Qosmio F30-117: Unable to make FTP connections

I have Qosmio F30-117, windows XP, Norton Internet security.
When I attempt to FTP to my website I get FTP connection failed.
I have tried on friends computer and connection was made first time.
When I attached my laptop to his Broadband connection - no FTp. This at least eliminates my router.
I have tried to disbale parts of Norton Internet Security with no success.
Help???

Hi,
so if I were you I would completely disable the Norton software and make sure the Windows Firewall is letting you trough. Otherwise you should check if your friend has set up everything correctly. If you want to test it that your machine is able to connect over FTP, then go to www.kernel.org and grab some ftp address.
Then open your favorite FTP client and try to connect. If the connection really fails then double check all settings and try it again. I think the problem is so small that everyone just oversees it. ;)
Greets

Similar Messages

Qosmio F30-117 - Display issues - red and green lines

Hi there,
I have a qosmio F30-117 and up to recently, I was delighted with everything about it.
Then, mid session, the graphics began to deteriorate, which a reboot fixed.
Then a few days later, it did it again and this time when I rebooted it came up with a corrupted display, lots of aa's all over the place then lines of red and green all over.
Managed to get in by selecting safe mode with networking and got a desktop although still with the red and green lines all over it.
Now its gotten worse still, when I boot up the laptop screen itself is blank, its getting something because it isnt totally black like it is when its powered off, but its blank.
As a check I connected an external monitor and managed to get in again to safe mode with networking, but its still very bad, and still has the red and green lines all over.
I started to have a look around on the good old www and there are numerous posters and articles with problems, and lots mentioning the red and green lines etc...
so Im not alone, but no-one seems to know exactly what it is.
Some have mentioned Toshiba acknowledging this as a problem and doing repairs even if out of warranty.
So, any ideas, any advice, and does anyone know if Tosh have indeed accepted the problem and offering any help??
Thanks in advance

Hi
I think it's a common problem in the Qosmio F30 models. After long term use, the soldering balls under the GPU chipset start to melt down because of the over heat and the bad soldering quality that was used with the F30 model that cannot resist high temperature. Now you have to replace the motherboard, since the GPU is build within the motherboard.
However, there is another two solution for this problem and cost less money amount:
1- do what is called a "heat reflow" for the VGA chipset: to do this you have to take the motherboard out and heat the VGA chipset on the motherboard with a heat gun or you can bake it in the oven for a few minutes at low temp, this will make the soldering balls melt and go back to there right position. However, you need to keep in mind that this solution is temporary and will last maybe for month then you have to do it again and again till you ruin the GPU and then the only solution will be to buy another motherboard. So I don't recommend that you do that at all, but if you don't want to spend a lot of money on a new motherboard this will help you to recover your data, even though there is more easier solution to do the recovery.
Anyways, you can go to youtube and search the term "VGA heat reflow " to see how people do it.
2- send your motherboard to a repairing service that can do what is called reballing: what they do is that they will replace the soldering balls under the VGA chipset with new ones that can resist high temp. and this solution is permanent and even in the future you don't have to worry that the same problem will happen again since the new soldering balls can take high temp change. I do recommend this solution even more than buying a motherboard, since the motherboard that you will get will generate the same problem after few years.
you can find this type of repair service online if you googled the term "VGA reball repair" or you can find it on ebay
If you decided to replace the motherboard I think you will not be able to find a new one, and in case you found one it will be more expensive than a new laptop, but still you can find used motherboard for your qosmio on ebay or online. so you need to do a search and find out what fits your budget or maybe it's better to buy a new laptop.
Sorry about your qosmio, and hope that my post will help you!

Qosmio F30-117 freezes

Hi! I bought a Qosmio F30-117 a little while ago and it has now started to freeze. I get to the desktop alright, then it just completely freezes and I have to take the mains lead and battery off to restart it, then it usually loads up fine.
Anyone else had this problem or has an advice on what I should do?
Thanks,
Nina

Try To Use The Recovery DVD Supplied With Your Laptop , Maybe Your Windows Files
Damaged By Virus Or Something
Remember To Back Up Your Important Data Before You Make The Recovery
Read The Instructions Of How To Use The Recovery DVD Inside The DVD Cover
After The Recovery Finished Check Your Battery With This Tool
http://aps.toshiba-tro.de/battchange/tools/BattTool2EN.zip
more info about Battery Test Utility here:
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=UK&ID=BATTERY_PROGRAM_ 2

Qosmio F30-117: How to switch Bluetooth on?

how to switch blue tooth on, on qosmio f30-117. As software is preinstalled for blue tooth.
Message was edited by: jdukhi

Hi
According to the Toshiba page which I have found in the net, the BT is not available on this unit.
http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/selected_product_option.jsp?service=UK&PRODUCT_ID= 116647&DISC_MODEL=0&toshibaShop=true

Unable to make a connection to OC4J instance - passwords identical for sure

Hi,
I have an unusual problem on my AS instance. We're using AS 10.1.3.5.0 (recently upgraded from 10.1.3.3.) and suddenly we're receiving the next error when we try to go to the instance <MY_INSTANCE> in enterprise manager:
Unable to make a connection to OC4J instance <MY_INSTANCE>on Application Server <MY_SERVER>. A common cause for this failure is an authentication error. The administrator password for each OC4J instance in the Cluster must be the same as the administrator password for the OC4J instance on which Application Server Control is running.
I've been working on this issue for a whole day now and I'm 100% sure, the passwords fore domain home and <MY_INSTANCE> are the same and it is the password I use for logging into the EM. I've been following the instructions from http://download.oracle.com/docs/cd/B31017_01/core.1013/b28940/em_app.htm#CEGCFFCB but no success.
Can anyone please try and explain what might be wrong? The error also appear if I click on default_group group. The message is:
Error
A connection could not established to some members of the group default_group. Common causes for this failure are an authentication error or a JMX protocol mismatch.
The administrator password for each OC4J instance in the group must be the same as the administrator password for the OC4J instance on which Application Server Control is running.
The JMX protocol is specified by the property oracle.oc4j.jmx.internal.connection.protocol and the remote OC4J instance must be configured to use that protocol.
Any help would be very appreciated.
Thanks, BB

On further search I managed to view the ascontrol.log file. Here is the error that is being thrown (my instance is called archibus):
2010-07-08 15:05:14,355 [EMUI_15_05_14_/console/ias/cluster/clickThruLogin] WARN cluster.ClusterUtil switchDefaultJMXTarget.541
- couldn't connect to oraias_09.boswell.bath.ac.uk, archibus
oracle.oc4j.admin.jmx.shared.exceptions.JMXRuntimeException: RuntimeException thrown by the invoke method of the Dynamic MBean
at oracle.oc4j.admin.jmx.distributed.SimpleInstanceMBeanServerDelegate.queryNames(SimpleInstanceMBeanServerDelegate.java:556)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.queryNames(LocalizationFilterMBeanServer.java:442)
at oracle.sysman.ias.studio.jmx.spi.JMXConnectorImpl.queryNames(JMXConnectorImpl.java:352)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryNames(SDKJMXUtil.java:236)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryNames(SDKJMXUtil.java:214)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:129)
at oracle.sysman.ias.studio.oc4j.OC4JJMXUtil.getDisplayName(OC4JJMXUtil.java:842)
at oracle.sysman.ias.studio.cluster.ClusterUtil$Switcher.switchDefaultJMXTarget(ClusterUtil.java:508)
at oracle.sysman.ias.studio.cluster.ClickThruLoginHelper.handleEvent(ClickThruLoginHelper.java:111)
at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283)
at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.management.RuntimeMBeanException: RuntimeException thrown by the invoke method of the Dynamic MBean
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:227)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.invoke(LocalizationFilterMBeanServer.java:579)
at oracle.oc4j.admin.jmx.distributed.SimpleInstanceMBeanServerDelegate.queryNames(SimpleInstanceMBeanServerDelegate.java:550)
... 32 more
Caused by: javax.management.RuntimeMBeanException: Error calling queryNames for pattern: *:j2eeType=J2EEServer,* on VM: ias:j2eeType
=JVMProxy,name=1,J2EEServerGroup=default_group,J2EEServer=archibus,ASInstance=oraias_09.boswell.bath.ac.uk
at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:709)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
... 37 more
Caused by: oracle.oc4j.admin.jmx.shared.exceptions.JMXClusterRuntimeException: Error calling queryNames for pattern: *:j2eeType=J2EEServer
,* on VM: ias:j2eeType=JVMProxy,name=1,J2EEServerGroup=default_group,J2EEServer=archibus,ASInstance=oraias_09.boswell.bath.ac.uk
at oracle.oc4j.admin.management.farm.mbeans.J2EEServerAgr.queryLocalNames(J2EEServerAgr.java:1373)
at sun.reflect.GeneratedMethodAccessor278.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
at sun.reflect.GeneratedMethodAccessor72.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:243)
at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1073)
at javax.management.modelmbean.RequiredModelMBean.invoke(RequiredModelMBean.java:954)
at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:700)
... 38 more
---- Embedded exception
javax.management.RuntimeMBeanException: RuntimeException thrown by the invoke method of the Dynamic MBean
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:227)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.invoke(LocalizationFilterMBeanServer.java:579)
at oracle.oc4j.admin.jmx.distributed.SimpleInstanceMBeanServerDelegate.queryNames(SimpleInstanceMBeanServerDelegate.java:550)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.queryNames(LocalizationFilterMBeanServer.java:442)
at oracle.sysman.ias.studio.jmx.spi.JMXConnectorImpl.queryNames(JMXConnectorImpl.java:352)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryNames(SDKJMXUtil.java:236)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryNames(SDKJMXUtil.java:214)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:129)
at oracle.sysman.ias.studio.oc4j.OC4JJMXUtil.getDisplayName(OC4JJMXUtil.java:842)
at oracle.sysman.ias.studio.cluster.ClusterUtil$Switcher.switchDefaultJMXTarget(ClusterUtil.java:508)
at oracle.sysman.ias.studio.cluster.ClickThruLoginHelper.handleEvent(ClickThruLoginHelper.java:111)
at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283)
at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Caused by: javax.management.RuntimeMBeanException: Error calling queryNames for pattern: *:j2eeType=J2EEServer,* on VM: ias:j2eeType
=JVMProxy,name=1,J2EEServerGroup=default_group,J2EEServer=archibus,ASInstance=oraias_09.boswell.bath.ac.uk
at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:709)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
... 37 more
Caused by: oracle.oc4j.admin.jmx.shared.exceptions.JMXClusterRuntimeException: Error calling queryNames for pattern: *:j2eeType=J2EEServer
,* on VM: ias:j2eeType=JVMProxy,name=1,J2EEServerGroup=default_group,J2EEServer=archibus,ASInstance=oraias_09.boswell.bath.ac.uk
at oracle.oc4j.admin.management.farm.mbeans.J2EEServerAgr.queryLocalNames(J2EEServerAgr.java:1373)
at sun.reflect.GeneratedMethodAccessor278.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.Trampoline.invoke(MethodUtil.java:36)
at sun.reflect.GeneratedMethodAccessor72.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.reflect.misc.MethodUtil.invoke(MethodUtil.java:243)
at javax.management.modelmbean.RequiredModelMBean.invokeMethod(RequiredModelMBean.java:1073)
at javax.management.modelmbean.RequiredModelMBean.invoke(RequiredModelMBean.java:954)
at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:700)
... 38 more
---- Embedded exception
javax.management.RuntimeMBeanException: Error calling queryNames for pattern: *:j2eeType=J2EEServer,* on VM: ias:j2eeType=JVMProxy
,name=1,J2EEServerGroup=default_group,J2EEServer=archibus,ASInstance=oraias_09.boswell.bath.ac.uk
at oracle.oc4j.admin.jmx.server.mbeans.model.DefaultModelMBeanImpl.invoke(DefaultModelMBeanImpl.java:709)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.invoke(LocalizationFilterMBeanServer.java:579)
at oracle.oc4j.admin.jmx.distributed.SimpleInstanceMBeanServerDelegate.queryNames(SimpleInstanceMBeanServerDelegate.java:550)
at oracle.oc4j.admin.jmx.server.state.LocalizationFilterMBeanServer.queryNames(LocalizationFilterMBeanServer.java:442)
at oracle.sysman.ias.studio.jmx.spi.JMXConnectorImpl.queryNames(JMXConnectorImpl.java:352)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryNames(SDKJMXUtil.java:236)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryNames(SDKJMXUtil.java:214)
at oracle.sysman.ias.studio.sdk.SDKJMXUtil.queryName(SDKJMXUtil.java:129)
at oracle.sysman.ias.studio.oc4j.OC4JJMXUtil.getDisplayName(OC4JJMXUtil.java:842)
at oracle.sysman.ias.studio.cluster.ClusterUtil$Switcher.switchDefaultJMXTarget(ClusterUtil.java:508)
at oracle.sysman.ias.studio.cluster.ClickThruLoginHelper.handleEvent(ClickThruLoginHelper.java:111)
at oracle.sysman.ias.studio.sdk.AbstractController.handleEvent(AbstractController.java:769)
at oracle.sysman.emSDK.svlt.PageHandler.handleRequest(PageHandler.java:378)
at oracle.sysman.emSDK.svlt.EMServlet.myDoGet(EMServlet.java:765)
at oracle.sysman.emSDK.svlt.EMServlet.doGet(EMServlet.java:283)
at oracle.sysman.ias.studio.app.StudioConsole.doGet(StudioConsole.java:385)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.sysman.ias.studio.app.BrowserVersionFilter.doFilter(BrowserVersionFilter.java:75)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
at oracle.sysman.ias.studio.app.MultipleJVMFilter.doFilter(MultipleJVMFilter.java:85)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.PostLogonFilter.doFilter(PostLogonFilter.java:80)
at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:17)
at oracle.sysman.ias.studio.app.ShortHostnameRedirectFilter.doFilter(ShortHostnameRedirectFilter.java:68)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:642)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:391)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:908)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:458)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)

Qosmio F30-140: How to make composite-in or video-in feature working

Hi,
I was using windows XP MC version, but now I switched to windows 7 64-bit version and I don't know how to make the composite-in or the video-in feature work.
Does win-7 driver support this feature! or I need to use a certain software to make use of it?!
Another thing I'm missing in this new windows version is the Dolby effects equalizer.
Could any body tell me how to add this option to my sound card device or send me a driver that has this option.
Thanks in advance.

Hi
As far as I know there is not full Win 7 support for F30 Qosmio.
I found some Win 7 32bit drivers on the driver page but there are no 64bit drivers.
There are Vista 64bit drivers check it!
The Sigma sound driver has been released for Windows Vista 64 Bit. Try it!
The composite-in or video-in port can be used in order to receive video signals from some external devices. For example you can connect a Xbox to the F30 and can use it in connection with Windows Media Center.
http://www.microsoft.com/windows/windows-media-center/default.aspx
You can also conenct an camcorder or similar devices.

Qosmio F30-117 - green and blue lines on the screen

So my F30-117 has been working well recently until I turned it on and had green and blue lines (sort of like scan lines) overlapping the screen.
I tried to install new drivers from nvidia, but that didn't work, as Vista just picked them up as unknown.
Anyone got a solution? Do you think the graphics card needs to be reseated?
Thanks in advance!
- Shayde Zehetbauer.

You can easy determine what the reason is for this.
Do you know how?
Just connect an external monitor to the notebook and check the picture on it.
If you have the same issue on the external monitor the reason is the graphic card and/or mainboard, if not its an internal display issue.
Check this!
Furthermore you should only use the drivers from Toshiba. The Nvidia drivers dont have an overheat protection so the graphic chip could be damaged. Its on your own risk.
So try to install the drivers from Toshiba.

Prob & Solution: Unable to make RDP connection using newly added Microsoft Account to win10 tech preview hosted on AzureVM

Problem description:
After VM deployment is finished, remote desktop into the Windows 10 client OS with the created admin credentials
Open PC Settings -> Users and Accounts -> manage other users (this is the new UX not the old classic add user dialog)
Add a Microsoft account to the desktop, leave it as a standard user
Log Out
Make RDP connection using login of DNSName\[email protected]
Note: DNSName = connection string you are using in RDP
[email protected] is whatever liveID you are using.
Problem: If it was working you will get a message that this user does not have access rights to remote desktop to the computer
Error: Unknown user or bad password is what I would get
Solution:
Log back on as admin user with RDP
Using the new UX from " PC Settings -> Users and Accounts -> " delete the recently created microsoft account
Create a local (not microsoft account) account where with the name that would be before the @ (i.e. user77)
Go to the Old user management interface (either the computer management MMC or the "System Properties->Remote" tab and give the created local user remote desktop access rights.
Now log off as admin
Remote desktop and use username of DNSName\User77 (note no @outlook.com)
Let the login process finish
Make sure any feedback questions are answered
Now navigate to the new UX using " PC Settings -> Users and Accounts -> " and link the local account with your Microsoft account.
You will have to authorize the microsoft account, typically with a text message + verification code
Wait 2 minutes (using a A1 size VM there seemed to be some background stuff for account linking)
Log out
Now log in using DNSName\[email protected]
Success!
I hope this helps anyone else who is using Azure VM's to test out Windows 10 client technical preview.
-N
neilgo

Hi
We use a custom imagine and experience this quite alot. Usually host name is missing and we have to redeploy.
Seems to have gotten worse as we add more vms.
Should we not sysprep when capturing a vm?
Orginal vm came from the gallary and we've simply resized os to 30gb.
Main role for our vms is job processing so stop deallocate when finish to keep costs down buts prooving to be more trooblesome that expected due vms dieing.
We have a number which we don't shut down which are problem free. so I suspect the stop deallocate and self heal are still early days.
My monitor has reported issues with 40+ vms this evening. Are there issues or updates going on in western europe?

Qosmio F30-117: Can you receive film four?

The recent driver release has finally allowed me to receive digital tv on my F30-117 in the UK. However, I can't get film four, which is now available on freeview. Can anyone get this on laptop?
Cheers,
Peter

Don't be mad at me but I dont understand you.
What did you mean with I can't get film four ?
You are not possible to watch movies or what?

Qosmio F30-117: How Vista calculate Win Experience Index Graphics score?

My F30-117 has a Display adapter type NVIDIA GeForce Go 7600. WIE gives this a graphics score of *4.9* based on the following info:
Total available graphics memory 399 MB
Dedicated graphics memory 128 MB
Dedicated system memory 0 MB
Shared system memory 271 MB
However my G40-108 has a Display adapter type NVIDIA GeForce 8600M GT. WIE only gives this a graphics score of *4.4* based on the following info:
Total available graphics memory 1791 MB
Dedicated graphics memory 512 MB
Dedicated system memory 0 MB
Shared system memory 1279 MB
Anyone know why? Both PCs have the latest drivers and all available Windows updates. Both are running Vista Ultimate. If anything I would expect the scores to be the other way around !

Hi
The Windows Experience Index Vista feature that is designed to help better understand
how Windows Vista and other software will perform on your computer.
As far as I know the scale of the Windows Experience Index ranges from 1.0 to 5.9.
A higher base score means that your computer will perform better as a computer with a lower score.
I dont want to explain the whole features because there are many useful Microsoft pages which already provide such informations:
Check this:
[Windows Experience Index: An In-Depth Look|http://windowsvistablog.com/blogs/windowsvista/pages/458117.aspx]
or this MS website:
[Windows Experience Index|http://www.microsoft.com/windows/products/windowsvista/buyorupgrade/experienceindex.mspx]
Bye

Unable to make a connection with the external ip address

I made a simple chat program in order to test the networking. I was able to make local connections using the internal ip addresses, bu when I try the external ip address, the connextion fails.
Here is my ServerSocket in the MessengerServer class : ServerSocket server = new ServerSocket(1234);
And here is the code that worked in the local network in the MessengerClient class: s = new Socket(InetAddress.getByName("192.168.1.4"), 1234);
I also tried that code, using both the external and internal addresses : s = new Socket(InetAddress.getByName("71.178.183.40"), 1234, InetAddress.getByName("192.168.1.4"), 1234);
Can anyone help me?

francois203 wrote:
Yes, it is the router address (WAN address),Then you have to set up your router for port forwarding, if you want a computer behind that router to receive incoming connection requests.
but I suppose that to communicate with another computer not in the local network I need both the wan and the lan addresses.That depends on what precisely you mean by "communicate with." For instance, any website I visit "communicates with" my computer, and it knows nothing about my computer's private IP address.
But I don't know how to construct a socket able to have both the router and the local address.Set up your router for port forwarding. The client doesn't have to know anything about what's behind the router. (Note that this assumes that a) your overall approach is sound and b) your ISP will allow incoming connections. I have no way of knowing if either of those is true.)

HT1551 I changed my password on the computer which it accepted. I changed the password on my Apple TV but unable to make a connection between the two units. The password is the same for bith the Aplle TV and the computer. I am using the Fire boc browser b

Help if you can!
I have been having an on going problem with Aplle TV. I have the Firefox browser because the Internet Explorer would not work.The Apple tech suggested this may be part of the problem The latter browser would not download during my recent upgrade to computer. I am unable to connect my apple TV . I have the same password on my computer and the Apple Tv but no connection takes place. I am lost in an electronic jungle it would appear. I keep getting the same message when I attempt to connect - error # 37. Any suggestions! The Apple Tv did however work for a while in spite of the Firefox browser.
Norman

Norman, tv doesn't connect to a browser, Firefox or Safari - rather
it relates to iTunes. Both tv and iTunes accounts require your ID.
If you are logged in to both iTunes and your tv with your ID you
can then activate Home Sharing of your iTunes Library, Select
photos to share, etc.
All best, Tom

Unable to make SSL connection from Proxy Server to Directory Server

I have recently installed Directory Proxy Server 5.2 Patch 3 on Solaris 9 server. Backend directories are Sun Directory Server 5.2sp3 using Thawte signed certificates.
I can't get the Proxy Server to make a successful SSL connection to the Directory Servers. The proxy server can make the non-ssl connection without problem. When the Proxy Server attempts the SSL connection it gives SEC_ERROR_UNTRUSTED_ISSUER error. The SSL certificates on the Directory Servers are signed by Thawte and have just recently been updated. The certificate for the Proxy Server is also signed by Thawte. The CA certificate is loaded in both the Proxy Server and the Directory Server.
I also have an iPlanet Directory Access Router (iDAR) 5.0 Server that is our current production server that serves these same directories and I haven't had a problem with SSL connection with it. So, the certificates are good.
I've encluded an exerpt from the Proxy Server log below for one of SSL connection attempts.
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [STAT/CONN]    [   560
307] Connection from secured listen port. New connection is on socket 37.
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [STAT/CONN]    [   560
305] Number of open connections is 1.
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [STAT/CONN]    [   171
211] [client(         152.3.100.30, 37)] Accepting connection via dukenet-group
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   302
023] Failure with CERT_VerifyCertNow (checking signature, usage: "certUsageSSLSe
rver").
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   302
023] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
729] Rejected certificate on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
729] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
728] Certificate rejected on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
728] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
721] Read on socket 38 failed.
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
721] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   301
006] Unexpected error on socket 38. (Error: -8172).
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   171
002] [client(         152.3.100.30, 37)] [server( 152.3.101.110+ 636, 38)] L
ost connection to server, trying to failover to another
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   302
023] Failure with CERT_VerifyCertNow (checking signature, usage: "certUsageSSLSe
rver").
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   302
023] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
729] Rejected certificate on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
729] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
728] Certificate rejected on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
728] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   385
717] ber_flush unexpected error on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   385
717] SEC_ERROR_BASE + 20, NSPR error: -8172 (0xffffe014). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   385
717] ber_flush unexpected error on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   385
717] NSPR error: -5938 (0xffffe8ce). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
721] Read on socket 38 failed.
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   385
721] NSPR error: -5938 (0xffffe8ce). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   301
006] Unexpected error on socket 38. (Error: -5938).
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [NOTICE]       [   171
002] [client(         152.3.100.30, 37)] [server(    152.3.232.3+ 636, 38)] L
ost connection to server, trying to failover to another
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   385
717] ber_flush unexpected error on socket 38
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   385
717] NSPR error: -5938 (0xffffe8ce). Native errno is: 11
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [EXCEPTION]    [   190
102] [client(         152.3.100.30, 37)] Rejecting request The server is tempor
arily busy
Aug 30 2005 16:12:12 king.oit.duke.edu SunONEDPS[ 17471]: [OP/CONN]      [   170
904] [client(         152.3.100.30, 37)] [server( 152.3.101.110+ 636, 38)] C
onnection unbound by client

No, that was on 5.1. For 6.0, my classpath has just:
%JAVA_HOME%\lib\tools.jar;%WL_HOME%\lib\weblogic_sp.jar;%WL_HOME%\lib\weblogic.jar;
%CLASSPATH%
This works fine.

Unable to make a connection

Hi all,
i wrote the below code to made a connection to some URL:
+(NSString *) load:(NSString *)url {
@try {
NSString *bodyStr = @"";
NSData *requestData = [bodyStr dataUsingEncoding:NSUTF8StringEncoding];
NSMutableURLRequest *theRequest = [NSMutableURLRequest requestWithURL:[NSURL URLWithString:url]];
[theRequest setHTTPMethod:@"GET"];
[theRequest setHTTPBody:requestData];
[theRequest setValue:@"Basic aXBob25lcG9jMTIzOjFwaDBuM3Nkay1idDQyOTQ4" forHTTPHeaderField:@"Authorization"];
//Basic aXBob25lcG9jMTIzOjFwaDBuM3Nkay1idDQyOTQ4
//NSLog(theRequest);
NSHTTPURLResponse *theResponse = NULL;
NSError *theError = NULL;
NSLog(@"Sending HTTP Request: \n%@", bodyStr);
NSData *theResponseData = [NSURLConnection sendSynchronousRequest:theRequest returningResponse:&theResponse error:&theError];
NSString *response = [[[NSString alloc] initWithData:theResponseData encoding:NSUTF8StringEncoding] autorelease];
//NSArray * all = [NSHTTPCookie cookiesWithResponseHeaderFields:[response allHeaderFields] forURL:[NSURL URLWithString:url]];
NSLog(@"HTTP Response: \n%@", response);
NSInteger httpStatus = [theResponse statusCode];
NSLog(@"HTTP status ::> %d", httpStatus);
if(httpStatus == 200) {
return response;
} else if(httpStatus == 500) {
[Utils showMessage:response title:@"Error"];
return nil;
@catch (id ex) {
NSLog(@"Exception occured in getInfo ::> %@", ex);
return nil;
return nil;
But i am unable to get the data by hitting the URL. In console the Response is print like this:
Please Note: Access to this web site requires that cookies pass properly between your web browser and this web server. Please check the following and retry your request:
your web browser is configured to accept cookies.
you are using a fully qualified domain name in your URL.
http://server.domain.com/index.html is CORRECT.
http://server/index.html is INCORRECT.
http://123.123.22.22/index.html is INCORRECT.
<HR>
can any one help me how to resolve this problem?

I am getting below Error:
Please Note: Access to this web site requires that cookies pass properly between your web browser and this web server. Please check the following and retry your request:
your web browser is configured to accept cookies.
you are using a fully qualified domain name in your URL.
http://server.domain.com/index.html is CORRECT.
http://server/index.html is INCORRECT.
http://123.123.22.22/index.html is INCORRECT.
<HR>
i am unable to understand the situation. is this because of any server problem or any other thing?

Re-installation of Qosmio F30-117

Does any body know how can I get full 60GB space on second hard disk.
I sent my laptop for repair because hard disk was faulty. Now I got it back and I was trying to Re-Install from Recovery Disk. Due to no Clear instruction how to use Recovery CD, I Run the CD couple of time. But when I checked both drives there Software installed on it without using RAID option. I formated the D:/ Drive but it displays 55.8 GB instead 60GB and the Drive Label changed to Blue where as rest of the labels are in black.
Have anybody came across this type of problem please advice me what can I do

As far as I know the Qosmio Player is installed on a hiding partition.
Maybe therefore some GB are missed.
In the user manual you will find a lot of infos about the RAID and the installation.
Check it.
I have also find a info that when using the RAID-1 (mirroring), the OS recognizes the lesser capacity of the 2 HDDs.

Qosmio F30-117: Unable to make FTP connections

Similar Messages

Maybe you are looking for