Qosmio F60 and Win7 x64 Drivers
Hi, i just purchased a Qosmio F60:- PQF65A-016002 and did a clean install of windows 7 Pro x64.
But i am now unable to find any drivers for it. i have looked in the toshiba support but it brings up no drivers for my machine.
If someone could point me in the right direction that would be great.
Thanks
Alastair
Hello Alastair
Why you have done this stupid mistake as hundreds of other notebook owners?
It is logic to check support at first and be sure certain operating system is fully supported and then installed own OS. Isnt it?
Qosmio F60 is newest notebook and even not available worldwide so you must be careful with support for it. The drivers will be offered soon or later but it can take some time.
What to do now?
Either go back to factory settings or try to use some drivers for other Qosmio models with similar hardware configuration. Try with X500. It is definitely supported for Win7 x64. Maybe Toshiba tools and utilities can be installed on your F60.
Play a little bit with it. Nothing can goes wrong now.
Similar Messages
-
Re: Qosmio X300-14Y and Windows7 x64 Drivers
Hello
I just bought Windows7 x64 Ultimate and cant use it cos of driver problems.. If possible can admin support the drivers pls?Not yet :D im that much smart to check PQX32E on but thats why im asking there is no solution on win7 drivers for PQX32E
now on i findout x300 series r similar to x305.. and i find drivers for them.. now im wondering if all the x305 drivers r same on models cos if u check the site (i checked all x305 series on http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=2261847& rpn=PQX32U&modelFilter=X305-SP6828A&selCategory=3&selFamily=804517 and they all look same) but im not sure if the all drivers r same kind mybe im wrong.. any idea ? -
Qosmio F60 - Any updated display drivers?
Hi guys, Ive been looking through the forums over the last month and have seen other people have been having glitchy display problems due to the out of date drivers from toshiba, at the moment I cant play any of the latest games like battlefield bad company 2 etc.
I was hoping if there was anyone out there who could tell me if or when a new driver is coming out for the GeForce GT 330M from Toshiba as I cannot use the ones from Nvidia as they are not compatable with notebooks. Or if anyone has any suggestions as to tweaks of settings changes. The games do run on the lowest of low graphics setting but who wants to to play them like that when I've just spalshed out $2500 NZD for the latest notebook which should be able to play them with ease?
WillHowdy
I installed the latest driver for the gt 330m card from http://forums.laptopvideo2go.com/topic/26451-v19716-windows-7vista-32bit-nvidia-mobile-oem
Follow the instructions.
I found only a very, very small improvement but found that the card reached 80degrees c. the installed from factory driver ran at max 70C.
ran 3dmark 06 and the new driver jumped the score up to around the 6500 mark compared with 6350 mark with the older driver.
Not realy anything to write home about. i have switched back to the older driver because for such a piddly improvement the card ran 10 degrees hotter.
I'm trying to find out if the Qosmio f60 016 only uses ddr2 graphics memory or ddr3. the ddr3 memory, acording to notebook check, should run the card 20% better.
I have my mother-in-law laughing at me because I bought her a $1200 HP laptop on the same day and it gets 200 more marks in 3dmark 06 than my Qosmio.
i think Toshiba may have pulled a swift one on Qosmio F60 016 owners...........Thanks Toshiba. For your flagship model it really ain't that great.
Cheers -
Wheres all the WIN7 X64 drivers
I have a K9N2 sli plat. This is a new build w/ win7 x64. I don't see where all the drivers are. I got a few from drivers on the mainboard page, but nothing useful. I cant run live update since I don't have net on it yet. That's why I'm looking for drivers.
CM HAF 932
MSI K9N2 sli plat
AMD Phenom 9600 BE
OCZ DDR2 1066 8GB
XFX GTS 250
Seagate 1TBx2
LG cd/dvd burner
LG blue ray
Corsair HX1000Don't use Live Update, it's best to download manually and then install whatever you need.
If you need to update BIOS: >> Use the MSI HQ Forum USB flasher <<
"w/ that b4."
Please use normal English, this is a "Global forum" and people use many languages that must use online translators and the chat room, net-speak stuff like that does not translate. -
Hp 15-R128NE (K6X56EA) Win7 x64 Drivers
Dear all,
i got this gift, Hp 15-R128NE (K6X56EA), which includes FreeDOS OS pre installed,
i need to install win7 x64 bit on it and can't find a way to.
please help me finding it. I don't want to install Win 8.1 because i'm used to Win7.
thanks in advance.Hello @iAbdO,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to install Windows 7 on your notebook computer, and I would be happy to assist you in this matter!
In order to install Windows 7 x64 bit on your notebook, you will need to find a reputable retailer that can provide you with a genuine copy of Windows 7.
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Qosmio x300 and Win7 - FN buttons dont work
I reinstalled Windows 7 and now the FN buttons dont work. I have installed the newest version of VAP, the flash card utility is running. So I have no idea.
Did I forget to install something?
Or is there a tool who installs all drivers for my Qosmio x300 in one piece?Hi
Normally its enough if you install Value Added Package and Flash Cards Support Utility to use the FN keys. But make sure that both tools are released for Windows 7 and not for old Vista.
As far as I know if you search for Qosmio X300 on the Toshiba page you will only find VAP for Windows 7. The Flash Cards Support Utility is an older version. I would recommend install a newer version, for example search for Satellite L550. There you can find Flash Cards Support Utility for Windows 7, its version 1.63.0.4 -
Lenovo N500 and Win7 x64: fails to resume from sleep or hibernate
Hello!
First of all, sorry for my bad english. I have bought an N500 laptop on the previous week. I'm using Windows 7 x64 on my desktop PC for months without any problem, so i thought i give it a try on my new notebook to. I choosed the x64 edition because my notebook has 4GB of memory plus the 256MB dedicated memory of the GeForce IGP. The installation went fine, it detected all the hardware in the laptop (except the memory card reader, but i found out that the Vista driver works fine with it). My only problem is, that if i try to hibernate the machine, or put the notebook into sleep state, most of the times it doesn't wake up from it, just simply reboots. If i resume from hibernate it provides me the option to delete the restoration data and do a clean boot. It's very annoying because defaultly if i close the lid or just simple leave the machine for a while, it goes to sleep automatically (i turned it off for now of course, but i like to use). It does it even after a fresh install, if i didn't install anything by hand. Windows Update offers me prelease GeForce drivers, but if i install those the problem still remains. As is see there isn't any Windows 7 drivers for this laptop, just Thinkpad series have Beta drivers for this OS. Or just i didn't find them on the site? I will try to install Windows 7 x86 this afternoon to check it's the 64bit OS which makes the problem or not.
Can somebody suggest me something to solve this problem?I have the same problem here. lenovo N500 Windows 7 7100 64bit. Have Mobile Intel 4 Series Express Chipset Family, That recently got official driver from intel (I dont think that's the problem anyway).
Everything work fine with 32bit.
Look around everywhere, no Success yet -
Bootcamp partition lost after moving to larger HDD (Mavericks and Win7 X64)
Hi Folks!
I read those topics concerning lost and broken bootcamp partitions and I am Wondering if someone may help me.
What was my aim: Due to lacking space of my 320 GB HDD I moved to a 750 GB HDD.
I did this by installing Mavericks from a USB disk and rebuilt it with TM. After the installation I had a fully working Mavericks partition and the MacOS recovery partition.
Next step was to rebuild the Bootcamp partition. For that I installed a new copy of windows via bootcamp assistant. After booting up the first time I booted the mini partition wizard cd, deleted the bootcamp partition and rebuild the partition from the old HDD changing the size fitting to the available space. After rebooting I chose to boot from the Win7 DVD and chose the repair option to fix windows. Everything worked well, I could boot into Win7 and it showed me both partitions (Mavericks and bootcamp).
BUT
when i boot into MacOS it is not able to mount the mavericks partition.
After checking it with fdisk and disk I found out that the bootcamp partition was recognized as FAT32 by the disk utility program, which always told me that it was not able to repair the bootcamp partition.
So I followed Christopher Murphy's instructions to change the type for FAT 32 (0C) to ntfs (07) with the effect that I can't boot windows anymore due to "operating system not found" error.
So this is what the refit partition inspector tells me about my HDD:
*** Report for internal hard disk ***
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 731457695 Mac OS X HFS+
3 731457696 732727239 Mac OS X Boot
4 732727296 1465147391 Basic Data
Current MBR partition table:
# A Start LBA End LBA Type
1 1 409639 ee EFI Protective
2 409640 731457695 af Mac OS X HFS+
3 731457696 732727239 ab Mac OS X Boot
4 * 732727296 1465147391 07 NTFS/HPFS
MBR contents:
Boot Code: Unknown, but bootable
Partition at LBA 40:
Boot Code: None (Non-system disk message)
File System: FAT32
Listed in GPT as partition 1, type EFI System (FAT)
Partition at LBA 409640:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 2, type Mac OS X HFS+
Listed in MBR as partition 2, type af Mac OS X HFS+
Partition at LBA 731457696:
Boot Code: None
File System: HFS Extended (HFS+)
Listed in GPT as partition 3, type Mac OS X Boot
Listed in MBR as partition 3, type ab Mac OS X Boot
Partition at LBA 732727296:
Boot Code: Windows BOOTMGR (Vista)
File System: NTFS
Listed in GPT as partition 4, type Basic Data
Listed in MBR as partition 4, type 07 NTFS/HPFS, active
This is the info got gives to me:
sudo gdisk -l /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Disk /dev/disk0: 1465149168 sectors, 698.6 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 3AA6D384-5EC7-48C6-B593-4513AFF55241
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1465149134
Partitions will be aligned on 8-sector boundaries
Total free space is 1805 sectors (902.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 731457695 348.6 GiB AF00 Macintosh HD
3 731457696 732727239 619.9 MiB AB00 Recovery HD
4 732727296 1465147391 349.2 GiB 0700 BOOTCAMP
philipp-3:~ Phil$ sudo gpt -r -vv show disk0
Password:
Sorry, try again.
Password:
gpt show: disk0: mediasize=750156374016; sectorsize=512; blocks=1465149168
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 1465149167
start size index contents
0 1 MBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 731048056 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
731457696 1269544 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
732727240 56
732727296 732420096 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
1465147392 1743
1465149135 32 Sec GPT table
1465149167 1 Sec GPT header
This is what fdisk gives:
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 91201/255/63 [1465149168 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 1023 254 63 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 731048056] HFS+
3: AB 1023 254 63 - 1023 254 63 [ 731457696 - 1269544] Darwin Boot
*4: 07 1023 254 63 - 1023 254 63 [ 732727296 - 732420096] HPFS/QNX/AUX
And this is a photo of the disk util (in german)
And this is the error when I try to check it:
Next step is to try to cover the windows copy. I guess startup repair will work, unfortunatly I have no DVD at the moment right here.
But my problem is not the restoring of windows but to mount the bootcamp partition in Mavericks again.
Any help?
Thanks in advance
PhilOk, it works again. But actually I don't know why. After neither startup repair nor mini partition manager could repair the ntfs partition, i deleted it and rebuilt it from the old HDD (fortunately not deleted yet). The only thing I did in difference was to boot into Mavericks before starting startup repair after i copied the partition. For any reason Mavericks recognized it this time. I have no clue why but everything is working.
So far... -
Satellite P200D and Vista x64 drivers
Hello,
I recently added to my satellite P200D-11L 4gb of ram.
Because the 32bit OS doesn't recognise 4gb of ram i decided to switch to 64-bit hoping that Toshiba promotes Vista and of course the spread of 64 bit systems.
I am very dissapointed that i cant install toshiba value added package and for that reason a lot of my laptops fuctions are not available.In addition to that my laptop crashes if i put it to sleep.
I searched the forum and i found out that Bios is responsible for the value added package and that Bios is the reason of the error message i get every time.
I tried to update my Bios only to find out that its not yet updated by Toshiba to support the 64 bit VAP.
My point is: are they going to make it work at last? They just promise stuff before you buy but support of software stops after a few months of laptop release. Especially for the P220D series.
Does anyone know anything?
help please.You want a detailed instruction?
As I said the 32bit VAP must be installed.
Then go to the installed VAP folder, replace the old 32bit dll file with this new downloaded 64bit dll file and enjoy!
The 64bit VAP contains 3 files; tvalz_o.cat, TVALZ_O.INF and TVALZ_O.sys.
Copy these files into the same place where the 32bit files are placed!!
By the way; You have installed Vista Ultimate version. I remember that sometimes Ultimate Vista is not fully compatible with some Toshiba tools; i.e VAP -
Qosmio F60 - No additional touchpad and Fn function after Win 8 upgrade
I recently installed Windows 8 on my Qosmio F60 and now I have some issues, I think it might be driver related but not sure which drivers in particular.
1. The touchpad still works for moving the pointer but swiping along the right edge doesn't scroll anymore, I have had a look on the drivers webpage but cant find which driver I need it install to make this work. Also does anyone know if there is a Windows 8 driver so that i can swipe the edge to bring up the charms and switch tabs?
2. The FN keys no longer work so i can't control the brightness or the other functions along the top row of the keyboard.
If anyone can help with either of these issues that would be great.
Thanks,
PhillipHi
As you can see there are no special Win 8 drivers fro the Qosmio F60 series.
Its not Win 8 supported.
However, I think you should be able to use the Win 8 upgrade drivers released for Qosmio F750.
Try it.
Recommend installing the touchpad driver (from Synaptics), the Toshiba Function Key Utility, Value Added Package and Toshiba System Driver -
PrE-10 Will not start in Win7(x64)
I sincerely hope this is not redundant, but I have spent days on this forum looking for answers, but with no luck. I have seen many similar questions, but none of the 'fixes' proposed are relevant, or do not work for me.
History:
I have been running PrE-10 since its release, on Win-7(32-bit). I recently had a system crash after installing Windows-8 Beta and had to wipe my hard drive and start from scratch. This time I loaded Win-7 (x64). All my original apps I had stored on an external drive. Some re-installed, some not. I had to re-download PSE-10, and PrE-10 as 64-bit apps.
PSE-10 and the associated Organizer, work fine as before. PrE-10 however does not start. I get the splash screen, with the options of NEW, OPEN and Organizer. Of these, only Organizer opens. The other two options either bring up a Windows Error box 'Pre-10 has failed to start', or it just sits and does nothing.
It is not a system limitation as I have far more than the requirements needed to run it and as I said, it worked fine in the 32-bit version, and nothing else has changed (that I have input), so I am baffled.
As I said, I have done many of the proposed fixes I have seen on the forum, if they are pertinent to my system, and even some that were not. I have now completed the reinstallation of most of my applications, and so far only PrE is causing a problem, but it is very important to me as I am working on a project that requires it.
I have done a Belarc report, but I do not see a link to upload it. I see links for images, videos, tables and weblinks, but nothing for files (pdf). I will attempt to load it as an image and see if this works. I do not want to post it as text or HTML as it is 7 pages long! (Nope, it does not insert). Perhaps someone can tell me how to upload the file.
Here is a system summary:
OS Name
Microsoft Windows 7 Ultimate
Version
6.1.7601- Service Pack 1 Build 7601
Other OS Description
64-bit
OS Manufacturer
Microsoft Corporation
System Name
DOUG-IQ775
System Manufacturer
HPQOEM
System Model
SLIC-CPC (TouchSMart IQ-775)
System Type
x64-based PC
Processor
AMD Turion(tm) 64 X2 Mobile Technology TL-58, 1900 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date
American Megatrends Inc. 5.15, 11/26/2007
SMBIOS Version
2.4
Windows Directory
C:\Windows
System Directory
C:\Windows\system32
Boot Device
\Device\HarddiskVolume1
Locale
United States
Hardware Abstraction Layer
Version = "6.1.7601.17514"
User Name
DOUG-IQ775\DOUG
Time Zone
US Mountain Standard Time (AZ)
Installed Physical Memory (RAM)
4.00 GB
Total Physical Memory
4.00 GB
Current Available Physical Memory 1.68 GB
Total Virtual Memory
8.00 GB
Available Virtual Memory
5.32 GB
Page File Space
4.00 GB
Page File
C:\pagefile.sys
STORAGE
USB Flash Memory, s/n 001D0F1FCF2DC8C08406020B, rev 1.00
Generic Flash Disk -- drive 8, 8GB s/n 03483DBB, rev 8.07
WDC WD16 00BEVS-60RST0 -- drive 7, 160GB s/n WDC WD1600 WD-WXC108351497
Generic CF Reader -- drive 5, s/n 058F12M111B, rev 1.01
Generic SM/SD/MS Reader -- drive 6, s/n 058F12M111B, rev 1.00
Century EX35SW4_SB4-A USB Device -- drive 1, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-B USB Device -- drive 2, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-C USB Device -- drive 3, s/n 011E011D3B, rev 0100
Century EX35SW4_SB4-D USB Device -- drive 4, s/n 011E011D3B, rev 0100
HARD DRIVES
c:/D:(NTFS on drive 0) *
500.11 GB
k: (NTFS on drive 7)
160.03 GB
w: (NTFS on drive 1)
250.06 GB
x: (NTFS on drive 2)
250.06 GB
y: (NTFS on drive 3)
250.06 GB
z: (NTFS on drive 4)
250.06 GB
WDC WD16 00BEVS-60RST0 USB Device [Hard drive K:] (160.04 GB) -- drive 7, SMART Status: Healthy
WDC WD50 00AAKS-65TMA SCSI Disk Device (500.10 GB) -- drive 0, s/n WD-WCAPW3069745, SMART Status: Healthy
Drives new – drive encryption
Memory Modules c,d
1660.37 Gigabytes Usable Hard Drive Capacity
914.49 Gigabytes Hard Drive Free Space
CD/DVD
TSSTcorp DVDR/RW TS-T632L ATA Device [Optical drive]
Software Versions & Usage
i Adobe Download Assistant
i Adobe Help
i Adobe Photoshop Elements Editor Version 10.0
ı i Adobe Photoshop Elements Version 10.0
ı i Adobe Premiere Elements Version 10, 0, 0, 0
i Adobe Systems Incorporated - Elements Organizer Version 10.0
ı i Adobe Systems Incorporated - ElementsAutoAnalyzer Version 10, 0, 0, 0
Adobe Reader and Acrobat Manager Version 1.5.7.0
i Adobe Reader Version 10.1.3.23
i Adobe Systems, Inc. - Shockwave Flash Version 11,3,300,270
ı i Adobe Updater Startup Utility Version 2.2.0.2 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)
ı i Adobe® Flash® Player Update Service Version 11,3,300,270
i Amazon MP3 Downloader Version 1.0.0.0
i Any Audio Converter Application Version 3, 3, 8, 1
i Any DVD Converter Application Version 4, 0, 1, 1
ı i Apple Inc. - QuickTime QuickTime 7.7.2 (1680.56)
ı i Apple Push
i Apple Software Update Version 2.1.3
ı i Belarc, Inc. - Advisor Version 8.2g
i Canon IJ Driver Uninstaller Version 1.2
i Canon IJ Utility Uninstaller Version 1, 3, 0, 0
ı i CANON INC. - CNSLMAIN.EXE Version 1, 4, 3, 0
i CANON INC. - MP Navigator EX Version 1, 0, 7, 0
i CyberLink - CLDownloader Version 2.3.0.2715
i CyberLink - DZM Version 2.05.3206
ı i CyberLink Corp. - PowerDirector Version 9.0.0.2930
ı i Google Chrome Version 21.0.1180.75
ı i Google Update Version 1.3.21.103
ı i GSpot Codec Information Appliance Version 2, 7, 0, 1
ı i Igor Pavlov - 7-Zip Version 9.20
ı i INR Desk Version 2.0.0.0
ı i Microsoft Corporation - Internet Explorer Version 9.00.8112.16421
ı i Microsoft Corporation - Windows Installer - Unicode Version 5.0.7600.16385
Microsoft Corporation - Windows® Search Version 7.00.7600.16385
ı i Microsoft Malware Protection Version 4.0.1526.0
i Microsoft Network Inspection System Version 4.0.1526.0
ı i Microsoft Security Client Version 4.0.1526.0
i Microsoft ® Windows Script Host Version 5.8.7600.16385
ı i Microsoft® .NET Framework Version 2.0.50727.4927
i Microsoft® .NET Framework Version 3.0.6920.5011
i Microsoft® .NET Framework Version 4.0.31106.0
ı i Microsoft® CoReXT Version 7.250.4232.0
ı i Microsoft® Windows® Operating System Version 12.0.7600.16385
i OpenOffice.org 3.4 Version 3.04.9590
i OpenOffice.org Base Version 3.04.9590
i OpenOffice.org Calc Version 3.04.9590
i OpenOffice.org Draw Version 3.04.9590
ı i OpenOffice.org Impress Version 3.04.9590
i OpenOffice.org Math Version 3.04.9590
i OpenOffice.org Writer Version 3.04.9590
i OpenOffice.org Writer(Web) Version 3.04.9590
ı i Orbitdownloader.com - Orbit Downloader Version 4, 1, 1, 1
i PlotSoft L.L.C. - PDFill PDF Editor with FREE PDF Writer and PDF Tools Version 9.0.0.9
i PlotSoft LLC - PDFill FREE PDF and Image Writer Version 9.0.0.9
ı i Realtek - ReStart Application Version 500, 1001, 719, 2007
ı i Realtek - RtlService Application Version 700, 1004, 1207, 2009
ı i RichVideo Module Version 2.0.1.5417
i Safer Networking Limited - Secure Shredder Version 1.9.0.0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 5, 2, 0
i Safer Networking Limited - Spybot - Search & Destroy Version 1, 6, 0, 30
i Safer Networking Limited - SpyBot-S&D Version 1, 6, 2, 0
ı i Safer Networking Ltd. - Spybot - Search & Destroy Version 1, 6, 0, 0
i SmartSound Sonicfire Pro Version 5.7.1
i Sun Microsystems, Inc. - Java(TM) Platform SE 6 Version 6.0.0.105
i The Audacity Team - Audacity® Version 1,3,13,0
Can anyone help me get this app going... please!!
Thanks in advance!
DNThis is frustrating! I just answered this post at length, but when I posted it it disappered!
Guess I have to start over and hope for the best!
Is that an HP laptop?
No, it is a desktop. However it is an HP 'hybrid' all-in-one, and uses a lot of laptop hardware and software to keep the low profile case.
-HP Fingerprint/Password conflict http://forums.adobe.com/thread/911575
I read this and it does not apply to my system.
Otherwise, unless I missed it, I do not see mention of your graphics/video card brand/model and driver number
This is why I asked how to upload the Belarc report! Too much info to post. Here is the Graphics info.
Name
NVIDIA GeForce Go 7600
PNP Device ID
PCI\VEN_10DE&DEV_0398&SUBSYS_2A40103C&REV_A1\4&1BC86A40&0&0020
Adapter Type
GeForce Go 7600, NVIDIA compatible
Adapter Description
NVIDIA GeForce Go 7600
Adapter RAM
256.00 MB (268,435,456 bytes)
Installed Drivers
nvd3dum,nvd3dumx.dll
Driver Version
7.15.10.9804
INF File
oem12.inf (nv_NV3x section)
Color Planes
Not Available
Color Table Entries
4294967296
Resolution
1440 x 900 x 59 hertz
Bits/Pixel
32
Display
Nvidia Flat Screen [Monitor] 19.25" vis
Driver
c:\windows\system32\drivers\nvlddmkm.sys (7.15.10.9804, 5.73 MB (6,006,696 bytes), 1/25/2007 6:43 PM)
Check the ATI or nVidia or ??? website to be sure you have a current driver
Another interesting story, that! Nvidia/GeForce does an auto detect and correctly identifies the graphics card, and sends me to a link to upgrade the driver. The driver page says it is for Vista x64 and Win7 x64 (even its long name has 'win7-x64' in it). I download and attempt an install, and it comes back with "you are running Windows 7 64-bit. This driver is for Vista only. Installer closing." I went back and tried 4 other Win-7 x64 drivers, all reported the same thing, even though they state on the site they are for Win7 x-64. I then went to the Device Manager and tried to update the driver, but it reported using 'the most current driver available'. So I uninstalled the current Nvidia driver, which put me into VGA mode. I then went to Windows Update and did a search for updates. It found a missing Nvidia driver and called it 'Nvidia Driver for Win7 x64'. I downoaded and installed it and my system returned to normal 1440 x 900 display. I checked the driver info and it is the same driver as the original, including the release date, so apparently the original driver was in fact x64 compatible, and there does not appear to be an updated driver for it.
Also, for laptops... if that is what you have
-http://helpx.adobe.com/premiere-pro/kb/error---preludevideo-play-modul es.html
-http://forums.adobe.com/thread/1001579
It is not a laptop, but as it uses many laptop softwares and hardware, I will check these and see if they help. I will post the results.
-Use BIOS http://forums.adobe.com/thread/1019004?tstart=0
There are no DISPLAY options in my BIOS setup. There is also no update available for the BIOS from HP
Thanks for the help.
DN -
Qosmio F60 - No picture on webcam
Have just purchased a new Qosmio F60 and the webcam was working, it worked for a day or two and now the webcam light comes on but no picture. I have audio when I do the settings but I cannot get any picture.
Have tried everything my limited knowledge allows, including updates and re-installing the drivers but still only audio, no picture.Hi buddy,
Do you use the webcam with Camera Assistant Software or another program like Skype? If you use another program like Skype you should close the Camera Software. You cant use two programs at the same time they access the webcam.
If its not working you should update the webcam driver. You can download the newest version here:
http://eu.computers.toshiba-europe.com -
Qosmio F60- Randomly freezes for about one second
Hi,
I have a qosmio F60, and recently i've been having random freezes even while typing atm.
So, my notebook freezes for a second every now and then and it's getting really annoying. It does so no matter what i'm doing...
I restored the pc to factory settings and updated all the drivers but still i get this annoying problem...
Any help would be appreciated.
I figured the problem is a *SUDDEN FPS DROP*...save me -.- pls
Message was edited by: ralph_af> I restored the pc to factory settings and updated all the drivers but still i get this annoying problem...
Hmmm..... why to update ALL drivers if you dont know why this happen?
You must restore notebook to factory settings, open notepad and test it. can you confirm that this happen immediately after notebook restore to factory settings?
It is not easy to assist with such issues. We dont know which stuff is installed on your notebook, which additional (third part software) applications are installed, which background processes are active, how your OS is configured and so on.
In my opinion some background activity is responsible for this. it can be Microsoft updates installation if you have set it to option automatically. It can also be some antivirus scanning activities. Who knows?
Try to change OS settings and OS configuration. -
Re: Qosmio F60-L10 - Do I need an extra antenna for TV tuner?
Hi,
i have an question for the Tv-Tuner of the model Qosmio F60-10L. Do I need to connect an extra DVBT antenna or can I watch TV without to connect extra periphery?
ThanksHi zero82,
I have checked the specifications on the Toshiba website about Qosmio F60 and founded an interesting information about integrated TV Tuner that should answer your question:
+Toshiba laptops equipped with a DVB-T/analog Hybrid TV Tuner are ready to receive digital or analog TV channels wherever you want. The most popular TV broadcasting formats are supported. *The compact TV Tuner is simply integrated and additional power supply or external antenna is not required.* The comprehensive software package offers an electronic program guide, time-shift recording, videotext, various recording and replay functions to enhance your mobile TV experience.+ -
Hello, I have a Qosmio F60, and I want to change the standard sata HD for a SSD one. Is it possible? What kind of SSD specifications should I look for?
Thank you in advabce for your helpSSD upgrade is possible but I presume new SSD will not work on maximum speed. It is not so bad because SSDs runs mach faster and you will notice increasing performance boost.
I have upgraded my old P500 with SSD and Im happy with it.
More info about SSDs you can find on http://storage.toshiba.eu/cms/en/index.html but of course it must not be Toshiba SSD. You can check other manufacturers too, compare the prices and choose the best one.
Maybe you are looking for
-
App store errors out loading safari 6.1
App store sends error when trying to update safari 6.1 - getting this error The operation couldn't be completed. (NSURLErrorDomain error -1100.)(102) All other upgrades working fine.
-
Hi, I have a scenario where my stored procedure takes 5 parameters and the users can pass NULL or some value to these parameters and based on the parameters, I need to pull data from various tables. Is it possible to use a case statement in the join,
-
10.5.5 MAJOR Problems! Finder crashing...constantly!
Installed on Mac Pro via Software Update. Seemed to go fine but upon restarting I get constant finder, mail, and ical crashes (Finder won't stay running, at all) system is useless in this state, the error is: Symbol not found: _DAVErrorHttpResonseHea
-
64bit version of firefox, i mean mine field has so many bugs
MineField beta 4 (FireFox x64) has many bugs, i don't know, maybe it's so common, because in every update none of them were fixed, for example my bookmark not only doesn't work, but also it clean up my previous one each time i close and open mine fie
-
How to move pages around in acrobat
Hopefully someone can help me. How can I re-order my pages in acrobat 11 for mac