Qosmio F30 PQF32E- WI-FI card issue

Dera all,
A long time i am using wi-fi connection for connecting internet. Yesterday i tried to connect wi-fi, i got error. When I am activating wi-fi in notebook, it is getting frozen or working very very slow and even wi-fi card disabled. i am enabling card it show connection failed, can enable. I downloaded latest version for wi-fi card driver, no result same type error. i did already format and re-install system with original Toshiba DVD. Same error, wi-fi not working. Does it means that my wi-fi card is out service? How to test card ? if it is out of service what can i do? how can change my card in my notebook? From where to order?
WiFI card model - Intel(R) PRO/Wireless 3945ABG
Also when i am trying to see my ip in Command prompt(CMD) i get this notification...
Windows IP Configuration
An internal error occurred: A device attached to the system is not functioning.
Please contact Microsoft Product Support Services for further help.
Additional information: Unknown media status code.
Thanks in advance

HI!,
I have already updated BIOS (currently version is 3.90-WIN) also re-installed and installed latest driver of WLAN. Same result! It seems my WLAN card is out of service. I have take off wlan card and put it again it place, i observer that cart getting hot, after that i understand that WLAN card is out of service.... So i have ordered WLAN card. Hope after chaning my Wlan card, everything will works like before!
So it is very interesting for me why card in short period became out of service? what can be reason for that? which factor?
Thanx

Similar Messages

  • Qosmio F30 PQF32E - How to get English version of recovery DVD

    Dear All,
    How to get a English version of recovery DVD disk for this model. I already have but it is in Russian. I don't want to install Russian. Want to re-install system. please if it possible assist me to find ENGLISH version of this DVD.
    Please put it somewhere that i can download!
    Thanks in advance,
    Ilyas

    You will be not able to buy an English Recovery for this notebook model.
    I assume you have purchased this notebook in Russia and therefore youve got a recovery disk with Russian language.
    If you want to use a Vista in English language then you have to purchase a full English Vista version and then you could install it on your notebook.
    There is also an Microsoft Vista language package which allows to change the OS language but this works only with Vista Ultimate version.
    Your Vista seems to be a Home Premium and therefore this will not work!

  • Graphic card issue on Qosmio F30

    My laptop is Qosmio F30-140 (PQF32E).
    After I installed a game Wolfenstin and run it the laptop stop suddenly and didn`t respond and when I restart it, it shows Blue Screen of Death (BSOD).
    I thought it was the RAM. Ive checked it and it is fine. I re-installed the Windows Vista Ultimate 32-bit but the problem of BSOD still is shown and I cant reach or enter the Windows.
    Ive changed the Windows to Win7 32-bit and I entered the windows and everything is fine but when I want to install the driver of my graphic card and restart the laptop the BSOD is shown again and I cant enter the Windows.
    Please advise me. Is it Hardware problem or only the registry must be edited :( ?

    yes i did recover by my original factory cd WMC xp 32 but insallation did not complete due the blue screen of death and i cant enter windows so i formate againe and used windows vista 7 ultimate 32 bit to log in but i cant see my graphic card i used many driver from Toshiba , Nivda and laptopvideo2go sites same problem appear BSD after the driver be installed so i go to safe mode to remove it to enter windwos agian and see only standerd VGA 8bit graphic card cant be edit

  • Qosmio F30-117 - Display issues - red and green lines

    Hi there,
    I have a qosmio F30-117 and up to recently, I was delighted with everything about it.
    Then, mid session, the graphics began to deteriorate, which a reboot fixed.
    Then a few days later, it did it again and this time when I rebooted it came up with a corrupted display, lots of aa's all over the place then lines of red and green all over.
    Managed to get in by selecting safe mode with networking and got a desktop although still with the red and green lines all over it.
    Now its gotten worse still, when I boot up the laptop screen itself is blank, its getting something because it isnt totally black like it is when its powered off, but its blank.
    As a check I connected an external monitor and managed to get in again to safe mode with networking, but its still very bad, and still has the red and green lines all over.
    I started to have a look around on the good old www and there are numerous posters and articles with problems, and lots mentioning the red and green lines etc...
    so Im not alone, but no-one seems to know exactly what it is.
    Some have mentioned Toshiba acknowledging this as a problem and doing repairs even if out of warranty.
    So, any ideas, any advice, and does anyone know if Tosh have indeed accepted the problem and offering any help??
    Thanks in advance

    Hi
    I think it's a common problem in the Qosmio F30 models. After long term use, the soldering balls under the GPU chipset start to melt down because of the over heat and the bad soldering quality that was used with the F30 model that cannot resist high temperature. Now you have to replace the motherboard, since the GPU is build within the motherboard.
    However, there is another two solution for this problem and cost less money amount:
    1- do what is called a "heat reflow" for the VGA chipset: to do this you have to take the motherboard out and heat the VGA chipset on the motherboard with a heat gun or you can bake it in the oven for a few minutes at low temp, this will make the soldering balls melt and go back to there right position. However, you need to keep in mind that this solution is temporary and will last maybe for month then you have to do it again and again till you ruin the GPU and then the only solution will be to buy another motherboard. So I don't recommend that you do that at all, but if you don't want to spend a lot of money on a new motherboard this will help you to recover your data, even though there is more easier solution to do the recovery.
    Anyways, you can go to youtube and search the term "VGA heat reflow " to see how people do it.
    2- send your motherboard to a repairing service that can do what is called reballing: what they do is that they will replace the soldering balls under the VGA chipset with new ones that can resist high temp. and this solution is permanent and even in the future you don't have to worry that the same problem will happen again since the new soldering balls can take high temp change. I do recommend this solution even more than buying a motherboard, since the motherboard that you will get will generate the same problem after few years.
    you can find this type of repair service online if you googled the term "VGA reball repair" or you can find it on ebay
    If you decided to replace the motherboard I think you will not be able to find a new one, and in case you found one it will be more expensive than a new laptop, but still you can find used motherboard for your qosmio on ebay or online. so you need to do a search and find out what fits your budget or maybe it's better to buy a new laptop.
    Sorry about your qosmio, and hope that my post will help you!

  • Qosmio F30 starts with blue stripes during the start screen of Vista

    My Qosmio F30-114 runs since years without Problems with Vista Ultimate.
    Since some Days there is a huge Problem.
    The Qosmio starts with blue stripes during the start screen of vista.
    So I deleted the driver of the graphic card and used the standard vga card driver. the hardware assistent found a driver on the system.
    For a short moment i was very lucky.
    After a restart, there was a blue screen. after the next restard, again the standard vga card driver.
    What can i do?
    The download section of toshiba has no drivers for graphic card.
    And really ... i wonder - how does it works all the years without problems...
    Has anyone a solution?
    thanx
    toshibalover ;-)

    Hi!
    First of all do you have this issue on an external monitor too or only on the internal monitor? Maybe its not a problem of the graphic card so check this with an external monitor.
    I have checked the Toshiba website and there I can find some drivers for the Qosmio F30:
    http://eu.computers.toshiba-europe.com => Support & Downloads => Download Drivers
    Bye

  • Qosmio F30: How to: Manual Installation Of Windows Xp Media Center Edition 2005

    Manual Installation Of Windows Xp Media Center Edition 2005 On Toshiba Qosmio F30 Laptop
    Last Update 3 Oct 2006
    Important Notes Before You Start:
    1-These Steps Used For "Toshiba Qosmio F30" And For Other Qosmio Models That Comes With "Intel Centrino Duo" Cpu's And With Xp Media Center 2005 Installed.
    2-Apply These Steps If You Have Previous Experience In Installing Windows Xp , If You Don't Have That Experience , Then You Can Use The Supplied Recovery Cd To Restore Your System.
    3- Windows Xp Media Center Cd's Are Not Supplied With Your Laptop, If You Want To Get The Cd's You Can Buy It From Many On-Line Shops And If You Do So You Will Get Valid Windows Xp Product Key Which You Will Not Need It (Because You Already Have One You Can Find It In A Small Sticker In The Back Of Your Laptop And You Can Activate Your Windows With It).
    In Other Words ( You Need The First And The Second Cd Of Windows Xp Mce 2005 SP2 Oem).
    4- Do Not Try To Apply These Steps On Other Versions Of Windows Xp , Use "Windows Xp Media Center Edition 2005 Sp2 Oem" Only
    5- You Must Have Usb Floppy Drive To Install "Toshiba Raid Controller" , It Can Be Installed Only By Having The Driver On a Floppy Disk And By Pressing F6 During The Installation Of Windows Xp, If You Do Not Install The Raid Driver Then Windows Xp Will Not Recognize Your Hard Disk.
    6- Disclaimer of liability
    I shall not be responsible or liable, directly or indirectly for any damage or loss caused or alleged to be caused by or in connection with the use of the this site or its content, including but not limited to delays, omissions, and inaccuracies in its content.
    Steps:
    1- Create Drivers Cd From "Toshiba Assist Utility" ,You Should See The Toshiba Assist Icon On The Desktop, Then In The Toshiba Assist Choose The 'protect & Fix' Tab ,There You Will Find The Option `Create Drivers & Tools Cd` And Insert a Blank Cd To Write It
    "If This Option Did Not Work Then You Have To Install The Restore Cd To Get It Work" , The Drivers Are Installed In A Folder Called Toolscd In "C:" Drive. To Install Your Recovery Cd Power On Your Laptop And Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From the Cd.
    2- Create Toshiba Raid Driver From The Drivers Cd, The Toshiba Raid Driver Has To Be Added During The Installation of Windows XP When Asked To "Press F6 If You Need To Install A Third Party SCSI Or Raid Driver".
    In Order To Do That , Insert The Drivers Cd "from Windows " It Will Run Automatically Or Run "Browser.Exe" Inside The Cd The Select "Raid Driver" And Click On "Installation" Button, It Will Show You The Raid Driver files , Insert A Blank Floppy And Copy The Files Into The Floppy "Be Sure That All The Files Be On The Root Of The Floppy" or download the Toshiba RAID driver from the Toshiba driver download web page and extract the zip file to a floppy disk."Again, All The Files Should Be On The Root Of The Floppy Not Inside A Folder"
    3- Connect Your Usb Floppy Drive And Insert Your Windows Xp Mce 2005 Cd 1 And Power On Your Laptop Hold "F12" And Use The Arrow Keys To Choose Cd-Rom Icon To Boot From The Cd.
    When You Get The Message To "Press Any Key To Boot From Cd...", Press Any Key , If You Do Not Press Any Key, It Will Not Boot From Cd-Rom,Press F6 When Asked To "Press F6 If You Need To Install A Third Party Scsi Or Raid Driver".
    The Setup Continues Until You Are Asked Whether You Want To "S = Specify Additional Device". Press 's' And Specify The Toshiba Raid Driver For Xp. Then Press 'enter' To Continue With The Installation.
    Do Not Upgrade Your Xp Installation ,Start New Windows Installation And Partition Your Hard Disk , Windows Installation Will Ask You To Insert Cd 2, And Will Copy Some Files And Will Ask You To Insert Cd 1 Again ,Continue The Setup Until Windows finish The Insallation.
    4- After Windows Finish The Installation Insert Drivers Cd And Select "Microsoft Updates" From The Drivers Cd Click On"Installation Button" ,Click "Qfe" And Install ONLY the Following Updates (Do Not Let The Updates Restart Your PC Until You Finish The Installation of All Updates)
    A- Q896256
    FIX "Computers That Are Running Windows Xp Service Pack 2 And That Are Equipped With Multiple Processors That Support Processor Power Management Features May Experience Decreased Performance"
    B-Q910437
    FIX "High Hit Count Watson Crash In Wu Client"
    C-Q889673
    FIX "Hardware (Dep)-Enabled Computer May Unexpectedly Quit After You Resume From Standby Or From Hibernation In Windows Xp Service Pack 2"
    D-Q896243 (Very Important ,This Will Make SD And MMC Cards To Work)
    FIX "ADD Support The High Speed SD Card"
    Other Updates Are Not Necessary To Install, Because You Will Install It Later When You Run Microsoft Updates From Microsoft Updates Web-site After You Finish Activating Your Windows.
    5- download and run "Intel(R) Chipset Software Installation Utility" from Intel website
    (Restart Your PC After You Finish The Installation)
    Do Not Install "Chipset Driver" From The Drivers Cd , It Is An Old Version , Try To Install The Latest From The Link Above.
    6- Install The "Display Driver" From Drivers Cd (No Need To Restart).
    Note : To Avoid Annoying Messages During Drivers Installation Try To Do The Following:-
    Go To Control Panel , System Properties , Hardware , Drive Signing , Select "Ignore - Install The Software...."
    Go To Control Panel , System Properties , Hardware , Windows Update , Select "Never Search Windows Update For Drivers"
    7- Now You Have To Setup Your Internet Connection and Activate Your Windows So That You Can Run "Windows Updates" From Microsoft Windows Update Website
    Your Internet Connection May Need One Of The Following Drivers (Depending On Your Modem)
    A- If You Your Internet Connection Through LAN Then Install The "Network Driver" From Drivers Cd.
    B- If You Your Internet Connection Through Wireless Then Install The "Wireless Network Driver" From Drivers Cd.
    C- If Your Internet Connection Through USB Then Install The Driver Supplied By Your Modem Manufacturer.
    D- If Your Internet Through Dial-Up Then Install The "Sound Driver" From Drivers CD , This Driver Will Install The Sound Driver And Will Activate The Modem Device and ,A Message Appeared "Find New Hardware ,Modem Device" Ignore The Message And Restart Your PC Then Install "Modem Driver" From Drivers Cd.
    8- Now Go To Windows Update Web-Site And Install All The Necessary Updates "Try To Run Windows Updates Several Times Until You Install All The Updates Because In The First Time, Windows Updates Website Will Install 3 Files Only After That Restart Your Computer And Go To Windows Updates Site Again And Continue To Install The Updates , Select Custom Updates Method And Install All The Critical And Optional Updates".
    9- install "Common Modules" from drivers CD This module is an essential component on Windows XP systems It is required to make other TOSHIBA original programs work properly.
    10- Now Continue To Install Other Drivers And Utilities From Drivers Cd But Do Not Install The Following Drivers:-
    Atheros Client Utility " No Need"
    Bluetooth Monitor " Do Not Install This , Install Only The "Bluetooth Stack".
    Enjoy Your Powerful Toshiba Qosmio Laptop.

    you can see this tutorial also in this website
    salah.coms.ph

  • Qosmio F30 Sound Driver for Windows Server 2008

    I am running a virtual machine with Windows Server 2008 installed on it. The server sees my Sound Driver but it doesn't recognize it and asks for driver all the time. I tried running the Sound Driver installer from the CD but it did work, said: Unsupported operating system. I searched all the web for a driver and I didn't find any. Can any one help in finding this driver for me or let me know it it is possible to manually install this driver?
    I'll be so thankfull for any help.

    As you probably know Qosmio F30 is not designed to be used as a server and generally speaking Toshiba doesnt support Server2008. All you can do is to identify sound card manufacturer and try to find the driver on their support page.
    Sorry buddy but thats all what I can say about it.

  • Re: NTLDR and Qosmio f30-140

    Hello fellows
    My Toshiba is Qosmio f30-140 ,it came with xp windows, but I installed on it windows 7 and it was working very well for almost 2 years until i got problem with the display card started as little green dots till blank screen and these were over one year so I wanted to instal new windows 7.
    So i remove my main HDD and connected it to other PC and format the C partition ,and copied windows source in the C partition and made the HDD in bois as primary boot and restart BUT i got NTLDR is missing press ctrl+alt+del to restart
    *Notes*
    1 - I have problem in the display card since i installed windows 7. i got the yellow triangle on it at device manager window.
    2 - my screen doesn't work, it just appear the qosmio screen for one second and disappear when i start it. So i am using external LCD screen.
    3 - I installed extra HDD (it has the space for extra HDD).
    *I got Questions for you :*
    1- How can i enable the laptop to boot from usb flash memory with windows 7 source
    2- How can i instal windows 7 NOOWW ????
    Thanks and appreciate any helps
    Canadian shark

    NTLDR error means the Windows boot system is corrupted or there are missing files.
    Try holding down the Zero (0) key during power up to initiate the Recovery Partition. If it works, you can install Windows via the original factory Windows (XP/Vista).
    You can install Windows from a USB Flash Drive (I guess you need at least 8GB or 16GB), but you need to make it bootable first, then prepare Windows files.
    Press F12 during power up to view the boot menu, then select USB.
    If it won't boot, then the USB drive was not prepared properly, or USB emulation needs to be set to "HDD" in the BIOS.

  • Qosmio F30-112 Drivers for linux

    Hi,
    I need help. I have Qosmio F30 - 112 and I have linux on my pc. I need drivers for the graphic card.
    Thank You

    Hi Coz_64,
    I agree with the user above. Toshiba doesnt support linux on their computers so you have to search yourself for drivers. You should ask in Linux forum
    The most users here are using preinstalled Windows version
    Check also this article:
    [Do you know some useful website for Linux support on PC? |http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

  • Qosmio F30-147 broken due to overheating

    *Qosmio F30-147*
    Hello dear toshiba users!
    My notebook seems to be broken due to overheating.
    When i noticed it the fan was running on high speed and the chassis was untouchable hot.
    Also the system was frozen and the display showed vertical coloured stripes.
    After an hour or so i tried to boot it again and it failed to boot. All i got was a screen with two-tone vertical stripes ( [see picture|http://img134.imageshack.us/img134/1040/img0472c.jpg] )
    Since my system doesn't seem to boot i guess it's more than just a graphic card failure.
    Any suggestions?
    Highly appreciated!
    I'm lost without my qosmio!

    Hi
    > I'd installed a graphic driver i've got directly from nvidia a few months ago. I wasn't aware of the overheat protection toshiba delivers in their own drivers. Lesson learned.
    This was bad idea. The nVidia graphic card driver are not designed for mobile usage because they don't support the overheating protection. The graphic card driver controls the heat dissipation and if the internal temperature would increase to a critical level, then the graphic card driver would decrease the performance and this would help to go down with the temperature.
    Anyway I'm not quite sure how much is the replacement but it could be a costly affair because the mobo is one of the expensive notebook parts.
    Get in contact with the ASP guys and ask for the details.

  • SD Card Issues and Sound Issues

    Hello all,
    I bought my Xperia Z2 probably 2-3 months ago and I have to say I do love this phone.
    However I have come across a few issues that seems to be, not so common as I cannot find any solutions online (Which is why I'm here).
    I am having 2 issues:
    1st Issue:
    SD Card Issue, this is a funny one as I have not been able to identify what actually causes this issue. Now this all started (or when I started to realise the issue) when I changed some settings in the Camera App. I saw that it was saving photos to "Internal Storage" and since I specifically bought a new SD card for the Xperia Z2, I wanted to store photos on the SD card instead.
    So I changed it to SD Card Storage and all is well (At least, that is what I thought).
    After taking some photos one day, I got home and wanted to preview them, in the photos app and Album (Sony's Photo Previewer) it shows that the photo is corrupted or missing (Depending on which app I'm using). This really annoyed me as the photos I took seems to be all lost and corrupted. So I tried to use a file explorer (Including File Commander) to find the actual file and open it, but it seems to have the same problem. I get this grey background with a picture of a mountain with like a thunderbolt sign (Broken sign).
    Following this, I have also tried to copy some video files onto the SD card and it has been giving me troubles too. I tried to copy videos onto the SD card in 2 ways, first way is to take the SD card out, connect it to a SD card reader and plug that into the computer. After it finished copying onto the SD card, the files would just disappear (I use computers a lot and this was very surprising and new to me... It's like the SD card deleted the files right after it was copied, or maybe even 'hid' the files).
    So since that method didn't work I thought I would try putting the SD card back into the phone and connect the phone to the computer then use Sony's MediaGO (Computer App) to transfer the videos and it sort of worked this time. I copied 14 videos over and only the first 2 videos are working, the others are all "Media is missing" or of some sort. I checked the video's format and they are all either .avi or .mp4 which I don't think is a problem as the first 2 videos are in .avi so surely other .avi videos would work too? Guess not...
    So it seems like I am having troubles with Video and Photos on the SD card as music is working 100% fine. Used Media GO to copy the music on and it's all working wonderfully.
    Some of you might suggest formatting the SD Card, I will say I have... I have tried the above methods before formatting AND after formatting (Formatting using Xperia Z2, or shall I say "erase").
    The SD card I have is Sandisk's 64GB Ultra (I bought this to anticipate 4K or at least 1080p video recordings).
    If the issue here is SD Card compatibility and I was silly enough to not have seen that prior, then I would gladly admit it's my fault and be happy that the solution would simply mean to buy another SD card.
    But that said, I highly doubt that would be the issue due to the fact that the SD card is made for performance (Not the best performance as the Extreme and Extreme Pro range are a lot better) and the card is new.
    2nd Issue:
    Now this issue is not as bad as the first issue, it's something to do with the sound. I understand the phone has 3 sound controls, one for the Ringtone for when you get a notification or/and phone call, one for Media and one for Alarm. 
    What I do is I have the Ringtone volume sitting at around 50% and Media will be dependent as I change it when I open an app but the issue I've been having is this:
    If I open an app (Mainly games that has sound/music) and I change the Media volume to say 70% or even 20%, whenever I get a notification whilst in-app the notification volume seems to be at 100% no matter what I do with the media volume. This is weird as my default Ringtone/Notification volume is sitting very low at around 50% or even if I change it to 20%.
    What am I missing here? Any thoughts?
    With the above 2 issues, last resort would be to factory reset my phone but will be willing to do it if there's a high chance of the issue getting fixed.
    Your thoughts will be greatly received as right now I'm just lost and not sure what to do with the issues. I'm slowly getting the feeling that I should just give up on the phone and use it for phone calls, music and forget about the whole photo/video taking which is very sad as I love the phone's photo/video taking features.
    Solved!
    Go to Solution.

    Hello Rickard,
    Thank you for the link, I have started the test and 10 minutes into the test the speed for writing dropped. Anyways I only managed to get through in writing 8GB of data then I gave up. I then started to verify that 8GB of data that was written on the SD Card.
    I have to say, it does seem like that SD Card is defective
    Thank you for providing the link, what I will do now is get another SD Card and see if the problem is still there.
    If the problem goes away I would consider my 1st issue being solved
    However I am still not sure about my 2nd issue as this is not related to the SD card. Even without the SD card in the phone I seem to be experiencing this problem.
    It's frustrating sometimes as if I'm trying to keep the volume down and play a game I can't because any notifications that comes through will be at 100% volume.
    Perhaps there's a setting I'm missing?
    Your help would be greatly appreciated.

  • 64-bit RAID drivers problem on Qosmio F30 during WinXP installation

    I am trying to install Windows XP 64-bit on my Qosmio F30-140, so I used Windows Vista 64-bit RAID drivers. The windows setup loaded the drivers successfully from USB-FDD, but after I choose C: partition to install the windows and the setup started I got the following message " Setup cannot copy the file: KR10N64.sys ".
    Please advise .

    download the driver again and try to put it on another clean formated floppy disk
    put all the files on the root of the floppy disk
    and try to reply to this message ;)
    Message was edited by: Reaver

  • Qosmio F30 - no sound on Windows XP Pro

    hello,
    first i have install Windows XP MCE, but few day ago i install Windows XP Profesional edition, and lose sound in my notebook.
    What was happen?
    How I can fix that?
    Someone say that is becouse Qosmio F30 cannot support Profesional edition. Truth?

    Hi
    The notebook support Win XP MCE and XP Pro!
    The XP MCE supports some additional features but its the same OS!
    I think you should firstly check if the sound driver was properly installed (check device manager). Check the sound volume control and the sound settings in the control panel!
    Do it!

  • Windows Vista Update posts 64bit driver for Qosmio F30 32bit Vista

    Hello
    Today I've noticed that Windows Vista update is posting the wrong update for one of Qosmio F30 drivers.
    I have Windows Vista 32Bit but Windows Update post a 64bit version of the driver.
    see the screenshot [Here|http://imagefilehost.googlepages.com/f30Wrongupdate.jpg]
    Any idea?

    hmm... this is strange ?:|
    The Toshiba x64 ACPI compliant driver means definitely a 64bit version!!!
    I dont know why the Vista driver update notification reports an 64bit driver for a 32bit OS but usually the 64bit driver shouldn't be compatible with the 32bit OS.
    However, the case seems to be clear dont install it if the driver is not designed for your OS.
    Regards

  • Z1 SD card issues..Often caused by FAKE SD cards, unbeknownst to the user and those trying to help?

    Hi All...
    Well for the last month or so Ive had problems with my 64 gb SD card..losing data, getting corrupt and requiring non stop formatting..until eventually it just died totally.
    Of course, throughout all this I was searching various forums for fixes and reasons why...and as far as I could see it was the fault of the Z1 'killing' SD cards ( I tried the card in other peoples phones and it did not work either..so I assumed it had been corrupted BY the phone!......since it HAD worked perfectly when i first got it)...
    Well...Once it finally died totally this week., I decided to send it back to Samsung for an RMA. The card I had was a good quality,  64gb Samsung Evo SDXC class 10...Bear in mind I purchased it from an  Ebay seller that had  1000s of positive feedback (1 or 2 negs regards late postage only) and the card arrived in the post in packaging with hologram etc, and all appeared good quality....
    Im actually pretty tech savvy..and indeed internet shopping savvy, and have never been ripped off or conned before.....I didnt buy a 64gb EVo that was ridiculously cheap or anything..I paid what they are worth (then about £27)
    But Samsung took one look at it and informed me it was a fake...the issue I had come up against was that the card worked fine up until its ACTUAL (not listed) capacity was reached..which was 7 GIGS!!!..not 64!!!...it was at that point that it started corrupting files and failing in general....
    Which in my case was a couple of weeks after installing it in my phone (and the day I got round to piling all my music on it!)......so I had a few weeks of actual use out of it while all seemd fine....enough time to leave positive feedback for the seller and all!.....DEVIOUS SWINES!!! : D.
    Anyway,
    Now Im wondering...since these symptoms (files vanishing, corrupting etc) have been talked about so many times on these forums and elsewhere...not only on the Xperia Z1, but on all phones and devices that use SD cards...I wonder just how many are REALLY down to fake SD cards.....They are VERY realistic looking fakes...they even work pretty well up to a point (though probs not as fast as a real class 10 if you were to actually test them)..
    In future, when offering help to people with SD card issues..i think I will make an effort to ask them first about the provenance of their SD card, and maybe try and get images of it. (after the fact Ive found several websites that show the fake ones...I even found an image of the EXACT fake I have..same serial numbers, and same tiny printing error and all!....which was THIS site https://thecounterfeitreport.com/product/504/Samsung-micro-SDXC-Memory-Cards.html)
    In all the threads I pored over, trying to find a fix for my SD card issues..I can not remember a single instance of someone asking if the card was definitely real or not..or anyone suspecting this to be the issue....(though Im sure there ARE, i didnt find one though..not that I would havee thought it was the case with mine,,,,since I had NO reason to think it WAS fake..what with the perfect packaging, and seller having no neg feedback after selling hundreds of them!).
    Im not some sort of SD card expert..BUT I am pretty up to date with regards consumer tech.....and until Samsung revealed to me I had been conned...I had absolutely no INKLING that the cause of my issues wa a fake card...on no forums did anyone ask the person with the issue 'are you sure your card is real?'.....and I am really coming round to think that these fake cards are RIFE out there on the market....so realistic looking, package and all, that probably otherwise legitimate sellers are trading in them......the KILLER being the fact they do actually work...maybe for MONTHS if it takes you a while to reach its true capacity....and certainly long enough in many cases to mean the nefarious seller gets away scot free!
    So watch out guys...I ceritanly will be in fuiture...Now I know that fake cards are a big thing.....its really easy to spot the fake ones (if the seller uses a REAL picture of the item on the listing!)...they are by no means identical to the real deal when you know what to look for (in the case of fake EVO 64gb like mine, just 'made in Taiwan' and the back being gloss black instead fo white, is enough to show it as fake.....but I did not know that at the time when an absolutely perfect lookng offical Samsung package turned up at my door!....
    Anyone else have this yet? Im sure they have....also, anyone wonder now if the cause of their woes is a fake card? If you would like to post here, Im happy to have a look at it!
    Thanks all!
    (Here is my fake one for you all to see : D...apparently it is a VERY common fake....wish I had known! I also wish i still had the very realistic packaging too!)

    Well to be honest I wasnt aware of such things myself until I got stung.....or  rather not aware that you could follow all the rules, and do everything right, like check for good feedback, (my seller had 1000s positve and 99% ratio....and not buy items that have a price that is 'too good to be true'...........and STILL get ripped off!
    You live and you learn! Ive been shopping online for just about 10 years and this was the VERY FIRST time Ive had a problem of ANY kind!
    I had gotten so confident shopping online, that I bought a pretty valuable watch online not a month ago..my first 'large' online purchase in fact.....a Casio GPW-1000 RAF edition... a quite rare '500 pieces in UK' item. Though it came from a large watch dealer, I realise now that it was still a risk (though I had the protection of paying by Credit Card..which I willl ALWAYS do from now on!)....as they may have sold a counterfiet item, and not actually realised it themselves...
    Since I have had this experience of buying a counterfeit product,, I haev been reading into the phenomena..and it turns out that Casio G Shock watches (the type I spent a fari bit of money on...a legitimate one luckily!) are very heavily counterfeited...and are ALL OVER Ebay....who seems to do nothing about it!
    I can understand (though not condone AT ALL) criminals counterfeiting a sought after watch design, or jewellery and things like that...because they have a market for them, in the shape of people that cant afford the real thing, and think its ok to buy a cheap and poor quality knock off, that only superficially appears to be real.......
    ...but I have to say its a big surprise to me that they would counterfeit something like an SD card, even if it is a quite highly regarded model.......and even go to such effort to copy the packaging perfectly......I think that the fact that so much effort went into faking a Samsung Evo 64gb sd card ..that it demonstrates that there are a LOT of them out there....hundreds of thousands for sure....but could there be millions?
    Due to this prevelance, I think it might well be worth asking each person that comes on the forum with an SD card problem, in particular those with a'new' SD that is losing data, or needs to reformat all the time, or any of the 'giveaway' symptoms...to ask them for an image of the offending article as a starting point.....and to then compare it to images of the real ones that are online...
    Im sure most of them will deny they own a fake....I certainly didnt think for one second my problems were due to a counterfeit card...as I said in my post...the first I knew of it was when Samsung themselves informed me!
    Otherwise we end up going round in circles trying to 'fix the unfixable'..which is what happend to me : D
    Anyway, I will keep an eye out for people on the forum, and a couple of other tech sites I frequent, and see if I can identify any more of these fakes, and hopefully can catch them soon enough that the customers can get their money back, since the problems often dont manifest themselves until the time for immediate refund is passed (once again, this happened to me, and Im having to claim through Paypal..though they are being very helpful...its only £22...but its the principle of the thing!)
    Thanks all, and stay vigilant!

Maybe you are looking for

  • I have an IMac running OSX 10.5.8.

    We have 2 ipads in the house set up using icloud. I cannot see icloud listed on the options on the imac so presume i need to upgrade the system. Is this possible and if so how do i do it?

  • Image Size Problems when printing on Epson printers

    Hello all, Here's what I have- I am running Photoshop CS 5.1 on a new Mac Mini, using OS 10.6. I am up to date on all software updates for both the Mac OS and Adobe. As of two weeks ago, whenver I send an image to print on my Epson 4900 or Epson 4880

  • Forgotten unlock code/froze​n keyboard

    i have forgotten the unlock code for my BB curve 8530. It was freezing up and after hard restart would only go to device locked screen and allow me to switch betwe3en the choices but then would not go to screen i chose. Have downloaded the desktop so

  • What target address does IPM select if the target IPSLA device is a multi-VRF CE?

    What target address does IPM select if the target IPSLA device is a multi-VRF CE? With IPM 4.2.1 it is not possible to select the correct target IP address when configuring a collector between two multi-VRF devices. It looks as if the primary managem

  • =?iso-8859-1?Q?idea_fant=E1stica?=

    Buenas, Ayer he visto este nuevo tipo de anuncio digital basado en un kit (open source, gratuito para uso no comercial) llamado FLARToolKit con AS3. Es una especie de holograma digital interactivo, para hacerlo funcionar se necesita simplemente una w