Qosmio F30-140 - How to use Flash USB boot option?

Dears,
After I update my laptop BIOS, when I start my laptop I find new boot method, it is from Flash USB ?:| How can I use it and what type of file must be in it? I mean .iso or what?
Thanks

Hi
I dont have Qosmio F30 so I cant test it for you but I think this options means that you can boot from an USB stick for example. Have you checked this?
You cant boot from an iso file because you must create a bootable media. For example a Windows start disc or a Linux version that you can boot from USB stick.

Similar Messages

Qosmio F30-127: How to use SD card - no SD card drive icon

Could some one tell how to use SD in F30-127.
I was trying to get picture from my SD card.
I inserted into slot but no Drive ICON was displayed

Hmmm. Please check if the SD card slot was recognized in the device manager.
There should be no yellow exclamation mark!
Other hint;
- Remove the SD card from the slot
- Go to the device manager and remove the SD card controller
- Now reboot the notebook
- After new reboot the windows should recognize and install a new hardware. This is a SD card controller.
- Now try to insert the SD card again!
By the way; did you use the compatible SD card size?

Qosmio F30-140: How to make composite-in or video-in feature working

Hi,
I was using windows XP MC version, but now I switched to windows 7 64-bit version and I don't know how to make the composite-in or the video-in feature work.
Does win-7 driver support this feature! or I need to use a certain software to make use of it?!
Another thing I'm missing in this new windows version is the Dolby effects equalizer.
Could any body tell me how to add this option to my sound card device or send me a driver that has this option.
Thanks in advance.

Hi
As far as I know there is not full Win 7 support for F30 Qosmio.
I found some Win 7 32bit drivers on the driver page but there are no 64bit drivers.
There are Vista 64bit drivers check it!
The Sigma sound driver has been released for Windows Vista 64 Bit. Try it!
The composite-in or video-in port can be used in order to receive video signals from some external devices. For example you can connect a Xbox to the F30 and can use it in connection with Windows Media Center.
http://www.microsoft.com/windows/windows-media-center/default.aspx
You can also conenct an camcorder or similar devices.

Re: NTLDR and Qosmio f30-140

Hello fellows
My Toshiba is Qosmio f30-140 ,it came with xp windows, but I installed on it windows 7 and it was working very well for almost 2 years until i got problem with the display card started as little green dots till blank screen and these were over one year so I wanted to instal new windows 7.
So i remove my main HDD and connected it to other PC and format the C partition ,and copied windows source in the C partition and made the HDD in bois as primary boot and restart BUT i got NTLDR is missing press ctrl+alt+del to restart
*Notes*
1 - I have problem in the display card since i installed windows 7. i got the yellow triangle on it at device manager window.
2 - my screen doesn't work, it just appear the qosmio screen for one second and disappear when i start it. So i am using external LCD screen.
3 - I installed extra HDD (it has the space for extra HDD).
*I got Questions for you :*
1- How can i enable the laptop to boot from usb flash memory with windows 7 source
2- How can i instal windows 7 NOOWW ????
Thanks and appreciate any helps
Canadian shark

NTLDR error means the Windows boot system is corrupted or there are missing files.
Try holding down the Zero (0) key during power up to initiate the Recovery Partition. If it works, you can install Windows via the original factory Windows (XP/Vista).
You can install Windows from a USB Flash Drive (I guess you need at least 8GB or 16GB), but you need to make it bootable first, then prepare Windows files.
Press F12 during power up to view the boot menu, then select USB.
If it won't boot, then the USB drive was not prepared properly, or USB emulation needs to be set to "HDD" in the BIOS.

Qosmio F30-140: Cannot install Windows OS - No HDD

I've bought Qosmio F30-140 and I can't install winXP from my original cd:/ The recovery cd works great but it installs a lot of stuff I don't need so I want a clean install....
so when I run my winXP cd setup I get error message: "setup did not find any hard disk drives installed in your computer"...
though I can run windows normally which is installed from the recovery cd... I think it's something with hdd drivers.
How can I overcome this? Thanx in advance:)

Hi Sarunas
Its nothing wrong! Nothing with HDD or another hardware!
You have simply not installed the RAID driver
The Toshiba recovery CD contains the RAID driver and therefore you can install it without any problems.
But the Windows CD does not contain such driver and therefore the RAID driver must be installed at the beginning of the Windows installation setup procedure.
Windows will ask you for 3rd party RAID driver. The RAID driver you can find on the Toshiba driver page. Download it on the FDD and connect the external USB FDD drive.
From there you will be able to install the RAID driver.
Good luck..
PS: Search in this forum for similar postings... you will find a lot of threads about this theme...

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Req any examples of how to use a USB midi controller/keyboards with Labview TIA

Hi,
To access the MIDI ports you will need to call the Windows SDK. To send MIDI commands is relatively easy, here is an example that shows you how to send data to a MIDI controller or keyboard.
As far as input goes, this is the hard part. There are a series of functions that you need to call to open up the device, set some buffers and and possibly a callback to get notifications on the incoming data.
Reading MIDI data will not be an easy task, your best bet will be to implement this in a DLL and call that DLL in LabVIEW, there should be some code available o the web.
= "http://msdn.microsoft.com/library/default.asp?url=/library/en-us/multimed/htm/_win32_multimedia_... is a link to the Windows multimedia functions that you could use for MIDI input.
Let me know if you have any further questions.
Regards,
Juan Carlos
N.I.

Do you know how to use Flash? can you help?

hi all,
Do you know how to use Flash?
I have been trying for months to find someone who can use
flash, who can help me, with no luck.
I need my links on my website updating, just a couple of them
need the text changing as i need
to change the name/title of some pages. I have tried to do it
myself (using a trial version of flash,
as i dont have flash). the site was made using dreamweaver.
the files are .FLA
and before anyone says 'get the person who made the site to
do it'....He wont, ive tried.
when i tried to change them myself i cocked them up and now
they dont work at all, see my
website and you will see; www.stevenallenphotography.co.uk
so, if you can use flash please can you help me? all i need
doing is the file updating with some
of the link titles/names changing, i.e. one link is
'exhibitions' which needs changing to 'published work',
please get in touch if you can help.
thanks,
steven.

I used divx in my site once its really very nice! but i use it in different host not .mac...try this divx web player with video selector code --------<object id="ie_plugin" classid="clsid:67DABFBF-D0AB-41fa-9C46-CC0F21721616"
width="640" height="480"
codebase="http://go.divx.com/plugin/DivXBrowserPlugin.cab">
<embed id="np_plugin" type="video/divx"
width="640" height="480"
pluginspage="http://go.divx.com/plugin/download/">
</embed>
</object>
<script type="text/javascript">
// This code detects which browser we are
// running into (IE or others) and assigns
// the correct element (object or embed) to
// the "plugin" variable, that we will use.
var plugin;
if(navigator.userAgent.indexOf('MSIE') != -1)
plugin = document.getElementById('ie_plugin');
else
plugin = document.getElementById('np_plugin');
// This is a local JS function used by our form
// element to call the plugin functions using
// the "plugin" variable that we defined above
function openNewMovie()
var url = document.forms['videoSelector'].movie.value;
if(url != '')
plugin.Open(url);
</script><form name="videoSelector">
Choose a video to play:
<select name="movie" onChange="javascript:openNewMovie();">
<option value="" selected>Video Selector
<option value="http://www.yourdomain.com/folderdivx/name.divx">title1 divx
<option value="http://www.yourdomain.com/folderdivx/name.divx">title2 divx
</select>
</form> ---------------------
Hope this help!

How to use Flash Builder for Eclipse Luna ( is it possible??)

How to use Flash Builder for Eclipse Luna ( is it possible??)

Yes. I have Flash Builder 4.6 and 4.7 running in different Eclipse Luna installs.
More details at http://forums.adobe.com/message/4527443
On Mac, I had to have the 32bit version of Luna for 4.6, and the 64bit version of Luna for 4.7 (and I recently started using 4.7 with Eclipse Mars).
For 4.6 you need to first download Eclipse 3.6 and install the Flash Builder 4.6 plugin to that Eclipse install. For 4.7 you need to download Eclipse 3.7 and install the plugin to that Eclipse install. Once it's installed in the 3.x version, you can then copy the fb*.link files from the Eclipse 3.x dropins folders into your Eclipse Luna's dropin folder.
There is an issue where something in Flash Builder 4.7 won't work right when using it as a plugin, not sure but it might be something with building ANEs.

How to use ssd as boot drive and hdd as storage on a macbook pro 13

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one . by formatting using mac software . I would like to run all programs and OS but would love to have my downloads and useless data on run on my 1tb 5400rpm hdd without me have to manual send it there..

Does anyone know how to use SSD as boot drive and have HDD in optical bay as storage on a Macbook pro 13. I mean in that both drives work as one
Each drive mounts as a separate volume. There is no convenient way to make them look like one contiguous volume.*
Franky, with an hdd and a ssd I would recommend you put your home dir on the hdd and leave the ssd for the OS and your key applications. It's relatively easy to do and I think better than moving only portions of your stuff.
How to Move the Home Folder in OS X – and Why
* There are ways to to make musltiple volumes appear as one large drive but I think it is beyond the scope of this discussion and not appropriate to this configuration.

How to use offset for select-option parameter ?

Hi experts
could anybody please let me know how to use offset for select-option parameter. i can able to use offset for table fields, variabiles and all , but don't know how to use for parameters.
following is my code
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
here "prctr" length is 10.
i'm using two tables 1. vbsegd-bupla
                                2. vbsegs-prctr
here prctr+6(4) = bupla.
"Bupla" length is 4
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                             WHERE belnr = it_vbkpf-belnr
                                                               AND gjahr = it_vbkpf-gjahr
                                                               AND bukrs = it_vbkpf-bukrs
                                                               AND bupla IN s_prctr.
the above statement is not working as prctr and bupla lenths are different. here i want to use offset.
SELECT belnr gjahr bukrs prctr sgtxt buzei FROM vbsegs INTO CORRESPONDING FIELDS OF TABLE it_vbsegs FOR ALL ENTRIES IN it_vbkpf
                                                            WHERE belnr = it_vbkpf-belnr
                                                              AND gjahr = it_vbkpf-gjahr
                                                              AND bukrs = it_vbkpf-bukrs
                                                              AND prctr IN s_prctr.
this is working as prctr and s_prctr lengths are equal.
could anybody please help me out in this.
Thanks in advance.
regards
satish

Below code will work for you.
SELECT-OPTIONS: s_prctr FOR vbsegs-prctr OBLIGATORY.
RANGES: s_bupla FOR vbsegd-bupla.
s_bupla[] = s_prctr[].
DELETE ADJACENT DUPLICATES FROM s_bupla.
SELECT belnr gjahr bukrs bupla sgtxt buzei FROM vbsegd INTO CORRESPONDING FIELDS OF TABLE it_vbsegd FOR ALL ENTRIES IN it_vbkpf
                                                              WHERE belnr = it_vbkpf-belnr
                                                                AND gjahr = it_vbkpf-gjahr
                                                                AND bukrs = it_vbkpf-bukrs
                                                                AND bupla IN s_bupla.

Windows 8 does not have a USB boot option

QuestionHow can I boot my Windows 8 laptop from a USB device? I created a recovery disk on a USB thumb drive.
So far I have:
Entered into the UEFI (BIOS) and set USB to boot first.
Disabled secure boot.
I tried to reboot using the general setup options for startup in the windows settings page. I choose boot from USB through the UEFI, but got an error message that system does not have a USB boot option.
To confirm I also created a bootable DVD with an ISO burner, but my laptop cannot detect a DVD boot option either.
I assumed that the firmware of the UEFI for this computer allowed a bootable USB but in practice I cannot seem to get this work.
AnswerTo assist with not being able to boot from a USB device on a Windows 8 laptop, perform the following:
Plug in USB bootable device.
Hold down F12 when restarting and access UEFI menu (option is below drive list). If system is set to fast boot, CLICK HERE for instructions on entering the UEFI.
Go to UEFI and make USB "1st boot".
Disable secure boot.
Go to the "Advance" Tab, select "System".
Change boot order from UEFI to CSM.
Save changes and exit (F10).
Computer will restart and boot from USB drive.
When finished go back into the UEFI and set defaults then save changes and exit (F10). Windows 8 will reboot normally next reboot.

Done that, only choices are "Set up Firefox to Sync" & "Pair a Device". No ''UNLINK THIS DEVICE". Your turn.

HP notebook 635 usb boot option

We have several hp notebook 635 that need to have usb boot option disabled in bios. When i go into bios usb is the only device that I can't disable. Am I missing something? Is it possible to disable usb boot as these computers are being used by students on a network who do not need to this option. Nor sdo we want them to have this option. Thanks in advance.

Some HP bios's are very limited, if it is not available in the bios, you cannot.
Please post your full product Number
#2

Portege A600 - Dissapearing of USB boot option after updating to bios 3.00

USB boot option seems to have disappeared from bios boot sequence menue after I installed bios 3.00. I wonder why this happened and how I can bring it back.

Hello,
normally the USB boot option is available and you can select the supported modi in the bios settings.
In a company environment it is possible to disable USB as boot device with some special tools. In this Case yo ushould ask your administrator.
If you are a single private customer you should visit an ASP.

G400s bios don't have usb boot option

hi all
my laptop is G400s, i want try install linux but i got to bios but usb boot option missing ,
any option i wrong to choose or any suggetion?
pictur below is my bios setting picture:
Link to picture
Link to picture
Link to picture
Link to picture
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules
Solved!
Go to Solution.

hi try2ops,
Welcome to Lenovo Community Forums!
The options set under your BIOS are all set,
With that, try this
Plug in your Bootable USB
Power ON your system then right away start hitting F12
It should give you a Boot Menu Including USB as bootable.
Hope this helps
Cheers!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Satellite L675-S7052 - USB boot option available?

Hi guys,
my friend just bought new laptop from US (Satelitte L675-7052), and he would like to install Windows 7 from USB. His BIOS is AMI v1.4. USB legacy is enabled in BIOS but USB boot option still doesn't appear in boot menu.
Does anybody have solution for that BIOS (laptop model) , please? He sent me some screenshots as well:
[http://www.pixhost.org/show/1907/5070022_dsc_8298.jpg]
[http://www.pixhost.org/show/1907/5070029_dsc_8299.jpg]
[http://www.pixhost.org/show/1907/5070036_dsc_8300.jpg]
[http://www.pixhost.org/show/1907/5070049_dsc_8301.jpg]
[http://www.pixhost.org/show/1907/5070057_dsc_8302.jpg]
[http://www.pixhost.org/show/1907/5070063_dsc_8303.jpg]
Thx for any reply :)

Hey, thx for reply.
It's my friend's laptop and not mine :) And the reason why he wants to install Windows 7 from USB is that I adviced that to him. As I have older Satellite laptop and I prefer to install it in that way - it's faster and i guess more precise :) Plus, my Mat****a DVD mechanic has been screwed for one year now (and I am not going to pay 200 $ for a new internal DVD mechanic at all).

Qosmio F30-140 - How to use Flash USB boot option?

Similar Messages

Maybe you are looking for