disk and the preferences.
    I have used Disk Warrior to rebuild the directory as well, but the iMac will not boot from the drive.
    It does boot from the original DVD's and its own hard drive.
    My old 24" iMac had no trouble booting from this hard drive or any of the others I have collected over the years, so I am reluctant to think it is the external drive. It is something to do with this particular processor Snow Leopard and external drives.

    It sounds like something in the SuperDuper clone might not have copied well. To get the full answer on that I would check with Apple or SuperDuper to see if they support each other.
    As a quick test, if you restart and immediately press and hold "option" on your keyboard do you see your external HD as an option to boot from? If so, click it and see if the boot runs any differently, but if you don't see it at all that could show that the problem is more deep rooted.
    Personally, if looking in to either of those didn't give me any other info to go on, I would reformat and start the clone again. BTW, do you know for sure GUID Partition is the format you'd want to do this on? Generally macs use "Mac OS Extended" and some external HDs can use "FAT32" (if you want them to work well with Windows)
    Hope that gives a little direction
    Alex

  • HP Pavilion 500-210 QE Can't boot from any hard drive.

    Good Evening. As you can see from the subject, my computer just can't boot from any hard drive that I put on it. I tried swapping the power supply, the SATA cable, resetting the BIOS, enabling legacy boot, changing from AHCI to IDE and RAID... 
    When I get to the BIOS setup, I can see the hard drive and its specifications, but it just won't boot or show up when I'm trying to install a new OS. I'm not an expert, but I think the problem might be in the motherboard SATA ports, but I'm not sure. Just to make sure, I did try another hard drive and it didn't work aswell. 
    I was also thinking about buying an external hard drive and instaling my OS on that, but I don't even know if that's possible and I would really like to have my computer working again.
    Thank you for your attention!
    This question was solved.
    View Solution.

    What is the installed operating system?
    Did you make a recovery disk set?
    Did you happen to make a  Windows 8.1 startup disk or USB recovery thumbdrive?
    Have you tested the hard disk?
    Press the power button and then immediately tap the Esc key. In the Startup menu, choose F2 for Diagnostics. In the HP Basic System Diagnostics menu choose hard disk. Run the test and post the results here.
    The issue you are facing has nothing to do with the SATA ports. It is a configuration issue. Your PC is a modern one and its BIOS (UEFI) is far more advanced than what you may have seen before.
    If you want to install a different operating system then you will have to make a few changes in the BIOS configuration. Secure Boot is turned on by default for Windows 8 and Windows 8.1. If you try installing a different OS without turning this off then your system won't boot up. You may be running into this if you are trying to install another operating system.
    The image below is  what will be seen in the BIOS of your PC in the security tab --> . In the secure boot configuration options do not clear the secure boot keys! Those keys are your operating system license activation keys.
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

  • Booting from external hard drive on intel-based MacBook Pro

    Good day everyone. I know similar questions were raised in this community, but I still have some questions.
    I have MacBook Pro(late 2011) with OS X 10.7.5 and external hard drive with Ubuntu 13.04, from wich i can boot succefully on my PC. But MacBook Pro will not boot from my external drive, no matter which key/combination i use during restart.
    After googling I found some answers to my initial question, how to boot from external hard drive
    https://discussions.apple.com/thread/1852633?start=0&tstart=0
    http://www.everymac.com/systems/apple/macbook_pro/faq/macbook-pro-boot-from-exte rnal-firewire-or-usb-drive.html
    http://support.apple.com/kb/ht1948
    As I understand I need to format my external hard drive into GUID partition type and this will be enough to be able to boot from it on my mac?
    With this new partition type, will I be able to install ubuntu again on my external drive?
    Does GUID partition type supports NTFS, ext4 and FAT32, linux swap?(I use ntfs for big files, ext4 as partition for ubuntu and fat32, because i use windows, linux and osx)
    Will I be able to boot from my pc from my external drive with this new partition type?
    What are downsides, if any, to GPT?
    here is info on my e-drive

    LowLuster wrote:
    The only OS that will boot from an external drive is Mac OS X or maybe Linux. For OS X to be installed on any drive it need to be formatted Mac OS Extended and have GUID partition table.
    As for Linux I'm not that familiar with it but again for a Mac to boot it need an EFI partition on the drive and I don't think that is possible with NTFS or FAT32 let alone the native Linux format.
    Went to wiki to learn more on efi but found artice on uefi.
    Operating system loaders are a class of the UEFI applications. As such, they are stored as files on a file system that can be accessed by the firmware, called EFI System partition (ESP). Supported file systems include FAT32, FAT16 and FAT12, and supported partition table scheme is GPT only. UEFI does not rely on a boot sector, although ESP provides space for it as part of the backwards compatibility.[26]
    Here is FAQ on official uefi website.
    Can UEFI Secure Boot be adopted and implemented by a variety of operating systems?
    UEFI specifications are platform-independent, supporting multiple platforms and architectures. In addition, UEFI specifications are designed to promote cross-functionality, as well as to support broad adoption across multiple operating systems, including Windows as well as Linux-based operating systems. The specifications are robust and can potentially complement—or even advance—other distributions, such as Linux-based distributions.
    And here is wiki article on GPT expaining OS support.
    It is obvious both uefi and GPT are ok with Linux and file systems such as FAT32, ext4 and NTFS.
    I guess there is no much difference(or is that the same thing?) between uefi and efi used in Macs.
    In your answer to Stark Industries you said that mac can boot linux from external hard drive, well this is not the info i got of official website and it is still my question, because your answer is very inconclusive and your info is partially incorrect

  • Set Bios to Boot from 2nd Hard Drive

    Hello HP forum!
    I have a situation that I am afraid may be hardware related, so this is my last attempt for help before I let it go.
    In this laptop, I have two hard drive slots with two hard drives. The second hard drive was used as an HP backup/restore drive as shipped from the factory.
    I would like to format and install an OS onto the 2nd drive for easy-peesy dual booting. (This is a work computer, so easy + time-efficient + low-risk is optimal). I have actually done this already, but the BIOS does not seem to detect two bootable hard drives. In the BIOS (pretty sure not EFI) boot list, it simply shows the option to boot from "Notebook Hard Drive", which boots from the 1st drive.
    In my 1st Drive's Windows 7, I can read the contents of the 2nd disk, so it is definitely functional. Also, replacing the 1st drive with the 2nd drive, I can successfully boot from it, so it is bootable. This seems to imply that my hardware understands that there are two drives, but the BIOS does not recognize that port to be a bootable option, but only a storage option... I guess?
    My question is, then, how can I set up my computer to give me the option to boot from either drive? Is it even possible on this hardware?
    Thanks
    Rex

    Did you make sure to update your bios as that could be something that might require a bios update? Also if you can't see or locate that second drive in the BIOS you might not have the option to boot from the second drive? Does the bios also give you the option to boot from the cd drive? Your asking us to see a boot bios screen and unless some has your same make/model no everyone will be able to confirm or see what your asking so unless you can do more looking at all your bios options you might not have the option to boot from the second drive port.
    I am a Volunteer to help others on here-not a HP employee.
    Replies aren't online 24/7 because of Time Zone differences.
    Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

  • How to boot from USB flash drive - Portege R500

    Hi,
    I have a Portege R500 running Windows XP, brought about 2 years ago, and recently contracted a worm virus that has infected some of the start up files as the minute I log in it logs out again, even in safe mode! Quickest way I can think of sorting it is to reformat it with the XP recovery disc and reinstall windows.
    Problem!! The CD/DVD drive on the laptop stopped working a while ago, have tried pretty much everything in the thread on this site but had no luck.
    So my plan was to boot from a USB flash drive and do it that way. However in the boot settings I only have the options of HDD / FDD / CD-ROM / LAN, neither of these will work. Does anyone know how to boot from USB flash drives?
    Any help would be really appreciated

    Hi
    As far as I know it should be possible to boot from USB FDD
    Im not sure if you would be able to boot from USB flash drive but its definitely worth a try
    Generally you could try to press F12 button when notebook powers up.
    Then a boot menu should appear on the display and you should see all bootable devices.
    PS: As far as I know the USB booting was available in ToshibaHWSetup (Toshiba tool which changes the BIOS settings in windows OS.) Therefore I assume booting from USB should be possible.
    Greets

  • Booting from external hard drive USB 2.0

    I have an iBook G4 collecting dust in my garage because the internal hard drive is dead.  I want to give it to my cousin just to surf the web so I took it to the genius bar and they were able to boot it from an external hd.  Yesterday I purchased a 250 GB WD Passport external hd for $29 at Target.  I was able to partition and format the hd from my MacBook Pro and have it PowerPC ready.  Finally I was successful in installing Mac OS X Tiger onto it.  Now that I am trying to boot from it on the iBook G4, I get nothing but the blinking folder with the question mark.
    I have searched the forums and most people are quick to respond with the answer that a firewire hd is the only way to boot but I am hoping there is SOME other way around it, even if it means a lot of extra steps.  Any help will be greatly appreciated.  Thanks!

    As Kappy says, while a few PowerPC Macs can boot from USB, I don't think that capability exists for an iBook.
    http://support.apple.com/kb/TA25908
    Note on the Apple Knowledge Base article:
    Products Affected
    Power Mac, iMac

  • Hard drive dead/Boot from external hard drive?

    My hard drive failed and I need a new one. For the time being, I'd prefer not to open up my iMac and replace the internal hard drive. I have an external USB hard drive and I cannot install OSX onto this drive (strangely, it takes the first disc but not the second).
    Is it possible to boot and run an iMac G5 from an external hard drive? If so, what is required for hardware and what steps need to be taken?
    If not, what course of action would you recommend?

    It is very easy to boot an iMac from an external drive, but the drive should be a Firewire drive. Get one, then get SuperDuper!, which will enable you to clone your data and system to it. You can then choose the external firewire as your boot drive and operate without any problems.
    Apparently, there are ways to boot from a USB drive, but they are complicated and a firewire drive is very straightforward and fast.
    Let us know how you make out,

  • Lion won't run from usb hard drive

    I downloaded Lion yesterday.  Took 7 hours, from 5:30pm to 12:30am.  I bought a new 500GB USB hard drive to load it on.  I had previously upgraded the SL OSX per instructions.  The Lion install went fine.  It told me to reformat the drive, which I did (to get rid of MS-DOS formatting).  The Lion installer recognized the drive and went through a 20 minute install.
    Upon restart, it defaulted to SL on my internal drive.  I went to Preferences/Startup Disk and clicked on the "Mac OSX 10.7 on 500G HD" and clicked Restart.  Again, it defaulted to my internal SL drive.
    I restarted the computer and held down the Option key to pick a boot drive.  When the window appeared, the external drive was not in the list, only the internal SL drive and the Windows partition for Parallels.
    Repeating the above gets the same results.
    I understand that the Lion installer is now gone and I can't install it again.
    What do I do now? 

    The new hard drive is a Hitachi Lifestudio and it has one of those annoying "disks" that pop up on the screen wanting you to install some "Lifestudio" app.  Erasing the disk and reformatting does not stop that message, so it must be in hardware.
    It is.  Return it for a refund and get the below.
    I ALWAYS build my own drive (takes 5 mins). More storage and less money.
    Use FireWire not USB.
    USB is packet oriented and data transfer is managed by the CPU, Firewire is a streaming protocol and data transfer is managed by the CPU only to initiate transfer, after that, Firewire handles the rest dropping CPU load to nearly 0%.
    Put the drive below, in the enclosure at the bottom. Note how the enclosure has a cooling fan, and that the drive is mounted on vibration mounts. I know of no other hard drive enclosure with those features.
    A hard drive has three enemies 1) Heat, 2) Vibration, 3) A Windows 7 installation.
    http://www.amazon.com/Western-Digital-Intellipower-Desktop-WD20EADS/dp/B001RB1TI S/ref=sr_1_1?ie=UTF8&s=electronics&qid=1258862242&sr=8-1
    http://www.cooldrives.com/ox93saiihadr.html

  • My PB G4 won't boot from any hard drive..stucked in apple icon..

    At first, it didn't boot from the internal hard drive...
    I could see the apple icon with grey background, but the little runing icon under apple icon didn't appear. There is no sound from the hard drive either...
    I tried removing and replacing the RAM, didn't work either...
    I have the powerbook CD with apple hardware test, I ran it. It went though a detail test and showed no errors or problems....
    And then I tried to start up from the powerbook CD, it works and I was able to go to disk utility. However, I cannot complete verifying disk permission because of a lot of problem, sometimes it said "communication error with disk manager" and sometimes it got frozen and sometimes it just simply stop moving (not frozen, but just not moving, the disk is quite also too).
    then I tried to boot from my USB external hard drive, I had my backup in it. However, it is the same as booting from internal drive, no running icon below the apple icon. Also, the external hard drive did not make any sound.
    I have never experienced this problem... please help...

    Have you added any hardware or new software recently?
    Have you tried a safe boot? Hold the shift key while you boot - this does some disk maintenance and doesn't load login items. If this works, try booting normally.
    If you can't run Disk Utility verify permissions from the OS X CD did you also try to verify or repair the disk? If this won't work due to errors, you may want to consider a program like Disk Warrior to attempt to repair the hard drive. You can find it at http://www.alsoft.com/DiskWarrior/

  • Mac mini 2014 - boot from usb key/drive

    Hi,
    I've just unpacked the latest mac mini, bought two days ago.
    I am trying to get it to boot of a bootable usb key, bootable usb hard drive and PXE server to install another OS.
    All methods failing so far; I always get into OSX. I've tested the PXE server with another client and this was working just fine.
    Any hint for me please? (besides buying an external cdrom)
    Thanks.

    Thanks Gary. Given your confirmation that it should be possible, I've taken the fact that the external drive doesn't appear as a choice in "startup disk" as an indication that my disk is the issue. I did try two alternatives method to get the .iso to disk given your hint,
    The first, using UNetbootin rather than my linux distribution and it does come back with a message rather specific after it finishes:  "The created USB device will not boot off a Mac.  Insert it into a PC, and select the USB boot option in the BIOS boot menu".
    The second, using Disk Utility but the restore section for the target volume doesn't seems interested in me dragging the .iso to the 'source' field.
    And that's with two different OS's .iso. so assuming that's not the right alternative either.
    Few questions from there if I may,
    Is there anything special I should take care off while doing the formatting to boot from a mac (mini)?  (I'd welcome any link to a validated method)
    what do you do when you have a non mac keyboard? (I had used "C")
    should the PXE method have worked as well on the mac mini?
    (Thanks again for that first response Gary)

  • OS booting from External Hard drive

    So I have searched high and low and I cannot figure out if the Toshiba Satillite's are able to boot an OS off an external Hard drive. I have found out that there are laptops that can do that but their BIOS must beable to do it. If Toshiba notebooks can do this which ones can?

    Hi
    some models now are able to boot from USB stick.
    I don't know if it is possible to make theese models also boot from an USB HDD.
    The models are right now: Tecra A6, A7, M4, M5, S3
    Other models might also support this.
    Then there is the possibility to add a 2nd HDD to certain Toshiba-models and boot from that drive. The models that support this are many.
    Tecra 9000, 9100, M1, M2, M3, M4, M5, SatPro 6000, 6100, M10.
    BR
    Tom

  • Win7 can't boot in USB hard drive blue screen 7b error,but can boot when use PD8

    Install Win7 64bit in a USB hard drive through some tools,when start windows the microsoft logo appear,get blue screen.
    ***stop:0x0000007B(0x80786B58,0xC0000034,0x00000000,0x00000000)
    problem has been detected and windows has been shut down to prevent  damage to your computer.If  this is the first you've seen this stop  error screen restart your computer .If this screen appears again.follow these steps:Check for viruses on  your computer.Remove any newly hard drives or hard drive  controllers.Check your hard drive to make sure it is  properly.Configured and terminated.Run DCHKDSK/F to check for hard  drive corrption,and then restart your computer.
    Technical:
    ***stop:0x0000007B(0x80786B58,0xC0000034,0x00000000,0x00000000)
    But when use Parallels Desktop 8 My boot camp ,the win7 can boot normally.
    Any solution?
    Thank you.

    Hi,
    If this issue is related with firmare, then it's recommend to contact the vender\manufacture, if you got any update of this issue, we'd be appreciate that you could share your experience with us.
    Regards
    Yolanda Zhu
    TechNet Community Support

Maybe you are looking for