Qosmio F20-141 - Cannot start Win XP PRO SP2 installation.

Cannot start Win XP PRO SP2 installation.
After choose "start from CD" i can see for a little time only starting message ~"Starting Wisdows XP installation" (little white letters on top of black screen)
After this computer hungs in black screen.
QOSMIO F20-141 for Russian Federation
M/N: PQF20E-02801YRU

Hi again
You should try to start the OS installation with Recovery CD and/or with the Windows XP CD. If this both procedures doesnt work so I assume there is something wrong with the hardware. Maybe a faulty HDD. In this case the best way to solve this issue is to contact the ASP

Similar Messages

URGENT Cannot install Ora9i rel 2 Client on Win XP Pro SP2

Hi folks:
I have a problem installing Oracle 9i in a "clean" machine with Win XP Pro SP2 with .NET 1.1 running on a P4@3GHz and 512MBytes of RAM and 30GBytes of HD free, when I start de UOI only appear de Oracle's splash screen and when I select install/Deinstall products, nothing happens (in the administrator task appear not response and close automatically).
I read a lot of solutions about this here, always the same result, NOTHING.
- I rename symcjit.dll to symcjit.old (of course i copied the installation CD at the oracle subdirectory to avoid long directory paths)
- Install a JDK 1.3 and 1.4 (and deinstall them after and clean the registry)
- I login on windows with a user name without rare characters.
After trying all above and more that I've forgotten I try install a older version (8.1.7) but appear this message.
"There was a problem opening the staging area. Please make sure the 'Source' you have specified is valid"
of course the source is valid (products.jar) and I edited the oraparam.ini file to change the relative paths to absolute, but the same message appear.
Â¿I'm doing something wrong?Â¿incompatibilites between Oracle and Windows?
Thanks for any help, I need to resolve this problem ASAP!

Could it be a firewall blocking a port that Oracle needs?
Service Pack 2 for Microsoft Windows XP turns on the firewall by default.
Unless, there is a conflict somewhere with the installation program and what you already have installed. Such as, do you have a version of some Oracle software already installed?
Could it be a conflict with the Java runtime? The Oracle Universal Installer uses its own Java VM.
Have you tried downloading the latest client software for Oracle 9.2 and trying that?

TS1367 I cannot start my Macbook Pro!

As the title says, I cannot start my Macbook Pro.
I turned the Macbook on, I heard the startup chime, but stays grey and all I see is the spinning wheel (the one that indicates something is loading).
What can I do for it? Thanks in advance.

Do a safe boot pressing Shift key. If you can, boot in recovery with Command and R keys and reinstall 10.7

I cannot start my MacBook Pro 15" even after many try's.

I cannot start my MacBook Pro 15" even after many try's. Could it be due to not ejecting my external hard drive, or have just installed the airport express. Urgent help would be appreciated.

Run throught this list of fixes
..Step by Step to fix your Mac

WRT350N + WMP300N = BSOD Crash on Win XP Pro SP2?

Yes, the problem I am having is that with WRT350N + Wireless + WMP300N = BSOD Crash on Win XP Pro SP2.   Really, from what I can tell, WRT350N + Wireless = BSOD Crash on Win XP Pro SP2.   Yes, I know, a router shouldn't be able to crash a computer, PC drivers, PC misconfigurations do.
However, my crashes didn't start happening until I switched to my WRT350N wireless router. Actually, at that time I didn't even have the linksys WMP300N ... it was another wireless card. Now I have the linksys WMP300N, and the crashes still happen.
I updated my driver on my NIC to the latest version two days ago, and at the same time upgraded the firmware on the router to the latest and greatest. You know what that did? Instead of crashing my PC once every day or so I get crashes about 5 mins after I start my PC.
I've tried using the linksys wireless configuration utility, and the Windows zero configuration, still crashes. I've tried Wireless Mixed bode, BG mixed, G only, still crashes.   Different channels, still crashes.   I disabled Symantec Client Security firewall, still crashes. Uninstalled SCS and used windows firewall, still crashes.   Disabled netbios and dynamic DNS registration on my adapter, still crashes.   Disabled wireless QoS on PC and router, still crashes. Tried disabling and enabling (individually) Wireless AP isolation, frame burst, CTS Protection mode, forced 54mbps rate ... still crashes. I have no HD attached to the router. I've disabled UPnP on the router, still crashes.
You know what does fix the crashes? Disabling my wireless adapter. You know what else fixes the crashes?   Connecting to a different wireless router.
I'm completely baffled. Any ideas what I can try? I'm an IT Consultant by trade, and have been working with PCs and networking in a professional capacity for over 8 years, so I have a decent amount of troubleshooting experience.   The BSOD doesn't say much, just equates to a hardware/driver fault ... but no indication what.   My crash dump analysis (full, not just minidump) also provides no data as to what driver).
Thoughts? As much as I hated my former Netgear, I'm about ready to even go back to that....
Edit: My PC is using DHCP, configured as a reserved address.
Message Edited by TroyL on 02-20-2008 07:08 AM

Hello, hopefully I can help you. Some things that resolved my issue were disabling some options in the advanced properties of my NIC (WMP300N) Even if you don't have the same NIC, you should probably have some similar options:
-Manage Wireless Settings = Disabled (note: I disabled this since I'm using Windows to manage the settings)
-Mixed Cell Support = Disabled
-Minimum Power Consumption = Disabled
-Power Save Mode = Disabled
-Wake Up Capabilities = None
-Bluetooth Collaboration = Disabled
-40MHz Intolerant = Disabled
Try disabling those things, and go from there ... good luck . With those settings, I haven't crashed in several months now. I don't know which setting it was fixed it, I haven't been brave enough to go playing with it again ... if it ain't broke, don't fix it, lol.

Problem installing Win XP Pro SP2 on 2008 Mac Pro running 10.6.8

Okay, I have never setup or ran a bootcamp partition so I apologize in advance for my ignorance on the subject. I have been attempting to install win xp pro (SP2). I am using the Boot Camp Assistant v3.0.4. I have created a 32GB FAT32 partition and at the point I click Continue Installation (with the XP Pro disc in the drive) the computer reboots to supposedly install.
What happens instead is I get a revolving censorship/ban circle icon, folder with question mark and apple logo. It just continuously will flash between those 3 icons until I restart.
Here's what I've tried...
-removing all other drives. I'm attempting to install on the boot drive which is in bay 1.
-removed all external devices only things plugged in are my usb keyboard and DVI monitor
-deleting and recreating the partition
-I have the xp pro cd in the top drive and the snow leopard cd in the bottom drive (both internal cd/dvd drives)
Computer:
Model Name:          Mac Pro
Model Identifier:          MacPro2,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          3 GHz
Number Of Processors:          2
Total Number Of Cores:          8
L2 Cache (per processor):          8 MB
Memory:          10 GB
Bus Speed:          1.33 GHz
Boot ROM Version:          MP21.007F.B06
SMC Version (system):          1.15f3
No matter what I try I am met with the same results. I have held down the option key and manually selected the windows xp cd. It seems to be booting but immediately turns off my DVI monitor which, well, makes it impossible for me to actually know what is happening. I do have a nvidia GeForce 8800 which only has two DVI ports off the back. I do have the adapter and an old VGA monitor I could pull out of the attic but would rather not unless that is my only option. Can someone in the community please point me in the right direction?
Many, many, many thanks!
Curtis
OKC, OK

Update: my problem was solved by getting my VGA monitor out of the attic. Once windows was done and I ran the setup.exe off the Snow Leopard CD, all of the drivers were updated to allow me to switch back over to my apple cinema display.
Also, I did need to hold down the option key to select the windows CD to install...and again to select the windows partition to boot but so far everything is going well with Bootcamp 3.0.4 and XP SP2...other than it is windows.
-Curtis

PC54G and MP54G2 in Win XP Pro SP2

Hello, and thank you for reading my thread.
I've got a MSI Mega 180 with a integrated MP54G2. In can see the Ethernet-Card in the "Device Manager", but it won't work. I've tried with the driver that comes along with the original package, and the newest that MSI offers on the web-sites. The files that can be downloaded, seems to be se same for PC54G and MP54G2; "MSI_WLAN_Software4.1.16.26.zip". I can't get this driver to work for the MP54G2 nor the PC54G. The reason why I'm talking about the PC54G is that I had that card from another PC, but the result when I install it into the Barebone is the same. Is there a known problem with this driver in SP2?
- Eirik

I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd. The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR. The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd. They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...) Really confused !!! Tried in different PCI slots. Do you think it's a card or chips (physically) problem, at your advice ? I'm not at my first computer installation, and it's the first time I see this problem. I'm in computers since 6 years and never seen that before. Help me please...........

[TV@Plus] Can't install drivers in win XP pro sp2

I can't install the drivers of that tv@nywhere plus. I tried it on different computers = same results. Tried the msi driver on web site = same results. I have the following message " The tv@nywhere WDM Driver Installation Failed ". Is it the card or what ? Sent an email to MSI = no answer. Do I have to return it and buy a better card (not from MSI)....Tried in 4 different computers....HELP ME SOMEONE !!!

I tried it on a P4 3.2 ghz, ATI Radeon 9600 128 megs, Gigabyte Motherboard (don't remember wich one), over 256 megs DDR, 160 gigs hdd. The second one was a Athlon XP 2200+, Ati Radeon 9250 128 megs, Gigabyte Motherboard GA-7VKMP, 80 gigs hdd, 512 megs DDR. The third one is a P3 866, Ati rage Pro, Intel motherboard, 384 megs SDram, 40 gigs hdd. They're all new installed win xp pro SP2 computers (after updates everywhere ex:graphic cards, windows etc...) Really confused !!! Tried in different PCI slots. Do you think it's a card or chips (physically) problem, at your advice ? I'm not at my first computer installation, and it's the first time I see this problem. I'm in computers since 6 years and never seen that before. Help me please...........

I cannot start my MacBook Pro. What can I do?

Hello guys,
since today I have problems with my MacBook Pro, which I bought in May 2012. I cannot start my Mac. When I push the On-button the apple logo appears as normal but nothing more happens. Sometimes I can also logg me in, but the Mac cannot start and boot up. I don´t know whats the problem, yesterday it worked normally but then I installed a new Itunes version and let it load overnight. Today this problem appeared. What can I do?
I hope somebody can help me.
Greetings from Germany
Jenni

Grey Screen and spinning wheel at startup
http://support.apple.com/kb/PH11044
Repair Disk
Steps 2 through 8
http://support.apple.com/kb/PH5836
Reinstall OS X
http://support.apple.com/kb/PH10763?viewlocale=en_US
Additional Steps
http://support.apple.com/kb/PH10929

TouchSmart 300 Blue screening after Win 7 Pro 32bit Installation

I have just installed Win 7 Pro 32bit as a clean install and now the PC is blue screening and will not boot. I have tried reinstallation several times and same thing. I am installing from a Win PE bootable memory stick. The source is fine as I have checked on another PC (different model). Any ideas?

Hi CamdenMatt,
I see a few things that are going to be problems for you:
1) Your PC is 64bit and you are installing a 32bit version of the OS (likely why you're not able to boot).
2) When you install a new version of Windows over the one that came pre-installed, you will lose all of the TouchSmart software and HP software and drivers that was installed and used to make the hardware function properly.
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

K9N6PGM2-V, Win XP Pro/SP2, USB only works at USB-1 speed

Apologies is this is on an FAQ somewhere -- I did look, but didn't see it. Anyway, the USB ports work fine at USB-1 speed, but not at USB 2.0 speed. In fact, MS XP reports that there are no USB 2.0 devices available. Kinda frustrating, since the MSI manual specifically mentions USB 2.0 pin headers for this motherboard.
The PC (see signature) is built from scratch. At this point, the only software that is on it is XP Pro, SP2, and downloaded MSI drivers, and the only hardware added is the Intel Ethernet card. I installed the full package of drivers from this web page:
http://global.msi.eu/index.php?func=downloaddetail&type=driver&maincat_no=1&prod_no=1472
Specifically, I downloaded the full set ("NVIDIA_MCP61_SYSTEM_MB.zip") and installed everything except "forceware network access manager.".
One other note -- When I installed the motherboard, I connected the front panel USB connectors to the motherboard's JUSB1 connector (should I have hooked it to JUSB2?) ... however, the same behavior (USB1 speed only) happens with the built-in connectors (next to keyboard/mouse input, etc.)
Can anyone help? Thanks.
Phil

>>If you are having problems with USB ports, read this topic.<<

Cannot start Wine on OSX Mountain Lion

So I don't want to bootcamp my mac because I don't use windows anymore. I deicded to use wine. However, everytime I try to start it, I get this error in code
/Users/menelikcannady/Movies/RAR\ Extractor\ Free/Tribute_Edition/Tribute_Edition.app/Contents/MacOS/startwine ; exit;
-bash: /Users/menelikcannady/Movies/RAR Extractor Free/Tribute_Edition/Tribute_Edition.app/Contents/MacOS/startwine: /bin/bash: bad interpreter: Operation not permitted
logout
What is the "bad interpreter"? And also, is Wine defaultly blocked in terminal? If so, how can I unblock it?

This is the Boot Camp forum. Why don't you ask about wine on a wine site?

Cannot start up Macbook Pro

I have a Macbook Pro that won't start up. It is running Lion with latest updates. I've inserted the install disk and run utiliies repair disk several times and each one returning a disk OK. It still will not start up. The screen lights, the apple apears, the wheel just keeps on spinning.
I've tried a couple of times trying to start up in safe mode A status bar appears under the spinning wheel and goes about half way but 30 minutes later there is still no progress. Any help is greatly appreciated.

I'm trying to find the answer to a similiar question. Here's my thread.
https://discussions.apple.com/thread/3549995

SC10-3s Cannot Start Win 7

Hello all,
I have a IdeaPad S10-3c, the problem that I have with this netbook is that every time that it boot up it goes to Win 7
Startup repair, and it will try to repair the problem but stated that it cannot repair the problem. When I check the problem detail I got the following info :-
Problem Signature:
Problem Event Name: StartupRepairOffline
Problem Signature 01: 6.1.7600.16385
Problem Signature 02: 6.1.7600.16385
Problem Signature 03: unknown
Problem Signature 04: 21201378
Problem Signature 05: AutoFailover
Problem Signature 06: 45
Problem Signature 07: BadPatch
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
After that I go to the Advance option and got to the System Recovery Option, Where I got the following option
1. Startup Repair
2. System Restore
3. System Image Recovery
4. Windows Memory Diagostic
5. Command Prompt
I have try the Startup repair but get the same result as the above problem, I try the System restore, still got the same problem. After restore to an earlier point in time, when reboot it goes back to the Startup repair and got the same
above result problem. I haven't try the system Image recover cos I haven't made any system image yet. Does anyboay have make a system image cd, and can let me have a copy ?. Do lenovo have this netbook system recovery / restore cd ?
I also try the command Prompt, have seen a few partition, including a windows setup x:\ drive, but when I run the setup it ask for a driver, and cannot find one. I'm not sure what driver it ask for.
Anybody here can help me solve the problem ? Where can I get a recovery / restore cd or a system image cd
Regards
Din

Hello izauddin and welcome to community,
If your netbook came with pre-installed Operating System then you can run OneKey Recovery and restore the system to factory default.
To run OneKey Recovery you need to power off the netbook and press Nova key ( rescue ) instead of power button.
You may share the netbook serial number via private message so the details can be confirm related to Operating System.
Best Regards,
Tanuj
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Qosmio G30 -190 cannot start-up

I have the computer Qosmio G30 -190 Model No. PQG30E-039023FR
There is often a blue screen appears tell me that there is an erros on the systeme
I tried to restore from the CD restoration TOSHIBA; but after creating the image of the software and eject the restoration CD, the Qosmio shutdown automatically. And when I restart it; that tell me errors of Windows, software is not installed try to install it again.
I change the memory to see if that is the problem but something happend
Let me know if you can help me solve those problems, thank you in advance for your help.
Ayaovi

What do you mean "Shutdown automatically"? Did the machine power off instantly? Or did Windows Shut down by itself?
If it shut down instantly, then it could be dust buildup in the heatsink causing it to overheat.
You should test the RAM before reinstalling Windows. You can download the bootable Memtest CD ISO from www.memtest.org

Qosmio F20-141 - Cannot start Win XP PRO SP2 installation.

Similar Messages

Maybe you are looking for