Qosmio F50 - How to recover from hdd?

Hello,
I got a very big problem.
I made some changes with my Vista regs and then I was unable to start it up again.
So, I started recovery program (second HDD), backed-up my files and selected whole HDD recovery.
Well, now problem - everything looked fine, but when I got into Vista set-up I had to shut the computer down.
Now, when I start the pc and load Vista I get message that I should reinstall my computer again.
Well, but they say nothing about how to load recovery file, because I get no option to do that - only Emergency mode, Emergency with network support, etc. but no recovery. By the way, when I select Emergency mode, I cannot load Vista either - it says that I have to run configuration in normal mode, which says to re-install. Yep, -_- circle.
Model: Qosmio F50
Do u think that when I delete whole Vista disk manually - e.g. with linux and then start the computer up, I get option to load second part of the disk to start installation?
Thanks in advance since I am really despair

There has NEVER been an option to use F8 (or when am I supposed to push F8?). I could always enter recovery mode ONLY when Windows did not load successfully (in the past I could not start emergency mode). I guess I do not have to order it since I started ubuntu, and copied entier HDDRecovery folder onto my external drive, so I guess I gotta buy DVD which has ~6GB and burn content of the folder (not folder itself?). and then it will boot from the DVD? (like windows when u install it).
By the way, I guess there is no way to start recovery from ext. hdd (yea a silly bios).
I know I should back it up myself, but Toshiba could give one cd with the notebook. However, it is probably their policy. How many people burn recovery? well, they need to make some money ....
If you have any other recommandations, please let me know :)
Message was edited by: snypy

Similar Messages

  • How to recover from bad development of masterhead or layout or nav panel

    Hi all:
          I begin to modify framework of our portal,  but I am new to it, my question is how to recover from bad development of masterhead or layout or nav panel, there is error in my development.
    thank you very much for your reply

    Hi,
    ARe you able to access Content admin and system admin from your portal now?
    What is the error its occuring.
    Try to modify the rule collection to point to default desktop.
    Best Wishes
    Idhaya R

  • How to recover from disapled ipad

    how to recover from locked ipad after wrong passwored trile

    If you cannot remember the passcode, you will need to restore your device using the computer with which you last synced it. This allows you to reset your passcode and resync the data from the device (or restore from a backup).
    If you restore on a different computer that was never synced with the device, you will be able to unlock the device for use and remove the passcode, but your data will not be present.
    You may have to force iPad into Recovery Mode
    http://support.apple.com/kb/ht1808

  • How to recover from a bad upgrade due to a blackout, stuck in the recovery itunes screen on the iphone

    how to recover from a bad upgrade, due to a blackout. stuck in the recovery itunes screen on the iphone

    Bjpolinda,
    Do you have a recent iCloud or iTunes backup? If so, just plug your phone into iTunes, restore the phone and bring your backup back by following the prompts on the phone.
    If you didn't back up your phone before attempting to update, you may have lost all your photos and other data on your phone. If you restore the phone through iTunes, it will most definitely wipe your phone of all data and reset it to factory settings.
    Emmons

  • Qosmio F50: How can I install Vista business

    hello!
    I recently bought qosmio f50 and it came with vista home edition..
    I need to install Vista business.
    How can i do that?
    Do i need to format?
    Then how can i install back all the utilities and drivers that it came with?
    Will i have problems with my laptop if i do that?
    Message was edited by: xaralas

    Hi
    The Vista installation is not tricky.
    Just put the Vista disk into the ODD and then boot from the disk.
    The installation will start automatically.
    But this will format your HDD and you will lose your installed Win XP and other files.
    > how can i install back all the utilities and drivers that it came with?
    I assume youve got a Toshiba recovery disk.
    If you want to get back the OS installed by Toshiba then you should use the Toshiba recovery disk for recovering.
    PS: what Qosmio F do you have exactly? I ask it because F 108 is not known to me

  • How to recover from Large Volume Table Insert

    We are inserting 1 Million rows into table using ODI IKM Append. If half the way thru the job fails because of tablespace or other issue, how to recover? Does 50% rows are commited to db? What is the best way to handle this type of situation?

    You can have different options for this.. You can commit them in every 1000 rows in the KM.You can also set the dml operation into one transaction and commit the same at the end of step.
    Try to follow load plan for better restart options. If you cann't provide more undo table space then try loading less amount of records lets say 1 to 100,000 and then 100,001 to 200,000 like this which is little bit complex but you have to sacrifice something to overcome the issue.
    I believe you must have data in C$ and I$ step. Hence you process these data instead of loading again from original source. So it depends on you, how you are going to design the total process. You can better judge it. Talk with your dba about this issues as well.
    Thanks
    http://bhabaniranjan.com/

  • Qosmio F50 - How do I bring the Fn-Keys and Hotkeys to work on Windows XP?

    Hello.
    I downgraded my Qosmio F50-137 to XP, found every driver needed for hardware recognition, but am still looking for the Fn-Keys and Hotkeys to work.
    I know (or at least think) that I have to install the "Toshiba Hotkey Utility".
    But this utility needs the "Toshiba common module" for Windows XP to be installed.
    I fond on the web two common modules for Windows XP:
    common_modules_2489A
    and
    common_modules_24895A
    The first one says "This software utility does not support this system.Installation will be terminated"
    The second one says "TVALZ driver installation has failed"
    How can I make the installation work properly? or How can I make the Fn-Keys and Hotkeys work on my F-50 ?
    Thank you in advance
    Camusensei

    Ok sorry for not answering the questions but I have to find a webpage to answer a few things...
    {quote:title=I said:}I've found the XP drivers of other components for my computer on the Toshiba European driver page {quote}
    But I'm not sure it was there, since going there and trying to find the page again drove me to the normal driver page.
    I'm asking your help me finding the page where:
    - You choose your computer in a column by type and then the next column apperar (on it's right), until you have selected your computer, and a button "choose now" appear.
    - When you click this last button, you land in a page where you have more drivers than in the normal driver page of toshiba (for me I had the option of Windows XP, while I don't have it on the normal page)
    - I'm preety sure it was on the toshiba-website, but I don't remember how to find this page again... And since I already formatted...
    I'll continue looking if I can find it again, if someone knows this page, please tell me/us...
    thank you in advance.
    {Edit:}
    YESSS
    Sorry just to edit my message I don't want to double-post.
    Please stop searching, this is it :
    http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp#
    if this website can help some people, then it's great. i'm preparing my next message...
    {/edit}
    Message was edited by: Camusensei (90 minutes later)
    {Edit2:}
    By the way, I don't find my X300-145 on this website...
    Only X305-computers referenced in the X-series, does any know why?
    {/edit}
    Message was edited by: Camusensei

  • How to upgrade from HDD to SSD in Mid 2010 13inch MacbookPro?

    I am upgrading from HDD to SSD and would like the step by step direction of how to do it on my 13inch MacBookPro mid 2010. Also, I would like to do a clean install of the OS onto the new SSD, and simply transfer my data(i.e. documents, pictures) from the old HDD to the new SSD(Samsung 500GB)
    Any detailed directions would be appreciated. You may send responses directly to my address: ******* Thanks in advance
    <Edited by Host>

    Tolefe1 wrote:
    Thanks. How do I booth to IR? Won't  I need to connect to the internet to be able to booth to Internet Recovery... Please give steps as I am pretty new to this.
    Turn the Mac on (or reboot it) and press command-option-R as soon as you hear the startup chime. Hold the keys down until you see a globe, then release. When the Recovery Menu appears you choose Disk Utility and format the SSD for use in a Mac (Erase>Set Format to MacOS Extended (Journaled), then exit Disk Utility and choose Install OSX
    You will need to be connected to the Internet and your Mac should detect your network and ask for a password automatically when Recovery Starts.

  • How to recover from Oracle XA Error Native Error 24776?

    Hello,
    I believe that I have a connection leak somewhere and that an Oracle
    connection is hung.
    I get the following error when trying to access the data source
    getConnection method.
    How can I recover from this? The WL Server console shows 0 connections
    to the connection pool, but obviously some are in there.
    Thanks,
    java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
    has occur
    ed in the transaction branch start() failed on resource 'Oracle Connection
    Pool': XAER_RMERR : A resource manager error has occured in the
    transaction bra
    nch
    javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
    Error Occur
    red. Native Error: 24776
    at
    weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
    at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
    at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
    at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
    at
    weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
    urceInfo.java:1075)
    at
    weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
    sourceInfo.java:1007)
    at
    weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
    ourceInfo.java:203)
    at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
    rverTransactionImpl.java:419)
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
    at
    weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
    250)
    at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
    at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
    at
    weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:305)

    Steven ,
    It's already been answered:
    http://groups.google.com/groups?hl=en&lr=&ie=UTF-8&c2coff=1&threadm=4009ccc9%241%40newsgroups.bea.com&rnum=1&prev=/groups%3Fq%3D24776%2520OracleImplXAResource%26hl%3Den%26lr%3D%26ie%3DUTF-8%26c2coff%3D1%26sa%3DN%26tab%3Dwg
    Regards,
    Slava Imeshev
    "Steven Ostrowski" <[email protected]> wrote in message news:40ce1480$1@mktnews1...
    Hello,
    I believe that I have a connection leak somewhere and that an Oracle
    connection is hung.
    I get the following error when trying to access the data source
    getConnection method.
    How can I recover from this? The WL Server console shows 0 connections
    to the connection pool, but obviously some are in there.
    Thanks,
    java.sql.SQLException: XA error: XAER_RMERR : A resource manager error
    has occur
    ed in the transaction branch start() failed on resource 'Oracle Connection
    Pool': XAER_RMERR : A resource manager error has occured in the
    transaction bra
    nch
    javax.transaction.xa.XAException: [BEA][Oracle JDBC Driver]Oracle XA
    Error Occur
    red. Native Error: 24776
    at
    weblogic.jdbcx.oracle.OracleImplXAResource.checkError(Unknown Source)
    at weblogic.jdbcx.oracle.OracleImplXAResource.start(Unknown Source)
    at weblogic.jdbcx.base.BaseXAResource.start(Unknown Source)
    at weblogic.jdbc.jta.DataSource.start(DataSource.java:617)
    at
    weblogic.transaction.internal.XAServerResourceInfo.start(XAServerReso
    urceInfo.java:1075)
    at
    weblogic.transaction.internal.XAServerResourceInfo.xaStart(XAServerRe
    sourceInfo.java:1007)
    at
    weblogic.transaction.internal.XAServerResourceInfo.enlist(XAServerRes
    ourceInfo.java:203)
    at
    weblogic.transaction.internal.ServerTransactionImpl.enlistResource(Se
    rverTransactionImpl.java:419)
    at weblogic.jdbc.jta.DataSource.enlist(DataSource.java:1287)
    at
    weblogic.jdbc.jta.DataSource.refreshXAConnAndEnlist(DataSource.java:1
    250)
    at weblogic.jdbc.jta.DataSource.getConnection(DataSource.java:385)
    at weblogic.jdbc.jta.DataSource.connect(DataSource.java:343)
    at
    weblogic.jdbc.common.internal.RmiDataSource.getConnection(RmiDataSour
    ce.java:305)
    [att1.html]

  • How to recover from RTSA71-55P6AU-XD003G-60UM03

    Hello -
    How do I recover from this 'Start Up' error:
    RTSA71-55P6AU-XD003G-60UM03
    When starting up normally or in Safe Mode, it stops frozen and hangs until a hard shutdown is implemented. 
    In safe mode start-up, the process stops at 'atipcie.sys'. 
    Any ideas? 
    - Dub
    Compaq Presario CQ62-220US Notebook
    This question was solved.
    View Solution.

    Hi,
    For software damages, we may be able to recover data but for hardware damages, sometimes very hard to recover data and many times we can't recover at all.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How to recover from datasource.getConnection hangover

    Hi,
    We have a standalone J2EE application wherein the app tries to restart itself in case of FATAL errors like connection loss etc.
    Database: Oracle10g
    Driver: oracle.jdbc.driver.OracleDriver
    Issue: On error, the service tries to restart itself dueing which it aborts the connection and recreates the connection with datasource.getConnection().
    In some cases during Soak testing, if the database goes down then the application seems to hang on datasource.getConnection() for almost 3 hours and greater.
    Options we tried :
    1. Use OracleDataSource and setLoginTimeout as 10 secs.
    There seems to be no effect on the code. Not sure whether the datasource actually uses the timeout interval.
    2. Use CONNECT_TIMEOUT_LISTENER=10 in listener.ora on the database server.
    Does not seem to resolve the issue. getConnection still hangs.
    Any suggestions what would be the best way to recover from this issue?

    Hi,
    The same should be available in the source system (DEV), Surprising how / why the same is available in BW system.
    I checked the SAP ERP source system to which I have an access and the same is not available in the source system not in the BW system
    My sugession is to go for a generic datasource after identifying the table with the help of functional consultant.
    Regards
    Venkata Devaraj

  • How to recover from network port configuration deletion (airport)

    a couple of years ago, i accidently deleted the network port configuration for AirPort in the Show pop-up menu. No big deal, i thought at the time. I don't have an AirPort card and I won't be using AirPort in this computer. Ok, I now have an old-style AirPort card (powerbook G3 firewire, 10.2.8) and the AirPort utility doesn't see that it's installed. I realized right away, the network doesn't have a port... so the system doesn't see it, right? So, how do I get this port back? Do I have to reload a new System entirely and not save previous network settings... or is there an easier way to recover from my blunder?

    Thanks Rob,
    Glad to be here. Yeah, 10.2 works the same as 10.4. The problem with what you suggest is that I can no longer get airport as an option in Network port configs... so when I go to the new button all the other options are there EXCEPT AirPort. This is what I need to restore. I haven't checked, but I'm assuming I've nuked the pref panel out of the master library. So, I've messed up big time. I was looking for a way to recover that didn't involve reloading the whole system. This isn't like OS 9 and older where you can go and pick a little piece and stick it back into your system folder... I think. Thanks for the reply.

  • How to recover from a Sync command that returns a SyncStatus value 8 (Object not found)

    Hello,
    We are using ActiveSync protocol. We have a situation where our local DB is probably in a invalid state where we do a Sync command passing all of our folders (full sync) and one of the folder (or many) doesn't exist anymore.
    The Sync command result doesn't tell us which folder is invalid.
    But the question is more: how should we recover from this "Object not found" error? Should we erase the local database and do a full refresh?
    Status reference:
    http://msdn.microsoft.com/en-us/library/gg675457(v=exchg.80).aspx
    Thanks
    ArchieCoder

    Sorry, that really isn't a Firefox support issue. Contact a Mac support forum or Mac-users group for advice on to solve that issue.

  • How to recover from a Crash

    Hi,
      I had the misfortune yesterday of having my OS X Lion operating system have a complete meltdown and become unrecoverable.  Luckily, I had a time machine backup from the previous evening, so the sequence went something like this:
    Boot with Command-R option to bring up the recovery options, selected recovery from time machine
    Wait approx 2 hours....
    All back - or is it???
    Aperture's library is not backed up by Time Machine (I'm using referenced, so the images are fine).  Luckily, I have a vault...
    Point Aperture to the Vault
    Recover recover recover.... waiting waiting....
    Finished!
    But wait!  All the images now have a red stripe icon at the bottom right.  Blast - I now have to locate referenced files.  It appears that Aperture lost the links or doesn't recognise the locations because of the complete wipe and recover from backup
    Locate referenced files, find a match, "Reconnect All".  Done.
    OH noes....  some didn't appear to reconnect.  Checking - aha!  THe vault is a couple of months old, and I did a big cull of useless images after updating the vault - the remaining unconnected images can safely be deleted from Aperture as they no longer exist.
    Now to re-do the processing of the 30 images I was working on last night...  (sigh...)
    Lessons Learned:
    1.  Make sure Time Machine is working
    2.  Update your Vault regularly onto an external hard disk

    I seem to recall that it was a recommended approach to stop huge Time Machine updates every time you touched Aperture.
    Time machine now makes incremental backups of the Aperture Library - unless the library is in use by Aperture while Time Machine is running. It suffices to quit Aperture before backing up. That is what I do on my MBP.
    Something else to note for the record:  when you do a recovery and reinstall from Time Machine, Aperture perceives your reconstructed boot volume as a new volume, even though it has the same name and everything.
    Exactly, but thankfully reconnecting is easy.
    To restore a system I usually restore from a bootable clone. I regularly clone the system as a secondary backup.
    Cheers
    Léonie

  • HT1212 how to recover from passcode lock

    Please help to recover from lock out device disabled after wrong passcode enterred There seems to be not backup avaiable on home PC.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.

Maybe you are looking for