Qosmio F50-111: Control buttons stopped working using VMWARE Workstation

Hi,
Since Ive installed VMWARE Workstation v6.0.3, my touch buttons (play, pause, stop, media center, next, previous, mute, and light, webcam, and dolby) stopped working.
So Ive chosen to restore my Vista before the installation on my VMWARE. It works my buttons work again...
BUT I need to install this software (vmware) for my job use.
I've already tried to remove and install then new Value Added Package from Toshiba Website, but it doesn't work.
Please help me
It mean that the applications (in the TBS folder, like TDspBtn.exe, TBSbtnSt.exe,...) start running but stop immediately.
Thank's for your comming help

I tried to disable VMware services but it didn't solve the problem but I found something interesting.
I opened the windows Event Viewer and in Windows logs > System I saw that for each boot of the PC there is a log about TBS, Toshiba Button Support which says:
"Aucun périphérique de sécurité du module de plateforme sécurisée compatible trouvé sur cet ordinateur. Impossible de démarrer les services de base de module de plateforme sécurisée."
I don't know the english message but it's something like no compatible device of security of safety platform found on this computer. Unable to start The base services of the module of safety platform.
I hope this with help us and Toshiba to find where does this incompatibility comes from.
* System
- Provider
[ Name|http://forums.computers.toshiba-europe.com/forums/] Microsoft-Windows-TBS
[ Guid|http://forums.computers.toshiba-europe.com/forums/] {51480c1a-90aa-416e-98fd-4c11f735349b}
EventID 537
Version 0
Level 4
Task 0
Opcode 0
Keywords 0x8000000000000000
- TimeCreated
[ SystemTime|http://forums.computers.toshiba-europe.com/forums/] 2009-01-04T03:54:49.807Z
EventRecordID 32303
Correlation
- Execution
[ ProcessID|http://forums.computers.toshiba-europe.com/forums/] 1100
[ ThreadID|http://forums.computers.toshiba-europe.com/forums/] 4324
Channel System
Computer JCLB-X300-126
- Security
[ UserID|http://forums.computers.toshiba-europe.com/forums/] S-1-5-19
EventData
now in XML
* <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
* <System>
<Provider Name="Microsoft-Windows-TBS" Guid="{51480c1a-90aa-416e-98fd-4c11f735349b}" />
<EventID>537</EventID>
<Version>0</Version>
<Level>4</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2009-01-04T03:54:49.807Z" />
<EventRecordID>32303</EventRecordID>
<Correlation />
<Execution ProcessID="1100" ThreadID="4324" />
<Channel>System</Channel>
<Computer>JCLB-X300-126</Computer>
<Security UserID="S-1-5-19" />
</System>
<EventData />
</Event>

Similar Messages

  • The silent/ringer switch and the volume control buttons stopped working, how can I fix this or do I just need to get a new phone?

    One day I relalized that the silent/ringer switch on my iPhone 4 stopped working. My phone is permently silent and I can't turn the ringer on. The speakers still work so they aren't the problem. Also, the volume controls on the side don't work either. Is this problem fixable or do I need to get a new phone?

    you can try the restore first to make sure it is nothing software related. makesure to back up information and restore as new. after that it is hardware if your with in the limited hardware warranty and can be replaced for free if you are not then it can be replaced for 149$ if it is a iphone 4 or lower

  • My home button stop working. what to do?

    Hello,
    i have an ipad2. Suddenly, the home button stop working. Someone could help me please?

    This requires the use of the home button, but try it anyway.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    If that doesn't work, try this. Calibrate the home button
    1. Open a stock iOS app, such as Contacts
    2. Press & hold the sleep/wake button at the top of your device until the red slider control appears.
    3. Immediately release the sleep/wake button and press & hold the home button. Hold until the red slider disappears.

  • Brightness control keys stop working after booting MacOSX

    I bought a new iMac 27" a couple of weeks ago, and I installed Windows 7 using bootcamp.
    All the control keys (brightness, volume, etc) works ok on Windows until I reboot it in MacOSX. When i start windows again, brightness controls keys stops working, leaving the screen with the maximus bright, which is killing my eyes.
    Reparing boot camp drivers doesn't do the trick. Am I missing something?

    Try fn + the controls. It might be that Windows defaulted to those buttons as F1, F2, etc. Using fn while pressing the buttons will 'tell' Windows that it has to listen to the Bootcamp software and lower the brightness.

  • Satellite A300-15K - 2 multimedia buttons stopped working

    Hi.
    I have a problem, first 2 of my multimedia buttons stopped working..
    i tried uninstalling few times but it didnt help.
    I don't have also nothing to choose in the list at
    Toshiba Assist -> Optimize -> Toshiba Button Support.
    I need help. ( there was 2 positions before.)

    Hello guys
    Can you please stop crying here and maybe tell us what is wrong there?
    Dear J3... what are you writing about. Which Os do you use? Which drivers? What kind of error?
    Multimedia buttons are not controlled by drivers. What things you already tried?
    Hay metalbullet, the same questions for you - What order, which OS? Sorry but you didnt offer any relevant information.
    Have you tried with VAP as suggested by Akuma?

  • My iphone home button stopped working and the phone started getting hot. The camera also fogged up. What do I do?

    My iphone home button stopped working and the phone started getting hot. The camera also fogged up. What do I do?

    I'm guessing it's a hardware problem. Your best option is to go to an Apple Store as soon as you can to try and sort this all out. While you're waiting to go visit an Apple Store, however, I'd imagine you still want to use your phone. To circumvent your hardware button problems, try enabling Assistive Touch by going to Settings>General>Accesibility>Assistive Touch. You'll see a small box appear on your screen. Tapping it will bring up several options for you to choose from, like the home button. Clicking the "Device" option will give you several options for controlling your phone that you would normally use hardware buttons for (i.e. volume, lock your phone, etc.) Hope this helps and good luck!

  • Catalyst control center stopped working

    HP Pavilion HPE h8-1287c
    Video card Radeon HD 7450
    Windows 7 64-bit
    Error message "Catalyst Control Center stopped working......."
    Two monitors connected, HPw2408h and TV. HP monitor is connected using DVI and the TV using HDMI.
    The issue is that when the pc starts things run fine. WhenI want to have the sound to the TV I switch the Sound Playback to AMD HDMI Output and the TV now has the sound. After a while I will get an error message "Catalyst Control Center stopped working.......". When Sound Playback is opened the AMD HDMI Output is no longer working and has a red arrow pointing down and it indicates the AMD HDMI Output is "not plugged in".
    I have download the latest drivers and still have the same results.
    What is needed to correct the issue? 

    Hello insco6750,
    When you updated the drivers did you install over top of existing software or uninstall beforehand?
    First we should try ripping everything ATI off of the system, including software, drivers and CCC. You should be able to uninstall everything through Add/remove programs.
    After you remove everything reboot and let windows reinstall it's own drivers and software. You don't need CCC to do dual monitors so we can do testing without it.
    Once you let windows install see if your HDMI output no longer works when you switch to the TV.
    Post back your results after completing this.
    If I have helped you in any way click the Kudos button to say Thanks.
    The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
    - Friendship is magical.

  • My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    My iphone 4 wont turn on after hours of charging, normally i would press the lock button and home button together but my lock button stopped working afue weeks ago. Help!

    Hello Kimbo1991,
    It sounds like your phone is not successfully booting even though you have reset the device. I would next recommend attempting a backup and restore to iTunes with this article:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    If you are unable to restore with iTunes I would next put the device into recovery mode, and attempt the restore again:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thank you for using Apple Support Communities.
    Regards,
    Sterling

  • I dropped my Iphone in water and the on/off button stopped working, how do I fix it?

    I dropped my phone in some water and it was only in there for about two or three seconds. I grabbed it and dried it straight away and made sure to get in all of it, and it was fine, everything worked. But about an hour after the on/off button stopped working, so i have to use the home button to unlock it and have to wait for the screen to turn off after 1 minute of leaving it. I cant turn it off and dont know how to fix it. Will it go away on its own, do I have to send it off to get fixed? This literally happened like two hours ago, and my phone is a bit more than a year old. Can anyone help me?

    Make an app;ointment at the genius bar and take your credit card. You can get an out of warrnty replacement for an iPhone 4 for $149.
    If you had just done it, the advice would have been to shut it off and put it in a bowl or bag of uncooked rice or silica gel for a week.  Unfortunately, since it's been powered on for several hours, since then, it may have been permanently damaged. You can try the rice trick, but be prepared to pay for a replacement at some point down the road.

  • IPad mini home button stopped working

    My sons mini iPad home button stopped working. He opted to switch to thee "excessive touch" button to allow him to use it.
    Is there aw nay to fix this? It was purchased last January
    Thanks

    Home button not working or unresponsive, fix
    http://appletoolbox.com/2013/04/home-button-not-working-or-unresponsive-fix/
    Fixing an iPad Home Button
    http://tinyurl.com/om6rd6u
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    It's still covered by Apple's 1 year warranty. Take it to an Apple Store for evaluation.
    Make a Genius Bar Reservation
    http://www.apple.com/retail/geniusbar/
     Cheers, Tom

  • My back button stopped working, so how to fix it?

    The back button stopped working. I can still use the keyboard substitute though. I have tried deleting places.sqlite and resetting some of the settings people suggested in config:about. Nothing has worked.

    You can try a clean reinstall and delete the Firefox program folder before reinstalling a fresh copy of Firefox.
    *C:\Program Files\Mozilla Firefox\
    *http://kb.mozillazine.org/Installation_directory
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 17.0.x: http://www.mozilla.org/en-US/firefox/all.html
    Uninstall your current Firefox version, if possible, to cleanup the Windows registry and settings in security software.
    *Do NOT remove personal data when you uninstall your current Firefox version, because all profile folders will be removed and you will also lose your personal data like bookmarks and passwords from profiles of other Firefox versions.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    *It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    *http://kb.mozillazine.org/Uninstalling_Firefox
    Your bookmarks and other profile data are stored in the Firefox Profile Folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
    If you keep having problems then also create a new profile.
    *http://kb.mozillazine.org/Profile_folder_-_Firefox
    *http://kb.mozillazine.org/Profile_backup
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • Dv6-1240us quick launch buttons stopped working

    Hi,
        I have dv6-1240us notebook pc. After installing some of the updates quick lauch buttons stopped working on my notebook.  Nothing happens when I touch the volume control/mute button.
    Does anyone has idea how to resolve this problem.
    Thanks in advance.
    Nandkishor

    Same thing with my dv6, just the audio button.. wireless is ok. chatted with HP they said hard-reset it, update the driver, update bios. nothing worked.

  • "Tab" and "four" buttons stopped working

    Hi,
    I was using my computer, a black Macbook bought in summer 2006, and suddenly the "tab" button and the number "four" button stopped working. Don't think I pressed anything unusual, was just on safari, and all the other numbers work, and num lock is not on. help... plz?!

    Hi, I ran software update and then restarted, that seemed to do the trick! I was in a a panic for a little while there tho, things have been going wrong pretty often with this computer so i was thinking it was done for... anyways, thanks for the quick reply and suggestions!!!

  • Why did add a new tab button stop working ? it doesn't work any more

    Firefox was normal until the add new tab button stopped working I tried to find out why that happened but I couldn’t I tried fixing it , uninstalling it then installing it and other things but nothing seems to work '''please I need help'''

    This is normally caused by the Ask toolbar, uninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
    There are a couple of places to check for the Ask toolbar:
    * Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
    * Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons

  • Miro's power button stopped working

    Suddenly my phone's power button stopped working. I can't lock/unlock the phone nor turn it off :/ Tried to take a screen shot, to restart the device but nothing happened. I dropped the phone only once or twice before months, it hasn't been in touch with water and such. Now I almost can't use my phone unless when I put the phone on charger Did anyone have the same problem? What should I do?

    Haven't heard of this before actually. I would recommend that you send this phone to a service center for repair. Contact your local Xperia Support for more information:http://www.sonymobile.com/global-en/support/contact-us/What are your thoughts about this forum? Let us know by doing this short survey.

Maybe you are looking for

  • Help is not working in IDES

    Hi Friends, I am working on IDES Server, in that Help (F1) is not working.  When i try to click F1 system is opening the popup and showing the following message- The page cannot be displayed Plz help Regards Goutham

  • Fact sheet configuration

    Hello Experts, I am tring to configuration factsheet in portal. I don't want to use BW iview for that i just want to show the lead and activities for the Business partner. I am not using the standard role provided in Business package. I have same cus

  • Account 790000 already used in transaction BSX  Message no. F4803 in  OBYC

    Hi Experts, I want to change the GL Accounts of Transaction Key " AUM - Expense/revenue from stock transfer " in Tcode OBYC with same as GL Account of Transaction Key "BSX - Inventory Posting". When trying to change GL accounts for "AUM" Transaction

  • Can you sort events differently

    I have 40,000 pictures in about 800 events. Some events I like to see in order of their titles, like an event that has 1200 pictures scanned in, where the date is irrelevant. Others I like by date, such as the progress on a car restoration. Is their

  • Restore single photo with time machine

    I have iPhoto '09, and Snow Leopard.  According to: http://pondini.org/TM/15.html , I should be able to restore a single photo from my backup drive using Time Machine.  Suggested procedure according to the web site is as follows:  start iPhoto, start