Qosmio F45-AV413 and HD DVD

Hello everybody,
I'm not shure, but, can I play HD-DVD discs on my Qosmio model?
How I discover this?
Tks,
Marcelo.

Yes you have a HD-DVD drive. After googling a bit around I found some good information. But I think the one and only way to find it out is to put a HD-Disc in your drive and check it out. ;)
Greets

Similar Messages

  • Qosmio F45-AV413 refurbished Showing DMI.exe error while trying to restore

    Here is the problem:
    I formatted the original disc to install Vista in a different language with my own Vista disc.
    After that, I couldn not make some drivers to work properly, so I decided to do a system restore.
    I didnt have the discs so i asked Toshiba for some DVDs. They send them to me and after inserting the discs and choosing Toshiba restore utility from the menu it appears a window saying DMI.exe error and some codes and "memory could not be read" error.
    After I press OK, it appears another window showing this error "03-eeee-0000"
    After I press OK again. The disc is ejected and the computer shut down itself.
    I updated the bios to the last version 1.9 and i changed the ram sticks with other ones that work ok, but the problem persists.
    Searching in Google I read that it maybe something with the DMI from Toshiba, and it is fixed with a DMI update utility, but I did not find one for this laptop. Also I read something about the original MBR that is missed and Toshiba needs it for restoring. I do not think that is correct because I can install whatever OS I want with my laptop and I should restore the original OS when I want.
    So please, I am asking for some help with this problem.
    Thank you in advance.

    Hello
    DMI.exe is part of the recovery process that is checking the hardware to make certain that you are not trying to load your OS to a different machine,
    There is specific Toshiba information inside the Hard Disk so DMI could restore your preactivated version of vista.
    you can install fresh windows vista and use the drivers in this page :
    [Click Here|http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modItemList.jsp?moid=1757693&rpn=PQF43U&ct=D L&BV_SessionID=@@@@1588502434.1220287432@@@@&BV_En gineID=ccceadefddkhiekcgfkceghdgngdgmm.0]

  • Qosmio F45 - DVD and CD ejecting issue

    I have a Toshiba Qosmio F45 and when I got the computer in september it had a problem of not warning to read or write to certain disks.
    Now it's getting worse to the point where when I insert a disk. It spits it out not reading from it at all.
    The drive is a TEAC DV-W28SLCT ATA Device.
    The laptop has windows vista.
    What can I try whether its an update or hardware issue

    Hard to say what this problem causes. Do you have this issue with all media or just a special kind of brands?
    Don't know if this can be corrected by update but have you the latest BIOS version on your notebook?
    Maybe there is something wrong with the loading mechanism of the drive. Check if there is something stuck inside, meaning, to look if you can find something not belonging into ODD.
    But be careful with what you are doing.
    I really would suggest to contact local ASP.

  • Biometrics finger print scanner not working on Qosmio F45 AV411

    Hello,
     I have a Qosmio F45 AV411 that I have just installed Windows 7 32 bit on. This was not an upgrade, but a fresh image on a new hard drive. I have also got all the drivers to work except for the:
    driver_fingerprint_upek_TC00237700A.exe
    I have tried uninstalling and reinstalling as well. Is there software that goes with this device as well? I checked device manager, and it says I have the latest driver.
    Thanks,
    Daniel

    Hi,
    Try downloading and installing the Validity Sensor driver on the link below.
    http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52664.exe
    After the installation has completed, restart the notebook.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Guide: How to rip and convert DVDs or other videos to iPod

    Hi guys, we ofter met problems in using iPod, such as when we meet with a beloved movies we are in trouble to enjoy it on our iPod. Thus I write this document that shows how to rip and convert DVDs or other videos to your iPod MP4.
    1. First of all, please download ImTOO DVD to iPod Converter at http://www.imtoo.com/downloads/dvd-to-ipod-converter.exe
    2. Install it and open your local DVD by clicking "Add DVD Folder" button under "File" menu.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31FZ6oHp3lEKFmPK-hzWXDKecAOVQRzIL6-9KjaiLbyLXfiGo-BqkoGtvlrUMzl4l4jagq2S6z7b7G6KKH 95thyCXsC4EtgTtirQuELGZZxQoSSAxk3UnPd4L85jC3rQcdkQ[/img]
    3. Click “Show Chapters” button to see all the chapters within the file.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31_FZ6oHp3lEKFmO0ylFD2qSpZXP_cqMtscE2WqThpAR5g09Bs9U35fi6b3uUeM6oDO-DPo51IxZo2GUj9o4uxpdpDu6evNlsGOq2moZ5kotKHhcSxiBzDgy2g[/img]
    4. Set output format: In “Profile” drop down list box, you may select output format. The software allows setting different output formats according to different files.
    Tips: by selecting iPod MPEG-4 Movie format (*.mp4) in “Profile” drop down list box, the software will produce iPod mp4 formats.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31_FZ6oHp3lEKFmPreyw1kYwIJpDTwM_a3gQURdsdtZTxYLYSCUkFGAZMv-5kWmqEvM3xV3NJ3QYlkVW0KoPzHuv7ClaSfNQUQaMdyNItZkgZxEW3MO9cilDaA[/img]
    5. Set conversion mode (Optional)
    After selecting certain output format, the right column will show its general standard. By clicking certain settings such as 'Zoom', 'Split', 'Destination' and ‘Title’ etc, you may set it.
    Please note: you can set "Bit Rate" by choosing the rate given, such as "512". Certainly, you can keep all the above options default without any change.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31_FZ6oHp3lEKFmMmPbg0rEpycrO9G5jwgdPpg9yGpkTI0havv96bJT7HYAH4PVu7lR4ESdVkO Ev5u-INctCxDm6iwLDLfadLmHS3bhlcQFwYMy2XIYVRMkGE7OpKq1J7AZy[/img]
    6. Start conversion:
    Finally, selected the chapter you want to convert and start conversion by right-clicking the chapter name and selecting ‘Rip Selected’ under the menu.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31_FZ6oHp3lEKFmMQKrsTLGjo2VB1_Ru7O-P1Wwc1G7tEx9ItpbTAHKre577ymbGupT2zuFu3c e774REhjfFDEHB-6zQ9kZj0dK2dD0wJDYkjW7mU7hNy3FQyrLlkuWYr2mH[/img]
    After a short while, you will get a file that is ready to be played on your iPod. But how do you add it to your iPod? Here is the way:
    1. Please click ‘Open’ button after the conversion is completed.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31_FZ6oHp3lEKFmPzJC1-X4F_jyEtPuPH09CS49w6mepw6jYUOMYuVFkqTUfZxH7VxKkEyNtEH sCDNqJfkmd9ICVL-EUtuvMkBV5bSA7IAxfqO0LT5diei4KmIVxkzBruxVI[/img]
    2. Find the converted file in the destination folder and pull it to your iTunes.
    [img]http://storage.msn.com/x1pbglk-vqL4BtU6DAW1-Bend4LzY31FZ6oHp3lEKFmNiayBbtoinszucPj5wjDWxTlGIqjIo988kyWKXT2NuPu1n0xSCu8yeV6o6N6gJcFFO5Y -MbPi4gw4oCHSH3Nq4pJ0tVcZ60Uf5YIW5xpllwzzouu8JRcnZ[/img]
    If you don’t have an iTunes yet, please download it freely here:
    3. Pull the file list under the iTunes to your iPod. Then you will see the file name under ‘Recently Added’ list of your iPod menus.
      Windows 2000   Windows9x/xp/me

    Thanks! But when I visit the site recently, I found the program was upgraded. Now it has 2 optimized output formats specially made for iPod 30G and 60G players! Thus it is easier and more convenient to use without complex settings as other software. Try it at http://www.imtoo.com/downloads/dvd-to-ipod.converter.exe
    Another good news: there was a new discount suite ImTOO DVD to iPod Suitethat contains both the DVD to iPod Converter and iPod Movie Converter. It saves newly $20! Hope this can do some help

  • I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.

    I bought a used PowerMacPC G5. I can burn and read DVDs, but I can't read or burn CDs. The CDs are not even recognized. After the drive searches for a while, the CD is ejected without any error messages. The CDs work okay on my iMac.
    I am running Mac OSX 10.4.11. According to the System profiler the CD/DVD drive is a "PioneerDVD-RWDVR-112D." When I compare the information under this heading, the only unusual difference from my iMac is that the G5 reads "Burn Support: Yes (Unsupported)." My iMac reads "Burn Support: Yes (Apple Shipping Drive)."
    Under the System Preferences the options are set to "Ask what to do" when a blank CD or DVD is inserted. Music CD set to open iTunes, Picture CD set to open iPhoto, Video DVD set to open DVD player.
    Do you have any suggestions?
    Thanks, Jack

    Hi Jack, great help so far!
    Internal...
    http://eshop.macsales.com/static_pages/Framework.cfm?page=superdrive/sdl_powerma c_g5.html
    External be sure it's Firewire & not Bus powered...
    http://eshop.macsales.com/shop/firewire/optical-drives/

  • Satellite P200-1B6: Sound Driver update fails and HD-DVD Player doesn't work

    I have just bought a Satellite P200-1B6 laptop and spent the day installing the updates recommended by the TEMPO program. One of these was a Sound Driver update from RealTek but on running this it fails about 80% of the way through with an error: 'Install Realtek HD Audio Driver Failure !!'.
    Now the Toshiba HD DVD player fails to start with an error 'Unable to output the video to an external device.
    Please switch your display device by pressing the Fn + F5 keys after ending the application'. I've tried this but it seems to have no effect.
    I'm now regretting starting to update the installed drivers. Should I try to rebuild the machine using the recovery discs or is there another solution that someone has found? Or have others found the upgrade works?
    Any advice welcome

    Last month I upgraded my PC Satellite P200 (BIOS, Driver ATI HD2600, Package VAP and HD-DVD Player).
    But after this update, I was no longer be able to read my HD-DVDs
    Error message was: "Unable to send the video to an external device. Please turn off the display device."
    The problem was much of the update Realtek R1.76 (Realtek Sound Driver - 6.0.1.547 - 20/11/07) currently proposed on the site toshiba.
    Indeed, the P200-1DE is equipped with Realtek ALC268 Audio Codec.
    The latest update of this codec is R1.89. I downloaded from the site Realtek and it has allowed me to solve the problem.
    [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=24&Level= 4&Conn=3&DownTypeID=3&GetDown=false]
    I have no problem since that last update

  • I bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do hlp?

    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook and i installed it sucessfully but now i want to install win 8(64 bit) and i did but unfortunatley that dvd of bootcamp didnt work what should i do to install my bootcamp and apple software in win 8
    thanks in advance,,,

    ahmad_uetlhr09 wrote:
    i bought my macbook pro 13" and i installed win(7 64bit) and the dvd of bootcamp came with my notebook
    Boot Camp does not come on DVD, what did you install.

  • Optical Drive is Reading CDs and DVDs & Writing CDs but not Writing and Erasing DVDs!

    Product Name & Number: Compaq Presario CQ60-101AU
    OS: Windows 7 Ultimate SP1
    Error Msg: Shows Reading Error at the end of burning DVD using Cyberlink Power2Go 5.5, Nero 11, Ashampoo Burning Studio 11
    Description:
    When reading and writing CD+R, everything works perfect. And Reading DVD also working perfect. The problem is while Writing DVD+R, DVD+RW and Erasing DVD+RW. When using burning software or the windows in-built burning, at the end it shows reading error. And While erasing also same problem. In the DVD, there are only some dark circles/lines with gap and doesn't look like normal written DVDs.
    Steps tried out (but in vain)
    1. Used different burners
    2. Used Superblank
    3. Uninstalled and Reinstalled Chipset drivers
    4. Formatted the whole HDD and Reinstalled OS
    Please Help! Actually where is the problem? And how to fix it?
    ** If your problem is solved then Mark this as Answer! **
    ** Please give Kudos If you want to Thank Me! **

    Either go directly to Intel and run their driver finder or use this thread.
     http://forum.notebookreview.com/hp-drivers-software-forum/404164-drivers-hp-dv6-2xxx-dv7-3xxx-dv8-hd...
     The bloat-ware if you want it :
    http://forum.notebookreview.com/hp-drivers-software-forum/519991-popular-hp-notebook-software.html
     Install the Chipset driver first, then the Intel Rapid Storage Technology Driver, the rest doesn't matter.
     Same for the NVIDIA driver, Notebook Review is up to date or you cab go directly to NVIDIA.
     http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
     http://www.geforce.com/drivers
     And the tutorial to do a clean install to W7.
      http://pcsupport.about.com/od/operatingsystems/ss/windows-7-clean-install-part-1.htm
     If you have an upgrade disc, then you can do a clean install as long as there is a Windows OS on the drive.
     I have also done a clean install form an upgrade disc to on a new drive and it still works.
     Glad the MoBo's doing well !    What kills them is if you do allot of gaming, the MoBo can't take the heat. The cooling system just isn't up to the task.

  • How can I boot linux from usb drive and/or dvd drive on a windows 8 laptop please?

    Hi all,
    Could someone describe how to set my windows 8 laptop to boot linux from usb and or dvd drive step by step please? I have HP laptop. Thank you.

    http://www.cisco.com/en/US/prod/collateral/modules/ps6247/prod_qas0900aecd80232483.html
         Q. What sizes of USB Flash sticks are supported?
         A. USB Flash sticks are supported in 64, 128, and 256 MB sizes. No other sizes are supported.
         Q. Can I use any USB memory stick for this application?
         A. No. Only Cisco USB memory sticks are supported.
    Q. Can I boot an image directly from the USB Flash module?
    A. Yes. USB drivers have been added to rommon, starting with version 12.4(13r)
         Q. Can I format the USB Flash module on the router?
    A. Yes. You can format the module on either a router or a PC. You must  specify "FAT16 file system" as the file system for the PC format process  to use.
    If your setup satisfies above conditions you can get the router to boot up with the IOS on the USB flash
    If you are in ROMMON mode, use 'dev' to find out the name of the USB Flash (should be usbflash0).
    set BOOT=usbflash0:
    If you are in the router,
    boot system flash usbflash0:

  • IDVD problem burning and multiplexing - gets stuck but ejects the DVD and the DVD doesn't play

    I am having trouble burning DVDs.  Everything seems to be working fine during the iDVD project creation.  I can watch the movie and select scenes within iDVD.  Then, when I go to burn the DVD, it gets stuck at the burning/multiplexing stage - the wheel just keeps spinning and says there is about a minute left.  Yet it ejects the DVD and the DVD won't play when inserted into a DVD player.  It will show the intro and the scene selection pages but when you click on one of the scenes, it gets stuck and doesn't play.  I have already uninstalled and reinstalled iDVD.  The problem persists.  It seems like the burner itself is the problem.  What can I do to fix it?  I have Mac OS X Version 10.6.8 with a 2.8 GHzintel Core 2 Duo and iDVD version 7.0.4.

    Hi
    Multiplexing error is a very complex problem due to many things (long long list following) - one common but not obvious reason is that material on the iDVD menu goes outside the TV-Safe area (or just touching it).
    So first - turn on TV-Safe area and move any object well inside of this.
    Wide screen stretched - usually (as I think) it is due to making a 4x3 movie in a 16x9 wide-screen project OR the other way around. This forces one to on flat-screen TV (or other) set the presenting view right - My has 4x3, wide-screen, zoom and auto-wide-screen and I have to switch this by my remote for some DVD I've made "wrong" way.
    Now my long long list on Multiplex Error
    LONG LONG LONG LIST
    Multiplexing Error
    PART One.
    Use of strange video/audio material e.g. .avi, .wmv, .mp3 etc.
    I only use.
    Video - StreamingDV (miniDV tape via FireWire) and
    Audio - .aiff (as on audio-CDs) (else converted to this .aiff 48KHz)
    Photo - .jpg (.bmp known problematic)
    Chapters !
    A.    Using strange letters in video project name e.g. +,/; etc. keep to a-z and 0-9 strange letters in project name e.g. +
    as described by Donnyboy69.  Does the title of your project have any symbols or decimal points in it. If so, that is why you are getting the error. I had a project that had a + sign which caused the same problem. I renamed it without the symbol and low and behold, it worked.
    B.    Location of Chapters
    • Can’t be at start or end of movie (Skip first/start one - iDVD sets this by it self. At the End - no need)
    • Not in a transition (or within 2-3 seconds from it)
    Important when from iMovie HD6 or previous - Now also observed when using FCE 4
    PART Two.
    from Robert Modero.
    "Multiplexing Error. Problem during initialization of tracks"
    Simply remember to add subtitles to your Quicktime files and menu buttons.
    Once I did that, I was back in business.
    from Boise Jim
    Do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    I always makes a DiskImage first and test this so that it runs OK
    I use only - Verbatim DVDs
    I use only - DVD-R
    I burn at an as slow speed possibly e.g. x1
    This gives good DVDs
    PART Three.
    Multiplex Error
    Chuck, Chicago 2/7/2009.
    Back again. Here is what I have found to work. I also have and use a LaCie DVD-R/RW DL external drive and a LaCie external hard drive as well. Since yesterday I have tried a few ways to burn a themed iDVD project having four 56 minute movies on it, amounting to 226 minutes onto a DVD DL disc, capacity 240 minutes. Apple tech support really didn't know what to do but gave me a very good tip. I had two options left. Apple tech support's tip was to try disc image. One of the replies on a thread with this subject said not to, but my experience today is good. Put your project onto "Burn to disc image," under "iDVD, file." Yesterday encoding took me 23 1/2 hours. Overnight for iDVD disc image, encoding took 21 1/2 hours (again) while I slept. This morning I tried to copy/burn disc image to a DVD with Roxio Toast 7, and it stopped near the end of the burn with some kind of "error" message. So then I tried Utilities> Disc Utility> Burn icon, and followed it through. Be sure to click the DVD DL drive in the window "Burn disc in.". I had one other problem though. At the end of a 46 minute copy, it started to verify, and at the end of verify it rejected the burn. So I tried again, and when "verify" appeared, I clicked on "Skip." The disc finished burning and is doing fine and well. A long and tortuous process, but at last something works. I made several additional copies using Disc Utility. Best wishes. Chuck, Chicago.
    2. Disconnect any other external devices not absolutely needed.
    e.g. external USB/USB2 hard disks, other FW hard disks etc.
    3 Chapter marks in transitions - minimum 2 sec from
    FROM Bev.
    (Not a 'guy' but I will answer!)
    First, I do not think that mixing wide-screen and standard makes a difference in iDVD.
    Second, you should use a better brand of DVD disk. Also, many of us have experienced fewer problems on playback with DVD-R disks. Recommended brands here are Verbatim, Maxell and Taiyo Yuden. Memorex and TDK are not consistent and may not give you a correct burn. They apparently have fewer layers in the composition of the disk. I have always used Verbatim DVD-R disks and have not had any burn problems.
    Also, choose a slower burn speed, 4x or less.
    Third, to determine if the iDVD project will burn properly, create a disk image file (from within iDVD, go File->Save as Disk Image) and test it. Mount the disk image and then open DVD Player (in Applications) and view your project. If it plays correctly, you can then burn the actual DVD disk from the disk image file using Disk Utility.
    From. Boise, Idaho
    I did everything I've seen suggested, but a friend (who used to be an Apple Genius) suggested that I do a safe reboot (by holding down the shift key until you see the spinning gear on gray background, then release, then restart when your start-up screen appears).
    It worked, and I got a clean burn from iDVD.
    Hopefully this can help other people.
    by dheb0422
    Well, I finally got it, and it was odd enough to post here incase anyone looks this topic up again. Many things were tried, including burning the unedited film, the edited film without titles and chapter markers, abbreviating the chapter markers in case length was the issue (remember the old iMovie used to truncate them when moving to iDVD?). In the process, I noticed that one, and only one, chapter marker was on the same line as the title marker. All the others were on the line above. The only way I seemed able to change that was to clip a few seconds of film. After that last clip, the offending marker took a place on the line above, as were all the others. That run published, compiled completely and burned. That's one for the books.
    One user more writes
    To add my experience with Multiplex Errors using iDVD (7.0.4), I recently created two iDVD projects
    Video from both passed from FCE 4.01 with chapters
    One project worked fine in creating disk image file
    The other gave Multiplex Errors
    I tried suggestions to remove special characters and no chapter marks at beginning, but nothing worked
    Note that I've used iDVD for dozens of projects and this is first time I've run into Multiplex Errors
    Anyway, for problem project, I tried an experiment where I removed all chapters in FCE and passed to new iDVD project
    This time multiplex errors gone
    So had something to do with chapters
    So now I tried numerous experiments to remove individual chapters and try again creating disk image with new iDVD project
    After numerous tries, I was able to narrow problem down to 1 "Bad" chapter mark
    That is, when I left the "bad" chapter in my FCE project and passed to iDVD, iDVD gave multiplex error
    When I removed "bad" chapter mark (and others in), no multiplex error
    As a final experiment, I moved "bad" chapter mark about 5-10 sec's beyond original point and passed to iDVD, the multiplex errors now magically went away and I was able to finally create my disk image.
    I have no idea why this worked, but thought I'd mention here in case someone else runs into similar problem.
    Rich839
    In addition to Bengt's fine advice, burning errors can occur if you have located any of your menu buttons wholly or partly outside of the safe TV viewing area. Go to your main project menu, then click on View/Show TV Safe Area, to check. Drag into the safe viewing area any buttons that are outside the safe viewing area.
    Russ One - suggest this
    Multiplex Error-There was an error during muxing preparation
    One thing that worked for me was to export the video w/o chapter markers as a self contained movie (thereby not loosing the edits & etc). Then make a new FCE project and import that movie into a new sequence and add the chapter markers. I've used "-", "&" and "," with no problem in the chapter names. Removing the markers or exporting without them did solve the problem but renaming them with just numbers 1,2,3....5, did not solve the problem and since this problem seems to happen with with iMovie as well, it would suggest the problem is in the video or audio and in combination with the chapter markers iDVD just can't handle it. The only other possibility is that both iMovie and FCE share the same or similar chapter marker code that some how is corrupting the markers.
    Summary - What to try
    1. Chapters
    • Only A to Z and 0 to 9 in chapter title
    • No Chapter mark at very beginning of movie
    • No Chapter mark in or within 2 seconds from any transition in movie
    2. TV-safe area for buttons (no one outside this)
    3. Safe re-boot
    4. No other external devices connected - that are not needed
    SDMacuser adds to this
    • On #4 ... No ext. devices. Some think this applies mainly to ext. FW. Not the case. Also applies to ext. USB2 as well (not to mention flash drives too).
    Do not leave 3rd party devices / camera / camcorder plugged in unless it is being used with iDvd's One Step process. Certain web cams can trigger this also (especially ones with added features like LED light/s that draw additional power from the FW or USB bus).
    5. Minimum of 25Gb free space on Start-up hard disk
    6. Make a DiskImage first - reduces where problem originates
    7. Trash iDVD pref. file
    8. Make a new iDVD project
    9. Movies in project with same aspect ratio e.g. 4x3 or 16x9
    10. No other programs/applications running during iDVD process. e.g. Internet, screen & energy savers
    Yours Bengt W

  • HT3910 Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

    Original OSX 10.5.6 and app dvd's (that came w/MBP) lost,and have recv'd replacement dvd from Apple. Once hard drive is erased and new OS w/dvd instl'd, how do I insure all applications bundle - that came with MBP - will reinstall?

    Your profile says you have 10.6, so why bother with the original 10.5 OS?
    But to your question, before you erase anything, make a backup of your data for safe keeping and restoration. Having an external hard drive for this purpose is most useful.

  • K3b, filesystems and a dvd player

    Hi!
    Im using k3b to burn a dvd with 6 movies... just one have less than 31 characters, and the subtitles .srt for it works ok
    but the other 5 have more than 31 characters, and my dvd player do not "join" the video file with the .srt file... so, I have no subtitles there...
    (I do not know why... if the player trim the video name file, and the srt name file... its the same "combination" at the end...)
    I tried a lot of system files combinations, and none of them works at all
    well I can rename all files to 31 characters or les... but... why?
    (I have burned things like this in windows, and worked ok)
    Any idea?

    I tried that... the joliet setting?
    And I tried the allow 31 and 37 characters iso9660 (marked and unmarked)
    I tried creating .tbl table
    I tried generating udf structure...
    and always the same problem

  • IDVD and External DVD burner

    I'm currently working on a DVD for a wedding scheduled for Saturday. The DVD works great on the Mac and PC, however, when attempt to play it in a DVD player playing to a TV the music is choppy during the transitions (dropplet). By the way, my superdrive has a 2x burner.
    Thinking that it might be the slow DVD, I purchased a LaCie external DVD but now can not get iDVD to recognize the LaCie burner.
    Any suggestions on either issue???

    Thanks for the help. I was able to get iDVD to recognize the new DVD hardware by simply loading a new DVD into the drive and responding to the question screen concerning what to do with the blank DVD. I was also able to burn the project and make it work with a computer and two DVD players that I have access to. Unfortunately, the brides parent's DVD player basically stops playing the music during the waterdrop transitions I was able to drop the transition and burn a new DVD and all worked fine.
    Sorry, I was just panicking before the big day.
    Thanks again.

  • I have an IMAC and the DVD player will not accept DVD's.  As they are inserted, they are immediately ejected.

    I have an IMAC (OS X 10.7.5) and the DVD player will not accept DVD's.  As they are inserted, they are immediately ejected. How do I fix this?

    try resetting the System Management Controller (SMC).

Maybe you are looking for