Qosmio F750-10V - Intel Widi issues

Hi there!
I'm having some issues with my Toshiba Laptop! It seems like I can't get 5.1 sound through my Widi, I cant play protected Blu-rays either.
I figured I had an old Widi software or an old Intel HD graphic driver, but i can't find anything newer. This is what I got:
Intel Widi: version 2.1.42.0
Intel HD: 8.15.10.2509 with the date: 2011-08-31 which seems old.
And when I look [at this site over at Intel|http://www.intel.com/support/wireless/wtech/iwd/sb/CS-032474.htm?wapkw=(widi)] it looks like the Toshiba laptops needs a special driver update.
+"Toshiba* systems with Intel WiDi require a custom graphics driver to enable Blu-Ray, DVD, and Intel Insider movie playback over Intel WiDi. Please check with Toshiba to obtain the correct graphics driver for your system."+
Does anyone have a clue which driver they mean?
Other than this the widi-software works like a charm. :)
/Simon

Hi mate
Found some interesting info for you:
Here are system requirements for the Intel Wireless Display (WiDi)
http://aps2.toshiba-tro.de/kb0/FAQ1A037S0000R01.htm
and here you can find info about
Intel Wireless Display (WiDi) known issues
http://aps2.toshiba-tro.de/kb0/FAQ1A037T0000R01.htm
Could it be helpful?

Similar Messages

Qosmio F750 - How to change dedicated graphics memory to 2GB...

In order to get my Qosmio F750 ready to run some games, I have updated all of the drivers on via the toshiba website and NVIDIA website while also downloading the relevant software. This includes updating the BIOS to version 2.00.
According to the [laptop specifications given on the Toshiba website|http://www.mytoshiba.com.au/products/computers/qosmio/f750/pqf75a-02y00q/specifications],
I should have the following allocation of memory to the graphics:
"4095MB Total: 2048MB dedicated memory + 2047MB shared memory"
When I go to check the Performance Information and Tools window, I get shown the following information:
Graphics
Display adapter type Intel(R) HD Graphics 3000
Total available graphics memory: 1696 MB
Dedicated graphics memory: 64 MB
Dedicated system memory: 0 MB
Shared system memory: 1632 MB
Display adapter driver version: 9.18.13.1422
Primary monitor resolution: 1366x768
DirectX version: DirectX 10
Of course, when I look carefully at the laptop specifications, I realize that the current graphics memory allocation corresponds to the Power Saving Mode i.e. graphics allocation when running on battery power
Normally this would be fine, however, I do not see any change in the info displayed even when I am running on AC power.
I have checked all of my power settings but even when everything is set to 'performance mode', the information displayed stays the same.
I try to look in the system bios to manually change the graphics allocation but no such option exists. Rather all options are set to performance mode...
So my ultimate question is, *How can I change the graphics memory allocation to performance mode as indicated in the system specifications?*
Is this something that occurs automatically without changing the displayed info?
Is there a driver that I have forgotten to update? Has a driver update caused this?
Has a BIOS update caused this?
On a side note, when checking the DirectX Diagnostic Tool, I the directx version is displayed as version 11. So I thought the issue was with the displayed information. But even on the Diagnostic Tool gives me the same info.
I would be very grateful if someone could help me out with this.
Thanks,
Omair

Okay I think I get it now.
The Performance Info and Tools Window only shows the information on the Intel HD Graphics 3000.
When the specs sheet says power saving mode it means graphics using only the Intel HD Graphics.
However because of Optimus, the notebook can use either the Intel GRaphics card or the nVidia GPU.
The performance mode in the specs sheet refers to when the notebook is using the nVidia GPU.
The integrated gpu and the dedicated gpu do not run at the same time but Optimus switched between the 2 of them whenever the situation requires it. Whatever it switches to decides which 'mode' the notebook is using. The memory allocations for these 'modes' will match those of the specs sheet.
But any information about the graphics memory will not change as it only displays the info on the integrated gpu.
Well, I can finally understand what the previous posts were referring to and why the posts themselves were pretty short (there wasn't any problem needing to be fixed!).
Thank you for all of your help Randy, Akuma and PauPau

Qosmio F750 - Cannot get some functions to work after Win 8 uprgade

I own a Qosmio F750-125, PQF75E.
Since I upgraded to Win 8, utilizing Toshiba Upgrade Assistant I might add, I had some issues.
Most importantly not being able to get my Toshiba Blu-ray player to install.
Eventually I managed, still don't exactly how but anyway, to install the latest version 1.0.0.5.70A.
The problem now is that the 3D function still don't seem to work.
When I open a 3D movie I only get the picture to display side by side, despite clicking on the 3D button.
I tried to update the Nvidia driver (v290) to the latest version v314, available on Nvidia site, for for my GeForce GT540M graphics card but every time I get a message that the driver cannot find compatible driver hardware. Eventually from within the upgrade files downloaded by Toshiba Upgrade Assistant I managed to install the v306. I am still however unable to install v 314, after the "system check" I still get the message that the driver can find compatible driver hardware.
However, the 3D still does not work. I notice that the face detection (SuperD Xtune) does not automatically start with the Blu-ray player when I launch or open a 3D file to be played by the Toshiba Blu-ray player, as it used to.
How can I get my Blu-ray Player to play my 3D properly again.
If I open Xtune I am able to calibrate the 3D and then it closes.
I do not see a app under all apps which seem to have anything to do with the face detection function.
Is there a setting that need to be changed, an additional driver to be installed or what?
I am really disappointed with the support I have received from Toshiba themselves on this issue.
I also wanted to update the BIOS of my laptop.
My bios version is 2 dating December 2011 but I notice that a newer BIOS is available from Toshiba Website dating February 2012, if I am not mistaken.
I downloaded that but when I run it I receive a message that my computer is not compatible.
**bleep** this is frustrating.
I want to get my 3D function back and be sure to run the latest and most appropriate drivers, at all times.

Dear Tonny
Thank you for patiently answering to my posts.
You are right, despite extensive notes in the Toshiba Step-by-Step upgrade guide and specific mention that the Blu-ray player can only be installed by using the Upgrade Assistant, it is not installed by the Toshiba Upgrade Assistant.
I am not sure though whether it actually did form part of the downloaded files but never the less I installed it by some miracle manually.
It did not want to install at first. I received a message that the player could not be found. I noticed that the player is a sMedio Inc player and I then searched sMedio Inc and download their WinDVD Pro player. After that the Blu-ray driver from Toshiba installed.
I also have it that v1.0.0.5.70A is the latest driver but through my local Toshiba Agent (MUSTEK) I received a driver from Germany and it was 1.0.0.5.48. I have not installed that as yet.
I am convinced that the problem lies with the interaction between the Blu-ray Player, Nvidia driver and SuperD software.
I searched my installed files and saw that I have Super D spd2900g and Super D X-tune installed. I uninstalled both and tried to re-install it form the file included in the Toshiba Upgrade Assistant (Super D IC Driver).
However only the Super D spd2900g part installed and the Super D X-tune part is now missing.
NOW I am completely BUGGERED because I do not know where to find the X-tune program to reinstall it.
SuperD's website is very basic, in fact somewhat primitive.
Thanks you also for the links, I have seen them somewhere and have had regard thereto but they are outdated.
They relate to much older versions and windows 7 not 8.
I must be honest, the poor response and support from Toshiba will most definitely lead to me not buying their product again. None of the so called technicians have help me achieve anything. I struggled and figured out everything myself so far.
I still also have no answer in respect of the BIOS upgrade issue. Is there no one I can contact directly.

Intel WiDi Istallation

I wanna connect my Laptop to my smart panasonic TV through wireless , for this laptop need to download Intel WiDi software but when i download it error is come that " intel wifi adaptor exist' how i can proceed for wireless connection to TV

Hi ,
Thank you for visiting the HP Support Forums and Welcome. It is a great site for information and questions. I have looked into your issue about your HP Pavilion g6-2320tx Notebook and trying to connect to your Panasonic Smart TV. You do have to connect your TV to the Wireless router first. Here is a link to help you connect the to the WiDi software. If gives you step by step instructions how to connect the TV to your Notebook. I hope this helps, please let me know how this goes. Thanks.

Qosmio F750-11U - Have you written Blu-Ray discs?

Hi,
has anyone written any Blu-rays? If so, did everything work ok?
Which type did you use? BD-R or what? How many GB yould you write?
From which manufacturer?
I've read that there are "issues" with BD writers...
Mine is a F750-11U.
Thanks,
i2B

I found info about the compatible disk which are supported by the optical Disk Drive of Qosmio F750
*Read*
CD-ROM 24x(Max)
CD-R 24x(Max)
CD-RW 24x(Max)
DVD-ROM 8x(Max)
DVD-R 8x(Max)
DVD-R DL 8x(Max)
DVD-RW 8x(Max)
DVD+R 8x(Max)
DVD+R DL 8x(Max)
DVD+RW 8x(Max)
DVD-RAM 5x(Max)
BD-ROM 6x(Max)
BD-R 6x(Max)
BD-R DL 6x(Max)
BD-R TL 4x(Max)
BD-R QL 4x(Max)
BD-RE 5x(Max)
BD-RE DL 5x(Max)
BD-RE TL 2x(Max)
*Write*
CD-R 24x(Max)
CD-RW 4x(Max)
HS CD-RW 10x(Max)
US CD-RW 16x(Max)
DVD-R 8x(Max)
DVD-R DL 4x(Max)
DVD-RW 6x(Max)
DVD+R 8x(Max)
DVD+R DL 4x(Max)
DVD+RW 8x(Max)
DVD-RAM 5x(Max)
BD-R 6x(Max)
BD-R DL 4x(Max)
BD-R TL 4x(Max)
BD-R QL 4x(Max)
BD-RE 2x(Max)
BD-RE DL 2x(Max)
BD-RE TL 2x(Max)
*Compatibility*
CD-R, CD-RW, DVD-R SL,DL, DVD-RW, DVD+R SL,DL, DVD+RW, DVD-RAM, BD-R SL,DL, BD-RE SL,DL, CD-ROM, DVD-ROM, BD-ROM
From my own experience some disk from different manufacturers might not be fully supported... well in such case you will need to try disk from another manufacturer....

Intel WiDi and Miracast

I have an HP Pavillion g6-2010nr Notebook PC . It's came with Windows 7. I want to use a wireless display adapter to wirelessly display (mirror) my laptop screen on TV. It requires that my laptop be "Intel WiDi and Miracast" enabled. Is my laptop Intel WiDi and Miracast enabled? Do I have to install something? or can Windows 7 not do it? If Windows 7 can do it, how do I get it to connect? I know on Windows 8 there is a project option that allows you to connect to a TV, but I'm not sure where to find that option on Windows 7. I am a newbie, so the more details... the better.
Thanks
This question was solved.
View Solution.

Hi,
No. The following specs shows it does not meet WiDi requirements:
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03377517
BUT if you wish, please use the following tool to confirm:
http://supportkb.intel.com/wireless/wireless-display/templates/selfservice/intelwidi/#portal/1026/ar...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

40TL938 and Intel WiDi (Wireless Display)

Hi All,
Recently I've purchased Toshiba 40TL938 TV. As far as I understand it is WiDi capable thus it has WiDi receiver/adapter bulit in and could work as wireless display.
I managed to test the WiDi connection and tried with my Lenovo T420 laptop which is also WiDi capable. I've installed all required updates for gfx and wifi, enabled My Wifi addon and installed Intel WiDi application. That is all required and all went OK.
I've updated software in my TV to latest one available through Wifi update (july 2013)
Unfortunately - no success at all. Lenovo see no TV. Configuration of TV is quite obvious and nothing sophisticated could be done there. TV is able to connect to my wifi network and see T420 over network (because it sees it as network player).
Is there something that I don't understand or doing wrong? Is TL938 WiDi capable because it has WiDi receiver built in or it is just compatible with external WiDi dongles? If the answer is yes for the second question then technical specification for this TV is very wrong - this is not WiDi enabled TV at all and this is misleading.
Greets,
Tomek

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region.
- Peter

Qosmio F750 -How to watch movie or smth else in 3D mode?

Before i've bought this laptop, i saw plenty of clips and read a lot of articles about easy 3d mode when cam is watching for your eyes. Now I cant find any software which can do so. I've found only Toshiba Video Player, but it plays only DVD or mpeg format files, and i want to watch avi format for example. Is it possible?

> I thought that all F750 models are supplied with glasses-free display.
http://eu.computers.toshiba-europe.com/innovation/series/Qosmio-F750-series/1108007/
+It comes with a ground-breaking glasses-free 3D display *or* a TruBrite HD display with LED backlighting and NVIDIA graphics, delivering consistently stunning visuals+
According to the information on Toshiba pages and other internet pages, there are different Qosmio F750 units which supports different hardwareso always check the specifications of every single model .
_for example_
*Qosmio F750-11M*
Display: type : Toshiba TruBrite FHD glasses-free 3D TFT High Brightness display with LED backlighting and 16 : 9 aspect ratio
internal resolution : 2D mode: 1920 x 1080, 3D mode: equivalent to 1,366 x 768
response time rise + fall (Typ.) : 8 ms
Or
*Qosmio F750-10N*
http://za.computers.toshiba-europe.com/innovation/product/Qosmio-F750-10N/1111518/
type : Toshiba TruBrite HD TFT High Brightness display with LED backlighting and 16 : 9 aspect ratio
internal resolution : 1,366 x 768

Connecting Laptop to TV using Intel WIDI to watch Sky

Has anyone connected their laptop using Intel WIDI to a smart TV to watch Sky?I am continually getting an error and it looks like its being blocked by Sky.Using Amazon Prime or IPlayer and Netflix works fine, so i know teh SW and HW are functioning.If HDMI is used it works fine but i dont want to use a cable.

Only HDMI will carry the Aduio and Video together, if you use VGA, a audio cable is still required in the headphone jack to carry the sound to the TV.

Qosmio G40-108: starange display issue with highest resolution

I just got mine but on its highest resolution all webpages have these 11 semi-rectangular blocks, barely visible, only the bottoms, each about an inch long, is this normal and should i send it back to be investigated?

Hello
It is very nice to hear that you already have newest Qosmio notebook. About your issue I can not say much because without one screenshot it is not easy to understand what you mean exactly. On my Qosmio G30 (with the same HD resolution) I have no problems at all. Because of that I can really not understand what is wrong there.
If possible post a link where we can see how it looks like. Your description is not enough.
BTW: have you noticed this on web pages only?

Cannot use Intel widi with my Satellite L50-A-11T

Hi,
I have a Satellite L50-A-11T and i've tried to use Intel widi with Windows 8.1 and doesn't work, it says that the system is not compatible.
With Windows 8 it was ok and worked fine, but in the instruccions for upgrading it said to remove Intel widi.
Why is that?
Thanks in advance.

You misunderstood this info.
Intel WiDi isnt supported in Win 8.1 on Toshiba notebooks BUT instead of Intel WiDi you can use Miracast.
But Intel WiDi is not Miracast.
Intel WiDi was developed by Intel.
Miracast is an standard supported by developed by WiFi Allianz and Intel is a part of this Allianz
Windows 8.1 as well as Android 4.2 support the Miracast standard.
But this does not mean that you can use it always you need the compatible hardware parts.
In case your TV would not support Miracast standard, you will not be able to use it

Qosmio F750 and external 3D monitor

I can connect the IR emitter for use nvidia active shutter glasses and a 3D external monitor ? such as a video projector 3D?
How do I install the driver emitter?

To be honest Im a little bit confused.
Not quite sure what you do exactly.
Let's clarify some basic things.
The Qosmio F750 "glasses-free 3D" notebook was equipped with special internal autostereoscopic 3D display which does not require additional usage of 3D glasses.
The technology is called active lens which use the internal webcam to scan and control the eye position (face tracking) in order to ensure best 3D effect.
If you want to watch 3D on external monitor, you need a monitor which would support 3D technology (120Hz) and special 3D Vision 2 Wireless Glasses Kit because the Nvidia 3D Vision technology is designed for use with active shutter glasses and 120Hz monitors.
You can of course also play BD 3D movies using the integrated Blu-ray optical drive and the bundled player also on an external 3D TV connected to the notebooks HDMI 1.4 video output.
The 3D TVrequires 3D glasses too.

Use of Lenovo WD100 with Intel WIDI and Windows 7 - PIN problem

I recently bought the adapter Lenovo WD100.
It works fine when connected to my Samsung S4.
But I am unable to use it with my PC.
The PC has an Intel I7 processor, Windows 7 and the Intel WIDI 4.2 software.
When I open the window of the software WIDI 4.2, the PC find immediately the adapter WD100 but when I try to connect it asks me to enter the PIN that should appear on the TV.
Unfortunately no PIN appears on the TV.
Does anyone have any idea where to find this PIN?
Is there a way to read it in some files in your PC?
Thanks

Hi John:
Thanks but, I had already done this. I was having THAT problem with Encore (could not even initialize before tanking) when I first installed it and that's when I updated the Roxio engine. I don't know what else there is to update or correct at this point.
There was one thing that occurred to me: When I was using XP, I had to disable Open GL in order to get Encore to stabilize. I've heard one recommendation for Encore that one must disable graphics acceleration. I would like try that here except I can't figure out how to do that in Windows 7.
I've been Googling "Windows 7 Disable Graphics Accel" and have come up with nothing useful.
Thanks for your help though and if you have any other ideas, I'm all ears.
Mark

Qosmio F750 Toshiba applications have stopped working suddenly

Hi there,
can anyone help me?
All toshiba applications in my Toshiba Qosmio F750 have stopped working. Including Toshiba bulletin board, tohsiba blu-ray disc player, toshiba reeltime, etc... I don't know why and when it stopped working... please help me anyone :(

> I don't know why and when it stopped working
For us here on this forum is also not easy to understand what is the reason for your problem.
For that reason I also think best and of course the easiest way to fix all this is OS reinstallation.
Start to use your notebook with factory settings again. With clean recovery image installation everything will be perfect again.

Qosmio F750 - 2D - 3D conversion.

Hi.
First post here.
I have a Toshiba Qosmio F750 3d with Windows7 64 bit installed. Model #PQF75E-036008EN.
All drivers and software are up to date using the Toshiba Tempro and software updates messages etc.
I've searched the forum data base to ask how do I convert my Blu Ray DVD into 3D?
I do have the glass less 3d LED 15.6" inch display and can see the demo version 3d clips, that Toshiba installed onto my laptop.
Am I correct in believeing that the Toshiba Blu Ray player software, can convert stock Blu Ray films into 3D, to be played back using the Toshiba Bla Ray player?
There is a 2d -3d tab on this player. I'd like to play my collection of standard 2D blu ray movies in 3D.
Or, do I have to purchase a full 3D movie in the first place.
al.any help is appreciated.

> Am I correct in believing that the Toshiba Blu Ray player software, can convert stock Blu Ray films into 3D, to be played back using the Toshiba Blu Ray player?
On your notebooks system two different players are installed: WinDVD BD for Toshiba and Toshiba video player.
WinDVD BD for Toshiba this software can be used to play the 3D blu-ray disk.
This software does NOT support the 2Dto3D conversion function!
Toshiba video player: this software plays DVDs and video files. This software supports the 2Dto3D conversion function and 2D DVD-VR and video files can be converted to 3D.
Note: 3D occurs only in full screen size. So when you enable the 3D playback, the video automatically enlarges to full screen size.

Qosmio F750-10V - Intel Widi issues

Similar Messages

Maybe you are looking for