Qosmio F30-112: Cannot install Virtual Sound for Vista

Installed Windows Vista, downloaded sigma sound drivers ver. 6.10.5462.0 and installed them, then tried to install Virtual Sound and got message "Toshiba Virtual Sound does not support your computer." Where is the problem?

Toshiba European driver page for Vista gives me this (http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action=search&selCategory=2&selFamily=381&selSerie s=170&selProduct=652&selOS=26&selType=all&country= all&language=13&search=).
Virtual sound is listed there. I tried to install Virtual sound ver. 10317, 6.10.5462.0 is the version of Sound driver.

Similar Messages

Equium A110-276: Cannot install virtual sound for Windows Vista

When i'm on xp, i got a toshiba virtual sound. when i've installed vista, i can't install the toshiba virtual sound. it says "virtual sound doesn't support your computer". anyone know why? the toshiba virtual sound i'm installing came from toshiba value added package for vista.

I have downloaded the value added package but there is no virtual sound.
If the Toshiba value added package does not include the virtual sound then there is no much to do
By the way: did you select the right unit? Your notebook should is a part of the PSAB2E series.
Be sure you have downloaded the software for the right notebook

Qosmio F30-140: Cannot install Windows OS - No HDD

I've bought Qosmio F30-140 and I can't install winXP from my original cd:/ The recovery cd works great but it installs a lot of stuff I don't need so I want a clean install....
so when I run my winXP cd setup I get error message: "setup did not find any hard disk drives installed in your computer"...
though I can run windows normally which is installed from the recovery cd... I think it's something with hdd drivers.
How can I overcome this? Thanx in advance:)

Hi Sarunas
Its nothing wrong! Nothing with HDD or another hardware!
You have simply not installed the RAID driver
The Toshiba recovery CD contains the RAID driver and therefore you can install it without any problems.
But the Windows CD does not contain such driver and therefore the RAID driver must be installed at the beginning of the Windows installation setup procedure.
Windows will ask you for 3rd party RAID driver. The RAID driver you can find on the Toshiba driver page. Download it on the FDD and connect the external USB FDD drive.
From there you will be able to install the RAID driver.
Good luck..
PS: Search in this forum for similar postings... you will find a lot of threads about this theme...

Need USB drivers for Qosmio F30-112

plz.... I need USB driver for Qosmio F30-112
coz USB does not work properly

Hi mate,
your description is really, really short. Could you please describe more detailed WHY ITS NOT WORKING and what you have attached at your USB-ports.
I ask it, because USB under XP/Vista does not need any drivers. By the way ,which operating system is installed on your machine?
Greetings

Qosmio F30-112 Drivers for linux

Hi,
I need help. I have Qosmio F30 - 112 and I have linux on my pc. I need drivers for the graphic card.
Thank You

Hi Coz_64,
I agree with the user above. Toshiba doesnt support linux on their computers so you have to search yourself for drivers. You should ask in Linux forum
The most users here are using preinstalled Windows version
Check also this article:
[Do you know some useful website for Linux support on PC? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

Qosmio F30-112 - no drivers to download

hi
why the drivers no longer available for qosmio f30-112 ?
thanks.

Hey,
You can find the drivers here:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
Then select the following items:
*Archive* > Qosmio > Qosmio F Series > Qosmio F30
Check this :)

Qosmio F30-112 - How to reset the BIOS password

Hello
I get broken laptop Qosmio F30 -112 with broken lcd.
Now I get new lcd monitor and fix it but I can not access to bios password.
I found out how to recover passwords for other tips of toshiba laptops but I can not find for this.
What I looking is name of "jumper" that will reset my bios password.
I was carrying a laptop in a local service but they did not know to remove the problem.
Please help !!!
Best regards,
Antonio

Hello
Please visit http://eu.computers.toshiba-europe.com/innovation/generic/ASP_SUPPORT/ and there you will find authorized service providers for your country. Make a call and check what can be done about that.

Qosmio F30-112 - system memory upgrade

Hi all
is Qosmio F30-112 compatible with (2+2) GB 667Mhz memory system?

Did you check your user manual which was preinstalled on your notebook?
Usually such info is placed there!
The compatible modules are DDR2 533MHz (PC2-4200) 200-PIN SODIMM.
You could also use the 667Mhz but if your FSB (front side bus) supports only 553Mhz then your 667Mhz modules would run only at 533Mhz

Cannot install latest updates for Bridge and Photoshop CC. Get the following message: Update Failed. The download appears corrupted. U43M1D207.

Cannot install latest updates for Bridge and Photoshop CC. I get the following message: "Update Failed. The download appears corrupted. U43M1D207."
I have tried to install at different times over three different days with the same result each time. My version of Bridge now no longer shows DNG files except as an icon. The update is supposed to install Camera Raw version 9.

I had the 204 version of your error using the direct download links proved on this thread solved my problem.. hope you have same success... had to log off/in cloud manager before it showed all apps updated
https://forums.adobe.com/thread/1825014

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

I cannot install the trial for Acrobat XI Pro. The file downloaded fine, but it does not open. What can I do?

For Windows:
http://trials2.adobe.com/AdobeProducts/APRO/11/win32/AcrobatPro_11_Web_WWMUI.exe
For MAC:
http://trials2.adobe.com/AdobeProducts/APRO/11/osx10/AcrobatPro_11_Web_WWMUI.dmg
ACROBAT XI

Error. Cannot install public key for specified user

I'm getting "Error. Cannot install public key for specified user" when trying to add a public ssh key for a service processor user on a V20z. I've tried it for different users and still get the error. The same operation works fine on a V40z. Any help would be appreciated.

That would be great if the resolution was that simple. I am using a public key I generated using the putty key generator. Below is the key I would use if I got that far. However I get an error on the "ssh authentication publickey" attribute so I never get the chance to enter a public key. What code version and hardware version are you running that this worked on?
AAAAB3NzaC1yc2EAAAABJQAAAIEA2h00RCKBbpbrTWSe/3TYAvRpkJz7tLwQDCf9
4fDJUWUGrmxXHeomuBhNGZh7tyfFjRL2CKY6nWmFyKN/eDm0PF4IWhhCArzOPVDu
q7Nu2y/pD8wWH8dH4a3zRpkLSekNJtH6lzuqmY0zqz9TnZlpS6g4LI1a+lOGSmhU
/HySw9s=
ciscoasa(config)#username test nopassword privilege 15
ciscoasa(config)#username test attributes
ciscoasa(config-username)#ssh ?
configure mode commands/options:
Hostname or A.B.C.D The IP address of the host and/or network authorized to
                       login to the system
X:X:X:X::X/<0-128>   IPv6 address/prefix authorized to login to the system
scopy                Secure Copy mode
timeout              Configure ssh idle timeout
version              Specify protocol version to be supported
exec mode commands/options:
disconnect Specify SSH session id to be disconnected after this keyword
ciscoasa(config-username)# ssh
ciscoasa(config-username)# sh ver | in Ver
Cisco Adaptive Security Appliance Software Version 9.1(1)
Device Manager Version 7.1(1)52
ciscoasa(config-username)#

Cannot Install Graphics Driver for windows 7 64 bit...

Hi... I cannot find a suitable amd driver setup file for my windows 7 64 bit machine of HP.. Can anyone help??!!

Hi:
Please see my reply to your other post at the link below...
http://h30434.www3.hp.com/t5/Notebook-Display-and-Video/Cannot-Install-Graphics-Driver-for-windows-7...

Cannot install xmlp plugin for word 2007 on Windows 7 64bit

I cannot install xmlp plugin for word 2007 on Windows 7 64bit. I keep getting a "java runtime not installed" error. I have applied the latest updates to word. Is there a fix to this?

Hi,
Even if you use a 64bit OS, the office version could be either 32bit or 64bit. Which one do you use? If already installed a 64bit version Office, try to switch to a 32bit one, because it will work fine and might solve your problem too.
*[url http://www.java-forums.org/blogs/advanced-java/collection/]Java collection*

Qosmio F30-112: cooling fan is running very fast

Hi,
I want to ask somebody thier, my laptop qosmio F30 -112 recently every time i start my computer i heard that the cooling fan is running very fast (i mean) it wasn't stop unlike before its running smooth only i heard it when i playing games but not continuous, then after that my computer now running slow.
Somebody can help me what im going to do?
thanks: rtmasagca

Hi
F30 is a little bit older notebook series I think about 3 years old or older... did you clean the cooling modules in the meantime?
I think there is a lot of dust and debris inside the notebook and I think this prevents the air from circulation and therefore the fans run faster.
Try compressed air spray this should help to remove dust and debris.
Good luck

Problem Installing Virtual PC for XP Mode in Win 7 Pro(64) SP1

XP Mode has successfully installed, but Virtual PC has not. Installing Virtual PC requires only a Windows Update, so I downloaded the correct file -- Windows6.1-KB958559-x64-RefreshPkg.msu. When I try to install it I get that this update is already installed
on my computer, but I still don't have Virtual PC.
What now?
Thanks for any guidance that can be offered.
Rob

Installing Virtual PC requires only a Windows Update...
Kinda/sorta.
<QP>
To use Windows XP Mode, you need to download and install Windows XP Mode, and Windows Virtual PC, the program that runs virtual operating systems on your computer.
When you install a program in Windows XP Mode, the program becomes available for use in both Windows XP Mode and Windows 7.
To download and install Windows XP Mode
Go to the Windows XP Mode page in Download Center.
Under Quick Details, select your language.
Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
Select a version of Windows XP Mode to install and click Install.
Note:              Windows XPMode_N versions don't include Windows Media Player.
Click Run in your browser's message bar, and follow the instructions on the screen.
When setup is completed, click Finish.
To download and install Windows Virtual PC
Go to the Windows Virtual PC page in Download Center
Under Quick Details, select your language.
Click Continue and follow the instructions on the screen to validate your copy of Windows 7.
Select a version of Windows Virtual PC to install and click Install.
Note: The x64 version works with 64-bit versions of Windows 7. The x86 version works with 32-bit versions of Windows 7. To find out if your PC is running 32- or 64-bit Windows 7, click the
Start button , right-click
Computer, and then click Properties. 32-bit and 64-bit information appears next to
System type.
Click Run in your browser's message bar, and follow the instructions on the screen.
Click Yes to install Update for Windows (KB958559).
If you accept the license terms, click I Accept.
After installation is complete, click Restart Now to restart your computer.
To set up Windows XP Mode for first use
Click the Start button , click
All Programs, click Windows Virtual PC, and then click
Windows XP Mode.
<figure class="embedObject"><figcaption class="caption">
Windows Virtual PC and Windows XP in the list of programs         </figcaption></figure>
If you accept the license terms, click I accept the license terms, and then click
Next.
On the Installation folder and credentials page, accept the default location where Windows XP Mode files will be stored, or choose a new location.
Type a password, type it again to confirm it, and then click Next.
On the Help protect your computer page, decide whether you want to help protect your computer by turning on automatic updates, and then click
Next.
Click Start Setup.
After setup is complete, Windows XP Mode opens in a separate window.
</QP>
Source & more:
http://windows.microsoft.com/en-us/windows7/install-and-use-windows-xp-mode-in-windows-7
~Robear Dyer (PA Bear) MS MVP-Windows Client since 2002 Disclaimer: MS MVPs neither represent nor work for Microsoft

Qosmio F30-112: Cannot install Virtual Sound for Vista

Similar Messages

Maybe you are looking for