Qosmio F60-L10 - How to configure tv tuner with integrated antenna?

good evening,
i have a notebook toshiba qosmio f60 ,i had read your answer about tv tuner.
my question is : how to configure tv tuner with integrated antenna? thanks

Hi 3171954,
I think Paolo30 is right. Qosmio F60 is equipped with internal DVB-T but in some cases you need an external antenna to pick up the low signal. In most cases only in large citys you dont need an external antenna. If you live on the fringe of the city, normally a cable is needed.
Anyway, do you mean an external antenna or external DVB-T receiver (USB stick)?
Normally Windows media center should recognize the internal DVB-T tuner. Is it listed in device manager? Did you update the driver?

Similar Messages

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

I have a Symphonic 32' HDTV (Dolby Digital Plus). can someone help me figure out how to configure it optimally with my Mac Mini? the display and sound is off. Do I need drivers/software? I'm new to macs.

Hello, since nobdy else has replied...
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there.

How to Configure the Blackberry Facebook Integrated Application

Hi Friends ,
How to Configure the Blackberry Facebook Integrated Application while getting the Application Id , Application Secret for Registering the App in Facebook.
Please Help me , It''s Urgent.
Thanks & Regards,
Nagarjuna Metla.
arjuna

Bonjour,
Effectivement, la valeur du filtre de la carte NI-6280 est 40kHz.
En simulant la carte, j'ai pu faire le test avec le VI joint.
Si ce VI ne fonctionne pas, quelle est le code d'erreur obtenu et à quelle fonction apparaît-il ?
Salutations,
Isabelle
Ingénieur d'applications
National Instruments France
Attachments:
filtre 6280.vi ‏73 KB

How to configure bt mail with icloud?

how to configure bt mail with icloud?

iCloud does not handle any mail systems except for its own. BT is not an iCloud mail system, so you can't.

How to configure portal server with the Backend Oracle database

Hi Portal Experts,
we are planning to install Netweaver 04s sp stack 9 full java edition with Oracle 8i on windows platform.
we have the installation docs of portal but we didn't have any idea about how to configure Portal server with the Backend Oracle database at the time of installation or after ost installation of portal.can anyone provide the documentation about this or guide me how to achieve this.
PLZ share ur views---your help would be highly appreciable.
Regds
Phani.

HI
if you r working in Sap enterprise portal use for connection url
jdbc:sap:sqlserver://ilsql01.tlv.sap.corp:1433;DatabaseName=Northwind
ilsql01.tlv.sap.corp:1433 this is your portal url with port number
Northwind is your database name.
for dirver you need to give
com.sap.portals.jdbc.sqlserver.SQLServerDriver
in case if you r working on other than sap say windows along with oracle try to use
Connection URL as jdbc:oracle:<drivertype>:@<database>
Driver name as oracle.jdbc.driver.OracleDriver
ex jdbc:oracle:thick:@localhost:3036:mydb
Oracle implements two types of JDBC drivers:
Thick JDBC drivers built on top of the C-based Net8 client, as well as a Thin (Pure Java) JDBC driver to support downloadable applets. Oracle JDBC drivers are used to create JDBC applications to communicate with Oracle databases.
Oracle extensions to JDBC include the following features:
Data access and manipulation
LOB access and manipulation
Oracle object type mapping
Object reference access and manipulation
Array access and manipulation
Application performance enhancement
*************if the information is helpful to you please reward points************

How to configure IIS webserver with weblogic so that I can invoke servlets without the .wlforward extension

How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter and .wlforward
has also been
included as a special file type. However this requires me to key-in ".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

I am able to invoke the servlet without the wlforward extension now.
However, now I am required to add /weblogic before the servlet
name otherwise it does not execute the pathtrim property.
I have tried with the pathprepend thing also.
Can we get rid of the /weblogic part also. I just want to execute
my servlet as http://iis/myServlet.
Your help in this regard is greatly appreciated...
Thanks..
"Rishi" <[email protected]> wrote:
>
Thanks for the reply Kumar.
I did follow the instructions as given in the Weblogic documentation
The documentation said to add iisforward.dll as a filter service
and register .wlforward as a special
file type to be handled by iisproxy.dll. For this,
while configuring the IIS server in the Home Directory tab
I added an extension ".wlforward" and the executable as
iisproxy.dll. Is this the way it should have been done...
I also modified the iisproxy.ini file as per the documentation.
I have added the WLForwardPath property and set it to /weblogic.
My server works fine when I give the url as
http://iis/myServlet.wlforward
but it does not work for
http://iis/myServlet and this is the way i'd want it to work.
Please tell me if I am missing something on the configuration part
and if there is something special that needs to be done. I shall
be grateful to you.
Kumar Allamraju <[email protected]> wrote:
http://e-docs.bea.com/wls/docs61/adminguide/isapi.html#101184
Rishi wrote:
How to configure IIS webserver with weblogic so that I can
invoke servlets without the .wlforward extension
As per the documentation iisforward.dll is registered as a filter
and
.wlforward
has also been
included as a special file type. However this requires me to key-in".wlforward"
after my servlet name.
What I want is something like this
http://iis/MyServlet
Please help me find a solution to this
Thanks,
Rishi

Re: Qosmio F60-L10 - Do I need an extra antenna for TV tuner?

Hi,
i have an question for the Tv-Tuner of the model Qosmio F60-10L. Do I need to connect an extra DVBT antenna or can I watch TV without to connect extra periphery?
Thanks

Hi zero82,
I have checked the specifications on the Toshiba website about Qosmio F60 and founded an interesting information about integrated TV Tuner that should answer your question:
+Toshiba laptops equipped with a DVB-T/analog Hybrid TV Tuner are ready to receive digital or analog TV channels wherever you want. The most popular TV broadcasting formats are supported. *The compact TV Tuner is simply integrated and additional power supply or external antenna is not required.* The comprehensive software package offers an electronic program guide, time-shift recording, videotext, various recording and replay functions to enhance your mobile TV experience.+

Qosmio F60, PQF65A - How to play blu rays?

Hey people, I have been having immense trouble getting the blu ray player to play the blu ray disc's. I got this laptop second hand and all the manufacturer software was uninstalled so I had to start afresh.
Currently I have Toshiba DVD player V3.01.1.07-A. I have been trying very hard to find a patch or a player that will allow me to play blu rays. Even VLC media player won't do it. Its frustrating the living out of me.
I have d/l so many versions of WinDVD but to no avail. I keep getting a message saying that its not compatible with my current version.
Please help.

Hi
The WinDVD BD was preinstalled on notebooks which are equipped with an BD drive.
The notebook seems to be an Toshiba Australian series and I found all the drivers and tools here:
http://www.mytoshiba.com.au/support/computers/qosmio/f60/pqf65a-00y002/download
There you can see that an WinDVD 8 Blu-ray Player Update is available for download but for models with Blu-ray.
If you are still using the original Toshiba Windows system, then you could try to set the notebook back to factory settings using the HDD recovery option or Recovery disk (you have to create such disk) and then can check if WinDVD BD would appear as preinstalled software.

How to configure oracle 10g with clients

Hello sir i am a database user.
I want to install an oracle 10g (Client server architecture)
As i have a licenced Oracle 10g CD Pack.
Pls help me how to install Oracle & how to configure its clients.
As i have a server(running server 2003 ) in it and corresponding clients.
Thanks
Edited by: user10439074 on Oct 30, 2008 4:03 AM

Read the documentation (I have given following links assuming you are running a 32 bit architecture)
Server installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14316%2Ftoc.htm&remark=portal+%28Books%29
Client installations:
http://www.oracle.com/pls/db102/to_toc?pathname=install.102%2Fb14312%2Ftoc.htm&remark=portal+%28Books%29
You can find the required books (if not using 32 bit architecture) from
http://www.oracle.com/pls/db102/portal.portal_db?selected=3

How to configure quality process with batch management.

Dear Friends,
we have a scenario,our client receive goods with 101movement type into quality inspection stock.
once stock is passed quality check stock,then we will take into unrestricted stock with 321 movement type.
failed in quality test will be rejected.please give me suggestion how to map the scenario.while i am testing
the process in my sandbox,its asking batch number.its not allowing me to post unrestricted stock with 321
movement type.how to make batch as optional in this scenario?if batch is mainted for the material,how to
configure the process.we are not using QM module.
please suggest me.
Regards,
Varun

In Batch management config in Logistic general, Check for the movement type 101 & 321 whether batch creation has been activated to Manual, Automatic, or no creation. In your case it looks like for mvt 321 batch creation is set to manual & for 101 no creation.
if batch creation is set to manual, enter a manual batch no & proceed.
But to cross verify wheter 101 has generated batch or not please check the stocks in MMBE.
Hope this helps.
Regards
Mithun

How to configure UDDI Server with in EDK with a 4.5WS?

I'm trying to develop a crawler service using EDK5.0.1 with a 4.5ws portal.
To do this job, I have to deploy and coufigure a UDDI Server which is a requirement for services in 4.5ws.
After develping and deploying a crawler service, I created gadget server in the 4.5ws portal, and tried to add remote data source, but the popup window for datasource seems not to be able to find the crawler service and showed 'Empty Gadget Server'.
I think I set up the uddi server with a wrong way, but I don't know what I have to do more to set a uddi server.
Actually, after developing crawler service and sci service, I deployed these with DeployServlet which is a deploy toolkit offered by EDK.
With this deploying result, I modified the uddi.xml file and put that file into c:\program files\Plumtree\ptedk\5.0\devkit\config\java\uddi folder.
Is there any things to set for uddi server?
Can anybody provide me any advise on this?
Any help would be appricated.

The UDDI is used with web services in 4.5x. This is best described as a phone book of URLS for any web services installed in that machine. Those URLS will then point to the individual web services.
In 5.0 the UDDI server is not needed since it is replaced with the "Remote Server" and "Web Services" tabs. HOw to setup a UDDI with TOMCAT
UDDI can be setup to run with TOMCAT and I believe this is the only one provided in the EDK installer in the ptedk\5.0\devkit\java directory
Here's a little TOMCAT information. Web applications are deployed in a folder called "webapp". This case, we have a uddi server installed and it's in a folder called "uddi". So, our file structure for the UDDI server looks like: /webapp - tomcats web application folder /uddi - the uddi application /WEB-INF - standard WEB-INF directory stores java classes, jars and any descriptor files. server-config.wsdd - this is the web service descriptor file for this uddi server - provided by plumtree web.xml - this is the web.xml descriptor file for how the web services in this application will be loaded and run - provided by plumtree /lib - contains the jar files for the uddi server - provided by plumtree The server-config.wsdd file should be the only item that the user needs to modify. Within the file (XML based), there should be the following tag:  <service name="MessageService" provider="java:MSG" style="message"> <parameter name="allowedMethods" value="find_tModel find_business find_binding"/> <parameter name="className" value="com.plumtree.remote.uddi.UDDIServer"/>  <parameter name="baseUrl" value="http://rickc-loaner:81/ntcws/"/>  <parameter name="isDotNet" value="true"/>   <parameter name="crawlerName" value="NT File CWS"/>  <parameter name="authName" value=""/>  <parameter name="documentProviderRpc" value="DocumentProviderSoapPort"/>  <parameter name="containerProviderRpc" value="ContainerProviderSoapPort"/>   <parameter name="sciDataSourceRpc" value="SciSoapPort"/>  <parameter name="sciCrawlRpc" value="SciSoapPort"/>  <parameter name="sciCardRpc" value=""/>   <parameter name="authProvider" value=""/>  <parameter name="syncProvider" value=""/>  <parameter name="authSci" value=""/>  <parameter name="documentProviderDoclit" value="documentprovidersoapbinding.asmx"/>  <parameter name="containerProviderDoclit" value="containerprovidersoapbinding.asmx"/>   <parameter name="sciDataSourceDoclit" value="xuiservice.asmx"/>  <parameter name="sciCrawlDoclit" value="xuiservice.asmx"/>  <parameter name="sciCardDoclit" value="xuiservice.asmx"/> </service> This tag contains the information that will be specific to the user's deployment of the web service (CWS or AWS).First off: <parameter name="baseUrl" value="http://machinename:81/ntcws/"/>
This is the location of the web server that has the target web service installed. THIS CANNOT BE "localhost". This has to be a resolvable machine name or IP address. In 5.0 this is the Remote Web Service settings. Second, you need to set the type of web service.  <parameter name="isDotNet" value="true"/> If your app server hosting the web service is dotnet, you need to set this to "true". This is equivalent to the Document encoding setting in 5.0. .NET supports Document/Literal incoding instead of RPC for Java. Third, name your web services. This is the name that will display in the drop down list in 4.5WS when you decide to create a remote data source.  <parameter name="crawlerName" value="NT File CWS"/>  <parameter name="authName" value=""/> This is the web service name property when you create a new web service in 5.0. Next are the configuration settings for your particular web service:  <parameter name="documentProviderRpc" value="DocumentProviderSoapPort"/>  <parameter name="containerProviderRpc" value="ContainerProviderSoapPort"/>   <parameter name="sciDataSourceRpc" value="SciSoapPort"/>  <parameter name="sciCrawlRpc" value="SciSoapPort"/>  <parameter name="sciCardRpc" value=""/>   <parameter name="authProvider" value=""/>  <parameter name="syncProvider" value=""/>  <parameter name="authSci" value=""/>  <parameter name="documentProviderDoclit" value="documentprovidersoapbinding.asmx"/>  <parameter name="containerProviderDoclit" value="containerprovidersoapbinding.asmx"/>   <parameter name="sciDataSourceDoclit" value="xuiservice.asmx"/>  <parameter name="sciCrawlDoclit" value="xuiservice.asmx"/>  <parameter name="sciCardDoclit" value="xuiservice.asmx"/> These are equivalent to setting the Document provider URL, Container Provider URL, Remote UI URL etc etc that are in 5.0 web services settings. Once you have installed the UDDI server, and started TOMCAT, you should be able to hit the services list at:http://machinewithuddi:8080/uddi/services This will become your Remote Gadget Server URL and you should be good to go!!

How to configure Oracle Discoverer with EBS R12 ?

Dear
I hope, by default Oracle Discoverer is not configured with EBS R 12. How to configure it?
Any hlep, highly appreciated.

Ateeq,
Please refer to the following note, it should be helpful:
Note: 373634.1 - Using Discoverer 10.1.2 with Oracle E-Business Suite Release 12
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=373634.1

How to configure the SSL with SharePoint Site

my site is running on http.
When we create the new website it will ask about "Use Secure Sockets Layer (SSL): "
i have select the no and develop a site.
now i want to move it on httpshowever i want to configure this site with SSL certificate.. how can i move it to https?
any one help me how can i acess my site from https:// URL.
i have bought the SSL certificate.
waiting.........
its urgent.

I am also having an issue with adding and SSL cert to an existing site. I am also using a hostname vs the server name for the URL. Here is what I have done so far:
- Local MS DNS Entry (spsite.abccorp.com) point to the IP address of the SP server.
- ensured the port 80 and 443 boxes are filled in in IIS for the "Sharepoint - 80" site.
- Added Certificate to that IIS site, but did not make SSL required (so I could try both http and https without it barking).
- Under the Alternate Access Mapping Section of SP, I changed the URL from http://spsite.abccorp.com to https://spsite.abccorp.com for the "Sharepoint - 80" Collection. I even tried just added the https url to the "Custom" area vs the "Default"
After I have done all this, I get "Page Can Not Be Displayed" when going to the HTTPS site but works fine for the HTTP.
Any suggestions?

How to configure Axis stubs for Integrated Windows Authentication ?

Hi All,
I am trying to consume a web service on https and it uses .NET with Integrated Windows Authentication Security Mechanism. When I type the web service endpoint address in browser I am prompted for a login dialog and I login using username (in the format <domain name>\\<username>) and password given by the web service provider.
Now I have generated stubs using AXIS 1.2 Final but I dont know how to pass or set the credentials (domain, username, password) in my client program. I tried <stub object>.setUsername and <stub object>.setPassword methods but I am not able to connect to the service and I always get HTTP Error Code 401.2 from the service. I am not sure this is right way to set credentials in my code. I tried searching this mailing list but no avail. Can anyone please help me.
Thanks & Regards,
Kr.

Hello all - I ran into this and spent way too much time looking for the answer, however this is how I got it to work. My code was specific to getting SSRS authenication working so it should work with any NTLM authenciation via HTTP. setAuthenticateProperty() actually does the enabling of NTLM.
* Sets up the needed information to enable NTLM authentication for SOAP/HTTP calls..
* @author Brian Hayes
public class NTLMAuthenticator {
 private Authenticator authenticator;
 private String username;
 private String password;
 private String domain;
 private String host;
 private URL wsdlurl;
 * Uses the endpoint.getHost() as the host name to use for authentication.
 * <li> Generally the endpoint host is the target for actual authenciation.
 * 
 * @param endpoint -
 * The URL location of SSRS ReportExecution2005 wsdl.
 * @param username -
 * User name needed for NTLM authentication.
 * @param password -
 * Password needed for NTLM authentication.
 * @param domain -
 * Domain for the user needed for NTLM authentication.
 public NTLMAuthenticator( URL wsdlurl, String username, String password, String domain ) {
 this.wsdlurl = wsdlurl;
 this.host = wsdlurl.getHost();
 this.username = username;
 this.password = password;
 this.domain = domain;
 this.authenticator = null;
 * Instruct our NTLM authenticator to use setPreemptiveAuthentication or not. Default is true;
 * @return - true or false
 protected boolean usePreemptiveAuthentication(){
 return true;
 * The {@link Authenticator} is used to setup NTLM authentication to a webservice stub/client. 
 * Example: 
 * If you extended a Stub object, you would call getClient() or your Stub object. 
 * Then super._getServiceClient().getOptions().setProperty(HTTPConstants.AUTHENTICATE, getAuthenticator()); 
 * <li>This should work with any URL/Soap call but it has only been tested with axis2 stubs.
 * <li> This also used PreemptiveAuthentication.
 * @return - {@link Authenticator} object populated.
 public Authenticator getAuthenticator() {
 if (this.authenticator == null) {
 this.authenticator = new Authenticator();
 List<String> auth = new ArrayList<String>();
 auth.add(Authenticator.NTLM);
 authenticator.setAuthSchemes(auth);
 authenticator.setUsername(this.getUsername());
 authenticator.setPassword(this.getPassword());
 authenticator.setDomain(this.getDomain());
 authenticator.setHost(this.getHost());
 authenticator.setPreemptiveAuthentication(this.usePreemptiveAuthentication());
 return authenticator;
 public void setAuthenticator( Authenticator authenticator ) {
 this.authenticator = authenticator;
 public String getUsername() {
 return username;
 public void setUsername( String username ) {
 this.username = username;
 public String getPassword() {
 return password;
 public void setPassword( String password ) {
 this.password = password;
 public String getDomain() {
 return domain;
 public void setDomain( String domain ) {
 this.domain = domain;
 public String getHost() {
 return host;
 public void setHost( String host ) {
 this.host = host;
 public URL getWsdlurl() {
 return wsdlurl;
 public void setWsdlurl( URL wsdlurl ) {
 this.wsdlurl = wsdlurl;
* NTML Support for webservices where our webservice is protected via NTLM.
* @author Brian Hayes
public class NTLMReportExecutionServiceStub extends ReportExecutionServiceStub {
 private NTLMAuthenticator endpointAuthenticator;
 * Enables NTML authentication to our SSRS reports by setting the property via setAuthenticeProperty();
 * @param authenticator
 * @throws AxisFault
 public NTLMReportExecutionServiceStub( NTLMAuthenticator endpointauthenticator ) throws AxisFault {
 this(endpointauthenticator.getWsdlurl().toString());
 this.endpointAuthenticator = endpointauthenticator;
 this.setAuthenticeProperty();
 private void setAuthenticeProperty(){
 super._getServiceClient().getOptions().setProperty(HTTPConstants.AUTHENTICATE, this.getEndpointAuthenticator().getAuthenticator());
 public NTLMAuthenticator getEndpointAuthenticator() {
 return endpointAuthenticator;
 public void setEndpointAuthenticator( NTLMAuthenticator endpointAuthenticator ) {
 this.endpointAuthenticator = endpointAuthenticator;
 * Overrides the default URL location.
 * @param wsdlurl
 * @throws AxisFault
 private NTLMReportExecutionServiceStub( String wsdlurl ) throws AxisFault {
 super(wsdlurl);
}

How to configure SharePoint HNSC with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.

Could you please let me know how SharePoint HNSC can be configured with a reverse proxy server so that HNSC Share Point URLs are not exposed to end users.
In normal path based site collections/web applications, reverse proxy configuration can be done using alternate access mappings with Public URL = "proxy URL", internal = "HNSC Share Point URL" so that share point sends response back
to Public URL = "proxy URL".
In Host Named Site Collections, alternate access mappings are not supported. Each HNSC is designed to have only one URL in each zone. Zone is one of the five zones(Default,Intranet,Internet,Custom,Extranet) with each of which only one alternate
URL is associated. This is what we are able to get using power shell command "Set-SPSiteUrl", but this will not help us to get the response back to proxy URL after a request sent to share point because we could not find any mechanism in share
point HNSC to respond to a different URL(proxy URL). Consequently, Share Point URLs are exposed to external users.
Below share point article in MSDN blog is symmetrical to what we are observing with Share Point 2013 and Proxy Server. It mentions that internal HNSC URLs can’t be hidden using any proxy server. If hiding the internal Share Point URLS is a requirement,
it suggests to use a web application instead of host named site collections.
Though I’m also observing the same behavior with Share Point 2013 HNSC, Could you please confirm my understanding is correct.
http://blogs.msdn.com/b/kaevans/archive/2012/03/27/what-every-sharepoint-admin-needs-to-know-about-host-named-site-collections.aspx
Excerpt from above article-
"Host Named Site Collections Only Use One Host Name
Continuing on the discussion on AAMs and host named site collections, you cannot use multiple host names to address a site collection in SharePoint 2010. Because host-named site collections have a single URL, they do not support alternate access mappings and
are always considered to be in the Default zone. This is important if you are using a reverse proxy to provide access to external users. Products like Unified Access Gateway 2010 allow external users to authenticate to your gateway and access a site
as http://uag.sharepoint.com and forward the call to http://portal.sharepoint.com. Remember that URL rewriting is not permitted. Further, a site collection can only respond to one host name. This means if you are using a reverse proxy, it must forward the
calls to the same URL. If your networking team has a policy against exposing internal URLs externally, you must instead use web applications and extend the web application using an alternate access mapping."<u5:p></u5:p>

Hi Satish,
You are right that only one URL is allowed for each zone of the host-name site collections in both SharePoint 2010 and SharePoint 2013.
It is by design that each host-name site collection only support one URL for each zone.
The article below is about RTM version of SharePoint, and it is the same for SharePoint 2013 with the latest CU.
https://support.microsoft.com/en-us/kb/2826457
So to make the URL of HNSC not exposed to external users is not supported, you need to use path-based sites instead.
Best regards.
Thanks
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Qosmio F60-L10 - How to configure tv tuner with integrated antenna?

Similar Messages

Maybe you are looking for