Qosmio F50 - How do I bring the Fn-Keys and Hotkeys to work on Windows XP?

Hello.
I downgraded my Qosmio F50-137 to XP, found every driver needed for hardware recognition, but am still looking for the Fn-Keys and Hotkeys to work.
I know (or at least think) that I have to install the "Toshiba Hotkey Utility".
But this utility needs the "Toshiba common module" for Windows XP to be installed.
I fond on the web two common modules for Windows XP:
common_modules_2489A
and
common_modules_24895A
The first one says "This software utility does not support this system.Installation will be terminated"
The second one says "TVALZ driver installation has failed"
How can I make the installation work properly? or How can I make the Fn-Keys and Hotkeys work on my F-50 ?
Thank you in advance
Camusensei

Ok sorry for not answering the questions but I have to find a webpage to answer a few things...
{quote:title=I said:}I've found the XP drivers of other components for my computer on the Toshiba European driver page {quote}
But I'm not sure it was there, since going there and trying to find the page again drove me to the normal driver page.
I'm asking your help me finding the page where:
- You choose your computer in a column by type and then the next column apperar (on it's right), until you have selected your computer, and a button "choose now" appear.
- When you click this last button, you land in a page where you have more drivers than in the normal driver page of toshiba (for me I had the option of Windows XP, while I don't have it on the normal page)
- I'm preety sure it was on the toshiba-website, but I don't remember how to find this page again... And since I already formatted...
I'll continue looking if I can find it again, if someone knows this page, please tell me/us...
thank you in advance.
{Edit:}
YESSS
Sorry just to edit my message I don't want to double-post.
Please stop searching, this is it :
http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp#
if this website can help some people, then it's great. i'm preparing my next message...
{/edit}
Message was edited by: Camusensei (90 minutes later)
{Edit2:}
By the way, I don't find my X300-145 on this website...
Only X305-computers referenced in the X-series, does any know why?
{/edit}
Message was edited by: Camusensei

Similar Messages

  • How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V

    How the sound - microphone - and bluetooth devices works in Windows 8.1 Client Hyper-V
    I would like to get some resources about detailed information on the subject above.
    Any help would be greatly appreciated.
    Thank you,
    carloss

    check this
    Hyper-V in Windows Server 2012 R2 Client Hyper-V Enhanced Session Mode in Windows 8.1
    Starting with Hyper-V in Windows Server 2012 R2, Hyper-V can now redirect local resources to a virtual machine session through Virtual Machine Connection tool. The enhanced session mode connection uses a Remote Desktop Connection session via the virtual
    machine bus (VMBus), so no network connection to the virtual machine is required
    https://technet.microsoft.com/en-us/library/dn282274.aspx

  • How do you get the hot keys / keyboard shortcuts to work?

    I have the free trial version of Photoshop. I am new to Photoshop, I am just starting to learn how to use it. I notice that some of the shortcuts/hot keys don't work.
    For example, one basic hot key that does not work is the F7-key. The F7-key opens and closes the layers palette.
    Another hot key that does not work is the spacebar. My teacher taught me to hold the spacebar down when you want to move the canvas around. When I am in handtool mode I hold the spacebar down, I then apply pressure on my laptops touchpad, I then slide my finger across my laptops touchpad in order to try and move the canvas, but the canvas does not budge.
    Some shortcuts work. For example, tapping the F-key multiple times will expand and reduce the size of Photoshop.
    Closing my web browser did not resolve the problem. Updating the software did not resolve the problem.
    I am eager to learn Photoshop, but it's hard, and probrably a waste of time, to try and learn Photoshop when some of the softwares hot keys don't work. Anyone have a solution they can offer?
    Thank you,
    Jennifer
    Toshiba X75 / Windows 8 / i7-4700MQ / GeForce GTX770M / 32GB RAM

    hello.. i want to ask your something about your laptop... i am actually planing to buy new laptop.Toshiba X75 or MSI GS70 .. i am not gammer. never play game on laptop last 6 years... my laptop 24hrs on.. and i do design...  so how is your Toshiba X75 performance for designing.. i read on internet. Toshiba X75 have overheating problem.. but the people complain most of them gammer... as i don't play game on laptop.. will i face same thing ?

  • How can I change the Fn keys so they would work for Itunes too?

    When I want to do PAUSE on the keyboard I press Fn + down arrow and it only works with Media Player, how to change it it will work also on iTunes?

    Hi,
    Are you using the Birthday Calendar as selected in iCal's preferences? For me this gives an alarm on the day at 8am.
    Best wishes
    John M

  • How do I tell itunes (on a Windows XP PC) to start adding downloaded files to an external drive ? Starting itunes while pressing the shift key and then choosing works only for a MAC, I think. I only need this one final step. All is copied already

    How do I tell itunes on a Windows XP PC to start downloading new songs to my external drive ? The whole library has already been moved. I am just one final step away. Everything I`m downloading still lands on C: Relaunching itunes while pressing "shift" and then getting prompted to choose library might work for a Mac, it doesn't for Windows.

    In iTunes click on 'Edit', then 'Preferances', Click on the 'Advanced' button, change the entry in the 'iTunes media folder location' to point to your external drive.

  • How do I get the Novo Power Management button to work on Windows 7 64 BIT - Y Series

    I swore on the forums there was some instructions as far as how to get this crap working.
    I don't think it was a topic, but a post within a topic...a lengthy one at that.
    It says specifically how to get the Energy Management software to work with the NOVO button when it's pressed on 64 BIT Windows 7 systems.

    I am moving your question to the Windows Hotsync board, where you will find this thread stickied near the top, discussing Windows 7 & 64 bit Hotsync issues.
    There are no 64-bit USB drivers.  Only way to sync with 64-bit machines is wirelessly, via Wi-Fi, Bluetooth (neither of which your m130 is capable of), or IR.
    smkranz
    I am a volunteer, and not an HP employee.
    Palm OS ∙ webOS ∙ Android

  • How can I get the Creative Cloud Desktop app To work on Windows Vista?

    Currently My CC Desktop app is a greyed out icon.
    It has been on and off for months now.
    I have called technical support several times and been directed to
    1) Uninstall it
    2) Run the cleaner
    3) Turn AV Software off
    4) Delet my prefrences
    5) Delet Hosts file in Windows 32 folder
    6) Restart, Restart,
    7) Use a diffent User account. etc.
    The apps work= PS, INDD, AE, PROJ, AI, DW, Fla, etc.
    But the Creative Cloud Destop app does not. I have to use the web browser to upload or sync any files.
    Anyone have any other ideas I welcome them.
    My specs,
    Running windows vista, on a very good HP machine.
    I have been a loyal Adobe Customer, For more than 15 years.
    I have been an Adobe Certified Expert for 3 years or more.
    I work professionaly with this software as a teacher. I have taught this software to college grads. and now to highschool students.
    Ususally Adobe is one of the best companies to deal? Please stop farming your support calls to other countries, The connections are poor, and the support is terrible and it is damaging your reputation.

    Hi D2xS-Shooter,
    I am afraid Creative Cloud desktop app is not compatible with Windows Vista. If you run into problems there are very limited resources from Adobe to assist.
    Creative Cloud is a collection of apps with various different tech specs
    http://www.adobe.com/uk/products/creativecloud/tech-specs.html
    Thanks!
    Eshant

  • How can I bring the recordset count inside the same recordset?

    I have a query inside a procedure where I'm paging the results.
    I dont know how to bring the total results inside the recordset.
    How can I bring the recordset count inside the same recordset?
    SELECT *
    FROM ( select a.*, rownum rnum
         FROM (SELECT
              FROM table
              ORDER BY id DESC) a
         WHERE rownum <= pg*50 )
    WHERE rnum > (pg-1)*50

    My query is much more comples, so that is why I'm using the other script.
    When I included the "COUNT(*) OVER() tot_cnt AS total" it didn't worked:
    ORA-00904: "TOT_CNT": invalid identifier
    What is the tot_cnt?
    SELECT *
    FROM (SELECT a.*, rownum rnum
    FROM (SELECT
    ed_fotos.id AS COD_FOTO,
    ed_fotos.arquivo AS NOM_ARQUIVO,
    ed_areas.nome AS NOM_REDACAO,
    COUNT(*) OVER() tot_cnt AS total
    FROM edt.ed_fotos ed_fotos
    INNER JOIN edt.ed_volumes ed_volumes ON ed_volumes.id = ed_fotos.volume_id
    INNER JOIN edt.ed_caminhos path_alta ON path_alta.id = ed_volumes.caminho1
    INNER JOIN edt.ed_caminhos path_baixa ON path_baixa.id = ed_volumes.caminho2
    INNER JOIN edt.ed_areas ed_areas ON ed_areas.id = ed_fotos.redacao_id
    ORDER BY id DESC) a
    WHERE rownum <= 200 )
    WHERE rnum >= 100

  • How do i bring the kuler swatches into Photoshop?

    How do i bring the kuler swatches into Photoshop? I don't see any buttons that say "download" or anything like that.

    Yes, i logged in and hit the download button.  When i open up the 
    file i get a message that reads "melody.ase is an unknown format and 
    cannot be opened."  I changed the extension, but still no luck.
    You can't "open" the .ase file. You must load it into Illustrator, 
    Photoshop, or InDesign (versions CS2 or later). Go to the Swatches 
    panel in the respective application and choose "Load Swatches" from 
    the panel's flyout menu.
    Mordy
    Mordy Golding
    Author, Consultant, Trainer
    Adobe Community Expert
    Blog: http://blog.mordy.com/
    Follow me on Twitter: http://twitter.com/mordy

  • Qosmio G20 - How do I get the tuner to work?

    Hi There
    I have a Toshiba G20 Qosmio. :) It has windows xp professional installed on it.
    I can access the Qosmio Player (pressing the tv button) when the laptop is off. I get a snowy picture.
    I donnot have a remote. I am from South Africa.
    Can someone help with the following:
    - Do I need a remote to tune to a psecific frequency?
    - If no, how do I tune to a specific frequency without a remote?
    - How do I access the user interface on the Qosmio player?
    - Can the Qosmio player be accessed from Windows?
    - Is there a guide on how to setup and use the Qosmio player? If yes, please provide download link.
    Thanks

    Hi
    How do you want to watch TV?
    What Qosmio player do you have?
    As far as I know the Qosmio Player versions 4.3 and older do not support DVB-T signal.
    Furthermore Im not quite sure if you would be able to receive the TV channels in South Africa if this Qosmio G20 has been released in European country.
    The point is that the internal tuner would not receive the signals due to different PAL/NTSC settings.
    Regarding the channel scanning:
    Please check this thread:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=25430
    In order to run scan you have to start the Qosmio player, press the F1 key and go into setup.
    There you can do a scan. You dont need the remote control!
    The other fact is that the Qosmio Player is not Windows based applications and you cannot start if from Windows. If Windows is running then you can use the MCE (Media Center) instead of Qosmio player.

  • How do I bring the Source List back in sight?

    I opened iPhoto this morning to look for a specific photo, but the Source List does not show on the screen. So I cannot highlight the category of Photos in the Source List. How do I get the Source List back? It has never disappeared before. I checked iPhoto Preferences and could find nothing there to help me, either. The iPhoto Help in the menu bar doesn't tell how to retrieve the Source List - it just tells how to use it once you have it there.
    Hilma Jenus

    Oops! After writing the question above, I started exploring this website (I've never used it before), and I found the answer to the question - just click on the Escape key and the full screen of photos pulls in smaller and displays the Source List on the left right where it has "always" been! Thanks for providing the answer that I couldn't find in iPhoto Help or iPhoto Preferences!
    Hilma Jenus

  • How do I stop an app from waiting?  I have tried to reboot by holding the home key and power button to power down.  Also, I have tried to sync the apps from my laptop with no success.  Can you help?  Thanks.

    How do I stop an app from waiting?  I have tried to reboot by holding the home key and power button to power down.  The app is still grayed out and waiting so it cannot be deleted.  Also, I have tried to sync the apps from my laptop and tried downloading new appswith no success.  Can you help?  Thanks

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • How can we find the most usage and lowest usage of table in Sql Server by T-SQL

    how can we find the most usage and lowest usage of table in Sql Server by T-SQL
    The table has time stamp column
    StartedOn datetime
    EndedOn datetime

    The Below query has been used , but the textdata column doesnot include the name of the table ServiceLog.
    SELECT
    FROM
    databasename,
    duration
    fn_trace_gettable('F:\Program
    Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\Log\log_148.trc',
    default)
    WHERE
    DATABASENAME='ZTCFUTURE'
    AND TEXTDATA
    IS
    NOT
    NULL
    --AND TEXTDATA LIKE 'SERVICE%'
    order
    by cpu
    desc; 

  • How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?

    How do I disable the hardware acceleration in Flash player on a Windows XP machine remotely?
    I have a few hundred computers running Adobe Flash Player.
    The operation system is Windows XP.
    They are Compaq 6005 desktop PC’s, with an inbuilt ATI radeon HD 4200 video card.
    We have a persistent issue where viewing a flash video (e.g. something on youtube) causes the video card driver to crash.  You are left with no video signal to the monitor.  Audio continues and the computer still responds to commands. This only happens when watching flash video.
    We have tried:
    Updating flash plugin (numerous versions)
    Updating the video card drivers (we have tried the last three video card driver versions, including the HP drivers and ATI drivers)
    Updating the browsers (this problem happens with IE8/9 and Firefox10/11/12)
    There seems to be two ways to work round this issue.  One is to disable the video acceleration in the ‘troubleshoot’ section in the advanced part of the display settings area in windows.  The other way is to start a flash video, right click, go to ‘settings’ and untick the box marked ‘Enable Hardware Acceleration’.
    Doing either of these things allows the user to view flash videos with no apparent issues.
    Is there a way to disable the hardware acceleration in Flash without visiting the PC?  Perhaps an undocumented option in the mms.cfg file? I understand that you can use an option to skip the video card check, and so force hardware acceleration on, can you do the opposite?
    Thanks in advance
    Daniel.

    Hi.
    I have had over 200 views, and no suggestions as to how this could be fixed.
    I have also posted in the general flash forum, that thread has fewer views.
    If I should put this question in a different forum please let me know which one.
    If what I am asking is not possible is there a mechanism for escalating this issue or requesting a feature for the next version of flash?
    Thanks.

  • Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    Nice to see 13" retina but it has only Intel HD Graphics 4000 and does not have NVIDIA GeForce GT 650M with 1GB of GDDR5 memory card. How it will affect the speed, performance and other things compared to 15" retina where NVIDIA GeForce card is available.

    The 15" Retina's will have better performance than any 13" Retina. Not only do the 15" machines have dedicated GPU's, but they also have quad-core processors, whereas the 13" Retina's only have dual-core processors.

Maybe you are looking for