Qosmio F50-125 - How to use TV-FM Tuner in Windows 7

Hello,
I am using Qosmio F50-125 and I just upgraded to Windows 7.
I just now found out that I have a TV tuner on my notebook and I dont know how to use it.
First I dont have drivers for my TV tuner and tried to download something like TV-tuner driver v.2.3.3.31 from the toshiba website, but there is not a typical setup.exe but just some files inside.
If you could tell me a bit more about how to use my TV option and how to install the proper drivers I would be truly grateful.
Thanks in advance!

Hi mate,
Friend of me has also Qosmio F50 with TV Tuner and Windows 7 now. As far as I know the posted instructions from the other users are correct.
First you have to extract all files. Then go in device manager and right click on the TV card (I think its marked with yellow exclamation mark). If you right click choose Update Driver and in next windows choose the advanced installation (second point). Now you have to choose the driver directory yourself and navigate to the folder where you have extracted the files. Click on OK, Next, etc. and the driver should be installed properly.
Maybe you to restart the notebook but this shouldnt be a problem! ;)
If you have more questions, please let us know! If you need more assistance I can ask my friend again for further details.

Similar Messages

  • How to use dual monitor display in windows 7 using MSTSC command.......??????

    how to use dual monitor display in windows 7 using MSTSC command ....?????

    Hi Anurag,
    The main issue is how to use the dual monitor in the Remote Desktop Session in Windows 7 ,right ?
    please refer to the following links:
    Using Multiple Monitors in Remote Desktop Session
    http://blogs.msdn.com/b/rds/archive/2009/07/01/using-multiple-monitors-in-remote-desktop-session.aspx
    Best regards

  • How to use adobe 5.0 on windows 7 to install 2 upgrades.

    how to use adobe 5.0 on windows 7 to install 2 upgrades.

    Keith you maybe facing an issue with trying to install Photoshop CS2 on Windows 7 in general.  If you have both serial numbers registered, and one of them is a full version, then you can request that your software be unlocked to allow for installation.  Our support team will better be able to determine your eligibility for this.  You can contact them via chat at http://adobe.ly/yxj0t6.

  • I had nokia n8 and now i want to transfer my contacts from nokia to my new i phone 5, i set up i tune and i cloud account but i don't know how to use do it. i have windows 7 and no outlook

    i had nokia n8 and now i want to transfer my contacts from nokia to my new i phone 5, i set up i tune and i cloud account but i don't know how to use do it. i have windows 7 and no outlook

    If I wiped my phone I wouldn't have the contacts on my phone to send to my self.    I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

  • HT1382 How to use the i-tunes to backup my iphone apps, thanks

    How to use the i-tunes to backup my iphone apps, thanks

    Plug the iPhone into the computer.
    From the Summary tab, select the option to backup to iTunes on the computer.
    Sync.

  • Qosmio F50-10M: how to deactivate touchpad?

    Hello guys,
    usually I use a USB driven mouse to operate Win7. While writing text I often get in contact with the touch pad unwanted.
    As I cannot identify the appropriate device within the hardware manager I am not able to deactive the touchpad while using the mouse.
    There a lot of HID (Human Interface Devices) without a unique identifier.
    How can I deactivate the touch pad or is there a way of deactivating automatically while plugging the USB mouse?
    Thank you for your help!
    Yours,
    Starmind

    Dear Xardas,
    thank your for your answer.
    Unfortunately, there is no Synaptics driver shown in control panel which could be removed. How can I do this?
    The only driver recognized by the system seems to be the Alps Electric driver.
    Did you test using the VAP from the Satellite L500 on a Qosmio F50? Checking downloads on that model there pops up a lot of different types (of that model), for example L500-ST2521, L500-ST2522 and so forth. What version could work proper for my Qosmio F50-10M?
    Checking possible downloads for TVAP and Windows7 64bit there are six different downloads offered. For instance there two different download links for version v1.2.27_64 same size of file named "Toshiba Value Added Package for Windows 7/Vista (64).
    Then there is
    "Toshiba Value Added Package for Windows 7 (64) v1.2.26_64;10-07-2009"
    Which are the differences of those files?
    Couldnt I install one of those files? If so what file should I choose?
    Your help and your answer is highly appreciated.
    Yours,
    Starmind_1
    Message was edited by: Starmind_1 because of new data

  • Qosmio F50-10K - How to get Vista 64Bit from Toshiba

    Hello,
    Few days ago I bought Qosmio F50-10K but with Vista Ultimate 32 Bit.
    It doesn't satisfy me
    Does anybody know, how can I get Vista Ultimate 64 Bit from Toshiba?
    This version was developed for Poland, but in this country there is no Representative Offices or something like this. There are only distributors or shops which import laptops from foreign distributors.

    Isnt it funny that some notebooks from different manufacturers are not equipped with any Operating Systems?
    You got a Vista 32bit of course it would be better if everyone could choose the OS which is the best for everyone but fact is that computer manufacturers sell the own products with the most popular OS and 32bit is more popular as 64bit OS due to compatibility with other 3rd party software.
    Bye

  • Qosmio F30-127: How to use SD card - no SD card drive icon

    Could some one tell how to use SD in F30-127.
    I was trying to get picture from my SD card.
    I inserted into slot but no Drive ICON was displayed

    Hmmm. Please check if the SD card slot was recognized in the device manager.
    There should be no yellow exclamation mark!
    Other hint;
    - Remove the SD card from the slot
    - Go to the device manager and remove the SD card controller
    - Now reboot the notebook
    - After new reboot the windows should recognize and install a new hardware. This is a SD card controller.
    - Now try to insert the SD card again!
    By the way; did you use the compatible SD card size?

  • How can I use the FM tuner in Windows Media Center?

    Hi everyone.
    New to the threads.
    Found this site while looking for answers to a problem I'm having. ?:|
    I received my Toshiba Satellite computer as a Christmas gift. I noticed it has a cool FM tuner feature.
    I also have been playing around with Windows Media Center.
    However, I cannot figure out how to operate the FM tuner inside WMC....?
    I added the NXP FM tuner program to the "extras" on WMC, but instead of opening up the tuner inside WMC it just opens the separate program.
    Does anyone know how I can use the FM tuner (or a different one perhaps?) inside WMC?
    Thank you! :)

    Hello
    I don't have any experience with this because my Satellite doesnt have FM Tuner but nice discussion about it you can find under
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=138027
    If you will find final solution it will be nice if you can describe own experience with it. It can be useful for other people here.
    Bye and good luck!

  • How do use startdard function key in windows?

    I found out from the internet how to use function keys without pressing Fn key by configuring preference. However I need to do the same thing in windows (I am running windows XP on the same laptop).
    Anyone knows how to? I can not figure it out.

    Have you installed all the necessary Boot Camp drivers for Windows?

  • How to use Remote Desktop Service in Windows Azure

    Good day
    Hi! im kinda newbie when it comes to windows azure, I would like to ask if how can we use the RDS CAL in windows azure?

    Hi,
    Please visit the URL below for detailed instructions on using/configuring RDS CAL.
    http://blogs.technet.com/b/keithmayer/archive/2013/09/04/step-by-step-remote-desktop-services-on-windows-azure-a-cost-effective-alternative-to-desktop-as-a-service-part-2.aspx
    Regards

  • How to use the FP 3000 with windows XP?

    Hi to all,
    Actually I have a problem using My FP-3000 nifbus with a windows xp proffetional station.
    previously I was using it with nifbus configurator and communication manager, both of version 2.3 and then I upgraded to 2.3.6 (using windows 2000) and now I am trying to use it with windows xp, but the configurator does not communicate with fp-3000 and it doesn't show any function blocks.
    I started by installing the 2.3 configurator and manager, but the PCMCIA fbus/2 card that I'm using was not recognised by windows.
    so I upgraded to 2.3.6, the pcmcia card was now recognised by windows but the communication manager kept giving a communication error.
    so I installed the communication manager version 3.0, which started successfu
    lly and the configurator started but the fp-3000 was not present.
    I tried updating the firmware, but the upgrade.exe did not disfunctioned and gave strange module names in the window, and it did not download the firmware.
    I also tried resetting the fp-3000 but still no luck.
    so any one can tell me what software and what versions should I use to overcome this problem?

    It sounds like a problem of advanced network parameter settings.
    You can start "Interface Configuration Utility", choose the port and select "Edit", then choose "Advanced..." button to have "Advanced Stack Configuration" dialog.
    Change values to:
    T1 0x40000,
    T2 0x40000,
    T3 0x30000,
    Slot Time 5
    Click OK to close "Interface Configuration Utility", and run NI-FBUS CM or Configurator to check whether it helps.
    If you have 3.0 or 3.1 version, you just choose the "Old Default" button to set the values automatically.

  • Qosmio G35-av600: How to use the internal display as a monitor using composite-in?

    I want to hook up my video game system and use my laptop monitor, but I can not figure out how to change the settings so that my monitor displays the video game? Composite in settings?
    I have a G35-av600 purchased last june. If anyone has any suggestions, let me know

    Hi
    Im not sure if I can help you because I know only something about the Qosmio G10 and G20 and your Qosmio seems to be a US notebook but I will try my best ;)
    On the Qosmio G10 for example you have to change the input settings in the Toshiba picture enhancement utility but I assume you dont have this tool preinstalled.
    But I think the composite in is a right jack to built the connection with the game station.
    I think in the Advanced graphic card settings you should be able to find the right options.
    Play a little bit with this settings.

  • Qosmio F30-140 - How to use Flash USB boot option?

    Dears,
    After I update my laptop BIOS, when I start my laptop I find new boot method, it is from Flash USB ?:| How can I use it and what type of file must be in it? I mean .iso or what?
    Thanks

    Hi
    I dont have Qosmio F30 so I cant test it for you but I think this options means that you can boot from an USB stick for example. Have you checked this?
    You cant boot from an iso file because you must create a bootable media. For example a Windows start disc or a Linux version that you can boot from USB stick.

  • Qosmio G50/402 - How to use 8GB RAM?

    I have Qosmio G50/402 with 8GB RAM installed although the useable is only 4GB.
    Is there any way to use the 8GB?

    Hello
    This can have different reasons.
    Firstly you have to check if your notebook supports 8GB RAM. Check the specifications of your chipset but as far as I know Qosmio G50 should support 8GB RAM.
    Furthermore it would be interesting to know what OS you have. To use full 8GB RAM you have to use a 64bit OS.
    And what type of modules you are using exactly? In worst case the new module isnt compatible with your notebook. Normally the best option is using two identical modules from one manufacture, e. g. Kingston. I have very good experience with these RAM modules for notebooks so I can really recommend it.
    Greets

Maybe you are looking for