Qosmio F50 not detecting Tv tuner(cardbus)

Hi!
I have Qosmio F50-108 which does not have integrated Tv tuner. I have external tuner - [http://www.acesuppliers.com/Supplier_Company/AVerTV-Cardbus-Plus--E501R_Product_Showroom_24705.html].
Sorry to ask stupid question but does this toshiba support Carbus? Becouse when I plugged it in the previus laptop on Xp it worked normally, but now when I do it, nothing happens.
Thanks in advance.

Hi
As far as I know the Qosmio F50 supports an ExpressCard slot.
But more details about the slot you should find in your user manual which is preinstalled (I think) on the notebook.
Check if the external Tv tuner card is compatible with this ExpressCard slot

Similar Messages

Ipod not detected by tunes

I've been using my 30gb ipod just fine for the month that I've had it. Today for some reason when I tried to sync it, it didn't work. My computer sees it, but itunes does not. The ipod itself has the red circle and says do not disconnect, but nothing is happening. I've tried all of the stuff on the site including the 5 "R"s, restalling itunes, evrything I can find on the site, but no luck.
Any advice??
video Windows XP

It sounds like the iPod Update did not download completely and the file that was downloaded was corrupted because part of the file was missing.
When you connect your iPod to your computer, don't open iTunes and if it opens, force quit (or control + alt + delete, and stop the application).
Run the stand-alone iPod updater to restore your iPod to the factory settings. You can download the iPod Updater here: http://www.apple.com/support/downloads/ipodupdater20051117.html
Also, you might want to try downloading and reinstalling iTunes software again. You can download the iTunes software here: http://apple.com/itunes/ .
And if all else fails... Contact AppleCare and tell them about the problem you had with the update. You can find the phone numbers for an AppleCare facility in your area here: http://www.apple.com/support/contact/phone_contacts.html
I hope this helps,
Cory

Qosmio F50-125 - How to use TV-FM Tuner in Windows 7

Hello,
I am using Qosmio F50-125 and I just upgraded to Windows 7.
I just now found out that I have a TV tuner on my notebook and I dont know how to use it.
First I dont have drivers for my TV tuner and tried to download something like TV-tuner driver v.2.3.3.31 from the toshiba website, but there is not a typical setup.exe but just some files inside.
If you could tell me a bit more about how to use my TV option and how to install the proper drivers I would be truly grateful.
Thanks in advance!

Hi mate,
Friend of me has also Qosmio F50 with TV Tuner and Windows 7 now. As far as I know the posted instructions from the other users are correct.
First you have to extract all files. Then go in device manager and right click on the TV card (I think its marked with yellow exclamation mark). If you right click choose Update Driver and in next windows choose the advanced installation (second point). Now you have to choose the driver directory yourself and navigate to the folder where you have extracted the files. Click on OK, Next, etc. and the driver should be installed properly.
Maybe you to restart the notebook but this shouldnt be a problem! ;)
If you have more questions, please let us know! If you need more assistance I can ask my friend again for further details.

Re: Qosmio F50-10B Blutooth not working

I Just Purcheesed Toshiba Qosmio F50-10B laptop , every thing okey except the bluetooth could not be started, I tryed every thing I know ,but still seems no bluetooth device was installed ..please help me as it is very importent to me.

1- wireless switch on blutoothe not detected
2- I downloaded BT screen and BT stack ( BT screen installed ok)
3- BT stack during the installation it reached to the point searchig for driver or for the BT device but it could not find it and stay searching for ever.
windows home premum 32

TV Tuner USB TV Tuner Analog Global Stick not detected on HP G42 360TX (help me)

sorry my bad english.
i buy USB TV Tuner Analog Global Stick. see the product : http://sangattaonline.com/?vwdtl=ya&pid=47
i plug that tv tuner usb to my usb port on HP G42. My notebook not detect new hardware. There not notification on taskbar about new hardware. I use Windows XP SP3. If i use Windows 7 problem was the same. I try that on my PC it work. And i try that on my second laptop its work. Please help me....
1. HP G42 360TX can not detect all USB TV Tuner?
2. Should i change product of Tv Tuner? how about USB Hybrid Tuner Stick (UB430-AF)?its work..?
Thanks for help me. realy need help.

The problem I've had in Mac Pro with Hauppauge's USB myTV.PVR (which also had Eskape CD - 32 Bit that ran in Leopard but not Snow) was same message in Vista U. 32Bit : this device can perform better...
which I ignored. The message does not occur in Windows 7. I do have problems with MCE not recognizing the tuner occasionaly but prefer to use Hauppauge's WinTV 5,6,7 App. in any case.
If you have not been to Hauppauge's site you may see something that helps including driver updates here:
http://www.hauppauge.com/site/support/supportmainhvr.html
http://www.hauppauge.com/site/support/support_mce.html

My i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens. What should I do?

my i tunes software can not detect my i pod, I check the cable, I close my i pod and I relight, but nothing happens.
What should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Qosmio F50-12J - Battery will not charged on Windows 7

Hi!
When I install Windows 7 and drivers and power adaptor is pluged in in right corner battery icon says:
pluged in but not charging!
Then my notebook lose battery and turn off even if is pluged in power.
Please help me!
LokiCRO

Hi
I must say this is a very interesting posting, buddy. I have Qosmio F50 and Windows 7 too but no problems at all. Everything is working like a charm.
Have you tested the same on Windows Vista the preinstalled OS? Normally the battery should be charged if AC/DC adaptor is connected.
In your case I would also try to update the BIOS. You can find it on the Toshiba page.
Are you using original Toshiba AC/DC adaptor?

Re: Qosmio F50-12J - FN key not working with new Value Added Package

Hi,
I have Toshiba Qosmio F50-12J and have trouble with Value Added Package v 1.2.28.
I can't get the flash cards to work. When I press FN key nothing happens. BTW, I installed VAP on freshly installed Windows 7 64 bit. With the previuos version of VAP that I tried on Windows 7, KeNotify.exe was crashing. Now there is no apparent crash, but nothing happens.
Also, there is a problem with the Button Support utility (touch sensitive controls). Whenever I reboot my system, all the white illumiation LEDs on my laptop are lit although I turned them off.
So, could someone confirm that they have a working Value Added Package v 1.2.28 on Windows 7 64bit ?

Hi buddy,
Your posting is a little bit confusing and in my opinion you make something wrong. My Qosmio F50 runs pretty good on Windows 7 and I dont have any problems with the FN keys, illumination buttons or other function.
First of all make sure that all drivers are installed!!! I mean chipset, graphic, sound, etc. Check the device manager and if you can find unknown devices or yellow exclamation marks download the missing drivers on the Toshiba page.
The Button Support Utility has nothing to do with Flash Cards support utility. So before you make something wrong, please uninstall Toshiba Value Added Package and Flash Card Supports Utility. Restart the notebook after uninstallation and clean the registry using CCleaner (http://www.ccleaner.com/). If you have clean the registry, restart the notebook again.
Now you should install newest Toshiba Value Added Package. Restart again.
Install Flash Cards Support Utility for Vista. Restart again.
Now you should check if it works or not.
Sorry but thats all what I can say. I dont have any problems on my Qosmio F50 and Windows 7.

TV Tuner Antenna is not detecting signals

i have a hp pavillion dv4-1257 tx notebook.my TV Tuner Antenna is not detecting signals . also it doesnt receive any radio or FM signals.please help me. i live in kerala, India. does receiving signals depend on locations???
PLEASE HELP ME OUT

Hello,
Please see this guide for MediaSmart TV SW. You must live in an area that has a HD digital tower nearby to pick up the digital signal.
It is possible that you are also in a building or location where there is a lot interference.
You can use this URL to detect signals and towers.
Here is the general guide for setting up the MediaSmart SW
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01534616&cc=us&dlc=en&lc=en&jumpid=reg_R1002_US...
I am an HP employee.
"Did my response help with your issue? If so, please give me Kudos by clicking the "Kudos" button or mark the post that solved your problem as the Accepted Solution. Thanks!"

Qosmio F50-126 not supprted for Win 7 upgrade?

I am really getting angry about Toshiba and Windows 7 upgrading option.
I am really excited about upgrading my Qosmio F50 -126 to Windows 7 from Vista Home Premium.
But after doing a bit research on the issues involved in upgrading, I burst into anger.
I went to this link [http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm] to check whether my notebook is supported but because i paid good money for it i it SHOULD be supported.
But guess what.. IT ISN'T!!!
On top of that.. it says on the website that the notbook not mentioned will get 'limited support'!!!!
WHAT?? my 1999 dollar MACHINE WILL GET LIMITED SUPPORTED FOR WINDOWS SEVEN!.
What am i suppose to do.. buy another Toshiba or sue them to get the money and buy a new one???
Does this mean I CAN'T run windows seven will all the drivers runnin??? WHAT SHOULD I DARN DOOO??

hi abdusamed,
calm down - it takes some time to get all win7 drivers running, i am sure they will provide drivers for your cam etc...
but i think they are not tested yet.. and you wont get a driver that's improperly working, dont you?
and dont stress yourself with that "limited support"-thing...
this only means if a machine is deliverd with eg. vista there is support for vista only.
if you install antother os eg. win7 or linux they will give you "limited support" means if available they provide drivers and help.
just like running this forum (which is realy helpful to me and some others)
so just wait a little i am sure there will be a solution!
btw: you can investigate your hardware and get some reference drivers of the manufacturers..
but this will take a bit (lots) of time and some testing...
and i am not sure if there isnt any special hardware in it that causes the reference driver to work bad/not.
i wont do that ... but if you like....
btw: is there an official release date for win7-machines from toshiba?

Not possible to install printer on Qosmio F50

I have a Qosmio F50-10M, running on Vista 32-bit SP2.
I have tried several times to install a new printer HP Laserjet 200 color MFP276nw without success. The error text is not specific...
According to the installation software, I should contact my system provider's support.
Well, here I am...
Does anybody has any ideas, how to install this printer on my system?
kind regards,
kai

Let be honest with this issue. If your notebook runs well and OS is stabile why notebook manufacturer should be responsible if there is some problem with third part software installation?
In my opinion you should contact printer manufacturer software and ask why you cannot install their software on well working Windows system. I use HP Envy 120 with my machine and I had no problems at all (Win7 64bit).

My i touch 16gb version is not detected by i tunes?

my i touch 16gb version is not detected by i tunes?
also the volume gets automatically reduced to nil...so am not able to hear songs....
what could be the prob...please help

Start here to et iTunes to see the iPod.
iPhone, iPad, or iPod touch: Device not recognized in iTunes for Windows
The:
- First restore the iPod from backup.
- If still problems, restore the iPod to factory defaults/new iPod.

HT1296 i just downloaded the latest version of itunes but now i cant zync my ipod. i tunes does not detect my ipod. ut just to work perfectly with the older version of itunes but not now. what is something i can do?

i just downloaded the latest version of itunes but i cant zync my iphone nor my ipod. it just to work perfectly with the older version of itunes but now itunes does not detect my ipod nor iphone. i have a windows pd and iwindows detects the iphone and ipod. what is something i can do to fix the problem??

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests

Qosmio G10-133 - Battery not detected following Windows 7 upgrade

Hello, I hope someone can help my frustrations here.
Over the last couple of weeks I have successfully upgraded my laptop to Windows 7, increased memory to 2gb, purchased new laptop power lead, brand new battery and and resolved every issue that Windows 7 threw at me. The laptop and works like a dream other than one issue that seems to have got worst.
The laptop no longer recognises the new battery.(picture of battery with cross through it and a power plug) For approximately a week after installing the battery it worked okay but now will not detect it all. I have no errors in the device manager and windows has recognised the ACPI battery entries etc and has no issues. I have also loaded the Toshiba value added package that Windows 7 found for me but still nothing. The battery does not even charge although sometimes the battery works for around 30 secs on boot up if the battery is removed and put back in, and then stops again (once Windows has loaded) I have tried numerous things like disabling driver, reinstalling battery etc but nothing. I did try the battery iniitally with Windows XP and worked fine.
I have also searched the web and have seen many other laptops with Windows 7 have had this problem, including Toshibas. Some say update the BIOS but Toshiba have not released an upgrade since the original one in 2004 (which is for WIn XP Media Center) and there are no settings in my BIOS for ACPI etc.
Also, I cannot calibrate the battery as I cannot do anything with it. I dont think this is an issue though.
If anyone has any ideas I would really appreciate it or any links to any drivers etc.
If this is sorted my laptop should last for another 5 years!
Thanks for reading this.
Dickie

Hi
First of all I doubt that many other notebooks with Windows 7 have this issue. I never heard about this and normally the battery charging will not be controlled from the OS. It happens automatically and your battery will be charged if the AC/DC is plugged in. So the OS doesnt affect this!
To be honest I also dont know why your battery isnt detected but what happens if you power off the notebook and leave the AC/DC adaptor connected for 24 hours? After this it should be possible to work on battery minute for 1 hour or more.
If not it seems to be a hardware issue Maybe the battery doesnt work properly anymore and should be replaced. You should contact the dealer where you purchased it
By the way: Here are some nice and interesting tips about battery:
http://aps2.toshiba-tro.de/kb0/HTD9401AZ0001R01.htm

Hi; I updated my iTunes to the latest version (11.1.4.62), but it does not detect my iPhone 4s any more.

Hi,
I updated my iTunes to version 11.1.4.62, but it does not detect my iPhone 4s any more. I have tried the following ways but still did not work:
Rebooted the computer
Rebooted the iPhone
plugged and unplugged the USB cable multiple times and to various USB ports
Uninstalled and installed the i-Tunes
Signed out the iTunes and signed in again
my USB cable and ports are all ok
my ios version on iPhone is : 7.4.4
my laptop os is windows 8.1 and my processor is: Intel Core i7-3610QM @ 2.30 GHz
I appreciate your help.

I find this on another post and tried it. It WORKED. I had to modify to fit my situation but give it a try. Good luck.
Go to Windows 8.1 Control Panel.
Go to Hardware and Sound; Devices and Printers; Device Manager; Portable Devices (look for Apple IPad)
Right-click, then select properties on the menu list.
Under the "Driver" tab menu, confirm the update driver button is not greyed out. If the update driver button is grey and unselectable, you need to select and click "Change Settings" button located near the lower left corner.
Now you can click the "Driver" tab menu near the top, so you can see the "Update Driver" button.
Select "Update Driver".
Select and click "Browse my computer for driver software".
For Windows 8.1 64 bit, it should be located in the folder: C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers.
Click Next, and let the driver re-install.
iTunes 11.1.4.62 should open automatically if your iphone is connected already.

Qosmio F50 not detecting Tv tuner(cardbus)

Similar Messages

Maybe you are looking for